).
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann
the following line, so you
don't have to install any additional allow rules:
optionsIPFIREWALL_DEFAULT_TO_ACCEPT
That's especially useful if you want to use IPFW for
forwarding only, and use another software for actual
packet filtering (i.e. pf or ipf).
Best regards
Oliver
--
Oliver Fromme
ifconfig and netstat -rnfinet.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758
the complete list of
rules.
Otherwise, it might help to run tcpdump(1) on the host, so
you can see the actual packets that are transmitted and
received.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA
be
important if that kind of grep command is run very often
by a script, or if it's run on very large files.
My guess is that one large regular expression is more
efficient than many small ones. But I haven't done real
benchmarks to prove this.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH
hits, but it's not difficult to narrow it down
from there.
Also, is p5-Tk the same as Perl/Tk?
I think so.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix
router_enable=YES
Remove both. You don't need either of those.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister
Brice ERRANDONEA berrando...@yahoo.fr wrote:
Oliver Fromme wrote:
sysctl security.jail.allow_raw_sockets=1
I did it but ping still doesn't work.
Which IP address are you using for the jail now?
If you're using 127.0.0.1, you can only ping the host's
own IP addresses, because packets
it will be less because no UPS has 100% efficiency.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf
was correctable (e.g. with ECC mechanisms), so it is
not fatal yet.
Do you overclock that processor? Did you check that the
cooling is sufficient? I.e. check the fan, remove dust
etc.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M
Paul Lambert eb30...@gmail.com wrote:
Oliver Fromme wrote:
Paul eb30...@gmail.com wrote:
Thanks Oliver
I can just get the i386 vmware version and should install and run.
Last question is there a x86_64 bit Linux module?
No, unfortunately x86_64 linux binaries
try asking in the
freebsd-emulat...@freebsd.org mailing list.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister
).
But I'm afraid this is the smallest of the problems.
I suspect you won't be able to get this script to run
correctly on FreeBSD, because it seems to do too many
linux-specific things.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M
the shell with -vx. Then it prints the script as it
is being parsed, and additionally each command is printed
after expansion.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung
.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann
contents, do this:
$ recode utf8..iso8859-15 old.txt new.txt
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf Gebhart
seem to be ready yet.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758
Randi Harper wrote:
/ = 1GB
/var = 2GB
/tmp = 2GB
Depending on the size of installed RAM, /tmp could also
be a memory disk by default. I do that on all of my
machines. I never have /tmp physically on disk anywhere.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG
Roland Smith wrote:
Oliver Fromme wrote:
Quote from the manpage:
The devfs.rules file provides an easy way to create and apply
devfs(8) rules, even for devices that are not available at boot.
The rules take effect whenever a new node (devide) appears,
even after devfs
Warren Block wrote:
Oliver Fromme wrote:
Gary Kline wrote:
Whenever I save a wordpeocessoe file [OOo, say] into a
text file, I get a slew of hex codes to indicate the char to be
used. I'm looking for a perl one-liner or script to translate
hex back into ', , -- [that's
Warren Block wrote:
Oliver Fromme wrote:
Warren Block wrote:
Oliver Fromme wrote:
Gary Kline wrote:
Whenever I save a wordpeocessoe file [OOo, say] into a
text file, I get a slew of hex codes to indicate the char to be
used. I'm looking for a perl one-liner
Aryeh M. Friedman wrote:
Oliver Fromme wrote:
Roland Smith wrote:
But one has to run '/etc/rc.d/devfs restart' for newly added rules to
take
effect! (or reboot the system, which is overkill).
Yes, of course. I thought that was obvious.
Maybe I whould add
or none at all.
If you want to see the amount of accumulated traffic (i.e.
since boot) per interface and per IP address, the commands
netstat -i and netstat -ib will tell that (in packets
and in bytes, respectively).
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29
problem with that daemon.
If it listens on all interfaces (*), then the problem
is somewhere else, e.g. a packet filter (on the server or
client side, or somewhere between), or maybe a typo when
starting the client (wrong port number or address).
Best regards
Oliver
--
Oliver Fromme, secnetix
-Buw (sed 's/#.*//' GENERIC) (sed 's/#.*//' MYKERNEL)
I think bash has a similar feature, but I don't know the
syntax, so please see the manpage if you're a bash user.
If you need to do that oftem, it's worth to create an alias
or shell function.
Best regards
Oliver
--
Oliver Fromme, secnetix
that the
developers of the NIC drivers aren't always reading the
questions@ mailing list.
Thank you very much!
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf
processes are
running, then perform the start.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB
that remotely without single user mode, but it's
always better to be prepared to have access to the console.
And of course, you should always have good backups. A RAID
is never a substitute for a backup.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M
,
but for building ports I recommend to use a separate jail
anyway, create packages and pkg_add them in the actual
webserver jail.
