Am Montag, 26. Dezember 2005 14:15 CEST schrieb Harald Schmalzbauer:
Hello, merry christmas to veryone, especially Pawel, since I hope he can
fix my problem ;)
When I create /dev/ggate2 I can successfully dd to it (the raw device),
but as soon as I newfs ggate2 and mount it I cannot write a
14:29 CEST schrieb Emanuel Strobl:
Am Montag, 26. Dezember 2005 14:15 CEST schrieb Harald Schmalzbauer:
Hello, merry christmas to veryone, especially Pawel, since I hope he
can fix my problem ;)
When I create /dev/ggate2 I can successfully dd to it (the raw
device), but as soon as I newfs
Hello,
the following error occured on my new RELENG_6 server from yesterday:
gune:/#34: cpdup -X .cvsjail -X INTERN -X PUBLIC /server/ /mnt/
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=75285888
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=75290368
ad4: detached
unknown: TIMEOUT
Am Dienstag, 20. Dezember 2005 17:50 CEST schrieb Harald Schmalzbauer:
Hello,
I have one box where PRNG kickstart doesn't work.
Whne I set 'sysctl kern.random.sys.seeded=0' and
'cat /boot/kernel/kernel.gz /dev/random' .random.sys.seeded is still
0. On any other box it's enough to send one
Hello,
1.8.2.1 of src/lib/libnetgraph/ broke buildworld 3 hours ago on RELENG_6
-Harry
pgpNmHpG3OyhC.pgp
Description: PGP signature
Am Samstag, 8. Oktober 2005 03:29 CEST schrieb Brandon Fosdick:
I have a Soekris crypto card (hifn driver) in a box that I don't have
immediate access to. Is there some way to disable the card w/o rebooting
the machine? I know I could take the driver out of the kernel or force
it not to load,
Hello,
tonight I wanted to consolidate (for an upcoming trekstor i.beat organix)
my oggs and therefore eval the difference between reencoded
[EMAIL PROTECTED][EMAIL PROTECTED] and the original reread
wavs(tracks)-[EMAIL PROTECTED]
Unfortunately I couldn't grab my CDs anymore. I can remember I
Am Montag, 19. September 2005 03:21 CEST schrieb Ben Kaduk:
Interesting -- I only have one other suggession; I was recently
rereading the handbook section on burning cd's, and it said that it was
better to have .pcm files which don't have the header that .wav files do
-- apparently the header
Am Dienstag, 13. September 2005 22:51 CEST schrieb Sandro Noel:
Greetings.
i dont know if this is the right group, so please correct me .
I'm using 5.4 RELEASE
i need to know how to uninstall a networking device from the system
completely
it was configured with sysinstall.
when the
Hello,
I just installed BETA4 on my notebook and was curious about the acpi_sony
driver, but all I can see is that powerd soesn't work anymoder (if I call
powerd -a min dev.cpu.0.freq is still 800 wher it was 62 without acpi_sony
compiled in) and that I can set LCD brightness :) *bright_smile*
Am Freitag, 26. August 2005 08:15 CEST schrieb Emanuel Strobl:
Hello,
fortunately I had my laptop logging on the serial console when my box
suddenly panicked.
I just removed a directory, no usual panic message. System is late
BETA2, please find attached the trace and panick message
Am Sonntag, 4. September 2005 03:15 CEST schrieb L.Edgeworth:
[*snip*]
Sorry, can't help, i can't see any reason for this in your config file...
options SMP
deviceapic
options DEVICE_POLLING
options HZ=1000
AFAIK setting HZ to 1000 isn't
Am Donnerstag, 25. August 2005 20:06 CEST schrieb John Baldwin:
[...]
I have no ideay why, but over night I recompiled my PXEROOT system
(BETA3 now) and the problem vanished. I can't see any changes in the
cvsweb, so I have absolutely no idea what the problem was. Hardware is
exactly the
Hello,
fortunately I had my laptop logging on the serial console when my box
suddenly panicked.
