Hi,
There are few steps I may suggest to you:
1. Update CVS, i.e. use cvsup -L 2 -g
2. cd /usr/ports make fetchindex
3. portsdb -fr pkgdb -Ffv
4. portupdate -v -i -a -y
If the same problem still exists there is a not so clean step to make:
1. cd multimedia/ffmpeg
2. FORCE_PKG_REGISTER=yes
On Tue, Jul 07, 2009 at 11:06:12AM -0500, Kevin Kinsey typed:
Jos Chrispijn wrote:
Ruben de Groot wrote:
On Tue, Jul 07, 2009 at 11:27:53AM +0200, Jos Chrispijn typed:
- use truss on the server process
Thanks for your reply; can you explain what you mean with this?
Jos Chrispijn
i am not able to install gnome on freeBSD7.2
i try
pkg_add -r gnome-desktop
and
cd /usr/ports/x11/gnome-desktop/
make install clean
and i also change the /etc/rc.conf gnome_enable=YES.
ERROR MESSAGE:
ftp: unable to get
Hi,
it seems that there is no Internet connection for the machine.
Gnome should be on the installation CD. Mount the CD and install
it from there.
Check the handbook for information of how to configure the
network.
Erich
On 08 July 2009 pm 14:46:42 malathi selvaraj wrote:
i am not able to
On Tue, Jul 07, 2009 at 03:54:23PM -0500, Adam Vande More typed:
On Tue, Jul 7, 2009 at 7:17 AM, RIck van der Zwet rvdz...@transip.nlwrote:
d) drbd: http://www.drbd.org/ - Does anyone has a working (alternative)
setup on FreeBSD?
Any other solution/setup I am missing? Using external
I recently built a new system, and it has a SATA DVD drive in it. Everything
appeared to be working
at first, but I have run into some issues reading/playing encrypted DVDs as
well as burncd.
Here's some dmseg output:
kldload atapicam:
(probe0:ata5:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
Hi Rick,
On Tue, Jul 07, 2009 at 02:17:46PM +0200, RIck van der Zwet typed:
I been (re)searching and reading what the options are with regards to
H(igh) A(vailablility) file storage using FreeBSD, but cannot yet find a
proper working solution. Any advice welcome!
I've sought for proper
On Wed, Jul 8, 2009 at 2:06 AM, Ruben de Groot mai...@bzerk.org wrote:
On Tue, Jul 07, 2009 at 03:54:23PM -0500, Adam Vande More typed:
On Tue, Jul 7, 2009 at 7:17 AM, RIck van der Zwet rvdz...@transip.nl
wrote:
d) drbd: http://www.drbd.org/ - Does anyone has a working
(alternative)
-Original Message-
From: Peter [mailto:peterp...@aboutsupport.com]
Sent: 08 July 2009 05:25
Cc: freebsd-questions@freebsd.org
Subject: Re: VLC server
Graeme Dargie wrote:
Hello List.
Hi,
try upgrading the ports tree.
Peter
___
b. f. wrote:
But I have seen portupgrade something and then a subsequent run
shows this port as being 'newer' than the version it's supposed to be.
I've
[snip]
also noticed a few times it seemed like it was upgrading the same
version(s) over again. I just chalked this up to the ports system
Graeme Dargie wrote:
I did that before I started the install.
Regards
Graeme
As a workaround, try to compile ffmpeg first.
Make make config for ffmpeg and make sure libamr is NOT enabled.
It is a workaround but should do the job.
Peter
* Brad Mettee bmet...@pchotshots.com [2009-07-08]:
What happens if you put the drive on a secondary controller? (Maybe use the
CD-ROM drive cable)
OK, I tried it.
With the drive on a separate cable, you should be able to avoid any
problems that cable select or jumpers may be causing.
It's
Hello,
yesterday, having to install kdeadmin, I issued the following command
portupgrade -vnyNb -l file kdeadmin-3.5.10
Noting that n is negated by y (my mistake), the result of this command was
+ print/cups-base
+ print/xdvik
+ print/cm-super
+
On Thu, 2 Jul 2009 16:42:45 -0500
Sam Fourman Jr. sfour...@gmail.com wrote:
On Sun, Sep 7, 2008 at 6:36 AM, Norberto Meijomefree...@meijome.net wrote:
On Sat, 6 Sep 2008 20:27:10 -0500
Sam Fourman Jr. sfour...@gmail.com wrote:
I am also interested in using FreeBSD as the host in some
Hi,
The missing switch is the -R parameter of portupdate.
