On Sat, 13 Nov 2004, [EMAIL PROTECTED] wrote:
Hello all.
vidcontrol -g 132x25 VESA_132x25 don't work.
When I run this command, computer is rebooting.
I do not believe that 5.2 can do more than 100x37 on VESA_800x600.
To enable it you have to recompile your kernel with
option SC_PIXEL_MODE
I recently was reading the handbook on setting up a VPN using IPSec and
I believe I've found a couple of bugs in the handbook. The following
line is used to enable IPSec over the IP in IP tunnel:
spdadd A.B.C.D/32 W.X.Y.Z/32 ipencap -P out ipsec \
esp/tunnel/A.B.C.D-W.X.Y.Z/require
When I
*** Ceci est un message automatique, veuillez ne pas y repondre ***
En raison du nombre croissant de spam nous n'acceptons plus
d'email a cette adresse.
Pour contacter le support Ulimit vous devez remplir le formulaire
a l'adresse suivante:
http://www.ulimit.com/en/support.php
Merci de votre
On Sunday, 14 November 2004 at 2:46:17 +0100, Gert Cuykens wrote:
7rxI# kldload snd_driver.ko
Did you try kldload snd_driver
(without the .so extension?)
Kjell
kldload: can't load snd_driver.ko: Exec format error
7rxI#
___
[EMAIL PROTECTED] mailing
On Sat, 2004-11-13 at 16:48 -1000, Robert Marella wrote:
snip
mount_msdosfs /dev/da3s1 media
^^
Good Luck
Robert
Thanks very much Robert, that worked perfectly. I can now access the
Videos I record on my Nokia phone via the media reader and FreeBSD.
In case anyone
I recently got a IPSec VPN working between two FreeBSD 5.3 boxes with
ESP and AH. I decided to try adding IPComp to the mix to compress the
data, but it doesn't seem to do anything. All sniffs of the network
traffic show the VPN working, but IPComp never shows up. I first tried
IP in ESP in
Certain tasks that have been doing on FreeBSD like installing ports seem
to interrupt my music playing. Particually when portupgrade is
extracting/checksumming and when it is updating the package database.
Now to try and solve this I tried to set xmms to use realtime priority
and made it setuid
Hi,
I get these error when browsing some site (e.g cisco.com)
konqueror: ERROR: Error in BrowserExtension::actionSlotMap(), unknown action :
searchProvider
konqueror: ERROR: Error in BrowserExtension::actionSlotMap(), unknown action :
searchProvider
konqueror: ERROR: Error in
On Sun, 14 Nov 2004 02:26:40 -0800
Loren M. Lang [EMAIL PROTECTED] wrote:
Hi,
Now to try and solve this I tried to set xmms to use realtime priority
and made it setuid root. According to top it's running at priority 20
nice -76 so it seems to be running realtime, but portupgrade can still
On Sat, Nov 13, 2004 at 09:12:37PM +, Jonathon McKitrick wrote:
I've been using one for some time, but now that I have a mini network, it
has become a bit of a hassle updating the rules.
If I disable all services but ssh, stay STABLE, and do not have a broadband
connection, what danger
Budi Hermansjah wrote:
Hi
I have FreeBSD 4.10-STABLE, i386. And i installed BIND 8.3.7
my /etc/rc.conf as follows:
Also, are you sure you have bind8? since bind 8 uses ``ndc''
instead of ``rndc'', also you should have appropriate keys
in your config if you do have bind9 (which uses rndc) so
that
Budi Hermansjah wrote:
Hi Budi,
connect
rndc: connect failed: timed out
indoglobalhost#
i need help how to fix the problem,
thanks
What does your logging tell you?
for example can you try to start it and readout
the logfile (/var/log/messages for example)
Perhaps that tells you something...
--
Recvsup and rebuild. Did you change anything in /etc/make.conf?
