On 21 February 2011 09:40, al...@ulgsm.ru wrote:
Hi all.
if in rc.conf
cloned_interfaces=vlan66
ifconfig_vlan66=inet 192.168.66.1 netmask 255.255.255.0 vlan 66 vlandev em0
When statun em0 is active, status vlan66 is active,
but packets are silently drop.
it is need to add in rc.conf
As the subject suggests, my laptop crashed during make installworld. The new
kernel boots, but the ELF interpreter is not found and I cannot get to a single
user prompt. What is the least painful way to proceed?
___
freebsd-stable@freebsd.org mailing
* Sergey Kandaurov pluk...@gmail.com [2011-02-21 11:16:47 +0300]:
On 21 February 2011 09:40, al...@ulgsm.ru wrote:
Hi all.
if in rc.conf
cloned_interfaces=vlan66
ifconfig_vlan66=inet 192.168.66.1 netmask 255.255.255.0 vlan 66 vlandev
em0
When statun em0 is active, status
--- On Sun, 2/20/11, Rick Macklem rmack...@uoguelph.ca wrote:
From: Rick Macklem rmack...@uoguelph.ca
Subject: Re: NFS client over udp
To: Kirill Yelizarov ykir...@yahoo.com
Cc: freebsd-stable@freebsd.org
Date: Sunday, February 20, 2011, 9:02 PM
--- On Fri, 2/18/11, Kirill
Yelizarov
On Sat, 19 Feb 2011 08:56:45 -0800 (PST) Kirill Yelizarov
ykir...@yahoo.com wrote about Re: NFS client over udp:
KY Is ZFS in use on the system which sees rising wired
KY memory?
KY No, ufs only.
KY I found an old post stating there is a leak with nfs udp client over
KY zfs:
KY
On Thu, Feb 17, 2011 at 07:38:19PM +0700, Edho P Arief wrote:
UFS:
create GPT
# gpart create -s gpt da0
create partition, with start position 4k-aligned
# gpart add -t freebsd-ufs -b 1024 -l mydata da0
default newfs is good enough
# newfs -U /dev/gpt/mydata
corrections welcome.
Hi!
Hmm, wasn't the issues with 3T drives, that they internally use
4K blocks and emulate 512 and that therefore 8 block alignments
are an performance issue ?
The reason I'm asking: I encounter the problem of the lost
secondary GPT table:
Feb 17 22:15:44 vserv1 kernel: GEOM: ad7:
on 19/02/2011 14:36 Steven Hartland said the following:
I'm trying to debug a possibly failing CPU, so I thought it would
be easy just disable the cores using machdep.hlt_cpus and see if
we see the panic's we've been seeing.
The problem is it seems ULE doesnt properly support
On Thu, 17 Feb 2011 21:46:43 +0100 Kurt Jaeger wrote:
Hmm, wasn't the issues with 3T drives, that they internally use
4K blocks and emulate 512 and that therefore 8 block alignments
are an performance issue ?
The reason I'm asking: I encounter the problem of the lost
secondary GPT table:
Hi!
On Mon, 21 Feb 2011 17:16:37 +0100 Kurt Jaeger wrote:
Hmm, wasn't the issues with 3T drives, that they internally use
4K blocks and emulate 512 and that therefore 8 block alignments
are an performance issue ?
The reason I'm asking: I encounter the problem of the lost
Hi!
Feb 17 22:15:44 vserv1 kernel: GEOM: ufsid/4d5d8faa10b63ac1: using the
primary only -- recovery suggested.
Boris Samorodov wrote:
It may be the case here if you to used glabel(8) to create a label
for the whole disk.
I did not use glabel on that disk.
Hm, I may be
on 21/02/2011 10:04 David J Brooks said the following:
As the subject suggests, my laptop crashed during make installworld. The new
kernel boots, but the ELF interpreter is not found and I cannot get to a
single
user prompt. What is the least painful way to proceed?
My take would be an
On 2/18/11 5:42 PM, Kenneth D. Merry wrote:
Let me know if you run into any issues.
Ken
Rebuilt this afternoon, rebooted, still works fine.
I'll post if I run into any problem.
Thanks for your work, this driver was clearly needed on 8.x seeing the
cards are becoming more and more
I'm sending this to both stable and emulation lists, but I'm not
subscribed to the emulation list so please cc: me there.
Hi guys,
I'm told this is known but I can't find any information. I'm running the
checkout for RELENG_8_2 from Thursday and the issue I'm having on my amd64
Desktop is
On Mon, 21 Feb 2011 18:56:36 +0200
Andriy Gapon a...@freebsd.org wrote:
on 21/02/2011 10:04 David J Brooks said the following:
As the subject suggests, my laptop crashed during make installworld. The new
kernel boots, but the ELF interpreter is not found and I cannot get to a
single
On Sun, Feb 20, 2011 at 00:20:57 +0100, Ollivier Robert wrote:
According to Kenneth D. Merry:
I just merged the mps(4) driver to stable/8, for those of you with LSI 6Gb
SAS hardware.
