Hi,
I am experiencing problems with the combination of FreeBSD 5.4 + Epson
Stylus C60 when a job has been canceled by means of cutting the
power(of the printer) while it's printing.
On restart of the printer, FreeBSD will send it printing information,
but it should *not* do this, since the
Ron wrote:
On restart of the printer, FreeBSD will send it printing
information, but it should *not* do this, since the printer is
out of sync with FreeBSD. The result is garbage pages.
This is perfectly reasonable behavior. The print daemon does not
know you are trying to stop it from
2005/11/15, James Bailie [EMAIL PROTECTED]:
Ron wrote:
On restart of the printer, FreeBSD will send it printing
information, but it should *not* do this, since the printer is
out of sync with FreeBSD. The result is garbage pages.
This is perfectly reasonable behavior. The print
Ron wrote:
I am using Cups(I forgot to mention this).
I know nothing of CUPS. The manual is online however,
at:
http://www.cups.org/doc-1.1/sum.html#3_7
After a quick perusal, it appears one uses lpstat to get a job
id, and then one invokes cancel [id] and then lprm [id] to
cancel the job.
2005/11/15, James Bailie [EMAIL PROTECTED]:
Ron wrote:
I am using Cups(I forgot to mention this).
I know nothing of CUPS. The manual is online however,
at:
http://www.cups.org/doc-1.1/sum.html#3_7
After a quick perusal, it appears one uses lpstat to get a job
id, and then one invokes
On Tue, Nov 15, 2005 at 09:15:50PM +0100, Ron wrote:
2005/11/15, James Bailie [EMAIL PROTECTED]:
Ron wrote:
I am using Cups(I forgot to mention this).
I know nothing of CUPS. The manual is online however,
at:
http://www.cups.org/doc-1.1/sum.html#3_7
After a quick perusal,