No, absolutely not. This is my /etc/make.conf:
# -- use.perl generated deltas -- #
# Created: Wed Nov 10 22:37:45 2004
# Setting to use base perl from ports:
PERL_VER=5.8.5
PERL_VERSION=5.8.5
PERL_ARCH=mach
NOPERL=yo
NO_PERL=yo
I'm trying to implement a Mandatory Access Controll setup, just like the one in
the example of the FreeBSD handbook:15.14 Implementing a Secure Environment
with MAC.The graphics card setup itself is very straight forward and didn't
cause any problem(s).When i run startx i get the following
I'm looking for good USB Serial adapters for FreeBSD. Currently all the
work has been done on a couple of Linux boxes, but I'd like to be able to
use my own desktop for some of the work. Looking at the Hardware Guide,
it looks like FreeBSD supports a lot less drivers than Linux currently
does,
robg wrote:
I'm trying to setup BIND and the Release Notes say:
When the named_chroot_autoupdate variable is set to YES (the
default), the chroot directory is automatically configured at the boot
time. A symbolic link which points to /var/named/etc/namedb is created
as /etc/namedb, and a symbolic
Test
-
Do you Yahoo!?
Check out the new Yahoo! Front Page. www.yahoo.com
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Hi,
I've tried installing codeweavers crossover office pro 3.0 on my laptop
running FreeBSD 5.2.1 . Using linux-emulation it installs fine but when
I try to use it I get a Unable to convert'c:\' to a Unix path-error. I
tried putting the full path name to c: in the wine config file but
that
Gnome 5th toe install is failing at the gaim package install.
Info;
1. FreeBSD 4.10 i386
2. Gnome 2.8
3. Fully up2date ports port tree
Error Message;
log.c: in function 'gaim_log_write'
log.c:81: syntax error before 'struct'
log.c:84: 'lu' undeclared (fsrt use in this function)
log.c:84:Each
Yeah i fixed that problem, (and posted the fix)
This install is gonna be the death of me, but im almost there, if someone could
help me over this last hurdle.
Regards
Danny.
Brian [EMAIL PROTECTED] wrote:
Danny Browne wrote:
Gnome 5th toe install is failing at the gaim package
It seems that USB keyboard and mouse wireless sets doesn't work properly in
FreeBSD (my opinion based on mailing lists archives). At least sets
from A4Tech (see my earlier post), Logitech, Chicony M$.
These sets works fine in Linux and M$ Windows.
I think because of better HID support. Mouse
Jay O'Brien wrote:
Thanks Henrik and Ruben, Good input from you both.
To be sure which HD I'm on, I made (empty) directories in the root
of each drive, called (either) ..AD0 or ..AD1. In this way the HD's
aren't completely identical, and I can see which one boots.
I agree that boot0
On Sunday 14 November 2004 14:19, Roman V. Kiseliov wrote:
It seems that USB keyboard and mouse wireless sets doesn't work properly
in FreeBSD (my opinion based on mailing lists archives). At least sets from
A4Tech (see my earlier post), Logitech, Chicony M$.
These sets works fine in Linux
Greetings, list!
I've been running FreeBSD/amd64 5.3-STABLE happily for months now, and
haven't had a problem. However, since recently installing gtk-gnutella,
I've been experiencing freezes and lockups. When downloading stuff off
of Gnutella and browsing the web, the system will just lock up
Francisco Reyes wrote:
Migrating a 4.10 box.
Copied data to a second drive.
Installed 5.3
Changed kernel to add
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=50
options IPDIVERT
In /etc/rc.conf have
firewall_enable=YES
Cheers mate,
That installed an older port of gaim, but it seems to have worked. Wheni tried
to portupgrade it i got the same error, so i just left the older port and it
seems to satisfy Gnome. Must be some bug in the latest port.
Thanks a mil.
Danny.
Brian [EMAIL PROTECTED] wrote:
Danny
Hi, FreeBsdBeni,
Sunday, November 14, 2004, 4:30:46 PM, you wrote:
F On Sunday 14 November 2004 14:19, Roman V. Kiseliov wrote:
It seems that USB keyboard and mouse wireless sets doesn't work properly
in FreeBSD (my opinion based on mailing lists archives). At least sets from
A4Tech (see my
On Sat, Nov 13, 2004 at 10:12:24PM +0100, Gert Cuykens typed:
i just updated my src to releng_5
Sat Nov 13 22:01:04 CET 2004
anything i should know of ?
