Dear all,
As a potential user of FreeBsd, I would like to install FreeBsd along
with Debian testing. I did a googling on how to install both on the same
machine, however I also would like to make a post here, in case some
better, easier to follow sites might be provided.
As far as I can
On Thu, 5 Aug 2010 18:58:00 -0600
Chad Perrin per...@apotheon.com wrote:
As I understand it, most man pages and other FreeBSD documentation is
distributed under the terms of the FreeBSD Documentation License:
I wonder if we should be trying to update the copyright notice in the
man pages
I use Icewm, so don't want to install all that kde/gnome
libs/dependencies and such to get konsole or gnome-console (but both are
nice)
xterm does display some things correctly (like sysinstall type command
line GUIs).
eterm is nice, but again, requires a ton of libs and looks funny on
Dear all,
As a potential user of FreeBsd, I would like to install FreeBsd along
with Debian testing. I did a googling on how to install both on the same
machine, however I also would like to make a post here, in case some
better, easier to follow sites might be provided.
As far as I can
As far as I can read from the installation manual, FreeBsd's
partitioning scheme is different than linux, this is the 1st
difference I know for now. I would appreciate if you could direct me
to web pages(if any) where these differences are pointed out.
Consult the HANDBOOK[1]
Crashcourse for
On 06/08/2010 05:00, Anton Shibu wrote:
Installed SAP in my lab top two years before from bangalore private
institute . After a long time , trying to start it .It is not working. Is
there any settings , i to update ..Any body can help me ...?
Unfortunately we aren't mind-readers; nor do we
On Fri, Aug 06, 2010 at 03:12:11AM -0500, Depo Catcher wrote:
I use Icewm, so don't want to install all that kde/gnome
libs/dependencies and such to get konsole or gnome-console (but both are
nice)
xterm does display some things correctly (like sysinstall type command
line GUIs).
Try
Hi
I'd like to add you to my professional network on Swom. You can use Swom to
connect with new contacts and promote your existing businesses. Swom even has
an affiliate program that pays you.
- Mike
p.s. Here is the link:br
http://swom.com/r/114201-mike-genkin
--
This e-mail was sent on
If you already have Debian installed, with GRUB on MBR and you have a free
primary partition lying around then you can install FreeBSD normally using
the free primary partition as your BSD slice and making BSD partitions over
it.
When FreeBSD ask you about Bootloader chose to leave the MBR
On 08/06/2010 12:48 PM, me wrote:
and you have a free primary partition lying around then you can
install FreeBSD normally using the free primary partition as your BSD
slice and making BSD partitions over it.
When FreeBSD ask you about Bootloader chose to leave the MBR untouched.
Once FreeBSD
El día Friday, August 06, 2010 a las 11:26:10AM +0200, Roland Smith escribió:
On Fri, Aug 06, 2010 at 03:12:11AM -0500, Depo Catcher wrote:
I use Icewm, so don't want to install all that kde/gnome
libs/dependencies and such to get konsole or gnome-console (but both are
nice)
Hello
I have a concern with the deployment of FreeBSD 8.1.
I usually compile on a server and deploy the result by NFS.
It works fine with FreeBSD 6 and 7, but curiously,
I just can not get the same result with FreeBSD 8.1 (or with 8.0).
Here is the df of the source:
Filesystem 1K-blocks Used
On Fri, Aug 06, 2010 at 03:06:37PM +0200, thc wrote:
Hello
I have a concern with the deployment of FreeBSD 8.1.
I usually compile on a server and deploy the result by NFS.
It works fine with FreeBSD 6 and 7, but curiously,
I just can not get the same result with FreeBSD 8.1 (or with 8.0).
Hello fellas,
I have a 8.0-release system with 1 gigabit LAN and 1x 100Mb lan card. They
are working fine until I add a second gigabit lancard. After I insert the
second one, the first gigabit lan card drops to 100Mb. If I remove the
second one, the first one goes back to gigabit. The network
Quoth Adam Vande More on Thursday, 05 August 2010:
On Thu, Aug 5, 2010 at 11:17 PM, kalin m ka...@el.net wrote:
awesome... i will. i'm basically intending to use it for production
servers. i'll give it try...
was reading something about not supporting usb... how about serial
In the /usr/ports/dns/bind9 ports there is a bind97 port
that I had no trouble at all installing on a 8.0 system. If I do
a pkg_add -r bind97, however, pkg_add reports that it is
unavailable. I will be building several FreeBSD boxes with
bind9.7.1 on them so a package would be faster. Am
Or, do you have idea how to completely reinstall munin? :-)
Subject: monitoring
Hi,
What program do you use monitoring your system?
I used munin but after upgrading to 1.4 it stops working properly, I tried to
fix bout with no success.
Any idea?
thank you!
Laszlo
Quoth Roland Smith on Friday, 06 August 2010:
On Fri, Aug 06, 2010 at 03:12:11AM -0500, Depo Catcher wrote:
I use Icewm, so don't want to install all that kde/gnome
libs/dependencies and such to get konsole or gnome-console (but both are
nice)
xterm does display some things
Hi,
What program do you use monitoring your system?
