Currently using 250gb drives here without any difficulties.
Good Luck
LK
On Sat, 4 Oct 2003 00:37:41 -0500
kitsune [EMAIL PROTECTED] granted us these pearls of wisdom:
On Fri, 3 Oct 2003 22:46:42 +0900
topaz [EMAIL PROTECTED] wrote:
Dear Sirs
I have been using FreeBSD4.5 as a File
I've successfully installed and converted a FreeBSD 4.8 install into a
bootable Vinum volume many times; however mirroring that volume onto a
second identical drive is proving difficult. Per Greg Lehey's
instructions in chapter 12 of The Complete FreeBSD 4th Edition, I've
setup a bootable
Sean Page wrote:
Granted it's not an inexpensive solution, but we switched from SpamAssassin
to PureMessage by ActiveState.
http://www.activestate.com/Products/PureMessage
We are thoroughly impressed with the accuracy and the dynamic feature set of
the product. Automatic updates come down at
[Format recovered--see http://www.lemis.com/email/email-format.html]
Computer output unwrapped.
On Saturday, 4 October 2003 at 0:17:44 -0700, aarong wrote:
I've successfully installed and converted a FreeBSD 4.8 install into a
bootable Vinum volume many times; however mirroring that volume
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I'm trying to figure out how to convert .doc files into a unix file so I
can read it with say emacs, vi and etc.? Thanks
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.3 (FreeBSD)
iD8DBQE/foY1OlwzeMhXmLgRAhzFAKCwhGVoDhuJEWQ5vDCdaJ4l+M3rRwCfROS2
On Sat, Oct 04, 2003 at 03:35:01AM -0500, Bryan Cassidy wrote:
I'm trying to figure out how to convert .doc files into a unix file so I
can read it with say emacs, vi and etc.? Thanks
By 'unix file' I assume you mean a text file.
Try /usr/ports/textproc/antiword.
mike
--
I'm a Unix newbie who just installed BSD 5.1. I made it through the
installation without too much of a hassel and I went ahead and added XFree86
in the installation, along with the BSD Boot Manager since I'm dual booting
with Windows. I have a 40 gig HD for Windows then I have 2 separate 120
On Fri, Oct 03, 2003 at 12:46:12PM -0800, Noah wrote:
FreeBSD 4.8-STABLE machine
okay I just built sendmail-sasl version 8.12.10 from
/usr/ports/mail/sendmail-sasl but my system is complaining that SASL support
is required. what am I doing wrong. why isnt SASL support being recognized?
Hello,
How can I find out which packages and/or ports are included in
4.9-RC1-i386-disc1.iso (or otherVersion-disc1.iso) without downloading
and burning on CD that ISO image?
The 2.13.1st Paragraph of the Handbook says that version-disc1.iso
contains ``everything you need to install FreeBSD, and
I'm trying to figure out how to convert .doc files into a unix file so I
can read it with say emacs, vi and etc.? Thanks
By 'unix file' I assume you mean a text file.
Try /usr/ports/textproc/antiword.
Yep, that works great. I have this line here
application/msword; antiword %s;
hi all,
i like to try out FreeBSD for various reasons
i've got a few questions;
are there HP Printer drivers available and
also Artec scanner drivers?
is there a freeware C/C++ compiler available
and (less importantly) a freeware
text editor or C/C++ project IDE ??
will it work on on a
Hi !
Ok, I'm at a point where I'm ready to cry :(
Is there ANY easy way to partition/slice a hardrive for FreeBSD ?
I spent all morning playing with bsdlabel, sysinstall... I just want to
partition a second hardrive so I could dump/restore the content of my first
drive.
So, I tried
Hello,
I'm having a problem. Whenever I run pkg_info with
whatever switches, I receive this at the top of the read
out, any ideas?
pkg_info: show_file: can't open '+COMMENT' for reading
___
[EMAIL PROTECTED] mailing list
+[ Mailing Lists Catcher [EMAIL PROTECTED] (03.Oct.2003 19:53):
|
| I don't know if this applies now but before I ran my own mail server I
| used to see that sort of thing after I su'd so another account. For
| instance if I logged in as user but su'd to a root it would tell me I
| had mail
On Fri, Oct 03, 2003 at 08:22:56PM -0700, Kris Kennaway wrote:
On Fri, Oct 03, 2003 at 10:46:06PM -0400, Guy Middleton wrote:
On a 5.1-RELEASE system, I attach a umass device, and it appears in /dev like
this:
$ ls -l /dev/da3
crw-r- 1 root operator4, 28 Sep 19 23:29
On 10/02/2003 10:50 AM [EMAIL PROTECTED] (Marc Ramirez) wrote:
1) Make sure it's not in browser/squid cache.