Read /usr/src/UPDATING
If i do make installkernel and reboot without make installworld. The
old kernel will be loaded right ?
Wrong. The
On Sat, Nov 13, 2004 at 01:54:47PM -0800, Jay O'Brien typed:
Apparently I will have to make some changes to the files on the
second drive so that the first drive won't be used at all when
the system is booted from the second drive. Which files?
/etc/fstab ?
Hi list, I've recently installed FreeBSD 4.9 and set up ppp to connect
to the Internet. Before recompiling the kernel everything went just
fine after writing the ip adresses of my primary and secondary
nameservers in /etc/resolv.conf. Then I recompiled the kernel and
added IPFIREWALL ,
Emil Khatib wrote:
[ ... ]
The firewall rules are:
pass udp from me to any 53 keep-state
pass tcp from me to any 20 keep-state
pass tcp from me to any 21 keep-state
pass tcp from me to any 80 keep-state
So I want to allow DNS, FTP and HTTP.
Your rules aren't enough to work right; at the very
Hi all
I have a fbsd 4.7 box that has 2 nics rl0 rl1. On rl0 i have a public
ip address and on rl1 I have a private 10.20.30.0/24, and I'm running
squid proxy for my private ip's.
Now i've added a 3rd nic rl2 which has an ADSL router connected to it
(another internet source).
What I wanted to
i have 2 questions.
first one: i have an pppoe connection that conects normally, get the dns and
put them on /etc/resolv.conf. but after some time the /etc/resolv.conf file
loses the dns and replaces with a 10.0.0.138 file and not a valid email. what
should i do ?
second: how can i stop a ppp
On Sunday 14 November 2004 04:52 am, Robert Kot wrote:
Recvsup and rebuild. Did you change anything in /etc/make.conf?
No, absolutely not. This is my /etc/make.conf:
# -- use.perl generated deltas -- #
# Created: Wed Nov 10 22:37:45 2004
# Setting to use base perl from ports:
Robert Kot wrote (quoting Subhro):
Recvsup and rebuild. Did you change anything in /etc/make.conf?
No, absolutely not. This is my /etc/make.conf:
# -- use.perl generated deltas -- #
# Created: Wed Nov 10 22:37:45 2004
# Setting to use base perl from ports:
PERL_VER=5.8.5
PERL_VERSION=5.8.5
On Sun, 14 Nov 2004, John Murphy wrote:
Section 14.9.6.3 /etc/rc.conf Options says:
If you don't have IPFW compiled into your kernel you will need to
load it with the following statement in your /etc/rc.conf:
firewall_enable=YES
I eventually figured it out.. after HOURS of checking around.
I did
hi, i just switched to freebsd5.3 from 4.8 by a clean
install, and now i am in the middle of rebuilding
everything. Now there are 2 problems and I kinda get
bumped out.
(1) no sound, my sound module is SiS7018 onboard on
A7S-VM m-board. I have read some articles and added
device sound device
I have had similar problem with firefox this weekend, solution:
cvsup ports-supfile
cd /usr/ports/x11-toolkits/gtk20
make deinstall
make reinstall
Cheers
Dusan Galik
___
[EMAIL PROTECTED] mailing list
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
How come i can't enter the #Freebsd channel
... im using the freenode server? i have some
queries.
I have no idea. I'm forwarding this to the list,
maybe someone there can help you.
--
Danny
I beg your pardon. I completely misunderstood the whole point of the
problem. Sorry, I was just a little excited over getting my own setup
going just recently :)
I don't know if it will help, but it looks to me like the memory
restrictions in your login.conf are giving problems with startx.
On Sun, 14 Nov 2004 09:04:51 -0700
Dan MacMillan [EMAIL PROTECTED] wrote:
Hi,
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
How come i can't enter the #Freebsd channel
... im using the freenode server? i have some
queries.
