1 54M -91:-96 100 EPS
SSID RATES DSPARMS<1> ERP<0x0> RSN HTCAP HTINFO
???<7f0804000840> WME
Has someone an idea how to make a wpa_supplicant.conf entry for this
SSID?
Thanks
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public
El día jueves, julio 18, 2019 a las 12:41:42p. m. +0200, Matthias Apitz
escribió:
> I compiled net/tcpdump to look into that and it supports:
>
> # /usr/local/sbin/tcpdump -ni wlan0 -y IEEE802_11_RADIO
>
> and the OpenBSD man page explains what IEEE802_11_RADIO is. I think,
>
El día jueves, julio 18, 2019 a las 12:04:27p. m. +0200, Matthias Apitz
escribió:
> El día miércoles, julio 17, 2019 a las 11:45:49p. m. -0700, Adrian Chadd
> escribió:
>
> > Hi!
> >
> > So, you don't set the monitor flag like you do on linux. you create a
> >
evice = 'AR9462 Wireless Network Adapter'
class = network
Any ideas?
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
___
freebsd-wir
t with wireshark. The captured data might grow
> fast.
Thanks
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
___
freebsd-wireless@freebsd.org mail
El día miércoles, julio 17, 2019 a las 09:05:43a. m. +0200, Vladimir Botka
escribió:
> Hello,
>
> On Wed, 17 Jul 2019 07:38:26 +0200
> Matthias Apitz wrote:
>
> > ... The association requests are always rejected with a package
> > CTRL-EVENT-ASSOC-REJECT with 'statu
ification - EAP success=0
1548368341.548586: dbus: flush_object_timeout_handler: Timeout - sending
changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http:
es not apply.
When I change 'attach 200' to 'notify 100', /usr/sbin/ath3kfw gets
called and the firmware gets loaded into the chip. But nothing of BT does work.
I think some of the nd_*.ko modules do not attach and due to this the
device is not created.
matthias
--
Matthias Apitz, ✉ g...@unixarea
El día Thursday, April 18, 2019 a las 07:02:38PM +0200, Matthias Apitz escribió:
> El día Thursday, April 18, 2019 a las 08:05:53AM -0700, Adrian Chadd escribió:
>
> > that means it SHOULD be ready for normal HCI operation. bcdDevice=1 is what
> > the driver uses to dete
0x3. Timeout
/etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for device ubt0
anything else to test?
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.
AR3012; bcdDevice=2, exiting
attached is the full output of 'dmesg'
And now?
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
70 years of NATO - 70 years of wars (Jugoslavia, Afghanistan, Syria, ...) a
Am Mittwoch, 17. April 2019 19:59:17 CEST schrieb Adrian Chadd
:
no flashing occurs. it's running out of ram on the chip.
-a
So, what do you want me to test exactly?
ma
--
Sent from my Ubuntu phone
http://www.unixarea.de/
___
Am Mittwoch, 17. April 2019 18:59:08 CEST schrieb Adrian Chadd
:
Did you copy it into /usr/share/ or did you pass the command line arg in to
set the base directory? :)
I was aware of the flag -f to specify the dir or file of the
firmware to use. I did not set this by intention to *not* flash
El día Wednesday, April 17, 2019 a las 02:35:51PM +, Alexey Dokuchaev
escribió:
> On Tue, Apr 16, 2019 at 12:34:12PM +0200, Matthias Apitz wrote:
> > # ./ath3kfw -D -d ugen0.3 -I
> > ath3kfw: opening dev 0.3
> > ath3k_is_3012: found AR3012
> > main: state=0x0e
any mail in this thread of 24++ mails. But as
Adrian
said "Does ath3k load OK?" I was confused and thinking in a loadable
kernel module. Sorry.
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
70
firmware path) (-I)
-D: enable debugging
-d: device to operate upon
-f: firmware path, if not default
-I: enable informational output
What next? Will it brick my Wifi chip? I need this C720 for work. :-)
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-3890204
t@c720-r342378:/home/guru # find /boot/ | grep -i ath3
root@c720-r342378:/home/guru #
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
70 years of NATO - 70 years of wars (Jugoslavia, Afghanistan,
STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] LDPC transmit/receive enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9460 mac 640.2 RF5110 phy 2456.12
ath0: 2GHz radio: 0x; 5GHz radio: 0x
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://
daemon[1340]: [session uid=1000 pid=1340]
Successfully activated service 'org.bluez.obex'
Apr 13 19:24:02 aurora systemd[1306]: Started Bluetooth OBEX service.
