I appologize in advance for having to ask this question. I have skimmed
through the manual, and have missed the answer.
I use BSD on a disk which is 50-50 win 98 and 5.2. I use, on the same
computer win ME and RH linux 8.0. I can access the dos partitions with
no problem using mount_msdosfs,
On Tuesday 27 July 2004 08:23, John Widenoja wrote:
Your linux fs must be ext2 or ext3
Compile in the kernel the
option EXT2FS
command line after reboot
mount_ext2 /dev/adxxx /mnt with eventually the -o ro option gentoo for
example).
Kind regards.
Jens
I appologize in advance for
Hello all,
i recently updated my laptop by using cvsup to download the latest 5.2.1 + patches
source, and the did all the steps to make world. it works fine, but is there another
way which takes less time, to update my laptop? what i would really like is a way to
cvsup the security patches, and
Hi Everyone,
I recently switched from FreeBSD 5.2.1 to 4.10 in the hope that it would
solve my seemingly unsolvable Nvidia driver freeze issue. Alas, it did not.
However, now that I am running FreeBSD 4.10 (and intend to stay with it) I
am having an error when I insert my Prolific TDX MemoDisk
Hello
Sorry for my ignorance, am new to FreeBSD... which is the kernel config file?
is it a configuration for compiling or at boot time? am linux user so will
not bee too hard, just tell me which is the file pls :D
Regards,
Miguel
This should be automatically created by devfs. I would make
On Tuesday 27 July 2004 01:09 am, Sikander Abbasi wrote:
Dear sir,
thanking you for your reply
I am using freebsd 5.2 cdrom installing,it give
errorwhen it start installing file system, error, max
one fat partition allow.
with regards
Sikander Abbasi
Are you having FreeBSD install a fat
On Tue, Jul 27, 2004 at 11:14:38AM +1200, Jonathan Chen wrote:
On Mon, Jul 26, 2004 at 07:20:24AM -0400, Paul R Culmo wrote:
Greetings,
[...]
I've searched high and low and found some really good docs, on how to do
it to get it working. Yes I've compiled and installed the port, that's
On Tue, 27 Jul 2004 02:57:38 -0500
Miguel Cardenas [EMAIL PROTECTED] wrote:
Hello
Sorry for my ignorance, am new to FreeBSD... which is the kernel config
file? is it a configuration for compiling or at boot time? am linux user
so will not bee too hard, just tell me which is the file pls :D
On Wed, Jun 02, 2004 at 04:32:36PM -0500, Mike Oliveri wrote:
I'm running FreeBSD 4.9 and we had a brief problem with SquirrelMail this afternoon.
Upon restarting Apache (1.3), it could not find one of the libso files, so we
upgraded both Apache (to 1.3.31 from ports) and PHP (to 4.3.6_1 from
Anthony Philipp wrote:
[ please wrap your lines at 72 - 76 characters. Thanks ]
if patching by source doesnt work this way is there a way to
use binary patches?
Yes, have a look at ports/security/freebsd-update
I don't know, though, whether it works after you have used the source
method to
Peter wrote:
use ports install bandwidthd For FreeBSD 4.10
can't use bandwidthd (FreeBSD 4.10)?
you can try it ^^
##
about this error ?G
Syntax Error parse error on line 40
Syntax Error parse error on line 40
Syntax Error parse error on line
my bsd box is : freebsd 5.2 current i386
here my detail insatll when i try install from ports
# /usr/ports/database/db42/
#make
--cut--
checking for strip... strip
checking for strip... /usr/bin/strip
checking for a BSD-compatible install... /usr/bin/install -c -o root
-g wheel
Hi i am from Bulgaria and i have some question i have a one wireless PCI card Linksys
WMP11 -EU v.4 how can i make this card to work i try whit 4.10 and 5.2 but they
kannot see the card please help me if you cann i do'not know hawto install him when i
write ifconfig -l i kannot see this
Hi,
i like to compile mod_php5 port with the java/ext support, can someone help
me ?
thanx thomas
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi there Guys,
I'm using a setup of Exim, procmail and Cyrus2 together.
