So, clearly dd'ing the drive to another drive won't work.
How can I replicate the boot block and partition table from my
existing drive onto a new one in freebsd?
In solaris, I'd use prtvtoc | fmthard, then dd...
Thanks :)
-Charlie
___
I have used dd to image a drive many times before in freebsd. It works
like a champion and will boot up just fine. I may have misunderstood
your mail but if not then it will work.
Well, maybe my weird over ssh calling a setuid program that calls a
script dd was flawed somehow. I'll do it
On 1/25/2005 8:46 PM, SigmaX wrote:
Used to happent o me all the time w/ Windows 2000. That's the reason I
switched to FreeBSD ;-) (e pluribus unim).
Cheerio,
SigmaX
And windows is normally more tolerant of flaky hardware/power. Heh.
:)
-Charlie
Lady Amalara wrote:
My Question is...how can I block my IP address so others won't see
it???
___
The only way is to stop using 205.206.1.11 to connect to anything.
Really, you can't hide.. else nothing will work.
The only way is to not use the Internet.
i.e. you don't
Mervin McDougall wrote:
Ummm what do you suggest that I do to get it connected
to the proxy server?
Well obviously you'll need an IP address first.
Remember the ifconfig you pasted? The netstat -rn? You have no IP address
assigned to an interface.
Try reading
James Kilton wrote:
Hello,
We've installed some FreeBSD machines as Gigabit sniffers, and I'm
wondering if there are any things I can tweak (e.g., buffer size) to help
TCPDUMP capture better (we often see packets dropped by the kernel).
Any advice would be appreciated.
This:
sysctl
Alan Curtis wrote:
553 You are not authorized to send mail as [EMAIL PROTECTED]
501 5.6.0 Data format error
So [EMAIL PROTECTED] and [EMAIL PROTECTED] can send mail
to the list but not [EMAIL PROTECTED].
Any suggestions on how to fix this?
Sounds like your ISP published SPF records, and sites
Brian Henning wrote:
Greetings All:
Is it possible to add a line above that name server entries in the
resolv.conf file that will tell the system to check the hosts file for
a resolution before querying the dns server(s)?
Thanks,
Depending on your version of freebsd, nsswitch.conf will have:
UPDATING does mention libmap.conf... adding the suggested values was
required once I got gaim rebuilt.
So *shrug* nevermind I guess :)
-Charlie
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
So... lots of things are crashing since updating to 5.3, and a google
search revealed something about malloc() debugging options.
UPDATING mentions no such thing. :(
The 5.3 release notes mention it, however.
Crashing apps:
fluxbox: recompiled boxtools and fluxbox. Worked.
gaim: tried to
Rob wrote:
Hi,
By accident I happen to come across this remarkable limit of
uptime registration for FreeBSD systems. After 497 days, the
timer jumps to zero again.
Not here..
8:00AM up 1074 days, 11:58, 0 users, load averages: 0.57, 0.26, 0.10
That's on 2.1.0-RELEASE, BTW :)
-Charlie
On my laptop, I have one hard drive.
Slice 4 holds my FreeBSD partition.
I used the defaults during the install of 5.2, so /boot lives on slice
4, part a.
I have Grub configured as such:
root(hd0,3,a)
kernel /boot/loader
Upon boot attempt, I see:
Filesystem type unknown, partition type 0xa5
Charlie Schluting wrote:
root(hd0,3,a)
kernel /boot/loader
Upon boot attempt, I see:
Filesystem type unknown, partition type 0xa5
Error 17: Cannot mount selected partition.
OOPS! Ignore that question... I see someone was asking the same thing :)
Someone replied:
And it will load the MBR from
to install the fbsd boot
manager to the boot sector of this partition, but it seems it is done by
default.
Removing 'kernel /boot/loader' and adding 'chainloader +1' (instead of
keeping both, like some docs suggest) worked perfectly.
Thanks Joe!
Charlie Schluting wrote:
root(hd0,3,a)
kernel
Mr Kitt wrote:
To whom it may concern,
pls provide me the cmds as well... u may give me an example so that i can learn faster n understand better...
Nobody is going to give you commands for basic things. It would just
take too long. Read the manual.
It sounds like you're wanting to set up
I'm a moron. I didn't follow the directions.
I did:
make buildworld; make buildkernel; make installkernel; make installworld.
Note: there was no booting into single user mode :(
The installworld failed 1/2 was through..
I rebooted into single user mode, tried to re-run installworld. It
Please help if you can. I am not the only one with this problem,
I wonder if others have given up and gone back to versions
4.X...
Thank you all,
Roy
I wish there was a solution to this.. I've search for many moons.
