Hi,
I’ve requested to add you as a friend on Doostang, an invite-only career
community started at Harvard, Stanford, and MIT. You can use Doostang to find
a job or internship, network, and access valuable career information from peers
and industry professionals.
Regards,
Huy
To accept this
Hi,
I’ve requested to add you as a friend on Doostang, an invite-only career
community started at Harvard, Stanford, and MIT. You can use Doostang to find
a job or internship, network, and access valuable career information from peers
and industry professionals.
Regards,
Huy
To accept this
Paul Schmehl wrote:
--On June 18, 2008 11:59:49 PM -0400 Sahil Tandon [EMAIL PROTECTED] wrote:
Also, what is the output of 'df -i /var'?
# df -i /var/
Filesystem 1K-blocksUsed Avail Capacity iusedifree %iused
Mounted on
/dev/da1s1d 283737842 5397568 255641248 2% 20350
M5 hosting, http://www.m5hosting.com. Those folks are great.
You can find more at http://www.freebsd.org/commercial/
On Wed, Jun 18, 2008 at 7:31 PM, Greg 'groggy' Lehey [EMAIL PROTECTED]
wrote:
I'm looking for somebody to host some web sites for me. Ideally I'd
like a complete machine, but a
On 19 Jun 2008, at 01:31, Greg 'groggy' Lehey wrote:
I'm looking for somebody to host some web sites for me. Ideally I'd
like a complete machine, but a jail would do too. I can find plenty
of Linux-based offerings, but the only one I can find with FreeBSD is
in Germany and requires me to be
On Wed, Jun 18, 2008 at 11:29:13AM -0400, David Robillard typed:
Well, i take this opportunity also to ask about Apache toowhich signal
should i send?
A HUP signal should work for apache.
Actually, the Apache documentation says that one must use USR1 instead
of HUP to send a
+1 for JC. The tech support and availability is unparalleled. Satisfied
customer for over three years.
+2 for JohnCompanies. Excellent support and good prices for VPS. I
intend to have several more VPS with them over the next few months.
HTH
Charlie
On Wed, Jun 18, 2008 at 08:23:20PM +0100, Chris Whitehouse wrote:
Anton Shterenlikht wrote:
I sent a query to ImageMagick port maintainers about this.
I'm getting errors while trying to upgrade to
ImageMagick 6.4.1.5 on FreeBSD 7.0-release.
Below are the error messages and my ImageMagick
On Mon, 16 Jun 2008 17:45:37 +0200 (CEST), Oliver Fromme
[EMAIL PROTECTED] wrote:
http://www.secnetix.de/tools/porgle/
Thanks guys for the suggestions.
___
freebsd-questions@freebsd.org mailing list
Ryan Coleman wrote:
Jun 4 23:02:28 testserver kernel: ar0: 715425MB HighPoint v3
RocketRAID RAID5 (stripe 64 KB) status: READY
Jun 4 23:02:28 testserver kernel: ar0: disk0 READY using ad13 at
ata6-slave
Jun 4 23:02:28 testserver kernel: ar0: disk1 READY using ad16 at
ata8-master
Jun 4
I can, as usual, highly recommend M5 Hosting. Mike (the owner) is VERY
helpful and he is very knowledgeable in *BSD - a lot of hosts will
install it, but few know how to use it. His hardware is good and he
uses AMCC (3Ware) cards for RAID. The network rocks.
I can also say I have had decent luck
Hi All,
I'm trying to find the equivilents for Linux's schedule() and
set_task_state(TASK_RUNNING).
Does anybody have a tip?
Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Steve Bertrand writes:
I am not in any which way certain changing major revision numbers
will affect the file system in any which way. I am also not very
knowledgeable in regards to inodes, but I do know that they can
run out before disk space does.
It is my understanding that
Steve Bertrand writes:
I am not in any which way certain changing major revision numbers
will affect the file system in any which way. I am also not very
knowledgeable in regards to inodes, but I do know that they can
run out before disk space does.
It is my understanding that
Well yes, this is precisely the reason why we use a SIGHUP (equivalent to
apachectl restart) instead of a SIGUSR1 (apachectl graceful). We don't
really care about a few broken client connections since the logs are rotated
at a quiet time.
Of course, YMMV.
Yes, of course :)
regards,
Ruben
We still have Samba R3.0.28a in the ports but regarding to CVE-2008-1105
shouldn't it be R3.0.30?