Apr 13 19:24:17 aurora kernel: [ 116.965447] Bluetooth: hci0: last event is
not cmd complete (0x0f)
--
Matthias Apitz, ✉ g...@unixa
On Thu, 11 Apr 2019 14:23:50 +, Alexey Dokuchaev wrote:
> On Thu, Apr 11, 2019 at 06:36:26AM -0700, Adrian Chadd wrote:
>> I have a tool to upload firmware -- github.com/erikarn/ath3k.
>> See if that helps!
>
> Something's wrong:
>
> $ git clone https://github.com/erikarn/ath3k.git
> $ cd
t;), product: e03d
vendor: 0489 ("Foxconn / Hon Hai"), product: e04d ("Atheros AR3012
Bluetooth")
vendor: 0489 ("Foxconn / Hon Hai"), product: e04e
vendor: 0489 ("Foxconn / Hon Hai"), product: e056
vendor: 0489
type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: Enabling WB222 BTCOEX
...
But I don't know how to further enable any BT device. The above
hcccontrol just says:
# hccontrol inquiry
hccontrol: Could not create socket: Address family no
Why the BOOTP/DHCP are not logged by the ipfilter?
This could smell as a problem caused by the AP, but any other device
(for example an iPhone) connects fine and gets an IP addr.
Thanks
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http
17 17:24:18 e6330-r314251 kernel: wlan0: [00:1c:4a:06:17:f5] AMRR
decreasing rate 2 (txcnt=29 retrycnt=11)
--
Matthias Apitz, ✉ g...@unixarea.de, ⌂ http://www.unixarea.de/ ☎
+49-176-38902045
___
freebsd-wireless@freebsd.org mailing list
El día lunes, abril 17, 2017 a las 08:20:01a. m. -0700, Adrian Chadd escribió:
> Sorry I meant wlandebug +rate and check dmesg
>
Hi,
tail of /var/log/messages attached;
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, ⌂ http://www.unixarea.de/ ☎
+49-176-38902045
Apr 17 17
0 0 25.0 -952.0M
0 100 0 0 0 0 24.0 -952.0M
Anything else?
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, ⌂ http://www.unixarea.de/ ☎
+49-176-38902045
___
freebsd-wireless@freebs
RTL8188CUS, RF 6052 1T1R
Dell r210: LAN bce0: C7201.7MB/s
e6330 --> r2101.8MB/s
but:
e6330 --> C720120KB/s, ... 30KB/s
What can I check to resolve the poor rate from the e6330 to the C720?
The other direction i.e. from C720 to e6330 is fine.
Thanks
matthias
--
Matthias
Hello,
The old chip now works fine after compiling the bcm.ko with special options
and installing a port for the firmware blob. A big thanks to Adrian for
this work.
What I'm still struggling with, is put a static IP addr, and not DHCP in
the interface
like
ifconfig_wlan0="WPA inet
"wlan0"
ifconfig_wlan0="WPA DHCP"
Do I miss anything? Thanks
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, ⌂ http://www.unixarea.de/ ☎
+49-176-38902045
"Die Verkaufsschlager des Buchmarkts geben Auskunft über den Zustand einer
Gesellschaft bzw.
sind, was d
your air radio APs?
Btw: Please, do not top post and trim your replies.
matthias
--
Matthias Apitz, g...@unixarea.de, http://www.unixarea.de/ +49-170-4527211
+49-176-38902045
Wenn der Mensch von den Umständen gebildet wird, so muß man die Umstände
menschlich bilden.
Si el hombre es
wpa_supplicant[2787]: wlan0: CTRL-EVENT-CONNECTED -
Connection to 00:26:0b:4b:b8:44 completed [id=2 id_str=]
Dec 22 11:40:01 unixarea kernel: wlan0: link state changed to DOWN
Dec 22 11:40:00 unixarea wpa_supplicant[2787]: wlan0: CTRL-EVENT-DISCONNECTED
bssid=00:26:0b:4b:b8:44 reason=0
--
Matthias
and finish
the scan (which would reset the vap powersave state.)
I've added another cancel check in scan_task(). Please update this and
see what happens!
Hi Adrian,
It works fine now, see the attached log.
Thanks and ¡Feliz Navidad!
matthias
--
Matthias Apitz, g...@unixarea.de, http
work at all with the latest snapshots. Here are the details:
https://forum.pfsense.org/index.php?topic=84481.0
There are no details in this thread. Enable debugging with 'wlandebug +...'
and check /var/log/messages for the results.
HIH
matthias
--
Matthias Apitz, g...@unixarea.de, http
boot.