My problem is that I can't upgrade my firewall, because I have bad RAM.
Make
Kenneth W Cochran wrote:
Hello:
I get messages like the following in my syslog all the time:
Jan 20 09:00:40 kern.info localhost /kernel: Connection attempt to
UDP 192.168.0.1:1990 from 192.168.0.1:53
Jan 20 09:02:48 kern.info localhost /kernel: Connection attempt to
UDP 192.168.0.1:2052 from
Gautam Gopalakrishnan wrote:
udp:53 is DNS. Maybe your apps are looking a named on your machine...
Just my newbie guess.
Gautam
Actually, its named looking to connect to a port that is no longer
listening for it to respond there...
___
[EMAIL
Hi,
Trying to configure sasl with postfix.. and I keep getting Login
Failed
Here's what I have:
telnet localhost 25:
AUTH PLAIN Y2hhcm...
535 Error: authentication failed
The maillog simply shows:
warning: localhost[127.0.0.1]: SASL PLAIN authentication failed
/etc/rc.conf:
On Wed, 24 Sep 2003, Jez Hancock wrote:
On Tue, Sep 23, 2003 at 05:32:33PM -0700, Charlie Schluting wrote:
Hi,
Trying to configure sasl with postfix.. and I keep getting Login
Failed
Run test utility:
./testsaslauthd -u igor -p secret
0: OK Success.
If you get output other
FBSD 5.1:
Using Bind9.2.2, and I have query logging turned on:
logging {
channel querylog { file /var/log/query.lo~g; print-time yes; };
category queries { querylog; };
};
After a logrotate, it stops logging completely. The permissions are
correct, and all I have to do to make it start
On Mon, 8 Sep 2003, John Ekins wrote:
Hello Charlie,
On Mon, 8 Sep 2003 12:04 , Charlie Schluting [EMAIL PROTECTED] sent:
After a logrotate, it stops logging completely. The permissions are
Yes, I meant after a run of newsyslog.
You could use the built in log rotation in Bind. Change
On Mon, 18 Aug 2003, geek wrote:
i read it already, but i have a problem with it
#
# Allow bootp traffic in from your ISP's DHCP server only.
#
pass in quick on
On Tue, 19 Aug 2003 [EMAIL PROTECTED] wrote:
I tried to install webmin by the instructions and ended up with a no-go on
it.
Would you be so kind as to walk through, step by step, installing a tar.gz?
converted it into a tar easy enough but this is where the instructions break
down, I
Nothing is mentioned in /var/log/messages. The switch claims the port is
running at 100Mbits, full-duplex, as does the output of
ifconfig. Suggestions?
- Mike Hogsett
Does ifconfig show any errors? Does the switch show any errors?
That's where I'd start..
--Charlie
this scriipt?
Dan
Charlie Schluting wrote:
On Mon, Aug 04, 2003 at 10:34:20PM -0700, dt wrote:
Is there any standard (or non) FreeBSD tool that is used to measure a
current network throughput/bandwidth? And also, what are the
requirements to do so, and do I need to be root to run, or do
http://www.google.com/search?q=pop+before+smtp+sendmail
On Fri, 8 Aug 2003, FreeBSD wrote:
Does anyone have any URL's for POP Before SMTP setup for sendmail? I'm on Fbsd4.8
with the current Sendmail 8.12.8. I havent used pop and smtp on my server in 4
years now so none of my old
ssia, I can't run watch since adding more restrictive firewall rules. I
don't see how that would stop watch from working..
I don't have a snp0 device..but I'm running 5.0 so I can't run MAKEDEV.
I'm a bit confused about devfs and how it makes devices. In my
searches, making the device seems to
On Mon, Aug 04, 2003 at 10:34:20PM -0700, dt wrote:
Is there any standard (or non) FreeBSD tool that is used to measure a
current network throughput/bandwidth? And also, what are the
requirements to do so, and do I need to be root to run, or do I need to
load a special kernel module?
This is what I get from: systat if 1
/0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10
Load Average |
/0 /10 /20 /30 /40 /50 /60 /70 /80 /90 /100
idle X
root idle: cpu0
root idle:
You sent email to: [EMAIL PROTECTED]
On Wed, 6 Aug 2003, Anil Garg wrote:
hi,
On red hat ..commands 'adduser' and '/stand/sysinstall' doesnt work.
Can someone help me by telling how to add user and group in redhat.
No. Point and click ... point and click
Thanks and Regards
Anil.
