Hi Santi,
yes that was one of the first things i tried, disabling all the VLAN_HW*
options on the interface, unfortunately without any change in the behavior.
The pf module is loaded and some filters are active on another interface
but no filtering happens on ixl3, ixl3.15 or bridge0. That
Hi Daniel, have you try disabling hardware vlan filtering?Also I guess there is not ipfw or pf modules loaded right?Best SantiOn 25 Jan 2024, at 10:07, Daniel wrote:
Hi,
thanks for your suggestion. Turns out, when i unplug the vlan
interface from the bridge and put
Hi,
thanks for your suggestion. Turns out, when i unplug the vlan interface
from the bridge and put the ip address on the vlan interface, as you
suggested, things start to work, e.g. arp resolves.
as soon as i put the ip and the vlan interface back on the bridge,
things stop again. so where
> On Jan 23, 2024, at 11:03 PM, Daniel wrote:
>
> Hi List,
>
>
> just recently I discovered a problem with the ixl(4) driver. Hopefully
> someone here can help me. my setup is as follows:
>
>
> Network - ixl3 interface - ixl3.15 vlan interface - bridge0 -
> vnet0.1 to
Hi List,
because i've been asked, yes, the ixl3.15 interface is also UP (even my
output in the last mail showed different, result of my desperate tries
to make it work.
One thing I didn't mention, this is an onboard ixl on a Intel S2600STB
Board, is has this wired config, were the first