Regards,
Oliver
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Hello Folks:
I've done a lot of Googling and scouring the lists about this
particular subject so I apologize for rehashing it. However, I'm
still confused on what's the best way to perform BSD cross platform
builds. Ideally what I want to have is an environment whereby I can
build a 6.1-RELEASE
Mr Y wrote:
Hi All,
I'm trying to find the equivilents for Linux's schedule() and
set_task_state(TASK_RUNNING).
Does anybody have a tip?
I would start perhaps in kern/kern_sync.c and mi_switch() which will request
that a new process be scheduled (sched_switch in either 4BSD or ULE
On Mon, Jun 16, 2008 at 11:45 AM, Oliver Fromme [EMAIL PROTECTED] wrote:
Gilles [EMAIL PROTECTED] wrote:
Currently, to find where a software is located under /usr/ports/, I
rune the find command. Is there a database that I could query
instead so that it gives out the whole path to that
On Thu, Jun 19, 2008 at 09:41:01AM +0100, Anton Shterenlikht wrote:
On Wed, Jun 18, 2008 at 08:23:20PM +0100, Chris Whitehouse wrote:
Anton Shterenlikht wrote:
I sent a query to ImageMagick port maintainers about this.
I'm getting errors while trying to upgrade to
ImageMagick 6.4.1.5
I recently had this happen to me on an 8 x 1 TB RAID-5 array on a
Highpoint RocketRAID 2340 controller. For some unknown reason two drives
developed unreadable sectors within hours of each other. To make a long
story short, the way I fixed this was to:
Not FreeBSD related, so you
--On Thursday, June 19, 2008 02:28:31 -0400 Steve Bertrand [EMAIL PROTECTED]
wrote:
Paul Schmehl wrote:
--On June 18, 2008 11:59:49 PM -0400 Sahil Tandon [EMAIL PROTECTED] wrote:
Also, what is the output of 'df -i /var'?
# df -i /var/
Filesystem 1K-blocksUsed Avail Capacity
Dear newsgroup,
I accidentally stumbled over an article that allegedly describes how to
make your own kernel module for FreeBSD7 and felt an urge to share this.
The article can be found and downloaded at www.freesoftwaremagazine.com.
/Roger
___
Hi there,
Roger Olofsson:
Dear newsgroup,
I accidentally stumbled over an article that allegedly describes how to
make your own kernel module for FreeBSD7 and felt an urge to share this.
The article talks about ULE scheduler. Would you recommend using it
against SCHED_4BSD in this
Should I build ports/lang/perl5.8 WITH_THREADS=yes ?
I run FreeBSD-7.0-stable on old compaq armada1700 laptop.
I don't use perl myself much, but many ports I use rely on it.
How will this affect performance of perl on my laptop?
More to the point, are there any ports which require perl with
Hi Anton.
I'm no expert here, but I found that installing perl
without threads works for the vast majority of ports.
In one occasion I needed to recompile perl with thread
because another port required so.
Also, I remember that using WITH_THREADS=yes came together
with a warning that it could
I'm setting up a pair of machines with almost identical OS config, and
completely identical hardware. One is a primary DNS server, the other is
secondary. NS1 will also serve web, NS2 will be a mail server. Both are low
volume/loads.
It looks like I can use DD to copy an entire drive, but
Zbigniew Szalbot skrev:
Hi there,
Roger Olofsson:
Dear newsgroup,
I accidentally stumbled over an article that allegedly describes how
to make your own kernel module for FreeBSD7 and felt an urge to share
this.
The article talks about ULE scheduler. Would you recommend using it
On Jun 19, 2008, at 9:40 AM, Paul Schmehl wrote:
As you can see from the df -i I posted (to which you responded),
inode exhaustion is not an issue.
You are probably right about that, but could you also post the result of
sudo tunefs -p /var
That won't tell us what is in use, but it will
that's going to take a really long time (especially since it's brand new with
no data besides base OS).
My question: Is there a better way to duplicate a drive including boot info?
make same partitions, same newfs, copy files and then bsdlabel -B disk
Brad Mettee
PC HotShots,
On Thu, Jun 19, 2008 at 12:08:34PM -0400, Brad Mettee wrote:
I'm setting up a pair of machines with almost identical OS config, and
completely identical hardware. One is a primary DNS server, the other
is secondary. NS1 will also serve web, NS2 will be a mail server. Both
are low volume/loads.