Thanks a lot Ken! You'll make people very happy (incl. me!) in France :)
You're welcome!
There are
In article op.vq9kcoyl34t2sn@tech304 you write:
I'm sending this to both stable and emulation lists, but I'm not
subscribed to the emulation list so please cc: me there.
Hi guys,
I'm told this is known but I can't find any information. I'm running the
checkout for RELENG_8_2 from Thursday
On Mon, Feb 21, 2011 at 8:29 AM, Andriy Gapon a...@freebsd.org wrote:
on 19/02/2011 14:36 Steven Hartland said the following:
I'm trying to debug a possibly failing CPU, so I thought it would
be easy just disable the cores using machdep.hlt_cpus and see if
we see the panic's we've been seeing.
- Original Message -
From: Garrett Cooper gcoo...@freebsd.org
As a followup to this and based on discussions with other folks,
the fact that it's using hlt to halt CPUs without rescheduling tasks /
masking interrupts, etc is not good. So none of the *hlt* sysctls are
really doing the
On Mon, Feb 21, 2011 at 12:30 PM, Steven Hartland
kill...@multiplay.co.uk wrote:
- Original Message - From: Garrett Cooper gcoo...@freebsd.org
As a followup to this and based on discussions with other folks,
the fact that it's using hlt to halt CPUs without rescheduling tasks /
On Mon, 21 Feb 2011 13:24:25 -0600, Juergen Lock n...@jelal.kn-bremen.de
wrote:
I see you use the nvidia blob (I use radeon with xorg drivers), did
you rebuild the nvidia driver port after upgrading to 8.2? Or maybe
this has something to do with the vdpau support that was added to
flash
On Sun, Feb 20, 2011 at 10:30:52AM -0500, Mike Tancsa wrote:
On 2/20/2011 9:33 AM, Andrey Smagin wrote:
On week -current I have same problem, my box paniced every 2-15 min. I
resolve problem by next steps - unplug network connectors from 2 intel em
(82574L) cards. I think last time that
On 2/21/2011 4:10 PM, Kostik Belousov wrote:
Is this reproducable ?
The box seems to have a number of bugs it has been triggering.
g...@freebsd.org's netgraph patch, seems to have fixed one of them. Max seems
to have fixed two others. This one, I am not sure. I can re-enable memguard to
On 2011-Feb-21 08:04:00 +, David J Brooks freys...@comcast.net wrote:
As the subject suggests, my laptop crashed during make installworld.
The new kernel boots, but the ELF interpreter is not found and I
cannot get to a single user prompt. What is the least painful way to
proceed?
My first
On Mon, Feb 21, 2011 at 02:48:19PM -0600, Mark Felder wrote:
On Mon, 21 Feb 2011 13:24:25 -0600, Juergen Lock n...@jelal.kn-bremen.de
wrote:
I see you use the nvidia blob (I use radeon with xorg drivers), did
you rebuild the nvidia driver port after upgrading to 8.2? Or maybe
this
--- On Sun, 2/20/11, Rick Macklem rmack...@uoguelph.ca wrote:
From: Rick Macklem rmack...@uoguelph.ca
Subject: Re: NFS client over udp
To: Kirill Yelizarov ykir...@yahoo.com
Cc: freebsd-stable@freebsd.org
Date: Sunday, February 20, 2011, 9:02 PM
--- On Fri, 2/18/11, Kirill
On Mon, 21 Feb 2011 16:42:59 -0600, Mark Felder f...@feld.me wrote:
I was talking about the maintainer of the flashplugin in ports. That
would be Nox. I have sent him an email.
Oh dear I take that back. He was the last person to submit an update, not
the maintainer. Whoops!
Mark
On Mon, 21 Feb 2011 16:39:49 -0600, Juergen Lock n...@jelal.kn-bremen.de
wrote:
So on the box that got the panic the nvidia driver port was rebuilt
after the src/kernel upgrade?
Correct.
The maintainer is emulation@... But yes if its confirmed and
can't be fixed we should probably
Hi,
I'm unable to load the ipfw module in 8.2-PRELEASE. i think
this may be due to ABI changes at the kernel level. ,
$ sudo kldload /boot/kernel/ipfw.ko
$ dmesg
...
KLD ipfw.ko: depends on libalias - not available or version mismatch
linker_load_file: Unsupported file type
$ uname -a
FreeBSD
On 2011-Feb-21 08:04:00 +, David J Brooks freys...@comcast.net wrote:
As the subject suggests, my laptop crashed during make installworld.
The new kernel boots, but the ELF interpreter is not found and I
cannot get to a single user prompt. What is the least painful way to
proceed?
My
On Mon, Feb 21, 2011 at 9:16 PM, David J Brooks freys...@comcast.net wrote:
Next I made a copy of the 8.2-RC# install disk and tried to do an upgrade in
place. It was unable to backup /etc to /var/tmp/etc due to:
ELF interpreter /libexec/ld-elf.so.1 not found
Abort trap
.. again. This
31 matches
Mail list logo