Re: [FreeBSD] tar: Unrecognized archive format: Inappropriate file type or format
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 merhaba, iki ihtimal aklima geliyor. 1. olustururken -zcvf kullanmissaniz yani (gzip yapmissaniz) acarken de - -zxvf kullanmaniz lazim. 2. media bozuldu. selamlar... Baris Simsek ++ + http://www.enderunix.org/simsekhttp://www.endersys.com + + EnderUNIX SDT @ Tr Endersys Consultancy Ltd. + + simsek ~ enderunix.org baris.simsek ~ endersys.com + + Volunteer, Software Developer Director+ ++ Abdullah OZTURK yazmış: tar –cvf /dev/sa0 /data ile olusturmus oldugum datalari tar -tvf /dev/sa0 ile gormek istedigimde tar: Unrecognized archive format: Inappropriate file type or format gibi bir hata veriyor. Kaset ile ilgili bilgiler asagidaki gibidir. dmesg | grep -i sa0 | grep -v isa0 sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 40.000MB/s transfers (sa0:umass-sim0:0:0:0): lost device (sa0:umass-sim0:0:0:0): removing device entry sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 1.000MB/s transfers (sa0:umass-sim0:0:0:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): MEDIUM ERROR info:2800 asc:11,0 (sa0:umass-sim0:0:0:0): Unrecovered read error (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): failed to write terminating filemark(s) (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): lost device (sa0:dead_sim0:0:0:0): removing device entry sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 1.000MB/s transfers (sa0:umass-sim0:0:0:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted mt geteotmodel /dev/nsa0: the model is 2 filemarks at EOT mt status gate# mt status Mode Density Blocksize bpi Compression Current: 0x47 variable 0DCLZ -available modes- 0:0x47 variable 0DCLZ 1:0x47 variable 0DCLZ 2:0x47 variable 0DCLZ 3:0x47 variable 0DCLZ - Current Driver State: at rest. - File Number: 0 Record Number: 0Residual Count 0 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFzFPgwTwmSBQynysRAnqhAJ9KNSVc0sWqzzf3HAVIpLZ100hLFACg1Yl5 YNg2n5LkrxXiZfosAG828KU= =ZVIv -END PGP SIGNATURE- - Listeye soru sormadan once lutfen http://ipucu.enderunix.org sitesine bakiniz. Cikmak icin, e-mail: [EMAIL PROTECTED] Liste arsivi: http://lists.enderunix.org Turkiye'nin ilk FreeBSD kitabi: http://www.acikakademi.com/catalog/freebsd
RE: [FreeBSD] tar: Unrecognized archive format: Inappropriate file type or format
Olusturma; Tar -cvf /dev/sa0 /data Dogru yazip yazmadigini ve tape icini gormek icin asagidaki komutu yaziyorum; tar -tvf /dev/sa0 kaseti yeni aldim ve kayit I yukardaki sekilde olustup denemek icin okuttugumda Verdi bu hatayi... -Original Message- From: Baris Simsek [mailto:[EMAIL PROTECTED] Sent: Friday, February 09, 2007 1:59 PM To: freebsd@lists.enderunix.org Subject: Re: [FreeBSD] tar: Unrecognized archive format: Inappropriate file type or format -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 merhaba, iki ihtimal aklima geliyor. 1. olustururken -zcvf kullanmissaniz yani (gzip yapmissaniz) acarken de - -zxvf kullanmaniz lazim. 