Now, exim recevies the mail, passes it to procmail via some kind of pipe and procmail
uses cyrdeliver to put mails into the corredsponding cyrus imap mail folders ...
now is there a way to put sieve between procmail and
Hi all,
I'm reading the function ia64_init()sys/ia64/ia64/machdep.c, and try
to use printf to output some information. But if I put printf before
msgbufinit(), I won't see any word I expect by using dmesg.
In the same function after cninit(), it comments:
/*
* Initialize the console
Attention: [EMAIL PROTECTED]
A Illegal attachment type was found in an Email message you sent.
This Email scanner intercepted it and stopped the entire message
reaching it's destination.
The Illegal attachment type was reported to be:
Não e permitido o envio de ficheiros PIF
The original message was received at Tue Jul 27 08:23:33 EDT 2004
- The following addresses had permanent fatal errors -
[EMAIL PROTECTED]
(reason: 550 5.1.1 [EMAIL PROTECTED]... User unknown)
- Transcript of session follows -
.. while talking to mailhost.cotse.com.:
I am new to FreeBSD and am using it as linux has a problem with my setup
that I was unable to resolve. Anyways, I am liking what I have read
about FreeBSD.
I am a bit of a control freak and did a custom install of FreeBSD 4.10
over the net with the required package and all the support docs.
*This message was transferred with a trial version of CommuniGate(tm) Pro*
When I get my nightly email from the security run output it normally has about the
last 20 lines or less from the /var/log/messages. Is there a way to increase that to
about the last 50 lines?
Thanks,
Chris
On Tuesday 27 July 2004 05:45 am, Duggan wrote:
I am new to FreeBSD and am using it as linux has a problem with my
setup that I was unable to resolve. Anyways, I am liking what I have
read about FreeBSD.
I am a bit of a control freak and did a custom install of FreeBSD
4.10 over the net
Karol Kwiatkowski wrote:
Joseph Peterson wrote:
Unfortunately that is not the solution to my problem, I've run
memtest86 on my laptop several times and found no problems... any
other thoughts? =)
-joe
Just a thought:
Have you build your world and / or kernel from source? If that's the
case double
I will be out of the office starting 24.07.2004 and will not return until
19.08.2004.
In case of urgent matters please contact Uwe Muehlhausen/Germany/IBM
___
[EMAIL PROTECTED] mailing list
I tried cvsup src-all just now and it says command not found.
Elijah
Kent Stewart wrote:
On Tuesday 27 July 2004 05:45 am, Duggan wrote:
I am new to FreeBSD and am using it as linux has a problem with my
setup that I was unable to resolve. Anyways, I am liking what I have
read about FreeBSD.
I
What is this buildworld stuff about?
Elijah
Kent Stewart wrote:
On Tuesday 27 July 2004 05:45 am, Duggan wrote:
I am new to FreeBSD and am using it as linux has a problem with my
setup that I was unable to resolve. Anyways, I am liking what I have
read about FreeBSD.
I am a bit of a control
On Tuesday 27 July 2004 06:16 am, Duggan wrote:
I tried cvsup src-all just now and it says command not found.
Cvsup is a port that you would have to add to your system. Before you
worry about what you have, you might read Chapters 4 and 19 of the
Handbook at
The file libssl.so.3 doesn't exist in either of the directories you
suggested. In fact /usr/obj is a dead end. How would I do a full search?
Elijah
Kent Stewart wrote:
On Tuesday 27 July 2004 05:45 am, Duggan wrote:
I am new to FreeBSD and am using it as linux has a problem with my
setup
Kent Stewart wrote:
On Tuesday 27 July 2004 06:16 am, Duggan wrote:
I tried cvsup src-all just now and it says command not found.
Cvsup is a port that you would have to add to your system. Before you
worry about what you have, you might read Chapters 4 and 19 of the
Handbook at
At 08:52 AM 07/27/2004, Duggan wrote:
The file libssl.so.3 doesn't exist in either of the directories you
suggested. In fact /usr/obj is a dead end. How would I do a full search?
Elijah
# find / -name libssl.so.3
--
J.D. Bronson
Aurora Health Care // Information Services // Milwaukee, WI
On Tue, Jul 27, 2004 at 09:47:35PM +0800, Duggan wrote:
What is this buildworld stuff about?
It's one of the two great things that makes FreeBSD stand out from the
crowd. You can pull the latest system sources down from the net and
compile, install and use a whole new system -- utilities,
EJINSIDE# pkg_add -r links
/usr/libexec/ld-elf.so.1: Shared object libssl.so.3 not found
It sound like you did not install the crypto package.