2) In your httpd.conf, you'll probably need to add index.php3 to your
DirectoryIndex directive, if you haven't already.
DirectoryIndex index.html index.html.var index.php index.php3
I
I have a question (this might need to go to -hackers, but I thought I would
try here)..
I'm playing with the MD_ROOT_SIZE option a FreeBSD 5.0 config file. When I
set the size to anything over 7000, I get a nice little isa_dmainit(2, 1024)
failed message at startup (which results in a kernel
David Witt wrote:
I'm a Unix newbie who just installed BSD 5.1. I made it through the
installation without too much of a hassel and I went ahead and added
XFree86 in the installation, along with the BSD Boot Manager since I'm
dual booting with Windows. I have a 40 gig HD for Windows then I
William Labbett wrote:
hi all,
i like to try out FreeBSD for various reasons
i've got a few questions;
are there HP Printer drivers available and
also Artec scanner drivers?
Check the hardware compatability list
at www.freebsd.org/handbook ... also
the section on printing. I imagine that
Usually, windows will show up in the BSD boot manager as ???, so the
boot prompt on my system (Win2K and FreeBSD 5.1) is the following:
F1 ???
F2 FreeBSD
When I've installed FreeBSD on a physically separate drive, it usually
creates two boot menus similar to the following:
F1 ???
F2 Disk 1
On Sat, Oct 04, 2003 at 09:00:55AM -0400, [EMAIL PROTECTED] wrote:
Hello,
I'm having a problem. Whenever I run pkg_info with
whatever switches, I receive this at the top of the read
out, any ideas?
pkg_info: show_file: can't open '+COMMENT' for reading
Somewhere under /var/db/pkg you
Is there a way to take my mail (from KMail) and either export it to, or some
other app that will allow me to pull in all the mail into Outlook2000?
Best regards,
Chris
__
PGP Fingerprint = D976 2575 D0B4 E4B0
On Sat, 2003-10-04 at 19:41, William Labbett wrote:
are there HP Printer drivers available and
Yes. Supported by HP also through hpijs. For more information on how
well yours is supported see: http://www.linuxprinting.org
also Artec scanner drivers?
Maybe.. through Sane. Check your model.
- Original Message -
From: twig les [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, October 03, 2003 1:06 PM
Subject: Where to find pam_unix documentation?
Hey *, I'm trying to do something fairly simple. On a 4.6
Release box I would like to force all users to choose passwords
- Original Message -
From: William Labbett [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, October 04, 2003 4:41 AM
Subject: Interested but am i compatible?
hi all,
i like to try out FreeBSD for various reasons
i've got a few questions;
are there HP Printer drivers
Ross, Chris [EMAIL PROTECTED] writes:
I am having a problem booting the FreeBSD 5.1 install CD. My
machine hangs when it goes to pole agp. Is there a way to disable agp
when booting from this CD?
I don't think so. On my laptop, I can't directly install *any* recent
releases, since
Hmmm... Sounds like you're trying to start up the sendmail from the
base system but using the .mc/.cf files with all of the SASL stuff in
it.
Check the contents of /etc/mail/mailer.conf -- make sure you're
starting up the port version of sendmail, which will be
/usr/local/sbin/sendmail
On Saturday 04 October 2003 09:36 am, Chris wrote:
Is there a way to take my mail (from KMail) and either export it to, or
some other app that will allow me to pull in all the mail into Outlook2000?
Best regards,
Chris
KMail allows you to create mailbox folders in maildir or
On Sat, Oct 04, 2003 at 07:13:28AM -0800, Noah wrote:
Either that, or ditch the ports version of sendmail, and add the
following to your /etc/make.conf:
SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
SENDMAIL_LDFLAGS=-L/usr/local/lib
SENDMAIL_LDADD=-lsasl2
when I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I'm sure you're all getting sick of my being so vocal, but here goes anyway.