I just removed a directory, no usual panic message. System is late BETA2,
please find attached the trace and panick message
Thanks,
-Harry
panic: handle_workitem_remove: bad file delta
KDB: enter:
Am Mittwoch, 17. August 2005 21:29 CEST schrieb John Baldwin:
On Wednesday 17 August 2005 10:43 am, Emanuel Strobl wrote:
Am Dienstag, 16. August 2005 19:52 CEST schrieb Brooks Davis:
On Tue, Aug 16, 2005 at 02:05:08PM +0200, Emanuel Strobl wrote:
Hello,
I just wanted to ask
Am Dienstag, 16. August 2005 19:52 CEST schrieb Brooks Davis:
On Tue, Aug 16, 2005 at 02:05:08PM +0200, Emanuel Strobl wrote:
Hello,
I just wanted to ask if somebody had success with providing pxe boot
service under 6-BETA2.
I have two clients, one NET4501 wich just reboots after
Am Mittwoch, 17. August 2005 21:29 CEST schrieb John Baldwin:
On Wednesday 17 August 2005 10:43 am, Emanuel Strobl wrote:
[*schnip*]
Relocating the loader and the BTX
Starting the BTX loader
int=0006 err= efl=00010202 eip=00023c21
eax= ebx=000384e0 ecx=000384e0
Hello,
I just wanted to ask if somebody had success with providing pxe boot
service under 6-BETA2.
I have two clients, one NET4501 wich just reboots after fetching pxeldr via
TFTP and a Laptop which just hangs when NFS-loading kernel.
I'm about to investigate further, but maybe someone can
Am Dienstag, 16. August 2005 19:52 CEST schrieb Brooks Davis:
On Tue, Aug 16, 2005 at 02:05:08PM +0200, Emanuel Strobl wrote:
Hello,
I just wanted to ask if somebody had success with providing pxe boot
service under 6-BETA2.
I have two clients, one NET4501 wich just reboots after
Am Mittwoch, 10. August 2005 19:48 CEST schrieb Unix:
O. Hartmann wrote:
Mike Jakubik wrote:
On Wed, August 10, 2005 6:37 am, Dmitry Mityugov said:
There are Maxtor MaXLine II and III, and perhaps several other
models, that are supposed to work 24/7.
Right, i have a dead 250GB Maxline
Am Donnerstag, 21. Juli 2005 22:06 CEST schrieb Matthias Buelow:
[EMAIL PROTECTED] writes:
My main problem, and to others after seeing the question from times to
times, is to know which is a good (not necessarly the best) hardware to
run FreeBSD on?
When I buy a new motherboard, which chipset
Am Sonntag, 17. Juli 2005 21:12 CEST schrieb Robert Watson:
(2) /dev/cuaa* has been renamed to /dev/cuad*
I saw that cuaa got cuad and ucom0 got cuaU0. Now what is the meaning of
cua? tty AFAIK is TeleTYpe...
Thanks,
-Harry
pgp8dSThJXdRN.pgp
Description: PGP signature
Am Freitag, 15. Juli 2005 16:58 CEST schrieb Marc G. Fournier:
And, for the stupid question of the day ... how long before 5.x is no
longer supported? I'm just about to deploy a new server, and was
*going* to go with 5.x, but would I be better just skipping 5.x
altogether? Or are there such
Am Freitag, 15. Juli 2005 22:12 CEST schrieb Eirik Øverby:
On Jul 15, 2005, at 5:10 PM, Emanuel Strobl wrote:
Am Freitag, 15. Juli 2005 16:58 CEST schrieb Marc G. Fournier:
And, for the stupid question of the day ... how long before 5.x
is no
longer supported? I'm just about to deploy
Am Montag, 11. Juli 2005 15:49 CEST schrieb Chris Hodgins:
On 7/10/05, Johannes Verwijnen [EMAIL PROTECTED] wrote:
On Jul 9, 2005, at 19:36, Chris Hodgins wrote:
It seems that gmirror does not give us any partitions. A listing of
the mirror directory shows only the gm0 node even though
Am Montag, 20. Juni 2005 19:36 schrieb Benjamin Sher:
Dear friends:
I just installed FreeBSD 5.4. I have two primary HD: the first disk
holds WinXP, the second disk now has FreeBSD.
Well, the good news is that my first install of FreeBSD went perfectly.
