So, please, someone, somewhere, share a success story, where you're
using FreeBSD, ZFS, and HAST. Let me know that it does work. I'm
starting to lose faith in my abilities here. :(
I ran our main database for the old company using ZFS on top of HAST
without any problems at all. Had a single
On Thu, Mar 24, 2011 at 01:36:32PM -0700, Freddie Cash wrote:
I've tried with FreeBSD 8.2-RELEASE, 8-STABLE, 8-STABLE w/ZFSv28
patches, and 9-CURRENT (after the ZFSv28 commit). Things work well
until I start hastd. Then either the system locks up, or hastd causes
a kernel panic, or hastd
- Original Message -
From: Jeremy Chadwick free...@jdc.parodius.com
Was there any conclusion from this guys, was there a bad disk
causing the issue?
Regards
Steve
This e.mail is private and confidential between Multiplay (UK) Ltd.
hi everybody,
I've got FreeBSD running:
FreeBSD foobar.domain 8.2-STABLE FreeBSD 8.2-STABLE
with our LSI 9200 SAS :-)
thanks to Rumen, Jeremy and you :-)
zpool with two raidz:
root@iscsihead-m:/[-bash]# zpool create bigPool raidz da0 da1 da2 da3
da4 raidz da6 da7 da8 da9 da10 spare da5
On 3/25/2011 6:29 AM, Steven Hartland wrote:
- Original Message - From: Jeremy Chadwick
free...@jdc.parodius.com
Was there any conclusion from this guys, was there a bad disk
causing the issue?
You mean this old thread ?
- Original Message -
From: Mike Tancsa m...@sentex.net
I would say probably the disk mostly. Perhaps a driver or firmware bug
on the Areca. Hard to say. The drive totally failed a month or so
later. Also, moved to a later firmware on the areaca controller after
that and all has
On Fri, Mar 25, 2011 at 5:28 AM, Denny Schierz linuxm...@4lin.net wrote:
So, how complicated is load balancing with two Gb Network cards? :-) Ok,
that should be a new thread;-)
Simple as pie. Read through lagg(4) to see how it's done from the
command-line using ifconfig(8).
Then you put the
On Fri, Mar 25, 2011 at 01:59:01PM -, Steven Hartland wrote:
- Original Message - From: Mike Tancsa m...@sentex.net
I would say probably the disk mostly. Perhaps a driver or firmware bug
on the Areca. Hard to say. The drive totally failed a month or so
later. Also, moved to a
Dear FreeBSD list,
I'm currently using FreeBSD on my backup server (w/ Amanda).
I'm wondering if exists out there a utility for setting tape parameters
(during boot).
Linux had /sbin/stinit and /etc/stinit.def.
Is there something similar for FreeBSD?
Another problem I'm experiencing is:
On Fri, 25 Mar 2011 14:50-, Attila Bogár wrote:
Dear FreeBSD list,
I'm currently using FreeBSD on my backup server (w/ Amanda).
I'm wondering if exists out there a utility for setting tape
parameters (during boot).
Linux had /sbin/stinit and /etc/stinit.def.
Is there something
- Original Message -
From: Jeremy Chadwick free...@jdc.parodius.com
I apologise in advance if I have already reviewed your situation, but if
you could please provide full smartctl -a output for the disk, I can
review the data to see if anything looks out of place.
An example: on some
Good job Denny,
I am happy to hear you made it work.
On Fri, Mar 25, 2011 at 7:38 AM, Freddie Cash fjwc...@gmail.com wrote:
On Fri, Mar 25, 2011 at 5:28 AM, Denny Schierz linuxm...@4lin.net wrote:
So, how complicated is load balancing with two Gb Network cards? :-) Ok,
that should be a new
On 3/25/2011 11:37 AM, Steven Hartland wrote:
I've raised this with their support as an issue with their areca-cli
utility so hopefully they will fix. Alternatively maybe smartctl will
add support for the areca under freebsd in the future.
Hopefully smartmontools will eventually work. It can
Hi Trond,
On 25/03/11 15:28, Trond Endrestøl wrote:
Have you tried using /dev/sa0.ctl? E.g.: mt -f /dev/sa0.ctl comp off
Thanks for your answer!
I can confirm, that mt -f /dev/sa0.ctl comp off just works without the
tape cartdridge loaded.
I'm currently using the same approach that you use
Hi,
If one has multiple entries in the SPD some representing more specific
network addresses not to be encrypted and sent over an
ipsec tunnel vs more general networks that would be encrypted would this
work?
In other words say I have a x.x.0.0/16 that should encrypted but in that
On 21/03/2011 12:23, Olaf Seibert wrote:
On my production system (still 8.1, I haven't had time yet to upgrade to
8.2) I have a ZFS. Nightly I make snapshots of each filesystem in it.
Suddenly, one of the file systems has no snapshots any more:
$ ls -l /tank/vol-fourquid-1/.zfs
ls: snapshot:
On Fri, Mar 25, 2011 at 8:47 AM, Rumen Telbizov telbi...@gmail.com wrote:
On Fri, Mar 25, 2011 at 7:38 AM, Freddie Cash fjwc...@gmail.com wrote:
On Fri, Mar 25, 2011 at 5:28 AM, Denny Schierz linuxm...@4lin.net wrote:
So, how complicated is load balancing with two Gb Network cards? :-) Ok,
On Fri, Mar 25, 2011 at 03:37:55PM -, Steven Hartland wrote:
- Original Message - From: Jeremy Chadwick
free...@jdc.parodius.com
I apologise in advance if I have already reviewed your situation, but if
you could please provide full smartctl -a output for the disk, I can
review
Hello,
I'm trying to setup a new geli disk and i'm seeing what looks like a memory
leak.
After initializing the device i've tried to do the dd command from /dev/random
like this one:
dd if=/dev/random of=/dev/da0p1.eli bs=1m
And i can see that wired memory is increasing and never released,
TB --- 2011-03-25 23:28:18 - tinderbox 2.6 running on freebsd-legacy.sentex.ca
TB --- 2011-03-25 23:28:18 - starting RELENG_7 tinderbox run for i386/pc98
TB --- 2011-03-25 23:28:18 - cleaning the object tree
TB --- 2011-03-25 23:28:30 - cvsupping the source tree
TB --- 2011-03-25 23:28:30 -
- Original Message -
From: Jeremy Chadwick free...@jdc.parodius.com
Bummer. Competitor's drivers make use of pass(4) and/or xpt(4), the
result being that you can see (and talk to directly) all the disks which
are on the RAID card. No need for a CLI utility getting in the way,
etc..
On 3/25/2011 9:28 PM, Steven Hartland wrote:
Interesting, camcontrol reports the following, so does that indicate it
may be possible to do this:
camcontrol devlist
Areca ARC-1220-VOL#00 R001 at scbus0 target 0 lun 0 (da0,pass0)
Areca RAID controller R001 at scbus0 target 16 lun
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 25 Mar 2011 13:10, demelier.david@ wrote:
On 21/03/2011 12:23, Olaf Seibert wrote:
On my production system (still 8.1, I haven't had time yet to upgrade to
8.2) I have a ZFS. Nightly I make snapshots of each filesystem in it.
Suddenly,
On Fri, Mar 25, 2011 at 09:55:23PM -0400, Mike Tancsa wrote:
On 3/25/2011 9:28 PM, Steven Hartland wrote:
Interesting, camcontrol reports the following, so does that indicate it
may be possible to do this:
camcontrol devlist
Areca ARC-1220-VOL#00 R001 at scbus0 target 0 lun 0
24 matches
Mail list logo
