Re: ZFS zpool replace problems

2010-01-26 Thread Jeremy Chadwick
I'm removing the In-Reply-To mail headers for this thread, as you've now hijacked it for a different purpose. Please don't do this; start a new thread altogether. :-) On Tue, Jan 26, 2010 at 02:57:20PM +0100, Gerrit Kühn wrote: I am still busy replacing RE2-disks with updated drives. I came

Re: ZFS zpool replace problems

2010-01-26 Thread Gerrit Kühn
On Tue, 26 Jan 2010 06:30:21 -0800 Jeremy Chadwick free...@jdc.parodius.com wrote about Re: ZFS zpool replace problems: JC I'm removing the In-Reply-To mail headers for this thread, as you've JC now hijacked it for a different purpose. Please don't do this; start JC a new thread altogether

Re: ZFS zpool replace problems

2010-01-26 Thread Chuck Swiger
Hi-- On Jan 26, 2010, at 7:03 AM, Gerrit Kühn wrote: [ ... ] atap...@pci0:3:6:0: class=0x010401 card=0x02409005 chip=0x02401095 rev=0x02 hdr=0x00 vendor = 'Silicon Image Inc (Was: CMD Technology Inc)' device = 'SATA/Raid controller(2XSATA150) (SIL3112)' class = mass

Re: ZFS zpool replace problems

2010-01-26 Thread Gerrit Kühn
On Tue, 26 Jan 2010 08:15:27 -0800 Chuck Swiger cswi...@mac.com wrote about Re: ZFS zpool replace problems: CS Meanwhile I took out the ad18 drive again and tried to use a CS different drive. But that was listed as UNAVAIL with corrupted CS data by zfs. CS There's your problem-- the Silicon

Re: ZFS zpool replace problems

2010-01-26 Thread Jeremy Chadwick
On Tue, Jan 26, 2010 at 08:15:27AM -0800, Chuck Swiger wrote: Hi-- On Jan 26, 2010, at 7:03 AM, Gerrit Kühn wrote: [ ... ] atap...@pci0:3:6:0: class=0x010401 card=0x02409005 chip=0x02401095 rev=0x02 hdr=0x00 vendor = 'Silicon Image Inc (Was: CMD Technology Inc)' device =

Re: ZFS zpool replace problems

2010-01-26 Thread Gerrit Kühn
On Tue, 26 Jan 2010 08:27:37 -0800 Jeremy Chadwick free...@jdc.parodius.com wrote about Re: ZFS zpool replace problems: JC Well, to be fair, we can't be 100% certain he got bit by that bug. JC It's possible/likely, but we don't know for certain at this point. We JC also don't know what brand

Re: ZFS zpool replace problems

2010-01-26 Thread Jeremy Chadwick
On Tue, Jan 26, 2010 at 04:03:20PM +0100, Gerrit Kühn wrote: On Tue, 26 Jan 2010 06:30:21 -0800 Jeremy Chadwick free...@jdc.parodius.com wrote about Re: ZFS zpool replace problems: JC 2) How did you attach ad18? Did you tell the system about it using JCatacontrol? If so, what commands

Re: ZFS zpool replace problems

2010-01-26 Thread Gerrit Kühn
On Tue, 26 Jan 2010 08:46:19 -0800 Jeremy Chadwick free...@jdc.parodius.com wrote about Re: ZFS zpool replace problems: JC - zpool offline pool disk JC - atacontrol detach ataX (where X = channel associated with disk) JC - Physically remove bad disk JC - Physically insert new disk JC - Wait 15

Re: ZFS zpool replace problems

2010-01-26 Thread Gerrit Kühn
On Tue, 26 Jan 2010 08:59:27 -0800 Chuck Swiger cswi...@mac.com wrote about Re: ZFS zpool replace problems: CS As a general matter of maintaining RAID systems, however, the approach CS to upgrading drive firmware on members of a RAID array should be to CS take down the entire container

Re: ZFS zpool replace problems

2010-01-26 Thread Chuck Swiger
Hi-- On Jan 26, 2010, at 8:25 AM, Gerrit Kühn wrote: CS There's your problem-- the Silicon Image 3112/4 chips are remarkably CS buggy and exhibit data corruption: Hm, sure? I'm sure that the SII 3112 is buggy. I am not sure that it is the primary or only cause of the problems you describe.