Ok, I'll check it out. Thanks!
On Wed, Oct 4, 2023 at 2:21 AM Andrey V. Elsukov wrote:
> On 04.10.2023 03:02, Kevin Oberman wrote:
> >
> > I had a problem with one network and had to restart (service
> > wpa_supplicant restart wlan0). My Iv4 came up file, but IPv6
I had a problem with one network and had to restart (service wpa_supplicant
restart wlan0). My Iv4 came up file, but IPv6 does not come up. Interface
has only link-local address. When I boot to the same AP, it comes up fine.
Any idea what I'm missing?
--
Kevin Oberman, Part time kid herder
st a fix?
>
> Reboot did not solve, no software updates made, no config changes, just
> stop working from one day to the next.
>
> Thank you.
>
> --
> José Pérez
>
Oddly, ENOBUFS is the error I get when my firewall is blocking transmit
traffic. There may well be other causes.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
> ifconfig_bce0_ipv6="inet6 accept_rtadv"
> >
> Thank You so much. That works here too. I wonder if this deserves a
> document somewhere?
> It's NOT intuitively obvious that:
> a) Order in /etc/rc.conf matters
> b) the fe80 address influences the global address
>
I don't see how 'a' is possible. All rc.conf does is defne a bunch of
environmental variables. I don't see any way the order is relevant other
than that a later definition of a variable overriding an earlier one. What
am I missing here?
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
ough to work well before splitting. If you have a friend who is a ham
radio operator, they could help a lot.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
a problem indicator? If so, what should I look for. Otherwise, how
can I stop these messages from filling my log?
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
Thanks! This is really great news!
One question though. The status report shows the iwl driver as supporting
"7k/8k/9k/22k" devices. In the insanity of product models vs. chip models
vs. marketing names, is the AX200 one of these?
--
Kevin Oberman, Part time kid herder and retir
a bit. It's just really hard to do anything with a laptop with no
WiFi connectivity.
Thanks in advance!
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
g top
or building large ports with no problems.
I do recall a time when my terminal emulator would occasionally freeze, but
I have not seen it for quite a while. I use mate-terminal. This was a
problem with the emulator, though, and also would lock up local operation
as well as ssh sessions.
--
Have you loaded kernel modules for other algorithms? I believe only newreno
is in the default kernel. "man 4 mod_cc" for available modules and other
information.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP F
Use tcpdump(1) and/or net/wireshark(5). See man tcpdump and pcap-filter for
usage details. wireshark can analyze files collected by tcpdump and dissect
the packets. It can also do packet capture, itself.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober
On Thu, Sep 5, 2019 at 8:56 PM Victor Sudakov wrote:
> Hiroki Sato wrote:
> > va> Can any IPv6 unicast or link-local address be configured as an
> anycast
> > va> address of a router?
> >
> > Yes. There is no restriction about address scope.
> >
> > You might want to read RFC 4291, which
nfig igb0 up
>
> I think the problem is when the network card loses ethernet link and then
> errors occurs with non-working interface.
>
No idea whether it will do the trick, but you might try "service netif
restart ibg0". It does a lot more than just down-up of the int
y most OSes
including Windows, MacOS, Linux and FreeBSD that IPv6 and IPv4 will be
enabled by default. As time goes on, it will likely be more and more likely
that disabling IPv6 will become difficult if networks are used at all. It
already really requires a custom kernel to completely remove it and,
un
SLAAC without rtsold, but it may not prove stable as it is not possible to
deal with router changes after network startup. (I do run rtsold on my
laptop even though I only need it when not connecting to my home network
and that net supports IPv6.)
--
Kevin Oberman, Part time kid herde
On Tue, Aug 28, 2018 at 5:17 PM Marius Halden wrote:
> On Wed, Aug 29, 2018, at 01:50, Kevin Oberman wrote:
> > On Tue, Aug 28, 2018 at 1:14 PM Marius Halden wrote:
> >
> > > On Tue, Aug 28, 2018, at 21:34, Navdeep Parhar wrote:
> > > > On 8
On Tue, Aug 28, 2018 at 1:14 PM Marius Halden wrote:
> On Tue, Aug 28, 2018, at 21:34, Navdeep Parhar wrote:
> > On 8/28/18 12:30 PM, Marius Halden wrote:
> > > tx_frames does move, rx_frames is stuck at zero. The following
> counters are non-zero and does increase when traffic is sent through
be FreeBSD, but it may also be tied to Firefox.
