, full size (whatever 2TB value you were talking about).
2. RAID-6, 2TB.
From there, I'll figure out what needs to be done to get it fully
working for you.
I have Adaptec 2820SA on my FreeBSD 6.1-STABLE. But it work in RAID-10
mode. I was build RAID-5, RAID-6, but FreeBSD (5.3, 5.4, 6.0, 6.1
Scott Long wrote:
Eric Anderson wrote:
Ensel Sharon wrote:
On Mon, 19 Jun 2006, Jahilliya wrote:
Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array,
On Jun 18, 2006, at 10:44 PM, Ensel Sharon wrote:
Let's say I have 8 disks.
Let's say I require raid6.
You require RAID-6 because...? If you want more fault tolerance or
better performance, RAID-10 makes a lot more sense to me than RAID-6,
but YMMV.
If I make one array, I lose 25% to
Eric Anderson wrote:
Ensel Sharon wrote:
On Mon, 19 Jun 2006, Jahilliya wrote:
Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array, size ~2.8TB. Any
Ensel Sharon wrote:
I did all my due diligence, I contacted freebsd-fs and _made sure_ that
even though the 2820sa is not listed by name in the HCL, that I could take
a 6.1-RELEASE cd and install freebsd on a 2820sa.
I was _assured_ that these cards are supported in 6.1-RELEASE, that all is
I did all my due diligence, I contacted freebsd-fs and _made sure_ that
even though the 2820sa is not listed by name in the HCL, that I could take
a 6.1-RELEASE cd and install freebsd on a 2820sa.
I was _assured_ that these cards are supported in 6.1-RELEASE, that all is
well, and I could
On 6/19/06, Ensel Sharon [EMAIL PROTECTED] wrote:
I did all my due diligence, I contacted freebsd-fs and _made sure_ that
even though the 2820sa is not listed by name in the HCL, that I could take
a 6.1-RELEASE cd and install freebsd on a 2820sa.
I was _assured_ that these cards are supported
On Mon, 19 Jun 2006, Jahilliya wrote:
Try hitting scroll lock and then page up to view the dmesg or go to
the emergency console and run dmesg to see if it picked up any aac
devices. You may need to load the module yourself, you should be able
to do this from the emergency console (not sure
On Mon, 19 Jun 2006, Jahilliya wrote:
Try hitting scroll lock and then page up to view the dmesg or go to
the emergency console and run dmesg to see if it picked up any aac
devices. You may need to load the module yourself, you should be able
to do this from the emergency console (not sure
On 6/19/06, John Kozubik [EMAIL PROTECTED] wrote:
On Mon, 19 Jun 2006, Jahilliya wrote:
Try hitting scroll lock and then page up to view the dmesg or go to
the emergency console and run dmesg to see if it picked up any aac
devices. You may need to load the module yourself, you should be
Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array, size ~2.8TB. Any
problems with that ? Perhaps sysinstall cannot deal with a 2TB drive
? There are no
On Mon, 19 Jun 2006, Jahilliya wrote:
Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array, size ~2.8TB. Any
problems with that ? Perhaps
Ensel Sharon wrote:
On Mon, 19 Jun 2006, Jahilliya wrote:
Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array, size ~2.8TB. Any
problems with that ?
On Sun, 18 Jun 2006, Eric Anderson wrote:
6.1 sysinstall does in fact see both 2820sa controllers, and when I put in
a single 160GB sata drive, it does see that single drive and I can install
onto it, etc.
Sysinstall does _not_ see my 2.7TB raid6 array. I suspect that if it were
Ensel Sharon wrote:
On Sun, 18 Jun 2006, Eric Anderson wrote:
6.1 sysinstall does in fact see both 2820sa controllers, and when I put in
a single 160GB sata drive, it does see that single drive and I can install
onto it, etc.
Sysinstall does _not_ see my 2.7TB raid6 array. I suspect that if
Helo!
Did some one work with Adaptec 2820SA in FreeBSD?
In Adaptec web page I see that 2820SA is support in FreeBSD 5.35.4
Now I try install 5.4, but system answer no disk drives...
I was install it on FreeBSD 6 it work, but I try it on RAID 10, when
rebuild to RAID 5EE or RAID 5 system write
16 matches
Mail list logo