I have an all-SCSI system with FreeBSD 6.3 on one disk and 7.0 on the
other. It booted using GRUB and worked OK.
I installed Mandriva Linux on the disk that had 7.0 on it (replacing 7.0)
The setup now is:
SCSI ID 15 73GB /dev/sda - running FreeBSD
SCSI ID 14 36GB /dev/sdb - Mandriva
The
On Thu, June 5, 2008 00:24, Jonathan Chen wrote:
In my personal opinion, the small gain you get is more than
overwhelmed by the big pain you get from setting CPUTYPE.
Thanks Jonathan. I think I'll reinstall my 7.0 system from scratch and
install the apps from packages rather than build from
For months now I've been having ever increasing problems with software
(ports) stopping working - or not working properly; xorg, digikam,
jalbum, etc.
The problems are the same on 6.3-STABLE and a brand new, clean install
of 7.0. Searching mailing lists and Google makes me think that a lot of
Roland Smith wrote:
On Wed, May 28, 2008 at 08:37:55PM +0100, Mark Ovens wrote:
Roland Smith wrote:
You could try using the atausb driver instead of umass. Unfortunately it
doesn't have a manpage yet, but you have to unload umass if you want to
use atausb.
Thanks Roland, but I can't find
Mark Ovens wrote:
Hi Roland,
I had to rebuild the kernel without umass in it first, but here's the
result.
Follow up:
I discovered that atausb wants to attach the disk as a floppy and I
don't have a FD so the module isn;t compiled into my kernel.
kldload'd atapifd.ko and it now sees
Bob McConnell wrote:
From: Mark Ovens
If anyone can tell me how to debug this to try to get to the cause so
a
fix can be found then I'm happy to spend the time doing so.
Unless you are already familiar with the drivers and the bus itself, or
want to learn more about it than anyone should
Bought an external USB HD enclosure but it doesn't work under FreeBSD.
Under FreeBSD-6.3-STABLE:
umass0: Super Top USB 2.0 IDE DEVICE, rev 2.00/2.01, addr 2
da2 at umass-sim0 bus 0 target 0 lun 0
da2: MAXTOR 6 L040J2 \\ Fixed Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2:
Chuck Robey wrote:
I saw a mail yesterday about something nearly like this, from nej, except with
him, the umass device wasn't reporting anything at all, no device when he
plugged it in. I sent him a little piece of usb driver code that resets his usb
buss, just to experiment and see if that
Mark Ovens wrote:
Chuck Robey wrote:
I saw a mail yesterday about something nearly like this, from nej, except with
him, the umass device wasn't reporting anything at all, no device when he
plugged it in. I sent him a little piece of usb driver code that resets his usb
buss, just to experiment
Roland Smith wrote:
You could try using the atausb driver instead of umass. Unfortunately it
doesn't have a manpage yet, but you have to unload umass if you want to
use atausb.
Thanks Roland, but I can't find atausb in either 6.3 or 7.0 - is it a
kld module?
Presumably, it would not work
Roland Smith wrote:
Yes;
$ locate atausb
/usr/src/sys/modules/ata/atausb
/usr/src/sys/modules/ata/atausb/Makefile
(This is on 7-STABLE)
Ah, so it's not built by default!
Presumably, it would not work with other usb mass storage devices like
memory sticks or phones?
It should work with
Currently using a Radeon 8500LE but since u/g to xorg 7.3 I've had
nothing but trouble with X hanging/crashing/locking-up.
From what I've read, the state of the radeon drivers leaves much to be
desired and although some people seem to have trouble with nVidia cards
they appear to be a better
Manolis Kiagias wrote:
Don't know about CompuViz, but if you would like to try compiz fusion,
I am a bit tempted to point you to this article (maybe because I am the
author :)
Ah, compiz - that's what I was thinking of ;-)
Chuck Robey wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
nej ALL wrote:
Hi,
I'm new on FreeBSD not on unix.
I want to mount automatically an usb-stick memory into my machine ?
I get some problems.
Need help.
You're trying with your devfs stuff to create the file, but you have to
Darren Spruell wrote:
During attempted startup and when using CTRL+ALT+BKSP to kill the
server the Xorg process drives CPU usage to 100%:
PID USERNAMETHR PRI NICE SIZERES STATE C TIME WCPU COMMAND
1203 root 1 1180 28168K 23960K CPU1 1 1:21 100.00% Xorg
I have
Nicholas Godson wrote:
So what you are wanting is a program like Snag-It for Windows, Ksnapshot
can do this I think. Haven't used it in quite a while though.