I.e. portupgrade -vnyNbR
Regards,
Ivailo Tanusheff
Deputy Head of IT Department
ProCredit Bank (Bulgaria) AD
dan mesli...@yahoo.fr
Sent by: owner-freebsd-questi...@freebsd.org
08.07.2009 14:05
Please respond to
mesli...@yahoo.fr
ch...@darkadsl.ca wrote:
I run a virtual hosting server and one of my clients got hacked (weak
password in CMS).
I was able to capture the php script that the hacker uploaded, as well as
some c and perl daemons (one looks to be basically like telnet -- should be
fairly harmless due to
Hi All:
I was wondering if anyone could point me toward any docs, or even better,
how-tos on setting up Xorg using dual head video?
Thanks,
IHN,
Gene
--
To everything there is a season,
And a time to every purpose under heaven.
___
On Wed, Jul 8, 2009 at 7:16 AM, Genef...@brightstar.bomgardner.net wrote:
Hi All:
I was wondering if anyone could point me toward any docs, or even better,
how-tos on setting up Xorg using dual head video?
I use xrandr(1). Below is my xorg.conf.
HTH.
1 Section ServerLayout
2
THat's the point !
isnt that -R implied by -N ?
From the portupgrade man page
[...]
-N
--new
Install a new port/package when a specified package is not installed.
Prior
to the installation a new port/package, all the required packages are
upgraded.
If this
Hi folks:
(1) I'm only used Wireshark and Ethereal to inspect network traffic,
and I've only used these on several occasion. Would someone suggest
FreeBSD alternatives (console or xserver based?
(2) I'm testing my connection to a remote server. The connection is
supposed to be encrypted.
On FBSD 8.0-current ia64 I've gmirror on 63GB partition, which
takes quite a long time to rebuild, perhaps 30 min. Is it
safe to reboot, or write to this filesystem, while it is
being rebuilt (gmirror status DEGRADED) ?
many thanks
--
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Anton Shterenlikht wrote:
On FBSD 8.0-current ia64 I've gmirror on 63GB partition, which
takes quite a long time to rebuild, perhaps 30 min. Is it
safe to reboot, or write to this filesystem, while it is
being rebuilt (gmirror status DEGRADED) ?
Doesn't matter which version it is; gmirror
In response to Anton Shterenlikht me...@bristol.ac.uk:
On FBSD 8.0-current ia64 I've gmirror on 63GB partition, which
takes quite a long time to rebuild, perhaps 30 min. Is it
safe to reboot, or write to this filesystem, while it is
being rebuilt (gmirror status DEGRADED) ?
Yes. Doing so
Daniel Underwood wrote:
Hi folks:
(1) I'm only used Wireshark and Ethereal to inspect network traffic,
and I've only used these on several occasion. Would someone suggest
FreeBSD alternatives (console or xserver based?
tcpdump(1). It can save to a pcap file for later review within
ch...@darkadsl.ca ch...@darkadsl.ca writes:
I run a virtual hosting server and one of my clients got hacked (weak
password in CMS).
Since you know the machine was hacked, you can't trust *anything* on the
machine. If possible, you should rebuild it. If a jail was hacked,
replacing that jail
Daniel Underwood wrote:
Hi folks:
(1) I'm only used Wireshark and Ethereal to inspect network traffic,
and I've only used these on several occasion. Would someone suggest
FreeBSD alternatives (console or xserver based?
wireshark, formerly known as ethereal works just fine on FreeBSD. If you
Thanks for the help.
I couldn't find any flags/fields in TCP packets indicated whether
encrypted (as in the case of SSH packets). There isn't any, right?
___
freebsd-questions@freebsd.org mailing list
What port of wine should I download in order to play 32bit .exe
files on FreeBSD-7.0 amd64? Linux wine or Wine?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Daniel Underwood wrote:
Thanks for the help.
I couldn't find any flags/fields in TCP packets indicated whether
encrypted (as in the case of SSH packets). There isn't any, right?
No. TCP (Transport Layer) knows nothing about encryption/encoding, and
hence there is no room (or need) within
Hi
Is it possible to create a symlink to a device and use the symlink in place
of the real device name in FreeBSD, especially in version 7.2?
1. A disk
/dev/camera - /dev/da0s1
2. A network device
re0 - lan0
Kind regards
Sagara
___
--On Wednesday, July 08, 2009 07:16:02 -0500 Gene
f...@brightstar.bomgardner.net wrote:
Hi All:
I was wondering if anyone could point me toward any docs, or even better,
how-tos on setting up Xorg using dual head video?