I have no idea. I'm
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ruben de Groot
Sent: Sunday, November 14, 2004 19:27
To: Gert Cuykens
Cc: [EMAIL PROTECTED]
Subject: Re: upgrade 5.3b7
snip
Read /usr/src/UPDATING
If i do make installkernel and reboot without make
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of T.F. Cheng
Sent: Sunday, November 14, 2004 20:46
To: [EMAIL PROTECTED]
Subject: help.need help
hi, i just switched to freebsd5.3 from 4.8 by a clean
install, and now i am in the middle of
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Murphy
Sent: Sunday, November 14, 2004 20:44
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Kernel compilation failed in 5.3-RELEASE
snip
How can I do recvsup ? Sorry for the stupid
-Original Message-
From: Robert Kot [mailto:[EMAIL PROTECTED]
Sent: Sunday, November 14, 2004 16:22
To: Subhro
Cc: [EMAIL PROTECTED]
Subject: Re: Kernel compilation failed in 5.3-RELEASE
Recvsup and rebuild. Did you change anything in /etc/make.conf?
No, absolutely not. This is my
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Henrik W Lund
Sent: Sunday, November 14, 2004 19:04
To: [EMAIL PROTECTED]
Subject: Panic under heavy HTTP load?
snip
Has anyone else experienced this? Is my system even panicing (I wouldn't
know, I
More of a general gripe thatn a question,
Why are most of the ports for BSD s poorly documented. This is somethig i
was very suprised at.
I am not looking in the right places?
For example, try and find some page on the web that will tell what the latest
version of gnome fifth toe, (or
+++ Matthias Buelow [freebsd] [13-11-04 01:37 +0100]:
| Sean Murphy writes:
|
| How does one take screen shots of the FreeBSD Install and Terminal? I
| would like to make a guide specific to our location.
|
| The most straightforward way is maybe to do an installation inside
| emulators like
On Sun, Nov 14, 2004 at 05:14:39PM +, Danny Browne wrote:
More of a general gripe thatn a question,
Why are most of the ports for BSD s poorly documented. This is somethig i
was very suprised at.
This isn't the fault of the FreeBSD project: the ports system can only
provide
Hi, you are right, I should att those files. thansk!
--- Subhro [EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of T.F. Cheng
Sent: Sunday, November 14, 2004 20:46
To: [EMAIL PROTECTED]
Subject: help.need help
Dear all,
perhaps someone can explain me why I can't execute a x-program via a ssh
session after some time (some hours). When I log into the machine everything
is fine and xclock or any other x11 application is working fine.
But after some hours, when I try to execute exactly the same
Finally installed gnome fifth toe! Wooho.
However, the sysinstall command is not found now. sysinstall still exists in
/stand/sysinstall but evenwhen typed in the /stand directory it still says
sysinstall: command not found.
is there any way to reinstall it?? i havent configured my mouse
Am Sonntag, 14. November 2004 19:32 schrieb Danny Browne:
Finally installed gnome fifth toe! Wooho.
However, the sysinstall command is not found now. sysinstall still exists
in /stand/sysinstall but evenwhen typed in the /stand directory it still
says sysinstall: command not found.
Gnome
is there any way to reinstall it?? i havent configured my mouse screen,
graphics card etc... yet. Thats really all i need sysinstall for. is there
any way around this?
danny,
you can allways set xorg settings with
$ xorgconfig
___
[EMAIL PROTECTED]
This is insane.
i dont know how this happened but it says;
xorgconfig: Command not found
This is on a fresh install of FreeBSD 4.10
Can't figure it out.
Danny
Luciano Musacchio [EMAIL PROTECTED] wrote:
is there any way to reinstall it?? i havent configured my mouse screen,
graphics
Dusan Galik wrote:
I have had similar problem with firefox this weekend, solution:
cvsup ports-supfile
cd /usr/ports/x11-toolkits/gtk20
make deinstall
make reinstall
Cheers
Dusan Galik
ports/UPDATING has an entry regarding the gnome upgrade and instructions
that should be followed.
--
Jeremy
Ok, got sysinstall going by browsing to /stand directory and typing
/sysinstall
but when i go
Configure Xfree86 xf86cfg
it says The Xfree86 setup utility you chose does not appear to be installed!
Please install this before attempting to configure XFree86.