Just my 2 cents.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606
is currently not available.
Yeah, when the trace aborts, it is still executing the
su binary. It doesn't get as far as actually trying to
execute the shell.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen
the umask
at the default of 022, unless you specifically know that
you need a different one for a certain installation.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung
, it will not
be completely without a trace. As soon as you connect
to the SMTP port, it might cause an entry in that
server's logfile, even before entering any SMTP command.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht
for DJNA-3x
The maintenance mode is described in chapter 10.12 (page 99).
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH
an account and voting on the link below =D
http://bugs.adobe.com/jira/browse/FP-1060
There's no way I'm going to create an account at Adobe
and give them my personal data. No thanks.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister
it (i.e. use the -F option). This one should work:
awk -F';' '$3 ~ /^[a-z]{5}$/ {print}' file
If that still doesn't work for you, please specify your
file format more exactly, and provide an example of the
input lines.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz
authentication,
server aliases (via ~/.ssh/config) etc. You can also use
other file copy tools (such as cpdup) that can be tunneled
through ssh.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606
configuration. If you don't have it, try to load
the module: kldload cpufreq
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH
(501.14-MHz 686-class CPU)
Origin = GenuineIntel Id = 0x673 Stepping = 3
Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
I'm afraid this one does not support CPU frequency control.
Best regards
Oliver
--
Oliver Fromme, secnetix
controller
through the serial port.
Well, it's not hard or complicated, but it requires a certain
amount of knowledge. First you have to learn C programming.
Then you have to learn about the termios(4) interface and
related things.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG
/sbin.
It's unlikely that a port requires a different command with
the same name without having a dependency on the port that
provides that command.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA
, it all adds up.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer
instance detects
data corruption (if integrity verification is enabled).
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH
Robert Huff wrote:
Oliver Fromme writes:
I'm not sure why there's so much depenencies, but if anyone wants
me to post it, I want to know.
Because OOo declines to re-invent the wheel? Some of these are
easy to understand if you know almost nothing about
it is right order.
No, there is no right or wrong order. It depends on
what features of gmirror and geli you want to exploit.
See my more detailed explanation in this thread.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister
Richard DeLaurell wrote:
Oliver Fromme wrote:
PS: To check the consistency of your package database,
you can use this small script (requires Python):
http://www.secnetix.de/olli/scripts/pkg_check_dependencies
If you get no output from pkg_check_dependencies -q,
then your
to create
simple dialogs (Such as OK / Cancel) that can be used
from shell scripts.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH
(requires Python):
http://www.secnetix.de/olli/scripts/pkg_check_dependencies
If you get no output from pkg_check_dependencies -q,
then your dependencies are good.
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606
or Novell Netware
that looked _really_ weird. These are not supported
by omi, I'm afraid.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch
).
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik
certain
you won't need the driver. I'm surprised that it still
exists today in Xorg at all.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch
. Also, I don't see any specific
exceptions concerning kernels for amd64 in the release
build scripts (/usr/src/release).
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung
that, by default, it tries to synchronize the local
dir perfectly, i.e. if the remote dir is empty, it will
wipe out the local dir. (The option -P 0 will prevent
omi from removing anything.)
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann
are large and you
can't afford the fsck time, consider using ZFS, which
has a lot of benefits besides not requiring fsck.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix
, such as perl error messages,
exception traces from Python programs (usually multiple
lines each), and so on.
There is no simple way to reliably parse and analyze all
of that completely automatically.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M
plan to do any fancy 3D stuff on it. Power consumption
should be as low as possible.
Any recommendations?
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix
partition at the boot0 prompt.
So it is really a good idea to switch the partitions in
the label before putting that disk into production.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606
nice if it ignored incompatible libraries :)
No. Please don't put such pseudo-cleverness into rtld.
It wouldn't be an improvement, in fact it might break some
working configurations.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M
be considered a bug that
-f /var/db/ntpd.drift is included in the default
flags. If someone wants to override the default
location of the drift file, it is much better to
specify it in the ntp.conf file.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M
really doesn't matter.
Just make sure that your root file system is partition a.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH
Oliver Fromme [EMAIL PROTECTED] wrote:
Matthew Seaman wrote:
Mel wrote:
that's aside from the fact that the root partition '/' always has to be
the
first partition, for the simple reason that everything else is mounted
on top
of it.
It's not the partition device
be a good
start.
Best regards.
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer
whether your version of
that NIC is already covered, or whether it has a
product ID that the driver doesn't know about yet.
As far as I can tell from the repository history,
the driver is well maintained.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing
entry.