KSnapshot doesn't grab the cursor either.
Regards,
Mark
___
Peter Boosten wrote:
Ken Gunderson wrote:
[snip]
Looks like you're having a problem with your window manager, instead of
Xorg.
Mine (with enlightenment-devel) works like charm. None of the issues
you describe anyway.
Peter
So how would you explain that I am seeing same type of behaviors
Torgeir Hoffmann wrote:
On beforehand, I appologize for sending a rather incomplete mail regarding
this last week, I hope with this new information that I can find a clue on
how to debug or solve this problem.
I have the following problems with my xorg 7.3 installation, even after I
have
This post hasn't appeared on the list after almost 24 hours so I'm
re-posting. Apologies if it appears twice.
It seems that about 50% of the posts I make to the lists (-questions and
-ports) never show up.
Matthew Seaman wrote:
I've been doing a bunch of 6.x - 7.0 upgrades recently.
Martin Schweizer wrote:
Hello
If I su from user martin to root or from user martin to martin (for testing) I
get this errors in /var/log/messages:
[snip]
May 9 11:33:08 merkur init: can't get /dev/console for controlling terminal:
Operation not permitted
May 9 11:33:38 merkur init: can't
Alfredo Finelli wrote:
I have 80 pin SCSI discs mounted in hot-swappable trays on a SCSI
backplane which takes care also of powering them up and of SCSI
termination. This is one way of using them.
I also have the same drives in a different system connected to normal SCSI
LVD cable using
Scott Ballantyne wrote:
Running 5.3-RELEASE.
After many years of using FreeBSD, and as many reboots or more, I had
occasion to reboot today, and a few hours later discovered to my
horror that the system time had suddenly been moved ahead to the year
2020!
I did the best I could with the
Is there such a thing as a virtual CD drive in the Ports. Something that
allows you to treat an ISO image file - data or audio - as though it
were a real CD in a real drive? Like Nero ImageDrive in Windows.
TIA
Regards,
Mark
___
Since src u/g 5.4-6 the *_enable variables in rc.conf for local rc.d
scripts are being ignored. For example, neither lisad (for KDE LAN
Browsing) or giftd (for giFT) are starting.
In rc.conf I have:
lisa_enable=YES # Lisa daemon for LAN Browsing in Konqueror
giftd_enable=YES
Kent Stewart wrote:
On Wednesday 07 December 2005 12:55 pm, eoghan wrote:
Hello
Ive recently upgraded to 6.0 and I decided to upgrade my ports... So
I ran a:
portupgrade -af
Its running fine, but each time its upgrade a port I get:
[Updating the pkgdb format:bdb1_btree in /var/db/pkg ... Failed
Colin Percival wrote:
Mark Ovens wrote:
After reading this thread, I killed the upgrade, deleted INDEX-6,
INDEX-6.db, and pkgdb.db; rebuilt pkgdb.db using `pkgdb -u' and re-ran
`portupgrade -af'
It started off OK (using dbm_hash) but after a couple of hours it had
started continually
Anthony Atkielski wrote:
Linux is a great case in point. What a pity that when people finally
looked at something like UNIX, it turned out to not be UNIX at all,
but someone cooked up in a schoolkid's garage.
History repeating itself? Microsoft began life in Bill Gates' garage
didn't it?
A
daniel wrote:
On February 7, 2005 10:40 pm, Chris Hill wrote:
On Mon, 7 Feb 2005, daniel wrote:
i've been trying to install freebsd-5.3RELEASE on this old computer on
and off for days now. i downloaded the floppies, watched the thing
boot and each and every time, it'll get to the little
Charles-André Landemaine wrote:
This will sign the death of FreeBSD.
How could they believe such crap?! Who said beastie is evil?! This is
totally non-sense, it's a logo, it's not the CD cover of a heavy-metal
release...!
I think the reasons are the same as NetBSD. Do extremist Republicans
Louis LeBlanc wrote:
On 02/09/05 04:32 PM, Charles-André Landemaine sat at the `puter and typed:
This will sign the death of FreeBSD.
How could they believe such crap?! Who said beastie is evil?! This is
totally non-sense, it's a logo, it's not the CD cover of a heavy-metal
release...!