First make sure Xorg is up to date.
Second make sure that hald and
Is it possible to create a symlink to a device and use the symlink in place
of the real device name in FreeBSD, especially in version 7.2?
1. A disk
/dev/camera - /dev/da0s1
devfs.conf(5)
2. A network device
re0 - lan0
same as above, but there is way to completly hide re0:
#
Daniel Underwood wrote:
Thanks for the help.
I couldn't find any flags/fields in TCP packets indicated whether
encrypted (as in the case of SSH packets). There isn't any, right?
Correct: there isn't anything like that in the TCP headers. Encryption
on TCP streams is an application level
I have several users who are requesting new mail user accounts and
changes to email accounts all the time. I wonder if there is a package
that allows a given virtual domain owner to change their email accounts -
add, delete and change passwords etc - I am presently using sendmail.
On Wed, Jul 08, 2009 at 05:49:24PM +, Paul B. Mahol wrote:
Is it possible to create a symlink to a device and use the symlink in place
of the real device name in FreeBSD, especially in version 7.2?
1. A disk
/dev/camera - /dev/da0s1
devfs.conf(5)
Geneally, yes. But not in
uname -a
FreeBSD xxx 7.1-RELEASE FreeBSD 7.1-RELEASE #0
kldstat
Id Refs AddressSize Name
15 0xc040 97f830 kernel
21 0xc0d8 ff18 iscsi_initiator.ko
31 0xc0d9 6a2c4acpi.ko
iscontrol doesn't have -V version and strings doesn't find anything that looks
On Wed, Jul 08, 2009 at 02:50:17PM +0200, dan wrote:
THat's the point !
isnt that -R implied by -N ?
From the portupgrade man page
[...]
-N
--new
Install a new port/package when a specified package is not installed.
Prior
to the installation a new port/package, all
-Original Message-
From: Peter [mailto:peterp...@aboutsupport.com]
Sent: 08 July 2009 09:07
To: freebsd-questions@freebsd.org
Subject: Re: VLC server
Graeme Dargie wrote:
I did that before I started the install.
Regards
Graeme
As a workaround, try to compile ffmpeg first.
On Thu, 9 Jul 2009 08:00:28 +1200
Jonathan Chen j...@chen.org.nz wrote:
On Wed, Jul 08, 2009 at 02:50:17PM +0200, dan wrote:
THat's the point !
isnt that -R implied by -N ?
From the portupgrade man page
[...]
-N
--new
Install a new port/package when a specified
On Wed, 08 Jul 2009 07:33:42 -0500, Sagara Wijetunga sag...@tomahawk.com.sg
wrote:
Hi
Is it possible to create a symlink to a device and use the symlink in place
of the real device name in FreeBSD, especially in version 7.2?
1. A disk
/dev/camera - /dev/da0s1
2. A network
b. f. wrote:
On 7/6/09, manish jain invalid.poin...@gmail.com wrote:
2009/7/6 b. f. bf1...@googlemail.com
After running pkgdb -F, I find that there hundreds of ports depending on
python2.5.
Most of these are probably indirectly dependent, and may not be
seriously affected.
thanks a bunch for all the great info.
alex
Paul B. Mahol schrieb am 2009-07-03:
On 7/3/09, Alexander Best alexbes...@math.uni-muenster.de wrote:
wow. thanks a bunch. this new feature of having each app use it's
own volume
setting is pretty cool. however i think i'd like to preserve the
On Wed, Jul 08, 2009 at 10:20:41PM +0100, RW wrote:
On Thu, 9 Jul 2009 08:00:28 +1200
Jonathan Chen j...@chen.org.nz wrote:
On Wed, Jul 08, 2009 at 02:50:17PM +0200, dan wrote:
THat's the point !
isnt that -R implied by -N ?
From the portupgrade man page
[...]
On Wed, 8 Jul 2009 21:45:48 +0200
Roland Smith rsm...@xs4all.nl wrote:
On Wed, Jul 08, 2009 at 05:49:24PM +, Paul B. Mahol wrote:
Is it possible to create a symlink to a device and use the
symlink in place of the real device name in FreeBSD, especially
in version 7.2?
1. A
On 7/8/2009 8:15 PM, David Banning wrote:
I have several users who are requesting new mail user accounts and
changes to email accounts all the time. I wonder if there is a package
that allows a given virtual domain owner to change their email accounts -
add, delete and change passwords etc - I
45 matches
Mail list logo