Is anyone else seeing this? I'm not sure how common it is to run
log_in_vain, so it may be common, but little noticed.
Thanks for any clues about this.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP
given me an obvious and relevant example of why
"shutdown -r" should normally be used and "reboot" should not. I don't use
NFS, so it has not bitten me. I do recall dealing with similar issue MANY
years ago on Solaris systems working with Auspex file servers. Probably
dates to
ating. It is unchanged other than
fixing wording and formatting since 4.4-lite and probably that was largely
unchanged from AT V4. I probably should open a ticket.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C
load performance.
Are others seeing this? Any suggestions for troubleshooting? I don't see
much in the way of statistics or diagnostic information on iwn. the man
page gives me no clues.
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
d off the Ethernet
products.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
___
freebsd-net@freebsd.org mailing list
https://lists.freebsd.org/m
On Mon, Feb 5, 2018 at 9:38 PM, Victor Sudakov <v...@mpeks.tomsk.su> wrote:
> Eugene Grosbein wrote:
> > 06.02.2018 1:37, Kevin Oberman wrote:
> >
> > > My ancient Intel Centrino (iwn) card does 11n, HOSTAP and 5G. Or, at
> least
> > > it did
since FreeBSD 10. It has a really
bad time getting along with the wpa_supplicant in 11. It can take many
minutes to sync up on re-boot. It also goes "DOWN" very briefly a few times
a day, but it comes back up very quickly from these, so I may have a
hardware issue on my a
On Wed, Nov 1, 2017 at 2:46 PM, DES <3...@inx.su> wrote:
> Hello FreeBSD-Net,
>
> does anybody remember, around year 2004, there was a software application
> available (either as port, or package). Unfortunately I do not recall the
> application name and I'm not able to find it again, although
d script to run after /usr is mounted and before the
network starts? Of is there a better way?
Thanks!
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
__
;
To submit a patch, use svn to download the source from a repository. Be
sure the file in your source directory is the current, unmodified file.
Edit the file or files as needed to correct the bug
Generate the diff with the command "svn diff
path-to-directory-containing-file(s) > diff-file.diff"
U
5 09:41:13 rogue kernel: need promiscuous mode update callback
I don't see how this is even possible as I always thought syslog messages
were atomic. Guess not.
Again, this is not causing problems that I am aware of, but is a bit
disturbing.
--
Kevin Oberman, Part time kid herder and retired Networ
e, slight differences in hardware revisions can trigger
driver issues that don't break things on most variants. And, lest I knew,
RealTek did not provide documentation adequate to write a driver and this
makes drivers more likely to have subtle bugs.
--
Kevin Oberman, Part time kid herder and
On Wed, Aug 24, 2016 at 12:45 PM, Glen Barber < <kob6...@gmail.com>
g...@freebsd.org> wrote:
> On Wed, Aug 24, 2016 at 12:20:57PM -0700, Kevin Oberman wrote:
> > <kob6...@gmail.com>
> > On Wed, Aug 24, 2016 at 12:03 PM, Glen Barber <g...@freebsd.org> wrote:
right now.