Sahil Tandon writes:
Maxim Khitrov [EMAIL PROTECTED] wrote:
I'm currently with JohnCompanies. Overall, it's been a positive
experience, though I wish they offered FreeBSD 7. Beta testing for it
was supposed to begin last month, but so far no news.
+1 for JC. The tech support
On Thu, Jun 19, 2008 at 12:08:34PM -0400, Brad Mettee wrote:
I'm setting up a pair of machines with almost identical OS config, and
completely identical hardware. One is a primary DNS server, the other is
secondary. NS1 will also serve web, NS2 will be a mail server. Both are low
the libvirt stuff might be a clue, a while back I designed a virtual
system using libvirt and some ported linux code, which basiclaly acted
as an enhanced chroot for apache, ftp, mail, pop3, imap. also NTT has a
derivitive version of FreeBSD with hints at virtualization, im waiting
for our Verio
* Maxim Khitrov [EMAIL PROTECTED] [2008-06-18 22:37:13+]:
Is anyone here using RootBSD?
I am using both RootBSD and JohnCompanies.
I'm currently with JohnCompanies. Overall, it's been a positive
experience, though I wish they offered FreeBSD 7. Beta testing for it
was supposed to begin
--On Thursday, June 19, 2008 11:09:57 -0500 Jeffrey Goldberg
[EMAIL PROTECTED] wrote:
On Jun 19, 2008, at 9:40 AM, Paul Schmehl wrote:
As you can see from the df -i I posted (to which you responded),
inode exhaustion is not an issue.
You are probably right about that, but could you also
Paul Schmehl wrote:
I'm leaning toward some sort of bug in mysql version 5.0.51 which
creates a temporary file (in the wrong place) and then doesn't
release it until it exhausts the space on the drive. In any case,
I'm going to report it to the mysql folks as such and hope they can
figure
On Wed, 18 Jun 2008 17:23:26 -0400
John Almberg [EMAIL PROTECTED] wrote:
Do you have PF installed? pftop is a quick way to see what's
happening on the network interface.
thanks john that's a good utility!
also, thanks bill for the explanation of the ssh problem.
we've found the problem we
On Thu, Jun 19, 2008 at 12:29 PM, George Hartzell [EMAIL PROTECTED] wrote:
Sahil Tandon writes:
Maxim Khitrov [EMAIL PROTECTED] wrote:
I'm currently with JohnCompanies. Overall, it's been a positive
experience, though I wish they offered FreeBSD 7. Beta testing for it
was
in short: has anybody been able to get it working from ports?
in here:
[EMAIL PROTECTED]:~ # uname -srm
FreeBSD 7.0-RELEASE i386
[EMAIL PROTECTED]:~ # cd /usr/ports/games/fretsonfire
[EMAIL PROTECTED]:/usr/ports/games/fretsonfire # make install clean
=== Installing for fretsonfire-1.2.451_2
===
It might be nice if the RootBSD people answered their email inquiries, i
know they have lost customers, me for one for not answering a simple
email
On Thu, 2008-06-19 at 13:35 -0400, [EMAIL PROTECTED] wrote:
* Maxim Khitrov [EMAIL PROTECTED] [2008-06-18 22:37:13+]:
Is anyone here using
--On Thursday, June 19, 2008 20:02:59 +0200 Peter Boosten [EMAIL PROTECTED]
wrote:
Paul Schmehl wrote:
I'm leaning toward some sort of bug in mysql version 5.0.51 which
creates a temporary file (in the wrong place) and then doesn't
release it until it exhausts the space on the drive. In
Paul Schmehl wrote:
--On Thursday, June 19, 2008 20:02:59 +0200 Peter Boosten
[EMAIL PROTECTED] wrote:
Paul Schmehl wrote:
I'm leaning toward some sort of bug in mysql version 5.0.51 which
creates a temporary file (in the wrong place) and then doesn't
release it until it exhausts the
On 2008-06-19, Gonzalo Nemmi [EMAIL PROTECTED] wrote:
in short: has anybody been able to get it working from ports?
in here:
[EMAIL PROTECTED]:~ # uname -srm
FreeBSD 7.0-RELEASE i386
[EMAIL PROTECTED]:~ # cd /usr/ports/games/fretsonfire
[EMAIL PROTECTED]:/usr/ports/games/fretsonfire # make
Brad Mettee wrote:
I'm setting up a pair of machines with almost identical OS config, and
completely identical hardware. One is a primary DNS server, the other is
secondary. NS1 will also serve web, NS2 will be a mail server. Both are
low volume/loads.
