On 19/10/2012 02:19 πμ, John Marshall wrote:
On 02/10/2012 02:08, George Mamalakis wrote:
On 04/07/11 14:08, George Mamalakis wrote:
On 06/04/2011 18:29, George Mamalakis wrote:
Dear all,
I installed mod_auth_kerb2 on my FreeBSD 8-STABLE machine and tried
to use it. After the installation
on 17/10/2012 23:51 Derek Kulinski said the following:
On Wed, Oct 17, 2012 at 11:38:57PM +0300, Andriy Gapon wrote:
I've found that on quite a few modern systems the ACPI platform advertises
some
useless thermal zones, which always return some hardcoded temperatures.
E.g. I have Asus
on 19/10/2012 16:27 Andriy Gapon said the following:
on 17/10/2012 23:51 Derek Kulinski said the following:
[snip]
I'm open to experimenting. It's kind of important to me, because I recently
had heating issue (that I hopefully fixed) and I wasn't aware of problems
until my system started
on 19/10/2012 00:07 Alex de Joode said the following:
Updated two 9.1-RC1 machines (both R210, dual GEOM MIRRORED disk)
1 went OK;
1 went belly up (see attachment) (after the 1st reboot)
There is no spoon^Wattachment.
Consider sending a link.
- Invalid format
-
https://sabotage.org/FBSD/FBSD-9.1RC2.jpg
Screen shot. Basicly the only diff between the two r210 are the disks,
one has 2x2TB (works) and the one that has 2x1Tb fails with the above error.
Both are sw/ mirrored. No hw/ raid and ACHI sata settings.
: -Original Message-
: From: Andriy
Guys/girls/etc,
I do suggest that someone actually spends some time coming up with a
table of what the current state is, what we could do, what would
happen if we did that.
Right now there's a lot of possibilities (new drive, drive with
windows, drive with linux, drive with linux/windows, drive
On 10/19/2012 1:32 PM, Adrian Chadd wrote:
Guys/girls/etc,
I do suggest that someone actually spends some time coming up with a
table of what the current state is, what we could do, what would
happen if we did that.
Right now there's a lot of possibilities (new drive, drive with
windows, drive
Am Fri, 19 Oct 2012 11:32:49 -0700
schrieb Adrian Chadd adr...@freebsd.org:
Guys/girls/etc,
I do suggest that someone actually spends some time coming up with a
table of what the current state is, what we could do, what would
happen if we did that.
Right now there's a lot of
On Fri, Oct 19, 2012 at 10:38:41PM +0200, Rainer Duffner wrote:
Am Fri, 19 Oct 2012 11:32:49 -0700
schrieb Adrian Chadd adr...@freebsd.org:
Guys/girls/etc,
I do suggest that someone actually spends some time coming up with a
table of what the current state is, what we could do, what
On Friday, October 19, 2012 2:26:45 pm Alex de Joode wrote:
https://sabotage.org/FBSD/FBSD-9.1RC2.jpg
Screen shot. Basicly the only diff between the two r210 are the disks,
one has 2x2TB (works) and the one that has 2x1Tb fails with the above error.
Both are sw/ mirrored. No hw/ raid and
On Fri, Oct 19, 2012 at 10:38:41PM +0200, Rainer Duffner wrote:
Am Fri, 19 Oct 2012 11:32:49 -0700
schrieb Adrian Chadd adr...@freebsd.org:
Guys/girls/etc,
I do suggest that someone actually spends some time coming up with a
table of what the current state is, what we could do, what
Am Fri, 19 Oct 2012 17:11:30 -0400
schrieb Glen Barber g...@freebsd.org:
On Fri, Oct 19, 2012 at 10:38:41PM +0200, Rainer Duffner wrote:
If I select the entire disk for FreeBSD, I think it's a reasonable
assumption that the MBR should replaced, too.
Please don't make people install FreeBSD
On Sat, Oct 20, 2012 at 02:06:03AM +0200, Rainer Duffner wrote:
Am Fri, 19 Oct 2012 17:11:30 -0400
schrieb Glen Barber g...@freebsd.org:
On Fri, Oct 19, 2012 at 10:38:41PM +0200, Rainer Duffner wrote:
If I select the entire disk for FreeBSD, I think it's a reasonable
assumption that
On recent -stable I got a lots of (see subj) now due to CTF changes in
*.mk files.
I have
WITHOUT_CDDL=yes
in my /etc/src.conf and WITHOUT_CDDL have wider scope than WITHOUT_CTF
suggested, but WITHOUT_CDDL is not checked in recent CTF changes.
Please fix this thing.
On 20.10.2012 5:06, Andrey Chernov wrote:
On recent -stable I got a lots of (see subj) now due to CTF changes in
*.mk files.
I have
WITHOUT_CDDL=yes
in my /etc/src.conf and WITHOUT_CDDL have wider scope than WITHOUT_CTF
suggested, but WITHOUT_CDDL is not checked in recent CTF changes.
Hello Andriy,
Friday, October 19, 2012, 6:27:11 AM, you wrote:
Here is a (quite large) patch:
http://people.freebsd.org/~avg/sensors.diff
Please note that if affects both kernel and userland code.
Read it(4) manual page after upgrading. Note that you will need to add some
entries to
Yesterday I have gotten lenovo e320 laptop, with core i3 2350
and HD3000 integrated. Gonna wait few days till 9.1 release.
I never used anything aside intel on my old laptop. Kostik
Belousov made a port of kms and I found patches from june and
jule on the net. What should I do after 9.1 install in
On Sat, 20 Oct 2012, Rainer Duffner wrote:
Am Fri, 19 Oct 2012 17:11:30 -0400
schrieb Glen Barber g...@freebsd.org:
On Fri, Oct 19, 2012 at 10:38:41PM +0200, Rainer Duffner wrote:
If I select the entire disk for FreeBSD, I think it's a reasonable
assumption that the MBR should replaced, too.
On Sat, Oct 20, 2012 at 06:14:08AM +0200, Zoran Kolic wrote:
Yesterday I have gotten lenovo e320 laptop, with core i3 2350
and HD3000 integrated. Gonna wait few days till 9.1 release.
I never used anything aside intel on my old laptop. Kostik
Belousov made a port of kms and I found patches
19 matches
Mail list logo