2. media bozuldu. selamlar... Baris Simsek ++ + http://www.enderunix.org/simsekhttp://www.endersys.com + + EnderUNIX SDT @ Tr Endersys Consultancy Ltd. + + simsek ~ enderunix.org baris.simsek ~ endersys.com + + Volunteer, Software Developer Director+ ++ Abdullah OZTURK yazmış: tar -cvf /dev/sa0 /data ile olusturmus oldugum datalari tar -tvf /dev/sa0 ile gormek istedigimde tar: Unrecognized archive format: Inappropriate file type or format gibi bir hata veriyor. Kaset ile ilgili bilgiler asagidaki gibidir. dmesg | grep -i sa0 | grep -v isa0 sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 40.000MB/s transfers (sa0:umass-sim0:0:0:0): lost device (sa0:umass-sim0:0:0:0): removing device entry sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 1.000MB/s transfers (sa0:umass-sim0:0:0:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): MEDIUM ERROR info:2800 asc:11,0 (sa0:umass-sim0:0:0:0): Unrecovered read error (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): failed to write terminating filemark(s) (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): lost device (sa0:dead_sim0:0:0:0): removing device entry sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 1.000MB/s transfers (sa0:umass-sim0:0:0:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted mt geteotmodel /dev/nsa0: the model is 2 filemarks at EOT mt status gate# mt status Mode Density Blocksize bpi Compression Current: 0x47 variable 0DCLZ -available modes- 0:0x47 variable 0DCLZ 1:0x47 variable 0DCLZ 2:0x47 variable 0DCLZ 3:0x47 variable 0DCLZ - Current Driver State: at rest. - File Number: 0 Record Number: 0Residual Count 0 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFzFPgwTwmSBQynysRAnqhAJ9KNSVc0sWqzzf3HAVIpLZ100hLFACg1Yl5 YNg2n5LkrxXiZfosAG828KU= =ZVIv -END PGP SIGNATURE- - Listeye soru sormadan once lutfen http://ipucu.enderunix.org
Re: [FreeBSD] tar: Unrecognized archive format: Inappropriate file type or format
Selamlar, Teybi basa sardiniz mi? Iyi calismalar dilerim. N. Ersen SISECI www.enderunix.org Abdullah OZTURK yazmış: Olusturma; Tar -cvf /dev/sa0 /data Dogru yazip yazmadigini ve tape icini gormek icin asagidaki komutu yaziyorum; tar -tvf /dev/sa0 kaseti yeni aldim ve kayit I yukardaki sekilde olustup denemek icin okuttugumda Verdi bu hatayi... -Original Message- From: Baris Simsek [mailto:[EMAIL PROTECTED] Sent: Friday, February 09, 2007 1:59 PM To: freebsd@lists.enderunix.org Subject: Re: [FreeBSD] tar: Unrecognized archive format: Inappropriate file type or format -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 merhaba, iki ihtimal aklima geliyor. 1. olustururken -zcvf kullanmissaniz yani (gzip yapmissaniz) acarken de - -zxvf kullanmaniz lazim. 2. media bozuldu. selamlar... Baris Simsek ++ + http://www.enderunix.org/simsekhttp://www.endersys.com + + EnderUNIX SDT @ Tr Endersys Consultancy Ltd. + + simsek ~ enderunix.org baris.simsek ~ endersys.com + + Volunteer, Software Developer Director+ ++ Abdullah OZTURK yazmış: tar -cvf /dev/sa0 /data ile olusturmus oldugum datalari tar -tvf /dev/sa0 ile gormek istedigimde tar: Unrecognized archive format: Inappropriate file type or format gibi bir hata veriyor. Kaset ile ilgili bilgiler asagidaki gibidir. dmesg | grep -i sa0 | grep -v isa0 sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 40.000MB/s transfers (sa0:umass-sim0:0:0:0): lost device (sa0:umass-sim0:0:0:0): removing device entry sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 1.000MB/s transfers (sa0:umass-sim0:0:0:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): MEDIUM ERROR info:2800 asc:11,0 (sa0:umass-sim0:0:0:0): Unrecovered read error (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): failed to write terminating filemark(s) (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): lost device (sa0:dead_sim0:0:0:0): removing device entry sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 1.000MB/s transfers (sa0:umass-sim0:0:0:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted mt geteotmodel /dev/nsa0: the model is 2 filemarks at EOT mt status gate# mt status Mode Density Blocksize bpi Compression Current: 0x47 variable 0DCLZ -available modes- 0:0x47 variable 0DCLZ 1:0x47 variable 0DCLZ 2:0x47 variable 0DCLZ 3:0x47 variable 0DCLZ - Current Driver State: at rest. - File Number: 0 Record Number: 0Residual Count 0 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFzFPgwTwmSBQynysRAnqhAJ9KNSVc0sWqzzf3HAVIpLZ100hLFACg1Yl5 YNg2n5LkrxXiZfosAG828KU= =ZVIv -END PGP SIGNATURE- - Listeye soru sormadan once lutfen http://ipucu.enderunix.org sitesine
RE: [FreeBSD] tar: Unrecognized archive format: Inappropriate file type or format
Backup sonrasi Mt -f /dev/sa0 rewind Mt -f /dev/sa0 offline Bitiriyorum -Original Message- From: N. Ersen ŞİŞECİ [mailto:[EMAIL PROTECTED] Sent: Friday, February 09, 2007 2:36 PM To: freebsd@lists.enderunix.org Subject: Re: [FreeBSD] tar: Unrecognized archive format: Inappropriate file type or format Selamlar, Teybi basa sardiniz mi? Iyi calismalar dilerim. N. Ersen SISECI www.enderunix.org Abdullah OZTURK yazmış: Olusturma; Tar -cvf /dev/sa0 /data Dogru yazip yazmadigini ve tape icini gormek icin asagidaki komutu yaziyorum; tar -tvf /dev/sa0 kaseti yeni aldim ve kayit I yukardaki sekilde olustup denemek icin okuttugumda Verdi bu hatayi... -Original Message- From: Baris Simsek [mailto:[EMAIL PROTECTED] Sent: Friday, February 09, 2007 1:59 PM To: freebsd@lists.enderunix.org Subject: Re: [FreeBSD] tar: Unrecognized archive format: Inappropriate file type or format -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 merhaba, iki ihtimal aklima geliyor. 1. olustururken -zcvf kullanmissaniz yani (gzip yapmissaniz) acarken de - -zxvf kullanmaniz lazim. 2. media bozuldu. selamlar... Baris Simsek ++ + http://www.enderunix.org/simsekhttp://www.endersys.com + + EnderUNIX SDT @ Tr Endersys Consultancy Ltd. + + simsek ~ enderunix.org baris.simsek ~ endersys.com + + Volunteer, Software Developer Director+ ++ Abdullah OZTURK yazmış: tar -cvf /dev/sa0 /data ile olusturmus oldugum datalari tar -tvf /dev/sa0 ile gormek istedigimde tar: Unrecognized archive format: Inappropriate file type or format gibi bir hata veriyor. Kaset ile ilgili bilgiler asagidaki gibidir. dmesg | grep -i sa0 | grep -v isa0 sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 40.000MB/s transfers (sa0:umass-sim0:0:0:0): lost device (sa0:umass-sim0:0:0:0): removing device entry sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 1.000MB/s transfers (sa0:umass-sim0:0:0:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): MEDIUM ERROR info:2800 asc:11,0 (sa0:umass-sim0:0:0:0): Unrecovered read error (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): failed to write terminating filemark(s) (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): lost device (sa0:dead_sim0:0:0:0): removing device entry sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: HP C7438A ZU5A Removable Sequential Access SCSI-3 device sa0: 1.000MB/s transfers (sa0:umass-sim0:0:0:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted mt geteotmodel /dev/nsa0: the model is 2 filemarks at EOT mt status gate# mt status Mode Density Blocksize bpi Compression Current: 0x47 variable 0DCLZ -available modes- 0:0x47 variable 0DCLZ 1:0x47 variable 0DCLZ 2:0x47 variable 0DCLZ 3:0x47 variable 0DCLZ - Current Driver State: at rest. - File Number: 0 Record Number: 0Residual Count 0