To install it now, do the following:
/stand/sysinstall
-Configure-Distributions-crypto
then select your ftp mirror, and you should be done.
HTH,
Hello,
I have an IMB xSeries 220 server with Dual 1.2 GHz P3's and an IBM ServeRAID
card. Due to the ServeRAID card I need to install FreeBSD 5.x. The question
is, how stable is 5.2.1 at this point? All I really need to install and run
on the system is MySQL and PostgreSQL. PostgreSQL will only
Hello
Sorry for my ignorance, am new to FreeBSD... which is the kernel config file?
is it a configuration for compiling or at boot time? am linux user so will
not bee too hard, just tell me which is the file pls :D
Well, in pre 5.xxx versions it is in /usr/src/sys/i386/conf.
You should
Hi!
I have 5.2.1 running on an SMP machine and it works just fine. I never had any
crashes. The machine is used for numerical calculations. I don't know about
the RAID but SMP seems to work fine (for me).
Cheers,
Ben
On Tuesday 27 July 2004 14:07, Joseph Koenig wrote:
Hello,
I have an IMB
On Tue, Jul 27, 2004 at 08:38:00AM +, M.M. Yang wrote:
Hi all,
I'm reading the function ia64_init()sys/ia64/ia64/machdep.c, and try
to use printf to output some information. But if I put printf before
msgbufinit(), I won't see any word I expect by using dmesg.
That's correct.
In
hello
i'm interested in configuring PAM on my 4x system so that a user is locked out of
ignored if trying to log in unsuccessfully via ftp within the space of a minute or so.
i'm trying to eliminate brute force attacks...
can anyone point me towards some good tutorials on how to do this?
Trying to get SASL to work with Heimdal 0.6 on FreeBSD 5.2.1. When doing
the sample-server test, it finds my ticket OK and presents a response
that the sample-client accepts and gives its response. The problem is
when sending that client response back to the server, this is what
happens:
esmtp#
Has anyone gotten FreeBSD on this machine(HP ProLiant ML110 tower
server) and if so, was there any issues ? I am considering getting one
of these as my main File/Mail Server and so far it seems to be a good
deal for a single user LAN Server.
stm
___
I just recompiled a 4.10 kernel with bfe support.
I grab source code from http://people.freebsd.org/~dmlb/bfe-4.8.tar.gz
At boot time, I get:
pci1: unknown card (vendor=0x14e4, dev=0x170c) at 14.0 irq 11
When I try to insert the driver manually:
module_register: module pci/bfe already exists!
I used to do transparent http proxying with ipfw and Squid,
but lost that when I switched from ipfw to ipf. The Squid
port Makefile says:
#This option does not work on FreeBSD at the moment:
#
#--enable-ipf-transparent
# Enable Transparent Proxy support for IP-Filter systems (incl
I installed both Gnome and KDE (FreeBSD 5.2.1) and have been keeping both up
to date for some time. But I scarcely ever use Gnome, and don't want the
hassle of running the 2.6 upgrade script.
How do I de-install Gnome 2.4.2? Will removing the metaport alone suffice?
(When I recently
Mark Ovens wrote:
I'm seeing the same problem on my dual Athlon box. The freezes are
totally random AFAICT, sometimes when the machine is just idling.
I've not used any CPU-specific make options but may try setting some to
see if it makes a difference. One thing though, I only have
cpu
Hello,
I've installed apcupsd (latest in ports) on a FreeBSD-5.2.x server.
The server has an APC BackUPS Pro 1000i ups system connected to it via the APC
supplied 940-0020B serial signalling cable.
After installing apcupsd, the message from pkg-message appears, instructing the
following:
I'm running Postgres 7.4 installed from a just cvsupped FreeBSD ports.
I've got a production machine that's going to need a lot of upgrades, and
I want to test them out prior to upgrading the production environment.
So I built a jail on the production machine to install the new software
in and
--
Dear Robert
Thank you
After complied it, it overwrite my previous net-snmp
How can I avoid it
Thank you
make -DDISABLE_CONFLICTS install
Robert Huff
Hi all
I have this problem when complied zebra to support snmp
=== ucd-snmp-4.2.6_3 conflicts
Stacey Roberts wrote:
[snip]
The other problem I've got is that with the instruction to create a soft link
for /dev/usv, on reboot, that soft link is of course disappears, so I
have to
manually recreate that soft link again, before (again) manually starting apcupsd from cmdline.