Does this have something to do
I'm trying to get myself back on the FreeBSD bus after a long while off to
the side (on a bad track named Linux). I'm taking my FreeBSD-5.1 system,
I cvsupped it, and I'm trying to get it back to current, and having some
problems. I am hitting some problems, and i don't want to have a panic
Well, I don't know where to begin, but my server, which has been running
hands-off for months, is giving me fits now since I rebooted. Let's start
with the most obvious problem - after installing php5 and php5-extenstions,
I get a core dumped if I type:
$ php
And I think, by extension, I get a
Subhro wrote:
snip
Tell us something about your hardware. Are you running a stock kernel? Any
non standard optimizations employed while recompiling in case you are not
running stock stuff?
Regards
S.
Subhro Sankha Kar
Block AQ-13/1, Sector V
Salt Lake City
PIN 700091
India
I'm running on an Asus
begin quotation of Danny Browne on 2004-11-14 19:08:16 +:
Ok, got sysinstall going by browsing to /stand directory and typing
/sysinstall
but when i go
Configure Xfree86 xf86cfg
it says The Xfree86 setup utility you chose does not appear to be
installed! Please install this
Hello,
Is (or will be) any experimental driver available for the Longshine LCS-8039-TX
network card (gigabit ethernet)?
Thank you
Marco M.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
On Sun, 14 Nov 2004, FreeBsdBeni wrote:
On Sunday 14 November 2004 14:19, Roman V. Kiseliov wrote:
It seems that USB keyboard and mouse wireless sets doesn't work properly
in FreeBSD (my opinion based on mailing lists archives). At least sets from
A4Tech (see my earlier post), Logitech,
-Original Message-
From: Henrik W Lund [mailto:[EMAIL PROTECTED]
Sent: Monday, November 15, 2004 1:05
To: Subhro
Cc: [EMAIL PROTECTED]
Subject: Re: Panic under heavy HTTP load?
snip
I managed to reproduce the freeze just hours ago, under conditions that
were different enough from
Hi! I'm working under FreeBSD 5.2.1
I was trying to create if-filter for /etc/printcap. So, I writing
some frome handbook:
exec 31 12
/usr/local/bin/gs -dSAFER -dNOPAUSE -q -sDEVICE=$GS_DEVICE \
-sOutputFile=/dev/fd/3 - -c quit
but, It's does not work --- there not device /dev/fd/3. Whn I
Jay O'Brien wrote:
Thanks again Henrik and Ruben, you found the problem for me.
I've now built a new installation of 5.3 on ad0, and I have
a copy of the 4.10 install on ad1. Now there's no question
about which is running.
I edited ad1's /etc/fstab to change all instances of ad0 to
ad1, and
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chuck Robey
Sent: Monday, November 15, 2004 1:18
To: [EMAIL PROTECTED]
Subject: rebuild problems
snip
I finished the cvsup,
Which version of the tree did u cvsup to?
rebuilt everything, and it built
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jonathan Arnold
Sent: Monday, November 15, 2004 0:54
To: [EMAIL PROTECTED]
Subject: php5 problems
Well, I don't know where to begin, but my server, which has been running
hands-off for months, is giving me
[Eugene M. Minkovskii, 2004-11-14]
Who can tell me: why I can't create /dev/fd/3 (evenly under
root!), and what shell I do for create this?
see fdescfs(5)
___
[EMAIL PROTECTED] mailing list
On Mon, 15 Nov 2004, Subhro wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chuck Robey
Sent: Monday, November 15, 2004 1:18
To: [EMAIL PROTECTED]
Subject: rebuild problems
snip
I finished the cvsup,
Which version of the tree did u
Subhro wrote:
snip
Can we have a package list i.e. the output of pkg_info?
Also can u provide ps -aux as root just before the box freezes or when
it is expected to freeze?
In that case I would try to reproduce the same on some older hardware.
Subhro Sankha Kar
Block AQ-13/1, Sector V
Salt Lake
Subhro wrote:
snip
Can we have a package list i.e. the output of pkg_info?
Also can u provide ps -aux as root just before the box freezes or when
it is expected to freeze?
In that case I would try to reproduce the same on some older hardware.