On Aug 24, 2016 12:46 PM, "Glen Barber" <g...@freebsd.org> wrote:
> On Wed, Aug 24, 2016 at 12:20:57PM -0700, Kevin Oberman wrote:
> > <kob6...@gmail.com>
> > On Wed, Aug 24, 2016 at 12:03 PM, Glen Barber <g...@freebsd.org> wrote:
> >
>
On Tue, Aug 23, 2016 at 10:40 PM, Kevin Oberman < <kob6...@gmail.com>
kob6...@gmail.com> wrote:
> On Tue, Aug 23, 2016 at 11:48 AM, Adrian Chadd < <kob6...@gmail.com>
> adrian.ch...@gmail.com> wrote:
>
>> Hi,
>>
>> Compile in IWN_DEBUG and IEEE80
On Mon, Aug 22, 2016 at 12:21 PM, Vinícius Zavam < <kob6...@gmail.com>
egyp...@googlemail.com> wrote:
>
>
> 2016-08-20 23:07 GMT-03:00 Adrian Chadd <adrian.ch...@gmail.com>:
>
>> On 20 August 2016 at 19:02, Kevin Oberman <kob6...@gmail.com> wrote:
&
k, but sometimes it seems hopeless. It seems
worse when my phone is the hot spot than with my home router.
>
>
> On Aug 19, 2016 3:48 PM, "Kevin Oberman" <rkober...@gmail.com> wrote:
>>
>> Lately I have had serious issues with my system successfully associating.
>
tl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Aug 19 00:14:53 rogue wpa_supplicant[1634]: wlan0: CTRL-EVENT-SCAN-FAILED
ret=-1 retry=1
Is anyone else seeing this?
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PG
ervice dhclient restart wlan0" which assigned the address and that
resolved hte issue until I reboot.
Is this a known issue? Should I open a bug report? This would leave me in a
bad position should I ever need to reboot the system remotely or should it
crash when I am not near the system.
--
Kevi
ions at this point.
>
> Thank you!
> Chris
>
This sort of problem can be very tricky to diagnose. I'd like to suggest
that one of the tool you use should be SIFTR. It does kernel level
collection of network statistics and is a loadable module. By default it i
IPv4 only. It will have t
ault, but 0/0 is the normal representation.) Since
most systems have a default gateway defined, this may relate to the issue
you are seeing. I'm very unclear what happens with 0/0 if default is not
defined.
FWIW, here is what I see on this system (10.3-STABLE r299096):
Routing tables
Internet:
Destinati
On Fri, May 27, 2016 at 12:09 AM, Niklaas Baudet von Gersdorff <
nikl...@box-fra-01.niklaas.eu> wrote:
> Kevin Oberman [2016-05-26 21:11 -0700] :
>
> > The most valid use is when you can only get a /64 from your provider.
>
> I got a /112 for each of my virtual server
On Thu, May 26, 2016 at 12:36 PM, Niklaas Baudet von Gersdorff <
st...@niklaas.eu> wrote:
> I was eventually able to solve this issue. I asked for help on several
> mailing lists. So, for reference, here are links to the relevant
> threads:
>
>
at your network
is being snooped via a compromised system.
While I don't like the idea of hiding these messages at all and think
dealing with the issue through syslog.conf more appropriate, at least don't
let the setting be changed on a running system!
--
Kevin Oberman, Part time kid herder and r
ing the old "netmask" al
together.
ifconfig ue0 inet 192.168.2.176/24
Aside form no longer using a form of addressing that had been obsolete for
20 years, quotation marks won't matter.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Finger
.
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
On Tue, Jan 26, 2016 at 7:04 PM, Bruce Evans <b...@optusnet.com.au> wrote:
> On Wed, 27 Jan 2016, Gary Jennejohn wrote:
>
> On Tue, 26
eebsd-update calls for a reboot, this is when you need to replace
/boot/kernel/kernel with your custom kernel. If the kernel was not changed,
you won't be required to reboot, though I do recommend doing so to be sure
that no vulnerable code is left running.
--
Kevin Oberman, Part time kid herder and retired
Protocol#Redirect>
or Cisco
<http://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13714-43.html>
articles (or Google for many others).
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D0
any way inaccurate. However,
it is entirely possible to get misleading results if options not properly
selected.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
81 ms
>
>
> This router is theoretically useless as it is on the same network than the
> FreeBSD one.
>
> Do you have any idea about this issue? Did I make a mistake or is it a
> bug?
>
> Thanks,
> --
> Alarig Le Lay
>
Take a look at route(8). There are significan
ion that trigger the power saving
> > > modes in different ways
> >
> > I already have powerd_flags="-a max -b max -n max" in rc.conf, which I
> > hope should be enough.