I was messing around as root in KDE and found the KUser application. I tried
adding a user (my girlfriend), and when done, nobody could log in. I managed
to boot
Am Sat, 04 Oct 2003 12:41:20 +0100 schrieb William Labbett:
hi all,
i like to try out FreeBSD for various reasons
i've got a few questions;
are there HP Printer drivers available and also Artec scanner drivers?
what printer? What scanner?
www.linuxprinting.org (also goes for
Gave that a shot, but still seeing the same problem
any other tips?
On Sat, 4 Oct 2003 15:36:37 +0100
Matthew Seaman [EMAIL PROTECTED] wrote:
On Sat, Oct 04, 2003 at 09:00:55AM -0400,
[EMAIL PROTECTED] wrote:
Hello,
I'm having a problem. Whenever I run pkg_info with
whatever
Hi,
I would like to ask for some advice on configuring my home network,
with a FreeBSD 5.1 being the main player. In a nutshell, I want to route
wired and wireless traffic through my FBSD box, do some ipfw, perhaps
IPSec, and some bandwidth shaping, and finally send the traffic out to
the
On Sat, 4 Oct 2003, Fernan Aguero wrote:
+[ Mailing Lists Catcher [EMAIL PROTECTED] (03.Oct.2003 19:53):
|
| I don't know if this applies now but before I ran my own mail server I
| used to see that sort of thing after I su'd so another account. For
| instance if I logged in as user but
[EMAIL PROTECTED] wrote:
Gave that a shot, but still seeing the same problem
any other tips?
On Sat, 4 Oct 2003 15:36:37 +0100
Matthew Seaman [EMAIL PROTECTED] wrote:
On Sat, Oct 04, 2003 at 09:00:55AM -0400,
[EMAIL PROTECTED] wrote:
Hello,
I'm having a problem. Whenever I run pkg_info with
On Sat, 4 Oct 2003, Eric F Crist wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I'm sure you're all getting sick of my being so vocal, but here goes anyway.
I was messing around as root in KDE and found the KUser application. I tried
adding a user (my girlfriend), and when
On Sat, Oct 04, 2003 at 12:00:55PM -0400, [EMAIL PROTECTED] wrote:
Gave that a shot, but still seeing the same problem
any other tips?
Perhaps the problem is that one or more of the pkg's doesn't have a
+COMMENT file at all. Try this:
# cd /var/db/pkg
# find . -type d -mindepth 1
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 04 October 2003 11:27 am, Mikko Työläjärvi wrote:
On Sat, 4 Oct 2003, Eric F Crist wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I'm sure you're all getting sick of my being so vocal, but here goes
anyway.
Aragon Gouveia wrote:
Hi,
I've compiled a port as normal (apache13 in this case). I'd like to run
'make install' now and tell it to install the package to the base of the
root filesystem of a jail from the jail's host. Possibly also to skip
registering it in the host's package database.
Does
I am running FreeBSD-Current. I decided to try openoffice 1.1. I downloaded
the package and it has installed ok. I asked on the openoffice list and got
the user setup command ( openoffice-1.1 ) but when I issue the command as
a user from the command line, I get the following response:
ELF
--On Wednesday, October 01, 2003 15:12:42 +0200 Felix 'buebo' Kakrow
[EMAIL PROTECTED] wrote:
I've compiled a port as normal (apache13 in this case). I'd like to run
'make install' now and tell it to install the package to the base of the
root filesystem of a jail from the jail's host.
On Saturday, October 4, 2003, at 01:30 AM, Greg 'groggy' Lehey wrote:
[Format recovered--see http://www.lemis.com/email/email-format.html]
Computer output unwrapped.
Having seen that message in many of your replies on the lists, I went
out of my way to make sure Mail.app (the OS X mailer)
+-- Abhijeet [freebsd] [03-10-03 19:42 IST]:
| hi all,
| i want to make a duplicate copy of a server hard disk so that i get a
| reserver hdd with all settings if my present hdd fails. please tell me a
| way so that i can do this job very fast. i won't linke to make
| reinstall . please help
I was getting errors finding files in site-ruby when attempting to run
Portupgrade, so I figured my Portupgrade installation might be messed
up. I did make deinstall for Portupgrade and pkg_deleted portupgrade*
and ruby* (I haven't used ruby for anything else yet). I even did
make clean in a
cd /usr/src/sys/i386/conf
(editor cmd here) (kernel conf)
config (kernel conf)
cd /usr/src
make buildkernel KERNCONF=(kernel conf)
make installkernel KERNCONF=(kernel conf)
Also, read /usr/src/UPDATING
and check out the hand book too.
