ep driver

I am using a Farallon pcmcia ethernet card in a Toshiba laptop. Pccard sees the card but does not load the required ep driver. How do I load the driver? Thanks, Ted Parks ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo

Re: ep driver

Ted Parks wrote: I am using a Farallon pcmcia ethernet card in a Toshiba laptop. Pccard sees the card but does not load the required ep driver. How do I load the driver? Thanks, Ted Parks Hey ted, To manually load a driver you should issue kldload if_ep.ko Hope this works. cheesr -- Kind regards

Re: ep driver does not start on 4.9 and 4.10

Using pccardd worked. There is an entry for the 3Com Megahertz 589E in /etc/defaults/pccard.conf. As the 7500 has a built-in sound card, I tried removing irq 5 from the irq pool. However doing that causes the boot to hang after: ppi0: Parallel I/O on ppbus0 I get a similar hang during startup

ep driver does not start on 4.9 and 4.10

Any help or ideas would be greatly appreciated. I have a Dell Inspiron 7500 (circa 1998) with a 3Com Megahertz card, model 3XXE589ET. On 4.9 and 4.10 the device is not probed. there do not seem to be any irq or memory conflicts, just nothing displays under network for boot -c. Various attempts

ep driver problem in 5.2?

by ifconfig ep0 up brings the card back to life again - if connecting the card to a 10 MB hub, there are no problems, it continues to work properly, even if there is no traffic through it for some time Unfortunately the ep driver does not support setting the media, otherwise it might be possible