On Sat, 14 Apr 2007, Marc G. Fournier wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
- --On Sunday, April 08, 2007 23:04:42 -0400 Dave [EMAIL PROTECTED] wrote:
Hello,
This is what i get for catching this late. Can you describe your
situation? I've got a server, router actually
On Friday 13 April 2007 16:17, patrick wrote:
Unfortunately that makes it impossible to interrupt the loader to go into
single user mode (or whatever).
that is depending on the situation you are in. there are more ways to get
in 'other boot modes' then using the bootloader on the disk.
I just updated my Thinkpad R40 to Releng_6. The psm0 device is discovered no
longer (hence no touchpad or joystick). Dmesg shows no trace of it.
Also
# sysctl dev.acpi_ibm.0.events=1
outputs:
dev.acpi_ibm.0.events: 0
sysctl: dev.acpi_ibm.0.events: Input/output error
I'd be glad about any
Dear all,
Shouldn't there be a tiny little note in /usr/src/UPDATING just to
mention that sendmail was updated to 8.14.1 in RELENG_6 and that
consequently anyone running any milters out of ports[1] should
recompile all of them?
Cheers,
Matthew
[1] assuming
On Saturday 14 April 2007 10:36, Daniel O'Connor wrote:
On Friday 13 April 2007 16:17, patrick wrote:
Unfortunately that makes it impossible to interrupt the loader to go
into single user mode (or whatever).
that is depending on the situation you are in. there are more ways to get
in
On Saturday 14 April 2007 18:55, Andrei Kolu wrote:
Press any key to gain boot prompt while system is loading- look at loader
messages.
From appeared boot prompt type: boot -s
I was under the impression that if you set the autoboot delay to 0 (or -1)
then you won't be able to get to the
Hi,
Does FreeBSD support an IT8212F based PCI Raid card?
I've added one to a freeBSD 6.2-stable install and the
card shows in dmesg as
pci2: ACPI PCI bus on pcib2
atapci0: ITE IT8212F UDMA133 controller port
0xbc00-0xbc07,0xb800-0xb803,0xb400- 0xb407,0xb000- 0xb003,0xbe00-0xbe0f
irq
Gary wrote:
Does FreeBSD support an IT8212F based PCI Raid card?
Yes, it does. Typing man 4 ata reveals:
ITE:IT8211F, IT8212F.
As for the part of seeing the disks on this controller, it depends on
how the controller is able to present them to the system.
Martin
Martin Hudec wrote:
Yes, it does. Typing man 4 ata reveals:
ITE:IT8211F, IT8212F.
As for the part of seeing the disks on this controller, it depends on
how the controller is able to present them to the system.
I forgot to mention also man 8 atacontrol saying:
Shouldn't there be a tiny little note in /usr/src/UPDATING just to
mention that sendmail was updated to 8.14.1 in RELENG_6 and that
consequently anyone running any milters out of ports[1] should
recompile all of them?
[1] assuming SENDMAIL_MILTER_IN_BASE
Yes, thanks for bringing it up.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Is anyone looking into merging in the patch available at:
http://www.ualberta.ca/~cdjones/cdjones_jail_soc2006.patch
That provides both memory and cpu limits on a jail? It appears to be against
REL_6 from last years SOC ...
Is anyone
Hi,
On 14 Apr 2007, at 14:52, Gary wrote:
Hi,
Does FreeBSD support an IT8212F based PCI Raid card?
Yes:
atapci1: ITE IT8212F UDMA133 controller port
0xac00-0xac07,0xb000-0xb003,0xb400-0xb407,0xb800-
0xb803,0xbc00-0xbc0f irq 11 at device 10.0 on pci0
ata2: ATA channel 0 on atapci1
ata3:
The Handbook contains descriptions of GELI and GBDE for encrypting
disk partitions; will both of these techniques remain available into
the future? The fact that there are two implies (to me) that one may
be on the way out, in preference of the other.
In src/sys/geom/eli (RELENG_6) the oldest
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hey guys, having a problem getting the sound driver to load
properly, any suggestions/solutions?
[EMAIL PROTECTED]:27:0:class=0x040300 card=0x103e147b
chip=0x26688086 rev=0x03 hdr=0x00
Not sure which sound drivers to load.. since there
On Sat, Apr 14, 2007 at 07:34:56PM -0400, [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hey guys, having a problem getting the sound driver to load
properly, any suggestions/solutions?
[EMAIL PROTECTED]:27:0:class=0x040300 card=0x103e147b
See attached URL. This is a Screenshot of GNOME 2.18 on my Dell 5100
Laptop.
http://www.borgsdemons.com/images/Screenshot.png
jmc
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail
16 matches
Mail list logo