Vladimir wrote:
Hello, freebsd-questions.
I use FreeBSD 5.1
Yea,
pkgdb worked like a charm. i had been using the -fu option
in a more conservative manner, but now it looks like it's
all set. Thanks alot
On Sat, 4 Oct 2003 17:40:24 +0100
Matthew Seaman [EMAIL PROTECTED] wrote:
On Sat, Oct 04, 2003 at 12:00:55PM -0400,
[EMAIL PROTECTED] wrote:
Gave
Bogdan Hojda [EMAIL PROTECTED] writes:
How can I find out which packages and/or ports are included in
4.9-RC1-i386-disc1.iso (or otherVersion-disc1.iso) without downloading
and burning on CD that ISO image?
The 2.13.1st Paragraph of the Handbook says that version-disc1.iso
contains
soneill [EMAIL PROTECTED] writes:
I've recently installed FreeBSD 5.1 on my Athlon-based machine, and most
everything seems to be working ok. However, I have a problem trying to run
any s/w that uses the Tcl library libtcl8.3.so.1. Whenver I run such a
program, including wish8.3, tkdesk,
Noah [EMAIL PROTECTED] writes:
okay I jsut installed sendmail-8.12.10 from /usr/ports the other day. and I
try to start version 8.12.10 but 8.12.9 still gets executed. this is really
strange?
Did you adjust mailer.conf(5)?
___
[EMAIL PROTECTED]
Hello All,
I'm trying to set up printing on my FreeBSD 5.1-Release using LPRng
but having problems. Hoping someone can help out here.
When I do a
$ checkpc -f, I get:
Warning - lp: cannot open lp device '/dev/lpt0' - Permission denied
The lpd is being run by user 'daemon' while ls -l /dev/lpt0
Okay, I have the abovementioned camera, which the Digikam port supports
through libgphoto2(that very camera is mentioned). When I plug the cam in,
turn it on, and set it to Playback mode, I get a kernel message acknowledging
its presence, complete with model info, on ugen2.
However, no matter
In the last episode (Oct 04), aarong said:
On Saturday, October 4, 2003, at 01:30 AM, Greg 'groggy' Lehey wrote:
[Format recovered--see http://www.lemis.com/email/email-format.html]
Computer output unwrapped.
Having seen that message in many of your replies on the lists, I went
out of my
On Sat, Oct 04, 2003 at 11:36:46AM +0100, Bogdan Hojda wrote:
Hello,
How can I find out which packages and/or ports are included in
4.9-RC1-i386-disc1.iso (or otherVersion-disc1.iso) without downloading
and burning on CD that ISO image?
The 2.13.1st Paragraph of the Handbook says that
On Sat, Oct 04, 2003 at 01:05:33AM +0200, Gabriel Striewe wrote:
On my Athlon 2000XP+ under FreeBSD 5.1 I have installed a Trust Soundcard 511 5.1
Sound Expert Digital. I compiled a new kernel with device pcm. After typing grep
pcm /var/run/dmesg.boot I get:
pcm0: CMedia CMI8738 port
On Fri, Oct 03, 2003 at 09:26:44PM -0500, Bingrui Foo wrote:
Hi all,
I read the FreeBSD handbook and installed new kernel with 'device pcm'.
Also used 'cd /dev; sh MAKEDEV snd0'.
dmesg | grep pcm returns:
pcm0: CMedia CMI8738 port 0xa400-0xa4ff irq 10 at device 5.0 on pci0
pcm1: Creative
Sysintsall should work fine .. cand you send the output of 'fdisk /dev/ad2' and
'bsdlabel /dev/ad2'.
On Sat, Oct 04, 2003 at 02:27:56PM +0200, Antoine Jacoutot wrote:
Hi !
Ok, I'm at a point where I'm ready to cry :(
Is there ANY easy way to partition/slice a hardrive for FreeBSD ?
I
You want to use the NAT of your ASDL router or that pc1 do the nat for xl0
and wi0 ?
If you want that pc1 do the NAT, you don't have to bridge xl0 and xl1, you only
have to bridge wi0 and xl1 and do nat betwen them and xl1.