Subhro Sankha Kar
Block AQ-13/1, Sector V
Salt Lake
On Sun, 14 Nov 2004, Roman V. Kiseliov wrote:
Hi, FreeBsdBeni,
I just realized I did something wrong, I better own up before it gets
worse. On all this problems, it's all on my AMD64 system, not on my Intel
one. I'm not sure, in 'questions', if there's an implied version or not,
didn't want
On Sun, Nov 14, 2004 at 09:37:44PM +0100, Svein Halvor Halvorsen wrote:
[Eugene M. Minkovskii, 2004-11-14]
Who can tell me: why I can't create /dev/fd/3 (evenly under
root!), and what shell I do for create this?
see fdescfs(5)
Ok, I was reading this, and what? What shell I do in the
-Original Message-
From: Henrik W Lund [mailto:[EMAIL PROTECTED]
Sent: Monday, November 15, 2004 2:22
To: Subhro
Cc: [EMAIL PROTECTED]
Subject: Re: Panic under heavy HTTP load?
snip
Something just occurred to me: my gtk-gnutella is linked with gtk2, not
gtk1, which is the default.
What is the procedure for setting up an internal modem in shell (sio1 moved to
sio4) and configuring under GNOME. The modem itself is recognised when booting.
Thx, Richard
___
[EMAIL PROTECTED] mailing list
On Sun, 14 Nov 2004 23:59:24 +0300, Eugene M. Minkovskii
[EMAIL PROTECTED] wrote:
On Sun, Nov 14, 2004 at 09:37:44PM +0100, Svein Halvor Halvorsen
wrote:
[Eugene M. Minkovskii, 2004-11-14]
Who can tell me: why I can't create /dev/fd/3 (evenly under
root!), and what shell I do for
On Sun, Nov 14, 2004 at 05:14:39PM +, Danny Browne wrote:
More of a general gripe thatn a question,
Why are most of the ports for BSD s poorly documented. This is somethig i
was very suprised at.
I am not looking in the right places?
For example, try and find some page on the
On Sun, Nov 14, 2004 at 02:48:17PM -0500, Chuck Robey wrote:
I'm trying to get myself back on the FreeBSD bus after a long while off to
the side (on a bad track named Linux). I'm taking my FreeBSD-5.1 system,
I cvsupped it, and I'm trying to get it back to current, and having some
problems.
I have a radeon 9600 and have been trying to get it working in
dual-head mode. Someone linked me to a screen-shot that showed an
ATI control panel with a dual-head tab. Is there any chance someone
could link me to a site that provides said application. I've
searched google and the ATI
I've downloaded the FreeBSD 5.3 ISO images (disc 01 and 02) and burned
them onto CD's using MAC OS X 10.3 default settings. When installed
into an old Pentium PC CD rom, they are unreadable. I assume the method
of CD Rom burning may be at fault. Could you direct me to a site which
would help
begin quotation of Peter H.Helck on 2004-11-14 18:11:25 -0500:
I've downloaded the FreeBSD 5.3 ISO images (disc 01 and 02) and
burned them onto CD's using MAC OS X 10.3 default settings.
Did you place the ISO images as files on a CD, or did you use the Disk
Utility (under
Hi everybody,
Since I use FB 5.3 (beta 4, I know, I should update), I get a weird
problem.
When I do a ps aux | grep vr0, I get :
root22 0,0 0,0 0 12 ?? WL 23:19 0:15,50 [irq11: vr0
uhci0+]
I assumed that two different device shouldn't be on the same irq.
The problem I have
I've two questions I'm hoping can be answered quickly.
After installing 5.3-RELEASE on my Dell Inspiron 8000 I put the
following into /boot/loader.conf as per usual (previous) convention:
hw.ata.atapi_dma=1
Though the sysctl does get set at boot the dvd drive still attaches as
PIO4 instead of
Hi there,
I'm a newbie to FreeBSD and would like to install 5.3, but I have a few
concerns about compatibility with my graphics card (Hercules Prophet 4500
(Kyro II chipset, I think?)). I couldn't find much Info about setting up a
graphics card in the online installation notes and so I'm
In FreeBSD version 5.2.1, I used the following in the loader.conf file:
hw.ata.ata_dma=1
hw.ata.atapi_dma=0
I was wondering if that is still applicable in the latest version; i.e.,
5.3. In addition, would it be possible for me to build a new kernel with
this support already built into it?