I think the
[EMAIL PROTECTED] wrote:
Hello,
I have installed apache and spamd from source and would like for them
to start on bootup. How do I do that? (there are no .sh scripts for
them in /usr/local/etc/rc.d)
For apache add ''apache_enable=YES'' to /etc/rc.conf
There should be apache.sh in
Nathan Kinkade wrote:
On Fri, Feb 04, 2005 at 06:13:01PM +0100, Benjamin Walkenhorst wrote:
Steven Friedrich wrote:
I know I can Control-Alt-F1 to go back to the console, but is there a way
to see these messages in an xterm or something?
xconsole
When xdm starts, xconsole gets started, too,
Tom Huppi wrote:
Almost totally unrelated, but this reminds me of a very pleasant
conversation I had with on of the early FreeBSD developers. He
mentioned that the FreeBSD project grew out of what was known as
'the unofficial 386BSD patch kit' or something like that name. He
said that it got to
Rakhesh Sasidharan wrote:
On Wed, 2 Feb 2005 01:48:47 -0800, Loren M. Lang [EMAIL PROTECTED] wrote:
Unless BootPart specifically know about how the freebsd boot loaders
work and how to reconize them, I doubt that it's modifying those
parameters. Now the last 66 bytes of the MBR stores the
Tim Erlin wrote:
Andrew L. Gould wrote:
Not necessarily. I've heard lots of complaints about PHP and Apache2
not playing nice. (Does anyone have any updates on this situation?)
I've been running apache2 with squirrelmail for a while. The biggest
problems were performance issues. Squirrelmail
Adi Pircalabu wrote:
On Tue, 01 Feb 2005 16:54:19 +
Mark Ovens [EMAIL PROTECTED] wrote:
Anyway, it's all working now, except that when I try to connect to
squirrelmail in a browser I just get a directory listing of
/usr/local/www/squirrelmail.
Hi,
Maybe you forgot listing index.php
Adi Pircalabu wrote:
On Tue, 01 Feb 2005 17:12:02 +
Mark Ovens [EMAIL PROTECTED] wrote:
Should have mentioned that I tried adding that but it just caused the
contents of index.php to be displayed in the browser rather than the
directory listing.
If I understand this correctly, your .php page
Mark Ovens wrote:
That's fixed it, thanks :-)
httpd.conf from the previous version I had installed doesn't have
index.php in the DirectoryIndex directive, but it does have
Duh! brain fade; that should say:
...does have index.php in the DirectoryIndex directive, and it also has
Mark
---
avast
Ruben de Groot wrote:
On Mon, Jan 31, 2005 at 05:47:53AM -0800, Loren M. Lang typed:
On Mon, Jan 31, 2005 at 12:38:53PM +, Mark Ovens wrote:
Loren M. Lang wrote:
replacing MYWORKGROUP, SERVER, USER, secret as neccessary. Make sure
nsmb.conf is only readable by root. Add the following line
Rakhesh Sasidharan wrote:
No, boot0 is just a normal file that is 512 bytes long. There is
nothing special about it. In it is a bootloader program that can be
used to boot FreeBSD, and if you run it during boot, it will read the
partition table and look for all OSes. I think it will modify the
the FreeBSD F1/F5 choice.
Caveat: Things have no doubt changed since then so it may now be
possible to add FreeBSD to the NTLDR menu with FreeBSD on a different
disk, but I've never investigated it as I am happy with the solution I use.
HTH
Regards,
Mark
On Mon, 31 Jan 2005 08:44:23 +, Mark Ovens
Loren M. Lang wrote:
replacing MYWORKGROUP, SERVER, USER, secret as neccessary. Make sure
nsmb.conf is only readable by root. Add the following line to fstab:
//[EMAIL PROTECTED]/share /mnt/share smbfs rw 0 0
PMJI, but do you know if it's possible to handle a share
saravanan ganapathy wrote:
Hai ,
I am using 5.3 release and included tag=RELENG_5_3 to
my ports-supfile and when I tried to update ports
using cvsup -g -L 2 /root/ports-supfile, it deleted
almost all the ports and finally it says
...
...
...
Delete ports/x11-wm/yawm/Makefile
Delete
Mark Ovens wrote:
Also are you sure that you want your ports tree in /var/db? /usr would
be more usual.
