I think monowall is what you are looking for.
Or his more advanced brother - pfSense.
Bye,
Nejc
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
Hey,
The simple answer is no: if you want subnet-local broadcast traffic to
be received, then your DB servers and your clients need to be on the
same subnet. Routers are designed and required to not propagate
broadcast traffic, although you could switch to doing bridging rather
than
Hello,
I have a central FreeBSD 7.0 router running pf with SERVERS and USERS1 and
USERS2 networks
attached to it.
I also have some Sybase SQL servers on SERVERS network, which use broadcasts to
announce
themselves to the network. Before, when there were no separate segments,
everything worked
Hey,
no toe capability on 0xc2e66400
Looks like this is was fixed 7/31/2008:
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_offload.c.diff?r1=texttr1=1.4.2.1r2=texttr2=1.4.2.2
That was fast!
Bye,
Nejc
___
freebsd-questions@freebsd.org
Hello,
mailserver. However, never having done this before myself, I was
wondering if anyone here
had any useful comments about this guide, particularly if you think it's
missing any key points
that will leave me cursing at my monitor late one night.
I'm currently planning on using FreeBSD
Hello,
I have a FreeBSD 7.0 system with jails (and services in them). In one of the
jails there
is an Apache server, which also runs on the host system (and forwards traffic
using
mod_proxy to the jailed Apache).
Everything works as expected, I only have problems with pf which seems to block
Hello,
I am buying hardware for a FreeBSD server and me and my friend argue about
whether or not to by ECC RAM for the server. It is a HP ProLiant ML110 G4
machine and currently it has 2 x 512 HP DDR2 ECC memory.
My friend says buying ECC memory is not wise, because we would not profit from
it
Hey,
Have you, by any chance, tried and suceded at mounting ext2fs on FBSD7?
If you did, at least I'd know that it _is_ possible :s
It is possible, although I haven't used this on FreeBSD 7.0 yet (only on 5.x
and 6.x releases).
I'd also try this:
mkdir /mnttest
mount -t ext2fs /dev/ad0s8
Hey,
ls -la / | grep mnttest
Can you paste output of this command?
sysid 5 (0x05),(Extended DOS)
start 102398310, size 106446690 (51975 Meg), flag 0
beg: cyl 1023/ head 0/ sector 1;
end: cyl 1023/ head 254/ sector 63
So the partition you're trying to mount is under an
where to get the source?
http://perforce.freebsd.org/depotTreeBrowser.cgi?FSPC=//depot/user/riddick
Looks like the site where I got it from
(http://home.tiscali.de/cmdr_faako/geom_raid5-eff.tbz) doesn't exist anymore.
Bye,
Nejc
___
Hello,
my network card is failing - dmesg is full of this:
re0: PHY write failed
re0: reset never completed!
re0: reset never completed!
re0: PHY write failed
re0: reset never completed!
re0: PHY write failed
re0: link state changed to DOWN
re0: link state changed to DOWN
re0: reset never
Hey,
My guess is that something has mmap-ed a HUGE chunk of
disk space. If I reboot the space is freed.
Much more likely is that some program has deleted a large file,
while still holding it open. Usual suspect is some kind of log file,
or temporary file.
I also had a similar problem,
Hi,
Well, fdisk(8) is somewhat cumbersome to use. Personally I tend to invoke
sysinstall(8) to create new slices (can be done after install too.) Much
easier to use.
OT, but: does sysinstall's fdisk also support gmirror and gstripe devices?
Or do I need to use fdisk to make slices there?
Hello,
I am a final year student of Faculty of computer and information science from
Slovenia.
I've also been a Linux/BSD system/network administrator for quite some years
now.