On Sat, Oct 04, 2003 at 07:06:31PM +0300, Mike Jackson wrote:
Hi,
I
Question for you guru's;
I've been trying to install a PAM module on my FreeBSD 5.1 system.
Unfortunately, someone thought they were bright and included OpenPAM,
which would be fine and dandy except for it is installed by default as
static. This means I PAM is now AM, because nothing is
| By Pat Lashley [EMAIL PROTECTED]
| [ 2003-10-04 19:31 +0200 ]
Another option is to build and package the port(s) outside the jail.
Then nullfs mount /usr/ports in the jail directory and install
the port(s) from the package(s).
The downside of this
On Sat, Oct 04, 2003 at 02:12:53PM -0600, Joe Lewis wrote:
Question for you guru's;
I've been trying to install a PAM module on my FreeBSD 5.1 system.
Unfortunately, someone thought they were bright and included OpenPAM,
which would be fine and dandy except for it is installed by default
On 4 Oct 2003, Lowell Gilbert wrote:
soneill [EMAIL PROTECTED] writes:
I've recently installed FreeBSD 5.1 on my Athlon-based machine, and most
everything seems to be working ok. However, I have a problem trying to run
any s/w that uses the Tcl library libtcl8.3.so.1. Whenver I run such
On Sat, 04 Oct 2003 04:27:29 -0500, David Witt [EMAIL PROTECTED]
wrote:
I'm a Unix newbie who just installed BSD 5.1. I made it through the
installation without too much of a hassel and I went ahead and added
XFree86 in the installation, along with the BSD Boot Manager since I'm
dual
Hi !
Ok, I'm at a point where I'm ready to cry :(
Is there ANY easy way to partition/slice a hardrive for FreeBSD ?
I spent all morning playing with bsdlabel, sysinstall... I just want to
partition a second hardrive so I could dump/restore the content of my first
drive.
So, I
Hi !
Ok, I'm at a point where I'm ready to cry :(
Is there ANY easy way to partition/slice a hardrive for FreeBSD ?
I spent all morning playing with bsdlabel, sysinstall... I just want to
partition a second hardrive so I could dump/restore the content of my first
drive.
In the last episode (Oct 04), Joe Lewis said:
I've been trying to install a PAM module on my FreeBSD 5.1 system.
Unfortunately, someone thought they were bright and included OpenPAM,
which would be fine and dandy except for it is installed by default
as static. This means I PAM is now AM,
On Saturday, 4 October 2003 at 0:14:03 -0400, Keith Baumgart wrote:
Ok, I'm not totally a newbie but, I'm definitely no expert in FBSD. When I
was doing my original install, it was on a p100 w/ 32 megs of ram, so I gave
myself a 1 gig swap partition to help alleviate some of the server load.
ext Manuel Rabade (MiG) ([EMAIL PROTECTED]) wrote:
You want to use the NAT of your ASDL router or that pc1 do the nat for xl0
and wi0 ?
I'm using the NAT on the ADSL router, because that's the only public IP
that I have.
--
mike
___
[EMAIL
On Saturday, 4 October 2003 at 10:36:15 -0700, aarong wrote:
On Saturday, October 4, 2003, at 01:30 AM, Greg 'groggy' Lehey wrote:
[Format recovered--see http://www.lemis.com/email/email-format.html]
Computer output unwrapped.
Having seen that message in many of your replies on the
On Sat, 4 Oct 2003, Joe Lewis wrote:
Question for you guru's;
I've been trying to install a PAM module on my FreeBSD 5.1 system.
Unfortunately, someone thought they were bright and included OpenPAM,
which would be fine and dandy except for it is installed by default as
static. This means I
Greg 'groggy' Lehey wrote:
The format=flowed is benign. It just tells the receiving MUA to wrap
text where appropriate. The text line lengths are already correct.
The problem is that computer output *shouldn't* be wrapped, and that's
what your MUA is doing.
Hi,
I have about 100 mboxes that I need to convert in to maildirs.
I REALLY want the timestamp of the files in the maildir to match the
timestamps inside the emails.
Does anyone have a suggestion?
--
Micheas Herman [EMAIL PROTECTED]
___
[EMAIL
On Thu, 2003-10-02 at 11:06, Mike Maltese wrote:
It's in
/usr/ports/net/samba-devel/
Yes, but the port hasn't been updated to the release version. You'll have to
modify the Makefile to fetch the current release. I've done it and it does
build, however I haven't installed it.
