Daniel Bye wrote:
On Fri, Sep 26, 2008 at 11:14:05PM +0100, Kemian Dang wrote:
Daniel Bye wrote:
On Fri, Sep 26, 2008 at 04:58:10PM +0100, Kemian Dang wrote:
Hi all,
I have a FreeBSD 7 Stable box with a nVidia 6150 Go Graphic Card.
Everything was OK sometime before, but after a series
Daniel Molina Wegener wrote:
On Sunday 28 September 2008 09:29:55 Daniel Bye wrote:
On Fri, Sep 26, 2008 at 11:14:05PM +0100, Kemian Dang wrote:
Daniel Bye wrote:
On Fri, Sep 26, 2008 at 04:58:10PM +0100, Kemian Dang
wrote:
Hi all,
I have a FreeBSD 7 Stable box with a nVidia 6150 Go
Hi all,
I have a FreeBSD 7 Stable box with a nVidia 6150 Go Graphic Card.
Everything was OK sometime before, but after a series updated on ports,
( I am not sure about the time, I have not use OpenGL stuff for long
time) running a program with OpenGL will cause the X crashed.
The only errors
Daniel Bye wrote:
On Fri, Sep 26, 2008 at 04:58:10PM +0100, Kemian Dang wrote:
Hi all,
I have a FreeBSD 7 Stable box with a nVidia 6150 Go Graphic Card.
Everything was OK sometime before, but after a series updated on ports,
( I am not sure about the time, I have not use OpenGL stuff for long
Achilleas Mantzios wrote:
Hi, i have had various crashes and segfaults in the last hot days (room temp
about 30 deg C).
I tried to monitor CPU temp with mbmon, which shows a very big value in COU
temperature:
[EMAIL PROTECTED]:~# mbmon -c 1
Temp.= 42.0, 201.0, 39.0; Rot.= 3245,0,0
2008/6/29 Patrick Lamaizière [EMAIL PROTECTED]:
Le Sun, 29 Jun 2008 12:42:33 +0100,
Kemian Dang [EMAIL PROTECTED] a écrit :
Hi all,
Hi,
I set sysctl debug.cpufreq.lowest=800 but sysctl -a still told me
that the CPU freq is at 300, though it will jump high if I am doing
some heavy work
Hi all,
I set sysctl debug.cpufreq.lowest=800 but sysctl -a still told me that
the CPU freq is at 300, though it will jump high if I am doing some
heavy work.
This reduce of performance makes me even have trouble on browsing website.
Did I miss something important?
12:29pm kemian ~ sudo
Thank you, I am trying 14 and 16 pix to find one suits me :)
2008/6/11 Frank Shute [EMAIL PROTECTED]:
On Wed, Jun 11, 2008 at 12:39:21PM +0100, Kemian Dang wrote:
2008/6/8 Frank Shute [EMAIL PROTECTED]:
On Sun, Jun 08, 2008 at 06:06:38PM +0100, Kemian Dang wrote:
2008/6/8 Frank Shute
2008/6/8 Frank Shute [EMAIL PROTECTED]:
On Sun, Jun 08, 2008 at 06:06:38PM +0100, Kemian Dang wrote:
2008/6/8 Frank Shute [EMAIL PROTECTED]:
On Sun, Jun 08, 2008 at 03:41:53PM +0100, Kemian Dang wrote:
Dear All,
I used to use Bitstream Vera Sans Mono in Gnome-terminal, by change
Dear All,
I used to use Bitstream Vera Sans Mono in Gnome-terminal, by change
the configure in the menu.
Now I am using aterm, but I also want to use that font.
I can see it by fc-list:
[3:39pm:kemian] ~ fc-list | grep Sans Mono
Bitstream Vera Sans Mono:style=Bold
Bitstream Vera Sans
2008/6/8 Frank Shute [EMAIL PROTECTED]:
On Sun, Jun 08, 2008 at 03:41:53PM +0100, Kemian Dang wrote:
Dear All,
I used to use Bitstream Vera Sans Mono in Gnome-terminal, by change
the configure in the menu.
Now I am using aterm, but I also want to use that font.
I can see it by fc-list
Hi Vince and Roland,
Thank you for the reply, but unfortunately, they did not work.
I closed the laptop, connected the monitor and restarted the laptop,
xrandr -q only gave the information of integrated monitor, no
external monitors' information and xrandr --auto did not give any
information.
I
.
2008/4/26 Eric Schuele [EMAIL PROTECTED]:
On 04/26/2008 04:29, Kemian Dang wrote:
Hi Vince and Roland,
Thank you for the reply, but unfortunately, they did not work.