You need to make
do you provide also C-sources of your utilities on your web-page?
if yes, where can i find them?
thank you
PS: i know, my english is not very good :-(
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Hi Peter,
Thanks for the reply.
- Original Message -
From: Peter Risdon [EMAIL PROTECTED]
To: To Stacey Roberts
Date: Tue, 27 Jul, 2004 20:12 BST
Subject: Re: apcupsd vs FreeBSD-5.2.x
Stacey Roberts wrote:
[snip]
The other problem I've got is that with the instruction to create a
Stacey Roberts wrote:
Hi Peter,
Thanks for the reply.
Stacey Roberts wrote:
[snip]
The other problem I've got is that with the instruction to create a soft
link
for /dev/usv, on reboot, that soft link is of course disappears, so I
have to
manually recreate that soft link again, before
lucky wrote:
do you provide also C-sources of your utilities on your web-page?
if yes, where can i find them?
thank you
PS: i know, my english is not very good :-(
___
[EMAIL PROTECTED] mailing list
Chris wrote:
When I get my nightly email from the security run output it normally has about the
last 20 lines or less from the /var/log/messages. Is there a way to increase that to about the
last 50 lines?
Thanks,
Chris
Hmm, I don't think that it's necessarily true that /etc/periodic
is
lucky wrote:
do you provide also C-sources of your utilities on your web-page?
if yes, where can i find them?
thank you
PS: i know, my english is not very good :-(
And please, fixup your mailserver, it loops back to yourself :-)
(private mailing wont work i am afraid)
--
Kind regards,
Remko
Karol Kwiatkowski wrote:
Mark Ovens wrote:
I'm seeing the same problem on my dual Athlon box. The freezes are
totally random AFAICT, sometimes when the machine is just idling.
I've not used any CPU-specific make options but may try setting some to
see if it makes a difference. One thing though,
On Tue, 27 Jul 2004 21:33:44 +0200 (CEST)
lucky [EMAIL PROTECTED] wrote:
do you provide also C-sources of your utilities on your web-page?
if yes, where can i find them?
http://www.freebsd.org/cgi/cvsweb.cgi/
--
IOnut
Unregistered ;) FreeBSD user
In the last episode (Jul 27), lucky said:
do you provide also C-sources of your utilities on your web-page?
if yes, where can i find them?
Yes; you can browse the source at http://www.freebsd.org/cgi/cvsweb.cgi/, or
download it from ftp.freebsd.org, or fetch it online and keep up-to-date
with
On Mon, Jul 26, 2004 at 12:33:53PM -0400, Hakim Singhji wrote:
Hello All,
I recently purchased a pair of 3Com 3C905CTXM EtherLink XL PCI TX Network
adapter PCI 100 Mbps NIC Cards and I wanted to know if they are
compatible with FreeBSD 4.10 (stable). Could someone please give me some
do you provide also C-sources of your utilities on your web-page?
if yes, where can i find them?
in installation.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
All,
I have two 160GB disks I want to mirror (ad0 and ad2). I loaded a fresh
install FreeBSD 4.10-RELEASE on the boot disk, and are following the
mirroring instructions at:
http://devel.reinikainen.net/docs/how-to/Vinum/
I have successfully added one half of the mirror and now are
1. I am running freeBSd ssd 5.2.1 on ~ntel
motherboard (D865GBL) with a intel 3.2 GHZ
pentium 4 cpu (BX80546GP320).
I have a hp laserjet 1300 connected to
a parallell port with the following
communications mode:
lptcontrol -i -d /dev/lpt0
I have no problems printing either plane text
or
Hi Peter,
- Original Message -
From: Peter Risdon [EMAIL PROTECTED]
To: To Stacey Roberts
Date: Tue, 27 Jul, 2004 21:00 BST
Subject: Re: apcupsd vs FreeBSD-5.2.x
Stacey Roberts wrote:
Hi Peter,
Thanks for the reply.
Stacey Roberts wrote:
[snip]
The other problem I've got
Have you tried 'make deinstall' at the Gnome directory
under '/usr/ports/../gnome'?