I selected ALL for installation of
Am Samstag, 11. Juni 2005 10:00 schrieb Robert Watson:
On Fri, 10 Jun 2005, Steve Roome wrote:
[...]
- Thread package. In 5.x, you get process scope threads by default, but
it turns out MySQL is tuned for system scope threads, and this is
particularly visible in the supersmack
Am Montag, 9. Mai 2005 23:04 schrieb Ken Smith:
The Release Engineering Team is happy to announce the availability
of FreeBSD 5.4-RELEASE, the latest release of the FreeBSD Stable
development branch. Since FreeBSD 5.3-RELEASE in November 2004 we have
made many improvements in functionality,
Am Donnerstag, 5. Mai 2005 14:06 schrieb Eirik Øverby:
Hi all,
I'm struggling with some hosting environments where I am managing a
large number of jails (100) spread over about a dozen servers. I am
starting to see disk space as a real problem, especially given that each
physical box needs
Hello, from the Mk/bsd.port.mk I read:
# CONFIGURE_ARGS
# - Pass these args to configure if ${HAS_CONFIGURE} is set.
# Default: --prefix=${PREFIX} ${CONFIGURE_TARGET} if
# GNU_CONFIGURE is set, CC=${CC} CCFLAGS=${CFLAGS}
#
Am Dienstag, 26. April 2005 19:31 schrieb Emanuel Strobl:
Hello, from the Mk/bsd.port.mk I read:
# CONFIGURE_ARGS
# - Pass these args to configure if ${HAS_CONFIGURE} is set.
# Default: --prefix=${PREFIX} ${CONFIGURE_TARGET} if
# GNU_CONFIGURE
Dear all,
today I had problems with cut (tset -I -S -Q \?$term | cut -d ' ' -f1) on
5.4-RC3 and after googling for the error cut: stdin: Illegal byte sequence
I found that someone already reported [1] that cut kind of misbehaves from
5.3-RC on.
Is this still a problem?
Thanks,
-Harry
[1]
Am Sonntag, 3. April 2005 18:07 schrieb Pierre-Luc Drouin:
Christian Brueffer wrote:
On Sat, Apr 02, 2005 at 09:16:48PM -0500, Pierre-Luc Drouin wrote:
Since I upgraded from 5.3-stable to 5.4-prerelease, I've noticed that my
computer is hanging badly under load. I've a P4 2.53 GHz without
Am Mittwoch, 23. März 2005 23:37 schrieb Danny Howard:
Christian Brueffer wrote:
[...]
When I try to transfer a file from outside the LAN to box C, which
resides inside the LAN, the movie on box B starts to stagger.
[...]
Can anyone confirm this?
Anecdotally . . . I upgraded my
Am Freitag, 18. März 2005 02:13 schrieb Mikhail Teterin:
Hello!
Is there a place, from where I can download a reasonably fresh
5.4-PRERELEASE install (or mini-install) .iso image for amd64?
Thanks!
Unfortunately I can't offer you a special one (usually I have several arch
optimized -STABLE
Am Freitag, 18. März 2005 04:18 schrieb Emanuel Strobl:
Am Freitag, 18. März 2005 02:13 schrieb Mikhail Teterin:
Hello!
Is there a place, from where I can download a reasonably fresh
5.4-PRERELEASE install (or mini-install) .iso image for amd64?
Thanks!
Unfortunately I can't offer
Am Montag, 21. Februar 2005 19:24 schrieb Max Laier:
On Monday 21 February 2005 15:57, Harald Schmalzbauer wrote:
Am Sonntag, 20. Februar 2005 19:10 schrieb Max Laier:
/me slaps self ...
[...]
I tested your patch against RELENG_5 and the panic with pfctl -Fall
seems to be solved.
But I
Am Freitag, 11. März 2005 13:10 schrieb Emanuel Strobl:
I'm on the firewall again and verified that block return works for tcp-rst,
but not for return-icmp (with or without code), it seems packets just get
droped, regardless for which protocol (tested UDP, ICMP, TCP).
Sorry for the noise, it's
Am Freitag, 11. März 2005 14:52 schrieb Daniel Hartmeier:
On Fri, Mar 11, 2005 at 01:50:47PM +0100, Emanuel Strobl wrote:
Then I have another problem which may be a design problem.