I am starting to write my thesis and I am looking for good ideas. I am mostly
interested in small/medium business
Hey,
Set it with
sysctl inet.inet.ip.forwarding=1
or
Alternatively set it by adding this to /etc/sysctl.conf
net.inet.ip.forwarding=1
I guess more proper way of doing this is adding:
gateway_enable=YES
into /etc/rc.conf? I don't have any sysctl custom configuration in my
sysctl.conf
and
Hey,
I was using it because I could then assign my laptop the same IP easily
through my router (a separate device with DHCP) and also have hostnames
pushed through DHCP. But I imagine in my case I could do the same thing
with a tunnel.
Actually I don't think you can do the same thing with a
Hello,
I am also (very) interested in running FreeBSD under HyperV since HyperV will
liberate itself from Windows Server soon after the final release (it will not
depend
on an preliminary Windows Server installation but will be standalone and
practically free of charge, which makes it (for me)
Hey,
I recently upgraded a machine from FreeBSD 6.3 to 7.0. Everything is
working fine except for the OpenVPN server. I had it set up with a
bridge configuration, but now even with a basic tunnel I can't get
successful ping across the VPN. I can make a connection from both Linux
and OS X but
Hello,
anyone tried running HylaFAX in a FreeBSD jail? Does it work?
Thanks,
Nejc
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hey,
don't use gmirror and atacontrol at the same time. Use one or the other.
I don't. As I said:
Then I would merge the second
slice of all 4 drives into a 0+1 array (first gstriping and
then gmirroring them). I somehow succeeded this, but I also
get a WARNING when booting the system:
Hello,
I have FreeBSD 7.0 and 4 250GB SATA disks and I would like to make one big 500GB
0+1 RAID array. My hardware is HP ProLiant ML110G5.
First I tried creating ATA RAID arrays with BIOS tools, but FreeBSD wouldn't
recognize the arrays.
Than I decided to create the RAID-0 arrays with
Hey,
I am sure this topic has been discussed before, however, I have been
coming across unanswered inquiries within the last two months about
possibly using the trunking aspect of 802.1q standard network routing,
with only freebsd.
I have attempted to create mulitple vlan interfaces and
Hey,
What does your ifconfig line read from /etc/rc.conf (the alias line)
ifconfig_rl0=192.168.15.198 netmask 255.255.255.0
ifconfig_rl0_alias0=192.168.15.201 netmask 255.255.255.0
defaultrouter=192.168.15.1
jail_enable=YES
jail_sysvipc_allow=YES
jail_socket_unixiproute_only=NO
Hey,
ifconfig_rl0_alias0=192.168.15.201 netmask 255.255.255.0
the mask of an alias ipadres needs to be 32 bits.
I do not now if this solves your problem but it needs to be 32 bits.
ifconfig_rl0_alias0=192.168.15.201 netmask 255.255.255.255
I tried with 24 bits - it doesn't work one way or
Hey,
OK.. if it is running inside your jail it doesnt respond to WINS
broadcasts (request for NETBIOS Names.. oi, who is Machine on this
subnet???), if it is not running in your jail, it is.
I wouldn't say WINS broadcasts but NetBIOS broadcasts, yes. Machine
is jailed Samba 3 server - I want
Hi,
This is nota n issue with samba it is a name resolve issue.
Then why is Samba replying to NetBIOS broadcasts very nicely when I put
it outside jail (with the same configuration)? As far as I understand
Samba also provides resolving - NetBIOS resolving via its nmbd.
If you add in
Hi,
I'm not sending this message to the list as I've not been following the
discussion; I just skimmed thru it.
I hope you don't mind that I sent it to the list too.
I would check too things, a) a firewall (sorry if this has been talked
about, as I said I didn't read it all) or b) enable
Hey Johan,
I think you will need to remove 127.0.0.1
Just use 192.168.1.2/24
There is no 127.0.0.1 on a jailed system
I have done so - I still can't do smbclient //machine from another box to
the jailed Samba. If I put the Samba out of the jail (same version, same config)
it works as it
Hey Johan,
Well i use ezjail for my jails, i leave everything else standard, but have the
same sysctl value's
This is my smb.conf (it is a fileserver as member of a domain for my domain).