There can be other reasons on occasion, but those three are
the most common ones. Simply look at the STAT column in
the ps(1) output for the process in question. It will tell
you the reason why the process is stuck.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz
Dánielisz László wrote:
What is your favorite disk writer utility? (under X)
cdrecord for CDs, growisofs for DVDs. (in an xterm)
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606
specialized tool
in C.
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann, Olaf
of problems). Also, MySQL runs faster when compiled for
64bit.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht
Kevin Monceaux wrote:
Oliver Fromme wrote:
How would you like this one?
http://www.secnetix.de/olli/FreeBSD/vloader/screenshot5.png
(It's work in progress. See the latest FreeBSD Quarterly Status
Report.)
When I recently came across info on the graphical boot loader
:
Size of sed: 27 KB.
Size of perl + libperl: 1126 KB
Thats more than 40 times bigger.
Of course, YMMV.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung
in a safe deposit box at your bank company), so you
still have a good backup if your house burns down or an
alien space ship crashes on it.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606
Its good to see my old friend back where he belongs
How would you like this one?
http://www.secnetix.de/olli/FreeBSD/vloader/screenshot5.png
(It's work in progress. See the latest FreeBSD Quarterly
Status Report.)
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29
), I think.
Using xhost(1) is much easier, but it's insecure. On the
other hand you're using rsh and a public network socket
to connect to, so everything you do is insecure anyway.
I hope you're going to make your users aware of that.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co
Ivan Voras wrote:
Oliver Fromme wrote:
enom-FBSD1 [EMAIL PROTECTED] wrote:
beastie_disable=NO had no effect.
That's because NO is already the default. Setting it
to YES will completely disable the whole boot menu.
All that was needed was loader_logo
=65534(nobody) gid=65534(nobody) groups=65534(nobody)
rtprio: realtime priority 31
#
This is on 7-stable (a few months old, though).
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606
usage information.
So you can do things like this:
$ tail -f /var/log/maillog | bold -l myhost.mydomain
(The -l option specifies to highlight the whole line,
not just the part that matches.)
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M
between hosts B and C?
Using ssh would solve all of the problems at once.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister
Matias Surdi wrote:
Oliver Fromme escribió:
Matias Surdi wrote:
Oliver Fromme escribió:
Matias Surdi wrote:
# echo $BINMAKE
`if [ -x /usr/obj/usr/src/make.i386/make ]; then echo
/usr/obj/usr/src/make.i386/make; else echo make; fi` -m
/usr/src/share/mk
to find and clean up afterwards. Been
there, done that, a thousand times.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister
of the above command read from stdin and write
to stdout, so you can use shell redirection to read from
a file and/or write to a file. There is no need to use
cat(1).
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht
that hassle in the
first place. I'd recommend you buy a new drive and
save you some hours of work, a bunch of hairs turning
grey, and some swearing.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA
place? Allthough I've been using
FreeBSD since 4.0, it seems that I got a little stupid over
the years... :-/
It's a loader tunable, so you must put it in /boot/loader.conf.
Best regards, and good luck with your recovery!
Oliver
PS: Better make good backups next time.
--
Oliver Fromme
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf Gebhart
it, I'm afraid.
You should either use UFS with gjournal, or use ZFS.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister
upload it somewhere and
tell us the URL.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB
echo $BINMAKE`
By the way, this has nothing to do with bash. Those things
work with every bourne shell, including FreeBSD's /bin/sh.
It even works with Solaris' /bin/sh which is very far from
a POSIX shell. :-)
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567
Matias Surdi wrote:
Oliver Fromme escribió:
Matias Surdi wrote:
# echo $BINMAKE
`if [ -x /usr/obj/usr/src/make.i386/make ]; then echo
/usr/obj/usr/src/make.i386/make; else echo make; fi` -m /usr/src/share/mk
I'd like to have a second variable like:
[code]
# echo
development by Hans Petter Selasky. I'm not
sure when it will be committed to 8-current, but I think
it's pretty much ready. It will certainly fix some of
the problems people are seeing with the old USB stack.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b
if you need to get the exit code
of some parts of the pipe except the last one. You didn't
ask for that, though. :-)
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix
Christopher Joyner wrote:
Is there some way of doing that? Running i386 software on amd64 machine?
Yes. FreeBSD/amd64 contains a compatibility facility
for i386 binaries. It should just work out of the box,
unless disabled explicitly.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf
library, then that library must be i386, too.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen
to provide further assistance.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf
want
to use file semantics (with read() and write() methods etc.),
you can easily do that in Python with memory objects, too.
See the StringIO and cStringIO modules for details.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister
regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann, Olaf Erb
allows replication
between local and/or remote file systems. So, yes, it
is intended to support clustering.
Clustering and SSI is the main goal of DragonFly BSD,
after all.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister
be the only
device on its channel, i.e. no slave, in the PATA case.)
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister
1 - 100 of 227 matches
Mail list logo