>
>
> I suspect it might not touch the c states, but better check. The safes
rformance. The man page
describes it and how to run it quite clearly. For lots of tuning
recommendations for truly high performance, see FasterData
<http://fasterdata.es.net/>. Unfortunately, since my retirement five years
ago, I believe that all work has moved to Linux, so there may not be mu
performance on high latency links in the bast
of cases and, unfortunately, ssh/scp makes it not the best of cases.
--
Kevin Oberman, Goat herder and Retired Network Engineer
___
freebsd-net@freebsd.org mailing list
https://lists.freebsd.org/mailman
it a
production service in 2004, IIRC.
--
Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
___
freebsd-net@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo
. But without good
benchmarking, it's hard to tell.
I will say that for large volume data transfers (very large flows), a
single CPU solution does work best. But if Barney is going at this with his
usual attitude, it's probably not worth it to continue the discussion.
--
Kevin Oberman, Network
and a reasonable heads-up for problem status.
I suspect that once Sean has hit most of the old (some really old) tickets,
things will quiet down a fair bit. (But I could be wrong.) I love seeing
tickets being taken care of.
--
Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
PGP
put systems in a different /64
and spread them at random around that space if they are statically
addressed. (I don't recommend for or against statically addressing, though.)
--
Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
PGP Fingerprint
agree that this is debatable. I think
the word notion provides a clear indication of the intent. I know that
Windows XP-SP2 behaved this way. I have not looked at anything more recent
as that what we ran at work when I last was responsible for running a DHCP
server.
--
Kevin Oberman, Network
any options were positional, I did move -z gzip
before -G 500
This is on 10-Stable, so it may have been fixed, but I don't see any
relevant updates since 10.0.
--
Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
___
freebsd-net
. Especially since there may multiple addresses for a single name.
--
Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail
that in a while, but it was pretty
obvious.
wireshark can also do the capture directly, but I'll admit that after years
of using tcpdump (two of the authors used to sit down the hall from me), I
have never tried to use wireshark for packet capture.
--
Kevin Oberman, Network Engineer, Retired
E
On Fri, Jan 30, 2015 at 10:11 PM, David DeSimone ddesim...@verio.net
wrote:
Kevin Oberman wrote:
For ipfw you need something like allow ip from any to me frag. If you
want to restrict this to DNS, restrict it to dst-port 53.
Unfortunately, UDP fragments only contain the port number
?
- --
// Lev Serebryakov
Does the system have a firewall? If so, is it configured to allow
fragments?
For ipfw you need something like allow ip from any to me frag. If you
want to restrict this to DNS, restrict it to dst-port 53.
--
Kevin Oberman, Network Engineer, Retired
E-mail: rkober
simplified working with jails.
--
R. Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to freebsd-net-unsubscr
queries to each system to see if one
fails when other succeed. Use dig @servr-addr host.
--
R. Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
is the
precedence of :::0:0/96 which is an odd way of saying IPv4.
I generally recommend ipv6_activate_all.
Now I fear Peter will explain how I have misread the code.
--
R. Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
___
freebsd-net
with no
explicit configuration will auto-configure and run IPv6.
The system I am typing this on is entirely auto-configured as are almost
all Windows systems running 7 or 8. (Maybe Vista, too. Don't recall.)
--
R. Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
IPv6 running. Firewalls are a common issue.
What output do you get from ip6addrctl show? netstat -rnf inet6?
--
R. Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman
sshd with zombie process on FreeBSD 10.0-STABLE
- workaround.
--
R. Kevin Oberman, Network Engineer, Retired
E-mail: rkober...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send
not sure what to make of it.
You might try installing iperf3 and testing with that. iperf3 is a major
rewrite of iperf and is totally incompatible with the older version, so
you will need to install iperf3 on all systems
I doubt iperf is the issue, but this is a way to check.
