On 10/22/10 15:03, Giulio Ferro wrote:
I've seen people discuss about this and it happened to me as well.
Freebsd 8.1 stable 25th september amd64
This server has one single boot disk with ufs + 1 array (hardware, 3ware)
which hold 2,7TB data. I've formatted the latter with ZFS.
Things
I use a server (FreeBSD 8.1R amd64) with two dozens of jails configured.
I've found out that only a few of them are terminated normally (via
/etc/rc.shutdown) during the system shutdown. FreeBSD reports that
20sec interval has elapsed and simply kills all the jails that are not yet
Morgan Wesström wrote:
Garrett Moore wrote:
The drives being discussed in my related thread (regarding poor performance)
are all WD Green drives. I have used wdidle3 to set all of my drive timeouts
to 5 minutes. I'll see what sort of difference this makes for performance.
Even if it makes no
Jordi Espasa Clofent wrote:
I need to upgrade the OpenSSH from the shiped 4.5p1 versions in 6.x and
7.x branches to 4.5p2 or higher(1).
[...]
¿How can I upgrade the OpenSSH in the _same_ RELENG? ¿Maybe using the
ports?
portsnap fetch update
cd /usr/ports/security/openssh-portable/
make
Doug Hardie wrote:
I recently upgraded 3 of my 5 servers to 7.0. Two of them are on new
hardware and one is on hardware that used to run 6.2. Since then, 2
of my thousands of users are unable to access the servers running
7.0. They can access the server running 6.2 just fine. What happens
alan bryan wrote:
I've got a new server with a 3ware 9550SXU with the
Battery. I am using FreeBSD 7.0-Release (tried both
4BSD and ULE) using AMD64 and the 3ware performance
for writes is just plain horrible. Something is
obviously wrong but I'm not sure what.
Any ideas? Anybody have one
Ivan Voras wrote:
Erik Stian Tefre wrote:
Results from bonnie++ with default settings on my box (7.0-RELEASE,
amd64, 480 MB system memory, BBU, write cache enabled, 7 drive raid-5,
storsave = balance, NCQ on):
Version 1.93d --Sequential Output-- --Sequential Input-
--Random
Steven Hartland wrote:
When booting a default kernel e.g. standard install cd the KVM over LAN
keyboard on Supermicro's IPMI modules refuse to function. Once installed
if we build a kernel without USB all is good.
So two questions:-
1. Can usb support be disabled from the loader?
2. Anyone got
card through two different USB card readers and
somehow I ended up with two identical /dev/daXs1 devices (X was 4 IIRC)
which I could not mount. A reboot fixed the problem and I could mount
the card.
A copy of the kernel log:
http://spider.netlife.no/~erik2/kernellog.txt
--
Erik Stian Tefre
(cvsuped today)
seems to make no difference. Compiling the kernel with or without SMP
also makes no difference.
Anyone have any ideas or workarounds other than limiting the memory to
2GB?
--
Erik Stian Tefre
___
freebsd-stable@freebsd.org mailing list
http
The filesystem is forcibly unmounted. Active special devices
continue to work, but all other files return errors if further
accesses are attempted. The root filesystem cannot be forcibly
unmounted.
--
Erik Stian Tefre
Quoting Brandon Fosdick [EMAIL PROTECTED]:
Now that my shiny new 9500S is installed and not fighting for IRQs,
I've created and initialized a ~2.5TB array using the bios utility.
So the next step is mounting the new array. I naively tried following
the regular handbook instructions for adding
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED]
--
Erik Stian Tefre [EMAIL PROTECTED]
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org
13 matches
Mail list logo