I used munin but after upgrading to 1.4 it stops working properly, I tried to
fix bout with no success.
Any idea?
thank you!
Laszlo
___
freebsd-questions@freebsd.org mailing list
Chip Camden sterl...@camdensoftware.com writes:
Quoth Roland Smith on Friday, 06 August 2010:
On Fri, Aug 06, 2010 at 03:12:11AM -0500, Depo Catcher wrote:
I use Icewm, so don't want to install all that kde/gnome
libs/dependencies and such to get konsole or gnome-console (but both are
On Fri, Aug 06, 2010 at 10:15:15AM -0500, Martin McCormick wrote:
In the /usr/ports/dns/bind9 ports there is a bind97 port
that I had no trouble at all installing on a 8.0 system. If I do
a pkg_add -r bind97, however, pkg_add reports that it is
unavailable. I will be building several
On 06/08/2010 16:15, Martin McCormick wrote:
In the /usr/ports/dns/bind9 ports there is a bind97 port
that I had no trouble at all installing on a 8.0 system. If I do
a pkg_add -r bind97, however, pkg_add reports that it is
unavailable. I will be building several FreeBSD boxes with
Very powerfull, indeed
too bad vrdp doesn't work on OSE...
Samuel Martín Moro
{EPITECH.} tek4
CamTrace S.A.S
(+033) 1 41 38 37 60
1 Allée de la Venelle
92150 Suresnes
FRANCE
Nobody wants to say how this works.
Maybe nobody knows ...
Xorg.conf(5)
On Fri, Aug 6,
On Tue, 03 Aug 2010 11:37:03 +0800 at
Jason lisen1...@gmail.com wrote:
hi,all:
which one is the memory size?And what's the meaning of these three variable?
hw.physmem: 2138476544
hw.usermem: 1886236672
hw.realmem: 2147430400
___
Redirected to the -questions.
Paul eb30...@gmail.com wrote:
What about matching the ' marks in this section? I get a command error.
# XXX: put extraction in its own function
MAGIC_NUMBER=`od -An -t u4 -N 4 -j $MAGIC_OFFSET $file | tr -d ' '`
That command works fine for me:
$
On Friday 06 August 2010 18:48:30 Daniel C. Dowse wrote:
On Tue, 03 Aug 2010 11:37:03 +0800 at
Jason lisen1...@gmail.com wrote:
hi,all:
which one is the memory size?And what's the meaning of these three
variable?
hw.physmem: 2138476544
hw.usermem: 1886236672
hw.realmem: 2147430400
On Fri, Aug 06, 2010 at 11:26:10AM +0200, Roland Smith wrote:
On Fri, Aug 06, 2010 at 03:12:11AM -0500, Depo Catcher wrote:
I use Icewm, so don't want to install all that kde/gnome
libs/dependencies and such to get konsole or gnome-console (but both are
nice)
xterm does display
Oliver,
Thanks for the reply. I am attaching the bash output from the shell
script. This script implements RPMs so I am sure that I need the linux
module. I had previously found a guide on how to install RPMs on FreeBSD.
I have a printer that has an RPM that allows it to work on Linus. So I
Oliver,
Looks like the Linux emulator is only 32 bit. Here is the error I get after
installing the emulator and running the /usr/compat/linux/bin/bash shell.
This is a x64 bundle and does not match that of the current
architecture. Please download the x86 bundle.
I would like to see if I can
I'm running FreeBSD 7.2 (FreeBSD janet.weif.net 7.2-RELEASE FreeBSD
7.2-RELEASE #1: Sat Oct 31 16:21:25 MDT 2009
ch...@janet.weif.net:/usr/src/sys/i386/compile/JANET i386) with
netatalk installed so I can connect my old Macintosh Quadra 605 to the
FreeBSD machine to share files.
I would like to
Hi,
Has anyone tried to use nss_ldap and nscd with perform-actual-lookups in
nscd.conf? My problem is that when I try to getent passwd or getent group
it seems like ldap query is not made and getent does not return ldap
users. Without nscd cache in nsswitch.conf or disabling
I just pulled mercurial, and the build nowfails:
for f in bash_completion convert-repo dumprevlog hg-ssh hgdiff hgk
logo-droplets.svg memory.py mercurial.el mergetools.hgrc mq.el
perf.py pylintrc python-hook-examples.py rewrite-log sample.hgrc
shrink-revlog.py simplemerge
On Fri, Aug 6, 2010 at 9:19 AM, Samuel Martín Moro faus...@gmail.com wrote:
Very powerfull, indeed
too bad vrdp doesn't work on OSE...
True, but a VNC server was recently added to the OSE edition instead:
http://www.virtualbox.org/ticket/6020
-Noah
On 8/2/10, Manolis Kiagias son...@otenet.gr wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hey all,
I have just completed the first 8.1-RELEASE based build of the 'Custom
releases' project hosted here:
http://freebsd-custom.wikidot.com
At the moment only the 64bit version is
34 matches
Mail list logo