(The Gnome's port directory may differ.)
--- R. W. [EMAIL PROTECTED]
wrote:
I installed both Gnome and KDE (FreeBSD 5.2.1) and
have been keeping both up
to date for some time. But I scarcely ever use
Stacey Roberts wrote:
Hi Peter,
- Original Message -
From: Peter Risdon [EMAIL PROTECTED]
[snip]
So you'd want:
link cuaa1 usv
Okay, I understand. And I take it that if the serial signalling cable is actually
connected to (labeled) serial port 1, then the corresponding device tobe
R. W. [EMAIL PROTECTED] writes:
I installed both Gnome and KDE (FreeBSD 5.2.1) and have been keeping both up
to date for some time. But I scarcely ever use Gnome, and don't want the
hassle of running the 2.6 upgrade script.
How do I de-install Gnome 2.4.2? Will removing the metaport
Hi,
- Original Message -
From: Peter Risdon [EMAIL PROTECTED]
To: To Stacey Roberts
Date: Tue, 27 Jul, 2004 22:56 BST
Subject: Re: apcupsd vs FreeBSD-5.2.x
Stacey Roberts wrote:
Hi Peter,
- Original Message -
From: Peter Risdon [EMAIL PROTECTED]
[snip]
So you'd want:
Date: Tue, 27 Jul 2004 20:45:50 +0800
From: Duggan [EMAIL PROTECTED]
Subject: FreeBSD 4.10 pkg_add Shared object libssl.so.3 not found?
To: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]
I am new to FreeBSD and am using it as linux has a problem with my setup
that I was unable to resolve.
Good day to all. I have been going crazy trying to get K3b to work.
Everytime I attempt to burn a cd, the system freezes and reboots. I have been
on the formus for a month now trying to find a soulution. Seems a lot of
other people are having the same issue, and all theses guys are pointing to
I ran FreeBSD for the first time last week; I have 4.10 working.
Following http://users.rcn.com/rneswold/fbsd-init.html I have set up
console fonts in /etc/rc.conf and set up 50-line mode in /etc/ttys.
I can use vidcontrol VGA_80x50 and vidcontrol green black from the
console to set ttyv0 or
In the last episode (Jul 27), Jay O'Brien said:
I cannot make it set up the VGA_80x50 and 'green black' parameters
when booting up. I've tried many iterations of the text in
/etc.rc.local or /etc.rc.conf.local and I get errors and failures to boot
that forced me to learn about single-user
Hi, I'm trying to use greek fonts in x11/kde in 4.8-release.
I'm currently using
MM_CHARSET=ISO-8859-7; export MM_CHARSET
LANG=el_GR; export LANG
LC_ALL=el_GR; export LC_ALL
But I keep getting the error:
Warning: locale not supported by C library, locale unchanged
Can someone point me in the
After a system crash (e.g. a power failure), the terminal-less FreeBSD
5.2.1-RELEASE I run does not boot up properly any more. Here is an
excerpt from /var/log/messages:
Jul 25 20:18:04 server kernel: Mounting root from ufs:/dev/ad0s1a
Jul 25 20:18:04 server kernel: WARNING: / was not properly
Dan Nelson wrote:
In the last episode (Jul 27), Jay O'Brien said:
I cannot make it set up the VGA_80x50 and 'green black' parameters
when booting up. I've tried many iterations of the text in
/etc.rc.local or /etc.rc.conf.local and I get errors and failures to boot
that forced me to learn
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Hmm, I found:
/etc/periodic/security/700.kernelmsg
which seems to be what generates the information I was talking about in the email. So
I guess you were correct that it's not from /var/log/messages after all.
Having
I just got an AMD64 laptop and I'm having a problem with CPU(auto) scaling.
Its running 5.2.1 and it looks like it running at 800MHz, is it possible to
scale this up to full speed? And how?