*default base=/usr
Duh! Ignore that, /var/db is fine (although I use /usr/sup) I was
confusing base and prefix. Sorry, 'bout that.
Mark
---
avast! Antivirus: Outbound message clean.
Virus
Loren M. Lang wrote:
On Mon, Jan 31, 2005 at 12:38:53PM +, Mark Ovens wrote:
Loren M. Lang wrote:
replacing MYWORKGROUP, SERVER, USER, secret as neccessary. Make sure
nsmb.conf is only readable by root. Add the following line to fstab:
//[EMAIL PROTECTED]/share /mnt/share smbfs rw
Rakhesh Sasidharan wrote:
On Mon, 31 Jan 2005 11:33:59 +, Mark Ovens [EMAIL PROTECTED] wrote:
I rewrote that section of the FAQ years ago (around FreeBSD 3.1!!)
because the previous wording was unclear and I did _exactly_ what
Rakhesh has done :-(
Ah! Glad to see I am not the only one
I want to install apache with SSL but there are two ports,
www/apache13-modssl and www/apache13-ssl
What is the difference, and which is the best to install? It is just for
use on my home LAN but I want to run squirrelmail to access my mail from
remote machines.
TIA
Regards,
Mark
---
avast!
Charles Swiger wrote:
On Jan 31, 2005, at 1:22 PM, albi wrote:
Mark Ovens wrote:
I want to install apache with SSL but there are two ports,
www/apache13-modssl and www/apache13-ssl
What is the difference, and which is the best to install?
i think the apache13-ssl has SSL build in, the other uses
I see this in the daily run output on a 4.10-R box:
Removing stale entries from sendmail host status cache:
purgestat: no mapping in /etc/mail/mailer.conf
What is the mapping that is missing? The machine is running postfix, not
sendmail BTW.
TIA
Regards,
Mark
---
avast! Antivirus: Outbound
On 22/01/2005 17:58 Jorn Argelo stood on a soap-box and preached to the
unwashed masses:
On Sat, 22 Jan 2005 17:46:32 +, Mark Ovens wrote
I see this in the daily run output on a 4.10-R box:
Removing stale entries from sendmail host status cache:
purgestat: no mapping in /etc/mail/mailer.conf
On 22/01/2005 19:01 Paul Schmehl stood on a soap-box and preached to the
unwashed masses:
--On Saturday, January 22, 2005 5:46 PM + Mark Ovens
[EMAIL PROTECTED] wrote:
I see this in the daily run output on a 4.10-R box:
Removing stale entries from sendmail host status cache:
purgestat
Daniel Bye wrote:
On Tue, Jan 18, 2005 at 08:30:52PM +1000, Warren wrote:
What is need for me to add/do in order for the pressing of Tab to
autcomplete a name to work? It works fine in root .. also when i
press the up or down arrow keys it dosent bring up the previous
command issued ...
im
Warren wrote:
On Tue, 18 Jan 2005 10:03 pm, Daniel Bye wrote:
On Tue, Jan 18, 2005 at 11:52:16AM +, Mark Ovens wrote:
It does support command history and editing, though not auto-complete.
''set -E'' or ''set -V'' at the prompt (or put either - they are
mutually exclusive - in ~/.profile
Gardner Bell wrote:
After rebuilding world last night I can no longer chmod some system
binaries that I don't need. When attemtping to do so I get a permission denied.
[EMAIL PROTECTED] chmod 000 /bin/rcp
chmod: /bin/rcp: Operation not permitted.
[EMAIL PROTECTED] chmod 000 /bin/rlogin
chmod:
KDE 3.3.2
Any key combination that includes Ctrl+Shift doesn't work, e.g.
Ctrl+Shift+C to MArk All Read in Thunderbird or Ctrl+Shift+D to
Uncomment a line in KWrite.
It is the combination that is ignored; Ctrl+key and Shift+key work
as expected.
I've looked at all the keyboard stuff in
LAN Browsing in Konqueror (Services tab in Navigation panel) was working
fine in the previous version I was running (3.2.x IIRC) using the lisa
daemon. In 3.3.0 however, when I select LAN Browsing I get an error
Protocol not supported: lan.