Here are my
Hello!
Can anybody recommend a low-scale presentation programm in OpenOfficeImpress or
PowerPoint style, but which does not use as much resources.
Thanks for any hints
Gabriel
___
[EMAIL PROTECTED] mailing list
On Sat, 2003-10-04 at 17:13, Gary wrote:
Hello Micheas,
On Saturday, October 4, 2003, 12:54:13 AM, you hammered out:
M I have about 100 mboxes that I need to convert in to maildirs.
M I REALLY want the timestamp of the files in the maildir to match the
M timestamps inside the emails.
M
On Sun, 5 Oct 2003, Gabriel Striewe wrote:
Hello!
Can anybody recommend a low-scale presentation programm in
OpenOfficeImpress or PowerPoint style, but which does not use as much
resources.
How about saving it as HTML then using netscape?
Rus
--
w: http://www.jvps.com | Virtual Dedicated
Hello Micheas,
On Saturday, October 4, 2003, 12:54:13 AM, you hammered out:
M I have about 100 mboxes that I need to convert in to maildirs.
M I REALLY want the timestamp of the files in the maildir to match the
M timestamps inside the emails.
M Does anyone have a suggestion?
There are several
On Sat, Oct 04, 2003, Mikko Työläjärvi wrote:
...
Having had some experience writing pam modules on a number of
platforms, I whipped out my suite of pam test modules to have a look
at this incredbible breakage you speak of. I mean, there is a
specification for pam after all.
Could you suggest
How to I allow users access to their own timezone without affecting the
system processes?
All of my systems regardless of location have always been set to UTC so
logs and cron are in sync across timezones.
Recently I have had need to allow users to set their own timezone in the
.cshrc using:
Replying to myself,
I copied samba-devel to samba-3. Made my chanes. Did a make no
problems. Did a make install. It seems to be working.
Micheas
On Thu, 2003-10-02 at 13:18, Micheas Herman wrote:
On Thu, 2003-10-02 at 11:06, Mike Maltese wrote:
It's in
/usr/ports/net/samba-devel/
If you don't mind me budding in to this threadI am trying out a new
email client for Gnome and am not certain how the messages are going to
look.
It was the only Gnome port I could find that had SMTP Auth so I decided
to use it since my email server now requires I send a password to send
On Saturday 04 October 2003 08:23 pm, Rus Foster wrote:
How about saving it as HTML then using netscape?
I think he wanted something that /wasn't/ a resource hog :-)
Seriously, if you have KDE installed (which you probably don't if you
are worried about system resources) there is KPresenter.
On Sun, Oct 05, 2003 at 02:12:49AM +0300, Mike Jackson wrote:
ext Manuel Rabade (MiG) ([EMAIL PROTECTED]) wrote:
You want to use the NAT of your ASDL router or that pc1 do the nat for xl0
and wi0 ?
I'm using the NAT on the ADSL router, because that's the only public IP
that I have.
Humm
only my $ 0,02 about on SpamAssassin usage
try catching SpamAssassin directly from command line of perl doing this:
perl -MCAPN -e'install MAil::SpamAssassin'
this will download Spamassassin and the dependencys , compile test and install.
Is just and advice, about how take better performance of
When in a conversation window, clicking on the Font Face button
causes gaim-0.70 to spew the following to stderr:
** (gaim:199): WARNING **: Couldn't load font fixed Medium Semi-Condensed
0 falling back to Sans Medium Semi-Condensed 0
** (gaim:199): WARNING **: Couldn't load font Sans Medium
On Sat, 2003-10-04 at 23:47, Steve Bernacki wrote:
When in a conversation window, clicking on the Font Face button
causes gaim-0.70 to spew the following to stderr:
** (gaim:199): WARNING **: Couldn't load font fixed Medium Semi-Condensed
0 falling back to Sans Medium Semi-Condensed 0
**
On Saturday, 4 October 2003 at 10:36:15 -0700, aarong wrote:
On Saturday, October 4, 2003, at 01:30 AM, Greg 'groggy' Lehey wrote:
I'd like to see the complaints. This is why I ask for the information
in the man page or at http://www.vinumvm.org/vinum/how-to-debug.html.
This is when
86 matches
Mail list logo