--
R. Kevin Oberman
On Sun, Mar 9, 2014 at 11:44 AM, justin victoria j...@yeaguy.com wrote:
On 3/9/2014 10:40 AM, Kevin Oberman wrote:
You might try installing iperf3 and testing with that. iperf3 is a major
rewrite of iperf and is totally incompatible with the older version, so
you will need to install
are in ports and are best installed on a
workstation. The tcpdump output can be used as input to both. (tcpdump -pw
FILE -i INTERFACE host ADDRESS can do the job. Then copy the capture to
the right place for analysis. But start with configuration and counters for
the interface (netstat -i).
--
R. Kevin
-beta ( a week or two old) and it had similar problems..
only worse.. 9.2 actually sends multiple packets when is doesn't need to..
http://people.freebsd.org/~julian/fbsd9.png
Ack! (Sorry) I could have sworn that this had been fixed. Has it been
re-broken?
--
R. Kevin Oberman, Network
to Europe and Australia.
(Yes, careful tuning was required.)
--
R. Kevin Oberman, Network Engineer
E-mail: rkober...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail
quite a bit more than $320 per port. And that
is ignoring the cost of 100G routing, switching, and optical gear.
LAGG is not going away any time soon. I'm sure we will see Nx400G as soon
as 400G Ethernet is available.
--
R. Kevin Oberman, Network Engineer
E-mail: rkober...@gmail.com
this as he is one of
the authors. (The Bugs section is rather long and he might know that it
won't be useful in this case, but it has greatly helped me look at
performance issues.)
--
R. Kevin Oberman, Network Engineer
E-mail: rkober...@gmail.com
___
freebsd-net
specified, and options
-4 / -6 like telnet has. Same for traceroute / traceroute6. However,
this is an aside.)
Steinar Haug, Nethelp consulting, sth...@nethelp.no
Sorry to be so hackneyed, but...
+1
Sorry that I was unclear (and may have been last time, too).
--
R. Kevin Oberman, Network Engineer
, but I, too,
fear that it is a lost cause.
Please prove me wrong!
--
R. Kevin Oberman, Network Engineer
E-mail: rkober...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail
the data very
early after it is received by the kernel, but the kernel still must do this
as it and only actually can talk to the interface and receive data.
--
R. Kevin Oberman, Network Engineer
E-mail: rkober...@gmail.com
___
freebsd-net@freebsd.org
. There may be more
than two.
--
R. Kevin Oberman, Network Engineer
E-mail: rkober...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org
geom_eli module are not the same as were used to build the kernel you
are running.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe
are transmitted back to back with NO delay or awareness
of congestion. I can confirm that even this limited case can and does
sometimes result in packet loss when router queues are inadequate to
handle the load.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to freebsd-net-unsubscr...@freebsd.org
. It is a detailed guide
on moving data developed by the people who have to deal with the huge
volumes of Large Hadron Collider data moving across the Atlantic from
CERN to researchers in the US. (Note that this is not FreeBSD
specific.)
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
is Verizon who will be my provider next
month.)
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to freebsd-net
change with every relocation.
in any case, you might try moving the SID into the wpa_supplicant.conf
file, but my bet is it is N specific. Paging Adrian.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
___
freebsd-net@freebsd.org mailing
On Tue, Oct 9, 2012 at 6:23 AM, Denise H. G. darc...@gmail.com wrote:
On 2012/10/09 at 00:44, Kevin Oberman kob6...@gmail.com wrote:
On Mon, Oct 8, 2012 at 9:36 AM, Andreas Nilsson andrn...@gmail.com wrote:
On Mon, Oct 8, 2012 at 2:21 PM, Denise H. G. darc...@gmail.com wrote:
Hi list,
I
is trivial, but,
should this be the issue, please open a PR to have it added to the
source in SVN.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
not sure if new proposals are being
accepted), see:
http://www.es.net/RandD/advanced-networking-initiative/
On Thu, Jul 12, 2012 at 6:43 AM, Kevin Oberman kob6...@gmail.com wrote:
On Wed, Jul 11, 2012 at 1:31 PM, Sami Halabi sodyn...@gmail.com wrote:
Hi,
We have several boxes using 10G cards
is just a mite pricey, though it has dropped
tremendously over the past year and a half and I expect it will
continue to do so.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
___
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org
lines and modems.