ISTR reading somewhere that lisa had been replaced by
On Mon November 29 2004 02:32, Robert Huff wrote:
Trey Sizemore writes:
OK...making some progress now. I have these entries (except I'm
using /dev/psm0 for the time being) and now the mouse is jumping
to the upper left corner of the screen and flickering menus
mysteriously. Moving
On Sun November 28 2004 21:03, Trey Sizemore wrote:
Mark Ovens wrote:
On Sun November 28 2004 19:35, Trey Sizemore wrote:
Mark Ovens wrote:
On Sun November 28 2004 18:28, Trey Sizemore wrote:
Hmmm...not sure why mine's not working then. Is your mouse the
wireless version? Mine says
On Mon November 29 2004 12:54, Mark Ovens wrote:
# make buildkernel installkernel
Duh! typo. That should read
# make buildkernel make installkernel
Regards,
Mark
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
Oliver Fuchs wrote:
Hi,
I had a directory which contained the following:
ls showed me simple this: ? with 0 bytes
ls -axl showed me nothing
So I tried to delete the directory but could not succeed with rm -R
because the directory is not empty. I changed to the directory and tried
to delete
On Sat November 27 2004 22:26, Trey Sizemore wrote:
Mark Ovens wrote:
Trey Sizemore wrote:
I've just installed FreeBSD 5.3 on my desktop machine (P4 2.8GHz with
512MB RAM) and cannot get my mouse pointer to move in KDE. It is a
Microsoft Wireless Optical 2.0 mouse (USB) and I have
On Sun November 28 2004 18:28, Trey Sizemore wrote:
Hmmm...not sure why mine's not working then. Is your mouse the wireless
version? Mine says Microsoft Wireless Mouse 2.0 (it's kind of a light
purple color ).
Yes, same as mine.
You did change ''moused_port'' in /etc/rc.conf to /dev/psm0
On Sun November 28 2004 19:35, Trey Sizemore wrote:
Mark Ovens wrote:
On Sun November 28 2004 18:28, Trey Sizemore wrote:
Hmmm...not sure why mine's not working then. Is your mouse the wireless
version? Mine says Microsoft Wireless Mouse 2.0 (it's kind of a light
purple color ).
Yes
On Sun November 28 2004 22:22, Trey Sizemore wrote:
Mark Ovens wrote:
On Sun November 28 2004 18:28, Trey Sizemore wrote:
Hmmm...not sure why mine's not working then. Is your mouse the wireless
version? Mine says Microsoft Wireless Mouse 2.0 (it's kind of a light
purple color ).
Yes
Trey Sizemore wrote:
I've just installed FreeBSD 5.3 on my desktop machine (P4 2.8GHz with
512MB RAM) and cannot get my mouse pointer to move in KDE. It is a
Microsoft Wireless Optical 2.0 mouse (USB) and I have the following
section in my /etc/X11/xorg.conf file:
Driver mouse
Option Protocol
I've set up postfix, fetchmail, and courier-imap on a FreeBSD box (4.10)
and got it working - for one account. When I added a second account it
goes wrong; all mail gets sent to the user that fetchmail is running as.
My .fetchmailrc contains
poll pop.myisp.com protocol POP3
user mark
Graham Bentley wrote:
Hi All,
When I was about to install the new drive which was sitting on top of
the system box I tilted the box to move the disc access LED lead onto
the SCSI card. My nice new SCSI disc slid off and hit the MDF worktop
- Agh !
I reckon the drop height was about 14 ~ do you
Michael Nottebrock wrote:
On Friday 17 September 2004 21:14, Mark Ovens wrote:
Hmmm, if I delete XFree86-libraries then X won't run, and without
libXinerama.so.1 KDE won't run :-/
Anyone have a solution to this conundrum please?
Yes: Update all of XFree86 to the latest version in ports (4.4
Is it correct that you can't ssh(1) between two machines on the same LAN
(using NAT) _via the Internet?_
Strange question I know, but I need to be able to access one of my
machines, postie, remotely. I've got sshd(8) running and can ssh(1) to
it from a local machine using it's local hostname.