If not, you could compile a kernel enabling debugging and could boot
with verbose messages
matthias
On Dec 21, 2014 2:43 AM, Matthias Apitz g...@unixarea.de wrote:
El día Saturday, December 20, 2014 a las 02:42:18PM -0800, solarflow99
escribió:
Since this seems
Is there any diff between 'RTL8191S' and 'RTL8191SU'?
Why the rsu(4) says: rsu0: MAC/BB RTL8712 cut 3?
Thanks
matthias
--
Matthias Apitz, g...@unixarea.de, http://www.unixarea.de/ +49-170-4527211
1989-2014: The Wall was torn down so that we go to war together again.
El Muro ha sido
) has an issue in the every 5 minute bgscan and I
wanted to make sure that this is also (or not) with rsu(4). All this is
in 11-CURRENT. See also:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=195348
Thanks
matthias
--
Matthias Apitz, g...@unixarea.de, http://www.unixarea.de/ +49
(running r255948 from
October 2013) with the same physical WLAN card; there is no problem with
the bg scans every 5 minutes, it just goes ahead after any scan; this is
an issue in head.
matthias
--
Matthias Apitz, g...@unixarea.de, http://www.unixarea.de/ +49-170-4527211
1989-2014: The Wall
:5306: undefined reference to
`ieee80211_chan2mode'
if_ath.o: In function `ath_init':
/usr/src/sys/dev/ath/if_ath.c:2455: undefined reference to
`ieee80211_start_all'
if_ath.o: In function `ath_vap_create':
(many)
Thx
matthias
--
Matthias Apitz | /\ ASCII Ribbon
El día Monday, November 03, 2014 a las 06:46:33AM +0100, Matthias Apitz
escribió:
El día Sunday, November 02, 2014 a las 10:46:13AM -0800, Adrian Chadd
escribió:
It's not forcing the adapter itself into ps mode - it's just net80211
doing an off-channel scan thing.
Someone has
?
matthias
--
Matthias Apitz | /\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de | \ / - No HTML/RTF in E-mail
WWW: http://www.unixarea.de/ | X- No proprietary attachments
phone: +49-170-4527211 | / \ - Respect for open standards
network with ifconfig ...
wlan0 has an IP addr (via DHCP from the AP) and I can connect. What do
you mean with to a plain network with ifconfig ...?
Thx
matthias
--
Matthias Apitz | /\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de | \ / - No HTML/RTF in E-mail
IEEE80211_NODE_PWR_MGT) == 0) {
/* Enable station power save mode */
vap-iv_sta_ps(vap, 1);
Or any other idea? Can you guide me through this?
Thx
matthias
--
Matthias Apitz | /\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de
El día Sunday, October 26, 2014 a las 08:36:05AM +0100, Matthias Apitz escribió:
# ifconfig wlan0 list sta
ADDR AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS FLAG
00:13:f7:0d:08:4827 54M 35.50 1219 64016 EPS AE RSN
the kernel is 11-CURRENT (r269739) and I have
:f7:0d:08:48] sta power save mode
off
every 5 minutes...
Who is switching this on/off?
thx
matthias
--
Matthias Apitz | /\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de | \ / - No HTML/RTF in E-mail
WWW: http://www.unixarea.de/ | X- No proprietary
matthias
PD: To Adrian, I'm willing to file a PR, but the problem is, I will not
return to this hotel and can not provide more information or tests.
--
Matthias Apitz | /\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de | \ / - No HTML/RTF in E-mail
WWW: http
El día Saturday, August 16, 2014 a las 05:25:09PM +0200, Matthias Apitz
escribió:
Hello,
I have a 11-CURRENT from August 8, and ports from the day after:
FreeBSD tiny-r269739 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r269739M: Fri Aug
15 18:07:41 CEST 2014 guru@vm-tiny-r269739:/usr/obj
vendor = 'Broadcom Corporation'
device = 'BCM4312 802.11b/g LP-PHY'
class = network
I'm using NDIS as well in r250588. Is bwi/bwn the point to start to look
into for this chip? Thanks
matthias
--
Matthias Apitz | /\ ASCII Ribbon Campaign: www.asciiribbon.org
El día Thursday, May 16, 2013 a las 11:28:07PM -0700, Adrian Chadd escribió:
There's unfortunately no active bwn driver maintainer.
What is/was the state of this? Has it worked once and only needs now
debugging and/or updating?
Thx
matthias
--
Sent from my FreeBSD netbook
Matthias
48 matches
Mail list logo