I am multihomed and have several pass reply-to rules. So far things are
working fine but block return
Am Freitag, 11. März 2005 16:19 schrieb Emanuel Strobl:
Am Freitag, 11. März 2005 14:52 schrieb Daniel Hartmeier:
block return-rst in on wi0 reply-to (wi0 10.1.1.1) inet proto tcp all
This is valid syntax and pfctl loads the rule, but the functionality is
not implemented in kernel yet
Hello,
I have one box with several gmirror filesystems. When the box panics I always
have to reconnect lost inodes and also inconsistent filesystems.
I never had this problem with non gmirrored mountpoints.
Also, the mirrored mountpoints are almost completely idel regarding writes.
Here's an
Am Mittwoch, 9. März 2005 03:04 schrieb Pierre-Luc Drouin:
I have updated a system from FreeBSD 4.10 to 5.3 (I did a fresh new
installation from scatch). At the same time we put a new CPUs in there.
[...]
What could be the cause?
The non-technical answer: FreeBSD 5.4 is in the release cycle
Am Samstag, 5. März 2005 02:06 schrieb David Magda:
On Mar 3, 2005, at 19:20, Emanuel Strobl wrote:
If you consider upgrading to 5.4 you can use any onboard chipset or
cheap
controller card with some geomclasses, namely g_mirror. It's fantastic
and
the only stateful mirror solution I
Am Donnerstag, 3. März 2005 10:23 schrieb Artem Kuchin:
Gerald de la Pascua [EMAIL PROTECTED] wrote:
we have had very good experiences with the basic 3ware cards,
I would recommend them, easy to install, reliable, and good
perfomance, in the uk they cost just over 100 pounds, so a
Dear Hackers,
on one remote machine I see the following error (RELENG_5 from this night):
pcib0: no PRT entry for 0.1.INTA
I have only ssh access and putting -v in /boot.config didn't help me getting
a verbose dmesg.
Anyway, I think it's caused by a bogus BIOS but I wanted to make sure having
Am Sonntag, 27. Februar 2005 03:51 schrieb Jeff Roberson:
Fixed the build and merged this. Any stable users who can should test
this. I'm very confident in it, but more eyes and users are better.
I haven't really understood what filedesc code is and does, but accidentaly I
have several boxes
Am Mittwoch, 23. Februar 2005 11:24 schrieb Poul-Henning Kamp:
+ The c partition is a problem you have to address anyway (and it is
+ best addressed by removing the magicness of the c partition
+ altogether). [...]
It is not going to be removed. We're going to wait for MBR to die.
Dear all,
I read this commit message to RELENG_5:
http://www.freebsd.org/cgi/getmsg.cgi?fetch=436074+438355+/usr/local/www/db/text/2005/cvs-all/20050206.cvs-all
and commented out the HZ=1000 line in my kernel config so I use the default.
But I see only 100 interrupts/sec on clk (with systat) so
Hello,
I'm running RELENG_5 with ATAmkIII and have the following panic:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xdeadc116
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc058b0a7
stack pointer =
Am Donnerstag, 10. Februar 2005 11:00 schrieb Martin Minkus:
I seem to have been having a rather strange networking issue in FreeBSD
5.3-Stable (it started happening immediately after 5.2.1 and has persisted
since.. I keep ³hoping² that next time I cvsup it will be fixed, but no).
I
Am Mittwoch, 9. Februar 2005 15:00 schrieb Søren Schmidt:
[...]
As always, enjoy and let me know how it goes...
It's running here on several RELENG_5 machines. Like with j I also can't find
any problems with k :)
But the strange 16MB/s limit on my ICH2 (i815 B-step (tualatin)) machine still
Am Dienstag, 8. Februar 2005 14:18 schrieb Max Laier:
On Monday 07 February 2005 16:52, Emanuel Strobl wrote:
[...]