On Mon, 28 Jul 2003, marlon corleone wrote:
how do i boot graphically in fluxbox?
im booting up fluxbox in startx method, if i want to
boot it in graphical mode, should i COMMENT this
entry:
exec /usr/X11R6/bin/fluxbox in my .xinitrc and put
the entry in .xsession, is that all i have to
On Mon, 28 Jul 2003, marlon corleone wrote:
startx wont load anymore running it as root. the
problem started when i got a improper shutdown, and
when i reboot
i saw this error message dmesg /var /usr was not
properly dismounted, so what i did, is boot in single
user and do a fsck then when
Your comment is insulting, unfair, hostile to encouraging the spread
of BSD, and hostile to those who both happen to be Christian and
need to use BSD.
(note: I am atheist, and would say the same if you had labeled any
religion - Muslim, Hindi, Marxism, etc, as stupid. )
Please
On Sun, Jul 27, 2003 at 08:52:39AM -0400, DJ Landreneau wrote:
I am running 5.0 that came with FreeBSD Unleashed by Sams.
Can you point me into the correct direction for enabling kernel support for
psm0?
Read the chapter in the handbook about kernel configuration, and take
it
Hi,
I have a fbsd box that runs its own firewall.. and tonight I learned my
lesson about trying to configure it remotely :)
Anyways, I'm trying to find some better documentation. The manpage says
nothing about what options it can take in this example:
00903 allow igmp from any to any
00904
On Fri, 25 Jul 2003, Roger 'Rocky' Vetterberg wrote:
Rissland, Thorsten wrote:
...i'm a christian.
I hope this helps, freebsd is really a great operating system and I hope
you wont let religion or politics stop you from using it.
I thought this was a joke the first time I read it..
william nova wrote:
I was using Apache 2 on Windows 2003 server.
I had 2 virtual hosts running, using no-ip for DNS resolution along with a
NO-IP referral entry for each (since my ISP blocks port 80)
The virtual hosts config portion of httpd.conf looked like:
NameVirtualHost *
VirtualHost *
michael Corleone wrote:
hi i received this error when im about to do a buildworld after upgrading my src and ports collection.
im running 4.8-RELEASE, heres the logs of the errors:
i hope anyone can explain what and where is the the line that causes the error, thanks all.
=== bin/ln
=== bin/ls
Rik Scarborough wrote:
I'm having a problem with KDE's VNC server under FreeBSD.
I can connect to one machine that is running KDE and set to allow
uninvited guests, but when I disconnect from that machine the VNC server
(krfb) crashes with the following message.
The Application unknown (krfb)
Ok, I must be doing something wrong. This is my firewall box (5.0) and
it has the calcru negative time of blah for pid blah issue. So, I
decided to rebuild the world. Here's what I did:
rm -rf /usr/src/*
cvsup'd with this:
*default release=cvs tag=RELENG_5_0
src-all
The first time, I did make
On Sun, 22 Jun 2003, Kris Kennaway wrote:
On Sun, Jun 22, 2003 at 02:15:46PM -0700, Charlie Schluting wrote:
Other info:
AMD K6-2 450MHz, 192MB.
Current install: 5.0-RELEASE-p7
This is likely to be a hardware issue. AMD k6's are very sensitive to
temperature and require lots of CPU
Kent Stewart wrote:
It doesn't matter. My rule is that if you are the only one with problems, it
is your computer that has the problem. There haven't been a number of
complaints of buildworld failures in -current, which is where they would be
if 5.x was failing.
In the past, IIRC, many of the
On Sat, 21 Jun 2003, Paige King wrote:
forgot my login and password. what do I do to bypass the login.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD 4.7 firewall with 3 nics. Public, DMZ, and LAN.
DNS,Bind is not running here.
www Public address is redirected to it's DMZ address.
The www server in the DMZ can be accessed by name from the Internet but
only by it's private DMZ IP address from the LAN side. Attempt to access
it by
I was wondering if anyone could help:
I'm using 5.0, and I just updated src-base and src-all with cvs.
The make command fails when it starts linking everything together.. and it
stopped in the same place before I did a make buildworld. Whether
I delete the src tree and start over, or I just try
:
On Sunday 23 March 2003 02:16 pm, Charlie Schluting wrote:
I was wondering if anyone could help:
I'm using 5.0, and I just updated src-base and src-all with cvs.
To what? If you're going to -current you need the read the appropriate
documentation. If you're refering to 5.0 Release, similiar
Thank you everyone :)
I started reading about how the tags work just before you sent that email
taxman :)
So, now I understand.
Thanks again.
-Charlie
On Sun, 23 Mar 2003, taxman wrote:
On Sunday 23 March 2003 02:31 pm, Charlie Schluting wrote:
Ah, sorry about that. In my cvsup file I said
49 matches
Mail list logo