Chuck Swiger wrote:
Mark Ovens wrote:
Is it correct that you can't ssh(1) between two machines on the same LAN
(using NAT) _via the Internet?_
Strange question I know, but I need to be able to access one of my
machines, postie, remotely. I've got sshd(8) running and can ssh(1) to
it from
Erik Trulsson wrote:
On Mon, Sep 13, 2004 at 10:15:47PM +0100, Mark Ovens wrote:
Is it correct that you can't ssh(1) between two machines on the same LAN
(using NAT) _via the Internet?_
What do you mean 'via the Internet'? If both machines are on the same
LAN any connections between them
kstewart wrote:
His PACKAGESITE environment variable is set to a wrong location. I think that
he needs to set it using something like
setenv PACKAGESITE
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-4-stable/All
Thanks Kent, but it didn't work. Setting it made it search in
FreeBSD postie 4.9-RELEASE FreeBSD 4.9-RELEASE #1:
Sun Mar 21 19:46:39 GMT 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/POSTIE i386
I'm trying to upgrade cups-base on this system, using packages (as the
machine doesn't really have enough grunt for building ports), with
portupgrade, but it
kstewart wrote:
Well, png is up to png-1.2.5_8 and if you did a recent cvsup and
recreated your INDEXs, that is what you should be seeing.
OK, portupgrade(1) _is_ looking for 1.2.5_8 but it is trying to get it
from
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-4.9-release/All
where the
FreeBSD 4.9-RELEASE
My ADSL router/modem, Zyxel P650R-31, supports error logging to a remote
*nix host using syslog but I can't get it to work.
The router has been set up to log to the local2 facility and I've added
these lines to the end of /etc/syslog.conf:
!*
+P650R-31
local2
Martin Hasenbein wrote:
On 26 Aug 2004 (13:55:35) [1093521335], Mark Ovens wrote:
Hi Mark,
The router has been set up to log to the local2 facility and I've added
these lines to the end of /etc/syslog.conf:
!*
+P650R-31
local2 /var/log/router/zyxel
Can anyuone suggest why
Martin Hasenbein wrote:
On 26 Aug 2004 (15:30:52) [1093527052], Mark Ovens wrote:
Hi Mark,
Thanks, yes, I was. I've changed it and restarted without ''-s'' but it
still doesn't appear to be logging anything - I configured the router to
log everything so the file should grow quite quickly.
Do
Chris wrote:
Paul Schmehl wrote:
--On Tuesday, August 10, 2004 05:45:58 PM -0400 JJB
[EMAIL PROTECTED] wrote:
Over the years I have seen many posts on this list where Unix hard
liners complain about people posting their replies to the top of the
email messages on this list.
The fact of life is
Ion-Mihai Tetcu wrote:
On Fri, 30 Jul 2004 14:30:59 +0100
Mark Ovens [EMAIL PROTECTED] wrote:
Peter Ryan wrote:
I've got the same thing on the 2 machines i am experimenting
with. I am new and thought it was a standard feature :)
I also defined a standard US 101 keyboard.
Makes me think
Mariano Guadagnini wrote:
Hi guys, I am new to Freebsd (after years of linux) and, althought system
installation and configuration was quite seamlessly, I've an issue with the
delete key of my keyboard (101 keys us layout): In xterm, the backspace key
works ok, but when I press del, it prints
Peter Ryan wrote:
I've got the same thing on the 2 machines i am experimenting
with. I am new and thought it was a standard feature :)
I also defined a standard US 101 keyboard.
Makes me think there is a setting or choice at installation that
deals with this, rather than having to patch
Chris wrote:
Sandbox Video Productions wrote:
IF i install both gnome kde. how do i choose which
one i want to start up. It seem that it only starts
the GUI that was installed last.
__
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
If I put this in ~/.xinitrc
exec startkde /dev/console 21
to redirect messages to the console in order to read them in xconsole, X
starts and immediately exits with the error:
/home/mark/.xinitrc: cannot create /dev/console: permission denied
I've uncommented this line in /etc/fbtab:
Mark Ovens wrote:
If I put this in ~/.xinitrc
exec startkde /dev/console 21
to redirect messages to the console in order to read them in xconsole, X
starts and immediately exits with the error:
/home/mark/.xinitrc: cannot create /dev/console: permission denied
I've uncommented this line
Paul Mather wrote:
Mark,
When you do, look for PREEMPTION. That should speed up the search. :-)
Yes, I searched the mailing lsts and found it, deleted #define
PREEMPTION from sys/i38i6/include/param.h, rebuilt my kernel and the
machine has been up for 13 hours now :-)
Only thing is the
Karol Kwiatkowski wrote:
Joseph Peterson wrote:
Unfortunately that is not the solution to my problem, I've run
memtest86 on my laptop several times and found no problems... any
other thoughts? =)
-joe
Just a thought:
Have you build your world and / or kernel from source? If that's the
case double
Karol Kwiatkowski wrote:
Mark Ovens wrote:
I'm seeing the same problem on my dual Athlon box. The freezes are
totally random AFAICT, sometimes when the machine is just idling.