On Sun, Nov 14, 2004 at 07:24:55PM -0500, Gerard Seibert wrote:
In FreeBSD version 5.2.1, I used the following in the loader.conf file:
hw.ata.ata_dma=1
hw.ata.atapi_dma=0
I was wondering if that is still applicable in the latest version; i.e.,
5.3. In addition, would it be possible for
My purpose: Learn FreeBSD, learn Apache, build simple web server.
Hardware: Dedicated i386 machine, three big HDs (120GB, 120GB, 200GB)
OS: FreeBSD 5.3. No X windows installed (maybe later?)
Apps: Also intend to use postfix, majordomo, samba
LAN:Serve LAN with Windows
I tried updating my ports again on 5.3 and it says:
server# screen cvsup -g -L 2 ports-supfile
Parsing supfile ports-supfile
Connecting to cvsup3.us.FreeBSD.org
Cannot connect to cvsup3.us.FreeBSD.org: Permission denied
Will retry at 20:26:17
I tried different server as wel.. what wrong?
--
ok... about every 6 - 7 days the machine reboots because of this:
/kernel: Fatal trap 12: page fault while in kernel mode
/kernel: fault virtual address= 0xbeff2
/kernel: fault code = supervisor read, page not present
/kernel: instruction pointer = 0x8:0xc0305ed3
Hello,
I just installed subversion, and I want to start the standalone
subversion server (svnserve) on every reboot. The command I need to
execute is:
svnserve -d -r /usr/local/repositories
I created a user called subversiond, with the shell in /etc/passwd set
to /nonexistent. If I am logged
On Sunday 14 November 2004 08:19 am, Roman V. Kiseliov wrote:
It seems that USB keyboard and mouse wireless sets doesn't work
properly in FreeBSD (my opinion based on mailing lists archives). At
least sets from A4Tech (see my earlier post), Logitech, Chicony M$.
These sets works fine in
On Sun, Nov 14, 2004 at 09:04:32PM -0500, kalin mintchev wrote:
ok... about every 6 - 7 days the machine reboots because of this:
/kernel: Fatal trap 12: page fault while in kernel mode
/kernel: fault virtual address= 0xbeff2
/kernel: fault code = supervisor read, page
On Sun, Nov 14, 2004 at 09:04:32PM -0500, kalin mintchev wrote:
ok... about every 6 - 7 days the machine reboots because of this:
/kernel: Fatal trap 12: page fault while in kernel mode
/kernel: fault virtual address= 0xbeff2
/kernel: fault code = supervisor read, page
I'm trying to get a BF-810 USB serial adapter working on FreeBSD 5.2.1.
I figured it should be a breeze since it's listed in the uplcom man page
as being supported. I loaded the uplcom kernel module and plugged in
the device. All I got was this:
ucom0: Prolific Technology PL2303 Serial
On Sun, Nov 14, 2004 at 10:12:49PM -0500, kalin mintchev wrote:
On Sun, Nov 14, 2004 at 09:04:32PM -0500, kalin mintchev wrote:
ok... about every 6 - 7 days the machine reboots because of this:
/kernel: Fatal trap 12: page fault while in kernel mode
/kernel: fault virtual address=
Well, I fixed my problem, I changed my /etc/rc.local file to:
su -m subversiond -c 'svnserve -d -r /usr/local/repositories'
However, I still don't know why my other method wasn't working.
-Tabor
___
[EMAIL PROTECTED] mailing list
I learned that in order to make changes to the screen saver,
I had to reboot the computer. Those changes, made by
sysinstall, appear in /etc/rc.conf.
Is there a way to make such changes take effect without
rebooting? (Version 5.3 RELEASE, i386)
Jay O'Brien
Rio Linda, California, USA
Follow my advice then..
about kernel debugging?!
Kris
--
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
You can do a shutdown now to get to single user mode, then execute an exit
which will boot back into multi-user mode. All rc scripts will be
re-initilized and you won't have to reboot the entire system (be sure to
only do this on the console obviously)...
.
Matt L
I learned that in order to make
1 - 100 of 107 matches
Mail list logo