I'll admit that I have mixed feelings about its practicality today,
though it does not hurt anything, as far as I can tell.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
___
freebsd-net@freebsd.org mailing list
http
On Fri, Jun 1, 2012 at 2:48 AM, Lawrence Stewart lstew...@freebsd.org wrote:
On 05/31/12 13:33, Kevin Oberman wrote:
[snip]
I used SIFTR at the suggestion of Lawrence Stewart who headed the
project to bring plugable congestion algorithms to FreeBSD and found
really odd congestion behavior
On Fri, May 25, 2012 at 6:27 AM, Andrew Gallatin galla...@cs.duke.edu wrote:
On 05/24/12 18:55, Kevin Oberman wrote:
This is,of course, on a 10G interface. On 7.3 there is little
Hi Kevin,
What you're seeing looks almost like a checksum is bad, or
there is some other packet damage. Do
On Fri, May 25, 2012 at 6:27 AM, Andrew Gallatin galla...@cs.duke.edu wrote:
On 05/24/12 18:55, Kevin Oberman wrote:
This is,of course, on a 10G interface. On 7.3 there is little
Hi Kevin,
What you're seeing looks almost like a checksum is bad, or
there is some other packet damage. Do
=4.1942 Mbps
0.5000 MB / 1.00 sec =4.1942 Mbps
This is,of course, on a 10G interface. On 7.3 there is little
difference between the two. We are using cubic CC on the 8.2 system.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
On Thu, May 24, 2012 at 4:43 PM, Bjoern A. Zeeb
bzeeb-li...@lists.zabbadoz.net wrote:
On 24. May 2012, at 22:55 , Kevin Oberman wrote:
When we set the ToS bits for less than best effort (also called
scavenger) on packets (ToS=32), performance on FreeBSD 8.2 is
terrible. It was as good as best
.
This assumes that it actually works as advertized, but the authors are
unlikely to have published this without thorough analysis and testing.
They are, after all, among the leading TCP experts in the world.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
to use stateful TCP filtering, it is probably best to do it
in the manner shown in the ipfw(8) man page under DYNAMIC RULES. This
is very different from the way you did it.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
___
freebsd-net
to trivial DOS (often of yourself) by
filling the dynamic rule tables.
Generally, for client systems, stateful UDP makes sense, but I
generally don't understand why people choose the more complex, slower,
and potentially disruptive stateful rules for TCP.
--
R. Kevin Oberman, Network Engineer
E-mail
On Tue, Apr 17, 2012 at 12:58 PM, Michael Sierchio ku...@tenebras.com wrote:
On Tue, Apr 17, 2012 at 12:48 PM, Kevin Oberman kob6...@gmail.com wrote:
But I do have to ask why you find statefull rules for outgoing TCP
connections desirable? Why not:
00101 allow tcp from me to any established
...@berentweb.com wrote:
On Tue, Apr 3, 2012 at 7:46 PM, Kevin Oberman kob6...@gmail.com wrote:
On Tue, Apr 3, 2012 at 4:51 AM, Beeblebrox zap...@berentweb.com wrote:
Slightly different point of view: Under this scenario of dikless clients
having dual NICs would CRAP be a choice to consider? From what I
On Sat, Mar 24, 2012 at 6:30 AM, nyoman.b...@gmail.com
nyoman.b...@gmail.com wrote:
On Thu, Mar 15, 2012 at 11:47 AM, Kevin Oberman kob6...@gmail.com wrote:
Please don't top post. It makes following the thread very difficult.
(Yes, I know too many MUAs make this difficult.)
On Wed, Mar 14
can't do:
ifconfig_em0=DHCP
ifconfig_em0=mediaopt half-duplex
That will not do DHCP, so hte interface will not come up. Of course,
you can concatinate a second entry to the first using normal sh
syntax.
--
R. Kevin Oberman, Network Engineer
E-mail: kob6...@gmail.com
1 - 100 of 184 matches
Mail list logo