I've not used any CPU-specific make options but may try setting some to
see if it makes a difference. One thing though
I'm trying to upgrade kde (the meta-port), 3.1.2-3.2.3_1 using
portupgrade(1) but it fails trying to install kdelibs.
Can anyone shed any light on what's wrong?
FreeBSD redshift 5.2-CURRENT FreeBSD 5.2-CURRENT #2: Sun Jul 25 19:19:46
BST 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/REDSHIFT
for the reply.
Regards,
Mark
Kent
On Monday 26 July 2004 05:40 am, Kent Stewart wrote:
On Monday 26 July 2004 05:20 am, Mark Ovens wrote:
I'm trying to upgrade kde (the meta-port), 3.1.2-3.2.3_1 using
portupgrade(1) but it fails trying to install kdelibs.
Can anyone shed any light on what's wrong
Henrik W Lund wrote:
Greetings!
No, nothing you put into make.conf will affect already installed
software. This file is for setting build-time options, and as such will
only affect subsequent software builds. And yes, rebuilding and
reinstalling a package you already have qualifies as a
Hakim Singhji wrote:
Hello All,
I recently purchased a pair of 3Com 3C905CTXM EtherLink XL PCI TX
Network adapter PCI 100 Mbps NIC Cards and I wanted to know if they
are compatible with FreeBSD 4.10 (stable). Could someone please give
me some feedback on this thanks.
Yes,
Kent Stewart wrote:
Kdelibs has the new files and when you try to update kdebase later, it
messes up the install. That is why you have to delete kdebase first. If
the files had been moved from kdelibs into kdebase, it wouldn't have
mattered.
Ah, I see. OK, I'll give it a spin. Thanks for the
Malcolm Kay wrote:
On Saturday 15 May 2004 12:04, [EMAIL PROTECTED] wrote:
Here is the output of fdisk when ran from FBSD:
frankie# fdisk
*** Working on device /dev/ad0 ***
parameters extracted from in-core disklabel are:
cylinders=155061 heads=16 sectors/track=63 (1008 blks/cyl)
Figures
J. W. Ballantine wrote:
The full fdisk output is:
*** Working on device /dev/ad0 ***
parameters extracted from in-core disklabel are:
cylinders=4865 heads=255 sectors/track=63 (16065 blks/cyl)
[snip]
I take it that the partition sizees reported are correct?
It a Dell, but given the
Mark Ovens wrote:
Not come across Smart Boot Manager but I wonder if it creates a small
partition to run from; the OS/2 Boot Manager, which was also shipped
with older versions of Partition Magic, did but, like recovery
partitions it didn't get a drive letter.
Ah! I've just thought
Bart Silverstrim wrote:
On May 7, 2004, at 1:40 PM, Mark Ovens wrote:
J. W. Ballantine wrote:
It a Dell, but given the configuration, i do not believe it came
pre-installed from the factory.
I would have thought that a Dell would have had *an* OS pre-installed.
Not always. I am running FBSD
J. W. Ballantine wrote:
Ok, either I'm missing something very basic or
I'm trying to mount a w2k ntfs file system with: mount_ntfs
/dev/ad0s1 /C and I get back: mount_ntfs: /dev/ad0s1: Invalid
Argument
Is the filesystem you are trying to mount the first _primary_ partition
on the first (i.e.
J. W. Ballantine wrote:
yes, there is only one hard disk.
What does the output from `fdisk ad0' show?
Regards,
Mark
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
I've run `pkgdb -F' prior to using portupgrade to update some ports. The
obvious stuff, such as dependency versions being bumped, I've dealt with
as they were pretty much self-explanatory but I'm left with these few.
The manpage doesn't offer any explanation and I can't find anything else
PROTECTED]
From: Mark Ovens [EMAIL PROTECTED]
Subject: Re: ntfs mount
J. W. Ballantine wrote:
yes, there is only one hard disk.
What does the output from `fdisk ad0' show?
Regards,
Mark
___
[EMAIL PROTECTED] mailing list
http
1 - 100 of 122 matches
Mail list logo