Do you have pfsync compiled in? Is it up? If that's the case, can you try
No, I don't have pfsync in the kernel, also I don't have modules on that box.
to reproduce
Am Samstag, 8. Januar 2005 18:24 schrieb Max Laier:
On Saturday 08 January 2005 17:52, Robert Watson wrote:
On Sat, 8 Jan 2005, Harald Schmalzbauer wrote:
my machine hard locks with the attached ruleset. If I set
debug.mpsafenet to 0 everything is fine. This was a wild guess from me,
Am Montag, 7. Februar 2005 16:52 schrieb Emanuel Strobl:
Am Samstag, 8. Januar 2005 18:24 schrieb Max Laier:
On Saturday 08 January 2005 17:52, Robert Watson wrote:
On Sat, 8 Jan 2005, Harald Schmalzbauer wrote:
my machine hard locks with the attached ruleset. If I set
Am Montag, 7. Februar 2005 17:32 schrieb Emanuel Strobl:
Am Montag, 7. Februar 2005 16:52 schrieb Emanuel Strobl:
Am Samstag, 8. Januar 2005 18:24 schrieb Max Laier:
On Saturday 08 January 2005 17:52, Robert Watson wrote:
On Sat, 8 Jan 2005, Harald Schmalzbauer wrote:
my machine
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc056cc3c
stack pointer = 0x10:0xcc706918
frame pointer = 0x10:0xcc70693c
code segment= base 0x0,
Hello,
again I got a panic with PF when debug.mpsafenet is enabled, when set to 0 the
machine runs almost fine, except that 'pfctl -F all -f /etc/pf.conf' panics
and block return and block return-icmp(3,13) doesn't work.
Here's the trace:
Fatal trap 12: page fault while in kernel mode
fault
Hello,
I have a kernel with SW_WATCHDOG and simply enabled watchdog in rc.conf.
I haven't found much info on that topic but I guess when the machine hangs
(watchdogd doesn't get a result from the trivial fsck (what's that btw?)) the
kernel will reset the machine. Best would be if I never see
Am Samstag, 22. Januar 2005 15:52 schrieb Shunsuke Akiyama:
[...]
Good work!
I've updated your patch. If attached patch works correctly with new
revision chip, I'll commit this. Please test attached patch, and tell
me the result.
I tested it (after removing the DOS ^M characters) against
Am Montag, 24. Januar 2005 19:29 schrieb Vivek Khera:
On Jan 24, 2005, at 3:11 AM, Emanuel Strobl wrote:
kernel will reset the machine. Best would be if I never see watchdog in
action but I'm seeing a panic message after some interrupt statistics
(see
below) and the machine doesn't power
Am Donnerstag, 20. Januar 2005 14:18 schrieb Michal Mertl:
I tested my patch for binary safety on CURRENT yesterday (dialed with
ppp) and didn't notice any problem.
I'm attaching my patch again because some recipients didn't probably
receive it yesterday.
This didn't apply cleanly against
Am Donnerstag, 20. Januar 2005 14:18 schrieb Michal Mertl:
works for both chips on CURRENT for serial console. It detects if the
chip is rev 3.00 and aplies the patch only for it.
The author of the patch mentions it isn't binary safe - sometimes the
chip stops working. I planned to test
Dear all,
I'm sorry but I have to report something's going wrong with simple ftp file
transfers. I have two Fujitsu Siemens Primergy B125 servers ([EMAIL PROTECTED],
512MB) with both 'em' cards in it which are connected directly together, so
no switch can drop packets. When I transfer a large
Dear ata interested guys,
I observed a strange behaviour which seems to explain my often noticed 16MB/s
hard-limit
I have a UDMA133 drive (MAXTOR 6L060J3) which saturates at 16MB/s when I dump
anything to it, regardless of the block size. This transfer rate is reached
with bs=4k and doesn't
Am Donnerstag, 20. Januar 2005 19:48 schrieb Emanuel Strobl:
Dear ata interested guys,
I observed a strange behaviour which seems to explain my often noticed
16MB/s hard-limit
I have a UDMA133 drive (MAXTOR 6L060J3) which saturates at 16MB/s when I
dump anything to it, regardless
Am Donnerstag, 20. Januar 2005 20:00 schrieb Emanuel Strobl:
Am Donnerstag, 20. Januar 2005 19:48 schrieb Emanuel Strobl:
Dear ata interested guys,
I observed a strange behaviour which seems to explain my often noticed
16MB/s hard-limit
I have a UDMA133 drive (MAXTOR 6L060J3) which
Dear experts,
I have two USB-RS232 Adaptors, both with PL2303 chipset. One is working the
other one not (I hate to say it but both are working under win).