___
[EMAIL PROTECTED] mailing list
On Tue, Jul 27, 2004 at 03:55:26PM -0700, Jay O'Brien wrote:
Dan Nelson wrote:
In the last episode (Jul 27), Jay O'Brien said:
I cannot make it set up the VGA_80x50 and 'green black' parameters
when booting up. I've tried many iterations of the text in
/etc.rc.local or
What Dan meant to say is add this line to your rc.conf file and
reboot
allscreens_flags=-m on 80x50 green black
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Dan Nelson
Sent: Tuesday, July 27, 2004 6:42 PM
To: Jay O'Brien
Cc: FreeBSD - questions
Subject:
On Tue, 27 Jul 2004 18:40:19 -0400
Derrick Edwards [EMAIL PROTECTED] wrote:
Good day to all. I have been going crazy trying to get K3b to work.
Everytime I attempt to burn a cd, the system freezes and reboots. I have been
on the formus for a month now trying to find a soulution. Seems a lot
Hi,
Derrick Edwards wrote:
Good day to all. I have been going crazy trying to get K3b to work.
Everytime I attempt to burn a cd, the system freezes and reboots. I have been
on the formus for a month now trying to find a soulution. Seems a lot of
other people are having the same issue, and all
Dan, Erik, JJB...
Thank you all, that worked. And once I saw the whole screen with
green on black, (ugh!) I went back to white on black. But now at
least I know how to do it!
Now to find the syntax for allscreens_flags and learn about that
argument. I may want to set different virtual
In the last episode (Jul 27), Jay O'Brien said:
Thank you all, that worked. And once I saw the whole screen with green on
black, (ugh!) I went back to white on black. But now at least I know how
to do it!
Now to find the syntax for allscreens_flags and learn about that argument.
I may want
I'm having a problem setting up Samba(Ver 2.2.7a) on FreeBSD. Ive already set Samba up
on RedHAt and Mandrake with no issues.
I can see the icon for the FreeBSD share under Network Neighborhood but when it is
clicked I get the message:
The computer or sharename could not be found.
On the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Olaf Hoyer wrote:
| On Sat, 24 Jul 2004, Hakim Z. Singhji wrote:
|
||
|| 10/100? There are less Gigabit types that are supported, yet,
|| but then the reason for that should be pretty obvious.
||
|| Anyway, you generally can't go wrong with 3Com.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Pavel Duda wrote:
| Hakim Z. Singhji wrote:
|
| Does anyone have any suggestions
| on the type of NIC I should use?
|
|
| Almost any normal NIC will be fine. I'm using mostly Realtek-based
| (RTL8139) and Intel (8255) cards wo problems.
|
|
Stanley Wright wrote:
I'm having a problem setting up Samba(Ver 2.2.7a) on FreeBSD. Ive already set Samba up
on RedHAt and Mandrake with no issues.
I can see the icon for the FreeBSD share under Network Neighborhood but when it is
clicked I get the message:
The computer or sharename could not be
It is safe to install ports from
within KDE ?
At present I shut down KDE, go to
the command line and start a Make.
If I need to get a file manually
from somewhere, I go back into KDE
to get it.
I would rather do it all from
within KDE if possible. The Shell
Konsole appears to be the same as
Hi Jay,
I am quite confused about this diablo
jre install.
I just tried installing diablo jre 13
from the ports collection, but it tells
me to get the file manually from
freebsdfoundation. The file it wants
me to download is
diablo-latte-1.3.1-0.tar.bz2
I had already put a downloaded file
I just got a new AMD64 laptop(I8254) and it appears to be running at 800MHz
on 5.2.1-R
CPU: AMD Athlon(tm) 64 Processor 3200+ (800.03-MHz K8-class CPU)
I have no idea how to fix this! Would upgrading to -CURRENT help at all?
___
[EMAIL PROTECTED]
Peter Ryan [EMAIL PROTECTED] wrote:
It is safe to install ports from
within KDE ?
At present I shut down KDE, go to
the command line and start a Make.
If I need to get a file manually
from somewhere, I go back into KDE
to get it.
I would rather do it all from
within KDE if
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Peter Ryan
Sent: Tuesday, July 27, 2004 8:57 PM
To: FreeBSD
Subject: can I use Make from within KDE Shell Konsole
It is safe to install ports from
within KDE ?
At present I shut down KDE, go to
Hello,
sorry if it is wrong place to address this issue to...
Could anybody port apcupsd daemon or something else on FreeBSD to support
APC UPS USB connection?
Or is it already done?
Regards,
Konstantin Nizhegorodov.
___
[EMAIL PROTECTED] mailing
89 matches
Mail list logo