I closed the laptop, connected the monitor and restarted the laptop,
xrandr -q only gave the information
Dear All,
I use a laptop with Freebsd 7.0 stable and Gnome 2.22, the graphic card is
integrated nvidia go 6150.
I want to use a external monitor to support my work, but I find it gave no
display when I plug the monitor, with the Fn + f4 key(this works in
winodws).
Seems no related topics in hand
Try stardict http://stardict.sourceforge.net/, it is a dictionary
engine and you can find Japanese dictionary at
http://stardict.sourceforge.net/Dictionaries_ja.php
Best wishes,
Kemian
On 21/04/2008, Niels Kobschaetzki [EMAIL PROTECTED] wrote:
Hi!
Anyone on the list that can tell me which
On 03/04/2008, Lowell Gilbert [EMAIL PROTECTED] wrote:
Don't top-post, please.
Kemian Dang [EMAIL PROTECTED] writes:
I want to write Java program, so I want to find which one should I
use, to avoid situation that my code can not be compiled and run on
another machine.
So it isn't
I want to write Java program, so I want to find which one should I
use, to avoid situation that my code can not be compiled and run on
another machine.
Best wishes,
Kemian
On 02/04/2008, Lowell Gilbert [EMAIL PROTECTED] wrote:
Kemian Dang [EMAIL PROTECTED] writes:
I am not sure which
Dear all,
I am not sure which version of jdk should I use, do they have the same
functionality?
I know jdk-1.6 is compiled by diablo-jdk and has no run dependency on
diablo, but if diablo is the same as the original sun jdk, why should
there be another one, or to say, why I need to install
I also use a HP laptop, This is the pciconf -lv output of my machine,
vendor = 'Broadcom Corporation'
device = 'BCM4310 broadcom wireless 1490 (dell)'
class = network
The strange thing is it said 1490 dell, so after the fail attempt on
the HP driver, I turn to Dell 1490
The freebsd-tips suggest:
ports/net/netcat port is useful not only for redirecting input/output
to TCP or UDP connections, but also for proxying them with inetd(8).
Best wishes,
Kemian
On 29/03/2008, Tuc at T-B-O-H.NET [EMAIL PROTECTED] wrote:
Hi,
Is there a quick/easy (cookbook?) way
Hi everyone,
I try to upgrade gnome2 using portupgrade, but it fails at gnome-panel.
It get undefined reference which can be seen at output below.
I use the lastest cvsup sorce.
Does anyone encounter the same thing?
Regards,
Kemian
clock_applet-clock.o(.text+0x2b9e): In function
Thank you for quick response, I really forget to see this useful file...
Best wishes,
Kemian
On 25/03/2008, Robert Huff [EMAIL PROTECTED] wrote:
See /usr/ports/UPDATING.
Robert Huff
___
Dear all,
I have a Compaq laptop running FB7 stable.
When I use battery, the system becomes very slow, there are even lag
of the cursor.
The load average would be 1 - 2, while the idle CPU is 99.0%.
It would not change even I plug the ac power later.
But if I reboot the machine whit ac power,
,
Olier
Kemian Dang [EMAIL PROTECTED] wrote:
Dear all,
I have a Compaq laptop running FB7 stable.
When I use battery, the system becomes very slow, there are even lag
of the cursor.
The load average would be 1 - 2, while the idle CPU is 99.0%.
It would not change even I plug
Hi,there:
A short story is:
When I boot my laptop, the screen tells me invalida partition and
then give me the prompt default: 0:ad(0,a)/boot/kernel/kernel.
My FreeBSD / partition is at /dev/ad4s3a, so I tried
4:ad(3,a)/boot/kernel/kernel, but without lucky.
Could someone tell me how should I
up
data, So I re install using the new burned CD...
Best whies,
Kemian
On 15/03/2008, Nikola Lečić [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: RIPEMD160
On Sat, 15 Mar 2008 11:26:52 +
Kemian Dang [EMAIL PROTECTED] wrote:
[...]
I can not remember whether I
I have reinstall the system, just done the gnome from ports...
On 15/03/2008, Nikola Lečić [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: RIPEMD160
On Sat, 15 Mar 2008 22:16:58 +
Kemian Dang [EMAIL PROTECTED] wrote:
Problem is the boot partition can not be found
configuration in /etc/make.conf?
Cheers,
Oliver
Kemian Dang [EMAIL PROTECTED] wrote:
Hi, all,
I have installed xpdf 3.02 on a FreeBSD 7.0 Release Box without
problem, I can use xpdf -h to get the help information, But when
ever I just use xpdf or xpdf some.pdf, it will give
Hi, all,
I have installed xpdf 3.02 on a FreeBSD 7.0 Release Box without
problem, I can use xpdf -h to get the help information, But when
ever I just use xpdf or xpdf some.pdf, it will give a
segmentation fault and without any other note.