[global]
...
wins server = hz2-serv.mydomain.local
This is why it works for you. You use external
Hey again,
I am trying to get latest Samba running under FreeBSD 7.0 jail
environment. I happen
to have problems with visibility of the Samba server on the network -
I cannot connect
to it using its NetBIOS name. To be able to run nmbd, I have to use the
interfaces
parameter in smb.conf like
Hello,
I am trying to get latest Samba running under FreeBSD 7.0 jail environment. I
happen
to have problems with visibility of the Samba server on the network - I
cannot connect
to it using its NetBIOS name. To be able to run nmbd, I have to use the
interfaces
parameter in smb.conf like
Hi Douglas,
That's the problem all right (got bit years ago by it).
It's been a while but if you've got a /tmp partition, mount it over
the memory file system /tmp so restore can lay off what it needs there.
Or make a memory file system backed by swap.
Thanks for this one, it solved my
Hey Tom,
I would like to run FreeBSD 7 on a HP ML110 G5. I understand from past posts
to this list that the ML110 series is FreeBSD friendly, but what about RAID 1
using the on-board SATA controller? Will this work and how do you set this
up?
I have just configured a ML110G5 with FreeBSD 7
everything you run on windows can be run on Freebsd and more.
Huh? AFAIK FreeBSD can not act as a domain controller for an Microsoft AD.
And this is something you would need in a company full of Windows boxen.
And don't tell me I can throw away Windows and install FreeBSD on hundreds
of clients
Hey Patrick,
AD is nothing more than a big database accessible over LDAP.
You connect to the LDAP database, and when you are authenticated you get a
kerberos token.
Clients use SRV records to check for AD services. SRV Records are
supported by BIND. It is possible to run AD and have your
Hey,
turn on linux emulation, use jail, just start directory with all linux
progs and libs.
well, it makes sense for me because I need to run Sybase ASA server, which
only runs on GNU/Linux. However, are you sure that this would work? I think
Sybase still needs genuine Linux kernel to run.
Hi,
I guess this is not possible yet? To run Linux virtualized on FreeBSD? I can
see, that Xen only runs as guest on FreeBSD at this time.
Thanks,
Nejc
___
freebsd-questions@freebsd.org mailing list
Hello,
I couldn't find any info on nCipher HSM support under FreeBSD. So, (how?) does
FreeBSD support nCipher HSM cards?
Thanks,
Nejc
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Hello,
I have a FreeBSD 5.3 system with two IDE disks. This is the dmesg at
boot time:
ad0: 117246MB Maxtor 6B120P0/BAH41G10 [238216/16/63] at ata0-master UDMA100
ad2: 117246MB Maxtor 6Y120L0/YAR41BW0 [238216/16/63] at ata1-master UDMA100
GEOM_MIRROR: Device gm0 created (id=2190829866).
Hello,
I just bought this ethernet card for my ProLiant ML110G4 machine but FreeBSD
doesn't recognize it. After some Googling I guess it is not supported at all.
Am I right?
pciconf -v -l says this:
[EMAIL PROTECTED]:0:0: class=0x02 card=0xed0011c1 chip=0xed0011c1 rev=0x02
hdr=0x00
Hello,
I would like to create a custom set of packages, so that they will
be installable to my other FreeBSD boxen.
As I understand, I have to use 'make package-recursive', but I have
some problems with it:
1. Is there a way to tell 'make package-recursive' not to _install_
package, but
Hello,
I am running BIND (from base system) on my FreeBSD 5.3 machine. The box is
connected to outer world via ADSL connection (tun0 device). If the named is
started when the machine is connected to the internet, then everything is OK,
I get this by saying netstat -n -a:
udp4 0 0
Hello,
I have FreeBSD 6.2 system with MosChip NM9805 card (additional parallel port):
[EMAIL PROTECTED]:4:0: class=0x078000 card=0x00101000 chip=0x98059710 rev=0x01
hdr=0x00
vendor = 'MosChip Semiconductors (Was: Netmos Technology)'
device = 'Nm9805 Parallel Port Adapter'
Hello,
I am have many FreeBSD 5.x and 6.x servers installed and I have this in my
/etc/profile:
LANG=sl_SI.UTF-8; export LANG
MM_CHARSET=UTF-8; export MM_CHARSET
because I am using UTF-8 encoding with PuTTY. It works with most applications
but not with dialog. For example, I get this when
Hello,
Ye, by installing the system with the timeout (i.e. just wait it out),
then building a kernel without umass at the first opportunity.