The not working (more expensive) one gets recognized as ucom0 and I have
ucom0, also I can receive signal but not transmit.
When I connect
Am Dienstag, 18. Januar 2005 16:17 schrieb Andrew L. Neporada:
On Tue, Jan 18, 2005 at 01:06:43PM +0100, Emanuel Strobl wrote:
Dear experts,
I have two USB-RS232 Adaptors, both with PL2303 chipset. One is working
the other one not (I hate to say it but both are working under win
Dear list, dear Pawel,
I think it's a big error that ordinary users can issue a 'gmirror
stop /dev/mirrir/sample' with success!
Thanks,
-Harry
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To
Am Samstag, 8. Januar 2005 15:41 schrieb Simon L. Nielsen:
I think it's a big error that ordinary users can issue a 'gmirror
stop /dev/mirrir/sample' with success!
Are you sure about that? I can't do it on my test system:
[EMAIL PROTECTED]:~] gmirror stop /dev/mirror/sys0
Permission
The topic says all. I'd like to increase the size of the last GPT id (and
there's space after the last sector of the last ID).
Is it safe to delete it and create a new one with a bigger size?
Thanks,
-Harry
pgphD0rfLb0i0.pgp
Description: PGP signature
Am Donnerstag, 18. November 2004 13:27 schrieb Robert Watson:
On Wed, 17 Nov 2004, Emanuel Strobl wrote:
I really love 5.3 in many ways but here're some unbelievable transfer
First, thanks a lot to all of you paying attention to my problem again.
I'll use this as a cumulative answer
Dear lists,
since I couldn't get the speed I need with GbE em cards I bought a pair of
firewire 1394a cards and a 6-to-6-Cable.
I tried fwe, could ping the other host and also transfer very little files via
ftp, but as soon as I try to shovel a view hundred kByte files the connection
stalles.
Am Freitag, 19. November 2004 13:56 schrieb Robert Watson:
On Fri, 19 Nov 2004, Emanuel Strobl wrote:
Am Donnerstag, 18. November 2004 13:27 schrieb Robert Watson:
On Wed, 17 Nov 2004, Emanuel Strobl wrote:
I really love 5.3 in many ways but here're some unbelievable transfer
[...]
Well
Dear best guys,
I really love 5.3 in many ways but here're some unbelievable transfer rates,
after I went out and bought a pair of Intel GigaBit Ethernet Cards to solve
my performance problem (*laugh*):
(In short, see *** below)
Tests were done with two Intel GigaBit Ethernet cards (82547EI,
Am Donnerstag, 18. November 2004 00:17 schrieb Sean McNeil:
On Wed, 2004-11-17 at 23:57 +0100, Emanuel Strobl wrote:
Dear best guys,
I really love 5.3 in many ways but here're some unbelievable transfer
rates, after I went out and bought a pair of Intel GigaBit Ethernet Cards
to solve
Am Donnerstag, 18. November 2004 00:33 schrieb Scott Long:
Emanuel Strobl wrote:
Dear best guys,
I really love 5.3 in many ways but here're some unbelievable transfer
rates, after I went out and bought a pair of Intel GigaBit Ethernet Cards
to solve my performance problem (*laugh
Am Donnerstag, 18. November 2004 01:01 schrieb Chuck Swiger:
Emanuel Strobl wrote:
[ ... ]
Tests were done with two Intel GigaBit Ethernet cards (82547EI, 32bit PCI
Desktop adapter MT) connected directly without a switch/hub
If filesharing via NFS is your primary goal, it's reasonable
Am Montag, 8. November 2004 11:56 schrieb Mipam:
Hi,
Is the preemption stable under 5.3 release?
Can i savely enable it under 5.3? Latest i heard that in combination
with the ule scheduler it didnt work well and wasnt stable.
ULE was disabled and can't be compiled with 5.3, PREEMPTION and
79 matches
Mail list logo