Is there any one have met such things and please suggest
, Anton Shterenlikht [EMAIL PROTECTED] wrote:
On 19/02/2008, Anton Shterenlikht [EMAIL PROTECTED] wrote:
Is anybody using usr5410? With what driver? And what version of FBSD?
On Wed, Feb 20, 2008 at 12:21:22PM +, Kemian Dang wrote:
Try ndis, it works for my broadcom
Try ndis, it works for my broadcom wireless adapter.
Kemian
On 19/02/2008, Anton Shterenlikht [EMAIL PROTECTED] wrote:
I tried to contact the port maintainer, but haven't heard anything back.
I'd like to use US Robotics usr5410 wireless pcmcia card on my FBSD 6.3
laptop. I understand this
using acx100+111? What is the best way to install it?
Is anybody using usr5410? With what driver? And what version of FBSD?
Any other advice on getting usr5410 working on FBSD 6.3?
On Wed, Feb 20, 2008 at 12:21:22PM +, Kemian Dang wrote:
Try ndis, it works for my broadcom wireless
I can not get response from ifconfig ndis0 up scan, neither.
But as I know my wireless network's ssid, I just ifconfig ndis0 ssid
xxx, which make the status change to associate and dhclient ndis0
can get IP from dhcp.
Kemian
On 18/02/2008, DSA - JCR [EMAIL PROTECTED] wrote:
Hi all
Freebsd
You mean you are going to setup a ftp-server and got this problem?
Tell us which ftp server you are installing or which program you are using
Frank wrote:
I have set FTP to anonymous but i can't move it and delete, now how shold i
solve this problem.
#pw adduser ftp
#mkdir /home/ftp
#chown
Hi, there
I have a broadcom wireless card on laptop and want to use it.
I installed the driver with ndisgen and after reboot, everything
looks OK, ifconfig shows the ndis is working:
ndis0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
ether 00:1a:73:8e:79:d8
Bnw CmpRpr 写道:
Hi. I recently purchased a HDD from a man that runs a data center, and on this
HDD is FreeBSD. My problem is I want it off, and for some ungodly reason, it
keeps coming back. I cant format the drive with Windows, and I cant load it as
a slave to format, either. Any help would
Hi, there.
I am running FB7-rc1 on a HP/Compaq laptop. I find if I unplug the
power cable and let it use the battery, it will become slow, and
recover when plug in the power cable. But when I shutdown the
computer, it will halt on the first stage and can not be shutdown.
I think it maybe the ACPI
.
Kemian
On 02/02/2008, Mel [EMAIL PROTECTED] wrote:
On Saturday 02 February 2008 23:51:01 Kemian Dang wrote:
I am running FB7-rc1 on a HP/Compaq laptop. I find if I unplug the
power cable and let it use the battery, it will become slow, and
recover when plug in the power cable.
That's
Glen Barber 写道:
On Wednesday 30 January 2008 07:18:51 pm Kemian Dang wrote:
I have a laptop which using the broadcom wireless card.
I download the bcmwl5a.inf/.sys and use ndisgen to generate the .ko
file, then I kldload it as the doc said.
I can see ndis,if_ndis and bcmwl using kldstat
Sean Murphy 写道:
I have a FreeBSD 5.4 system and would like to migrate users in the
password file with UIDs 3000 through 5000 to a FreeBSD 6.3 system on a
running on a separate box. Is there a way to export just those users?
Thanks
___
Vince Hoffman 写道:
Kemian Dang wrote:
Glen Barber 写道:
On Wednesday 30 January 2008 07:18:51 pm Kemian Dang wrote:
I have a laptop which using the broadcom wireless card.
I download the bcmwl5a.inf/.sys and use ndisgen to generate the .ko
file, then I kldload it as the doc
Hi, everyone,
I have installed the FB7-rc1 and the nvidia driver from port and kept
update to the newest version, but when I change the xorg.conf to use the
nvidia instead of nv, the X gave a complain about no /dev/nvidiactl
and stops, so I can only use nv, which seems slow on some 3d
Hi,
It works, thanks a lot.
But, it seems the size of the font is larger than before, anyway the
main problem is not the font size:)
Best wishes,
Kemain
Baptiste Grenier 写道:
Le 30/01/08 à 13:32, Kemian Dang téléscripta :
Hi, everyone,
I have installed the FB7-rc1 and the nvidia driver
Hi, everyone,
I have a laptop which using the broadcom wireless card.
I download the bcmwl5a.inf/.sys and use ndisgen to generate the .ko
file, then I kldload it as the doc said.
I can see ndis,if_ndis and bcmwl using kldstat, but there are no ndis0
when ifconfig.
I have tried add the bcmwl
44 matches
Mail list logo