Still no luck. Today, I tried waiting till the timeout expired, but what
happened was, that in the middle of probing, the machine got rebooted.
It was
Hello,
Try waiting about 30 minutes, there was a nasty timeout problem here
when I tried it - you might have the same. Google for my posts on
freebsd-stable mailing list.
Okay, it really seems it's the nasty timeout I am facing (I booted into
the verbose mode and it's the controller which
Hello,
today I tried to migrate a FreeBSD 6.1 installation from an ordinary PC
machine to an IBM Blade HS21 server. The server is a brand new machine
with two Dual Core Xeon 5130 processors, two 72GB SAS drives.
When I try to boot FreeBSD (either from USB disk with the installation
I am trying
Hi Paul,
I am booting from a 512MB CF card, and run /var and /tmp from a RAM drive.
Upon startup, the CF card /var and /tmp dir. are copied into the ram drives,
the rest is Read Only. When it shuts down (not very often), the ram drive
contents are copied back to the CF card. You could backup
Hello,
I plan to install a FreeBSD 6.2 router/gateway/DHCP server on a EPIA
box with 1GB Transcend IDE Flash drive. Since Transcend says that
this device is capable of 10,000 insertion/removal cycles I assume
that I must minimize the number of writes to the drive. It is okay
with me if I have to
Hey,
this device is capable of 10,000 insertion/removal cycles I assume
Sorry for replying my own post, but now I fould out that this actually
means how many times can I insert/remove the module into/from the
motherboard. Actually the number I am interested in is much higher:
2,000,000
Hello Derek,
You will want the swap to some other device such a a regular hard
drive. A flash drive can get worn out cells and fail.
Also when just reading the flash drive? I would like to write to it
only when it is absolutely necessary (configuration change). I think
2 million
Hi,
m0n0wall gets around this by running out of RAM after booting from flash
(or CD, or hard disk):
Yes, I know both m0n0wall and pfSense, but I prefer a custom FreeBSD
installation
since I have developed some custom scripts which I would like to use.
This is what I am trying to do now -
Hello,
I just realized that having a colored output of make search command
issued in /usr/ports would be very helpful. So that different fields
would be colored differently and thus easier to read.
What do you think?
Bye,
Nejc
smime.p7s
Description: S/MIME Cryptographic Signature
Hello,
I have a FreeBSD 5.3 system with ATA disk drives. I have created a mirror
using these commands:
# gmirror label -v -b round-robin gm0 /dev/ad0
# modified /etc/fstab
# shutdown -r now
# gmirror insert gm0 /dev/ad2
After a year, one of the disk failed. When it failed, the kernel crashed
Hello,
I have a HP ProLiant server with Intel PCI express gigabit ethernet
card. Relevant output of pciconf -v -l:
[EMAIL PROTECTED]:0:0: class=0x02 card=0x10838086 chip=0x10b98086 rev=0x06
hdr=0x00
vendor = 'Intel Corporation'
class= network
subclass = ethernet
I have
Hey,
Please leave that to the desktop oriented BSD distributions. I wonder
how many server admins would like to see an X based installer.
Not me.
Bye,
Nejc
smime.p7s
Description: S/MIME Cryptographic Signature
Hello,
yesterday one of our clients did something interesting (stupid): they
connected both ends of an UTP cable to the same switch, to which our
FreeBSD server was also connected. The server was immediately completely
unresponsive from yesterday evening until this morning, when our tech
guy
57 matches
Mail list logo