It looks like I can use DD to copy an
(Sorry, I replied to Yuri only by mistake)
On Thu, Jun 19, 2008 at 10:49 AM, The MadDaemon [EMAIL PROTECTED] wrote:
On Tue, Jun 17, 2008 at 3:47 PM, Yuri Pankov [EMAIL PROTECTED] wrote:
The MadDaemon wrote:
List,
I'm having a problem with a dual-homed host running 7.0-RELEASE with
regards
Hi,
I'm using FreeBSD 7.0 version and expecting some problems with jail.
/etc/rc.d/jail script hangs when it try to map jail's interface to alias
address of my nic. Script successfully starting if i removing alias
address from rc.conf(or manually via ifconfig). Any info will be
helpful.
On Thursday 19 June 2008 16:07:48 Jona Joachim wrote:
On 2008-06-19, Gonzalo Nemmi [EMAIL PROTECTED] wrote:
in short: has anybody been able to get it working from ports?
in here:
[EMAIL PROTECTED]:~ # uname -srm
FreeBSD 7.0-RELEASE i386
[EMAIL PROTECTED]:~ # cd
On Thu, 19 Jun 2008, Brad Mettee wrote:
I'm setting up a pair of machines with almost identical OS config, and
completely identical hardware. One is a primary DNS server, the other is
secondary. NS1 will also serve web, NS2 will be a mail server. Both are low
volume/loads.
It looks like I
Seeing the question:
Is anyone here using RootBSD?
At 10:55 AM +0700 6/19/08, OutBackDingo wrote:
I was going to go with them for their XEN based hosting, but i sent
them an email, asking a couple questions, they never replied, so
went with Verio instead
I notice the rootbsd guys did a
At 10:37 PM -0400 6/18/08, Maxim Khitrov wrote:
On Wed, Jun 18, 2008 at 9:27 PM, cpghost [EMAIL PROTECTED] wrote:
On Thu, 19 Jun 2008 10:31:31 +1000
Greg 'groggy' Lehey [EMAIL PROTECTED] wrote:
I'm looking for somebody to host some web sites for me. Ideally I'd
like a complete machine,
Anton Shterenlikht wrote:
On Wed, Jun 18, 2008 at 08:23:20PM +0100, Chris Whitehouse wrote:
Anton Shterenlikht wrote:
I sent a query to ImageMagick port maintainers about this.
I'm getting errors while trying to upgrade to
ImageMagick 6.4.1.5 on FreeBSD 7.0-release.
Below are the error
On Thu, 19 Jun 2008 08:51:40 +0300, Manolis Kiagias [EMAIL PROTECTED] wrote:
Good point. I'm too sleepy right now (the coffee hasn't started kicking
in yet from a very early wake up), but it would be nice if we also added
a note to the article saying that it is important to have the correct
can I use G4U to clone a 40 gig drive to a 30 gig drive, if the source
drive only has 20 gigs of data?
Jean-Paul Natola
Network Administrator
Information Technology
Family Care International
588 Broadway Suite 503
New York, NY 10012
Phone:212-941-5300 xt 36
Fax: 212-941-5563
2008/6/19 David Robillard [EMAIL PROTECTED]:
Well yes, this is precisely the reason why we use a SIGHUP (equivalent to
apachectl restart) instead of a SIGUSR1 (apachectl graceful). We don't
really care about a few broken client connections since the logs are
rotated
at a quiet time.
2008/6/20 Agus [EMAIL PROTECTED]:
2008/6/19 David Robillard [EMAIL PROTECTED]:
Well yes, this is precisely the reason why we use a SIGHUP (equivalent
to
apachectl restart) instead of a SIGUSR1 (apachectl graceful). We don't
really care about a few broken client connections since the logs
On Thu, 19 Jun 2008, O. Hartmann wrote:
We still have Samba R3.0.28a in the ports but regarding to CVE-2008-1105
shouldn't it be R3.0.30?
As far as I know the mentioned security patch gets applied when building
Samba from ports.
Best regards
Konrad Heuer
GWDG, Am Fassberg, 37077
57 matches
Mail list logo
