It'll be in loader.conf, actually. That's also a fine place
to load modules. :)
- Jordan
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
On Sunday 11 March 2001 15:47, Michael Conlen wrote:
Check your pam.conf. I've seen at least two problems with this recently.
I'm
having all sorts of PAM issues with ssh.
Check your log files, if you get a message about having problems finding a
module for it then that's probably it.
Bit more information. pccardc dumpcis gives...
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: dc 00 ff
Common memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 100nS, Memory block size = 512b, 1
On Thu, 15 Mar 2001, Dinesh Nair wrote:
base problem is i cant get konqueror to make https: connections. following
the faq at www.konqueror.org, i explicitly included --with-ssl in
/usr/ports/x11/kdelibs2/Makefile and /usr/ports/x11/kdebase2/Makefile and
rebuilt and reinstalled both
On Tue, Mar 13, 2001 at 05:33:58PM +0100, Torben Baecker wrote:
| make buildworld
| make buildkernel KERNCONF=JUPITER
| make installkernel KERNCONF=JUPITER
| ...
|
| Is this correct?
|
| jm
|
| Hi,
|
| make buildworld
| make kernel KERNCONF=JUPITER
|
| that's all
Cool. Then you
On Tue, 13 Mar 2001, Jordan Hubbard wrote:
Since there has been a sudden spate of changes post-BETA (not a huge
number, but more than the usual amount in -stable since the freeze)
I decided it would be a good idea to roll a BETA2 snapshot, and
it's now on:
On Tue, 13 Mar 2001, Torben Baecker wrote:
make buildworld
make kernel KERNCONF=JUPITER
So this new procedure replaces the old?
Can one put the KERNCONF variable on /etc/rc.conf and just do "make
kernel"
Where is this explained in /usr/src/UPDATIN?
To Unsubscribe: send mail to [EMAIL
Francisco Reyes wrote:
On Tue, 13 Mar 2001, Torben Baecker wrote:
make buildworld
make kernel KERNCONF=JUPITER
So this new procedure replaces the old?
Can one put the KERNCONF variable on /etc/rc.conf and just do "make
kernel"
Where is this explained in /usr/src/UPDATIN?
You
You can put the KERNCONF variable in /etc/make.conf and just do "make
kernel", yes.
--Andy
-Original Message-
From: Francisco Reyes [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 15, 2001 7:38 AM
To: Torben Baecker
Cc: j mckitrick; [EMAIL PROTECTED]
Subject: Re: New KERNCONF option
On Thu, 15 Mar 2001, Francisco Reyes wrote:
On Tue, 13 Mar 2001, Jordan Hubbard wrote:
How can I make a bootable CD from this?
Could not find anything on the archives, FAQ or handbook.
I know how to create disk from ISO images, but last I tried the CD was not
bootable.
The line I use to
Drat. There it is; you've got a command that looks like it's stuck in
the adapter.
try changing the value of TWE_Q_LENGTH in /sys/dev/twe/twereg.h to 100 and
see if you can reproduce it.
Well, I just woke up and mysqd was stuck again in getblk, this time with a
TWE_Q_LENGTH of 100:
db
On Wed, Mar 14, 2001 at 10:14:15AM -0800, Sean Chittenden wrote:
| I've done this upgrade a few times and tried going from 3.4 -
| 4.X: not so smooth. In fact, big sink whole for time, however, 3.4 -
| 3.5-STABLE - 4.X works very nicely. Having spent a chunk of time
Does anyone know what
Long, Scott [EMAIL PROTECTED] (15 Mar 2001 17:48 +0100):
Do you have the 'PnP OS' option turned off in the BIOS?
Alas, there appears not to be any such option in the BIOS. I should
also mention that this is a Toshiba Satellite 1710CDS, with PhoenixBIOS
4.0 Release 6.0 Ver 1.03A.
--
Steven
I searched the mailing list archives for the answer to this, and found
there the same question but no answer--just evaluations of Perl5.6. So
is there some expectation of having 5.6 in stable soon, or in 4.3 release?
None. It's far too late for that. :)
- Jordan
To Unsubscribe: send mail
On Wed, Mar 14, 2001 at 03:07:21PM -0800, David O'Brien wrote:
On Tue, Mar 13, 2001 at 11:45:12PM -0800, David O'Brien wrote:
The Alpha version is now available at
ftp://ftp.freebsd.org/pub/FreeBSD/releases/alpha/4.3-BETA-20010313
I'll roll and ISO and copy it up ASAP.
Alpha
From: "Dinesh Nair" [EMAIL PROTECTED]
one a related note, though i've got most of the files in /usr/lib dated
March 7, 2001, a few of them are still dated July 28, 2000 as per the
4.1-RELEASE i installed of the cd sets. as some of these include rsaref
and libssl_p.a libraries, i was wondering
Yes, I'm sure that's it. Another problem with coming from the Linux
world and getting used to the new way of doing things.
The handbook suggested that the easiest way to cvsup was to use
# pkg_add -f \
On Thu, Mar 15, 2001 at 11:14:05PM -0500, The Babbler wrote:
Am I reading the wrong section of the handbook?
Should I be reading something else entirely?
a full system upgrade (make world, as it's often called) isn't nearly as hard
with freebsd as it often is in the linux world.
first, use
I cvsuped to 4.3-BETA, ran make world and compiled my kernel and ran mergemaster.
but when i rebooted and try to play mp3s with mpg123 they play really fast and if i
use "play" to play a .wav or cat a .au file into /dev/audio the sounds get
cut off before the end.
I'm using the old sound
** Mike Tancsa [EMAIL PROTECTED] on Thu, 15 Mar 2001 14:33:29 -0500
** in [Re: 3ware problems ] writes:
Mike I tried yesterday to stress the machine with 25 simultaneous
Mike bonnie -s 500
Mike Although the machine was sluggish, it still worked. Similarly,
Mike make -j12 buildworld worked. In
On Thu, Mar 15, 2001 at 04:13:33PM -0600, Stephen wrote:
I've just installed 4.3-BETA2 and compiled a custom kernel with IPv6
disabled and have nothing IPv6 related in /etc/rc.conf. I'm noticing slow
telnet and fetch connect times, and after snooping with Ethereal, found
that it's trying to
On Thu, Mar 15, 2001 at 11:14:05PM -0500, The Babbler wrote:
In fact the section of the handbook at
http://www.freebsd.org/handbook/synching.html
says quite explicitly that you can get only the parts you want.
Might be a good clarification for the handbook that though it's a nice
I got a mail from bento about a compiler problem in one of my ports,
see [1], but I can't reproduce it on any of my -STABLE machines (which
are about a month old).
It seems that something has broken /usr/include/sys/socket.h for C++
somewhere between my last update (which is 1.39.2.3) and
On Thu, 15 Mar 2001, Stephen wrote:
that it's trying to resolve my FQ hostname via DNS with a type ''
(IPv6?) before falling back to type 'A'. 4.2-R doesn't appear to do this.
i saw this with sendmail when i bumped up to 4.3R. the fix there was to
recompile sendmail without IPv6.
In message [EMAIL PROTECTED], "Andrew Reilly"
writes:
On Wed, Mar 14, 2001 at 01:31:16AM -0800, Jordan Hubbard wrote:
I'm just testing the 4.3-BETA2 on my standard scratchbox (a dual PIII/500
with two 9.1GB Quantum drives) and with the latest BETA build, I'm
seeing an unusual problem
25 matches
Mail list logo