Hi,
I have openssl 0.9.7 installed in /usr/local/ssl, and am trying to
configure my freeradius installation at my wireless access point with :
./configure --prefix=/usr/local/freeradius --with-ssl=/usr/local/ssl
--with-mcrypt=/usr/local/lib/libmcrypt/
--with-mhash=/usr/local/lib/libmhash/
On Wed, 20 Aug 2003, Ulrich Walcher wrote:
http://www.bcore.de/data/dialup_admin.help.tar.gz
Added, thanks
Am Mit, 2003-08-20 um 16.17 schrieb Alan DeKok:
Ulrich Walcher [EMAIL PROTECTED] wrote:
I just wrote some new help pages for dialup-admin and altered
user_edit.attrs.
Where
I just wrote some new help pages for dialup-admin and altered
user_edit.attrs.
Where to should I mail the diff and the pages?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Ulrich Walcher [EMAIL PROTECTED] wrote:
I just wrote some new help pages for dialup-admin and altered
user_edit.attrs.
Where to should I mail the diff and the pages?
Put them in a 'tar' file on a web page, and mail the URL to the
list.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.bcore.de/data/dialup_admin.help.tar.gz
Am Mit, 2003-08-20 um 16.17 schrieb Alan DeKok:
Ulrich Walcher [EMAIL PROTECTED] wrote:
I just wrote some new help pages for dialup-admin and altered
user_edit.attrs.
Where to should I mail the diff and the pages?
Put them in a 'tar
hello,freeradius-users
I installed the freeradius0.9.0 and configed with cisco2950,the database is
mysql,now the authentication is correct,
but the accounting is not .
what should I do?
my radiusd.conf :
#
# Accounting. Log the accounting data.
#
accounting {
#
Hmmmall ???
Maybe from OS
Continue with switch device
May i
I just a new fresh user :)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Rich
Sent: Wednesday, August 06, 2003 11:00 AM
To: '[EMAIL PROTECTED]'
Subject: RE: help,help again
Sorry to bother you.
I learn from freeradius mailing list that you have encountered a problem what is
puzzling me:
I am now trying to connect my freeradius to mssql2000 on freeBSD4.8
I am doing as below:
setup unixODBC at /usr/apps/unixODBC
compile and install freeTDS0.61 with --with-unixODBC
:00 AM
To: [EMAIL PROTECTED]
Subject: help,help
hello,freeradius-users
I installed the freeradius0.9.0 and configed with cisco2950,the database is
mysql,now the authentication is correct,
but the accounting is not .
what should I do?
my radiusd.conf :
#
# Accounting. Log
I have problem with installing a Wireless network. I
don' t know how to set up a radius server 9.0.9 with
LEAP. I use Cisco' s device.
Please help me soon! And please mail me:
mailto: [EMAIL PROTECTED]
Best Regard.
__
Do you Yahoo!?
Yahoo! SiteBuilder - Free
Lee Puay Yong [EMAIL PROTECTED] wrote:
1.Does freeradius support LEAP authentication against ldap
database.
No.
I tried to set authorize to LDAP and authentication to EAP but no
progress so far (maybe I missed somthing). It will be nice if
someone can send me a wokring copy of the
Hi,
I am trying to set up a radius server using EAP type = leap. I
have a cisco airnet 1100 A.P and it is successfully so far. However, I have
problem trying to authenticate it through the ldap database.
I do a web search and the most recent one I found in somewhere
in april this
To christian :
Sorry to bother you.
I learn from freeradius mailing list that you have encountered a problem what is
puzzling me:
I am now trying to connect my freeradius to mssql2000 on freeBSD4.8
I am doing as below:
setup unixODBC at /usr/apps/unixODBC
compile and install freeTDS0.61 with
Hi, ALL!
I'm novice in installation, configuration and using of FreeRadius.
Can anybody help me in accounting configuring for NAS.
I mean, should I use acct_users file? Or should I use another config
params and files?
I'm not planning to use DB right now.
Best regards,
Serg Shipaev
-
List info
On Thursday, July 31, 2003, at 04:25 PM, Alan DeKok wrote:
Harrie Hazewinkel [EMAIL PROTECTED] wrote:
While looking at it to upgrade to net-snmp, I was wondering why
you do a compile test for some include files and not just a
check??
It's part of autoconf. Ask them.
Maybe I should ask, but you
Harrie Hazewinkel [EMAIL PROTECTED] wrote:
It's part of autoconf. Ask them.
Maybe I should ask, but you use it from them.
So why are you using it??
Because it's the best solution for a horrible problem.
The whole point of using a tool is to see that it works. Knowing
HOW it works
On Tuesday, July 29, 2003, at 08:01 PM, Alan DeKok wrote:
Atanu Das [EMAIL PROTECTED] wrote:
net-snmp-5.0.6-17
FreeRADIUS can't use net-snmp.
While looking at it to upgrade to net-snmp, I was wondering why
you do a compile test for some include files and not just a
check?? Do you want to make
place simultaneously.
Well Just like that, is the message natural???
Ats
- Original Message -
From: Harrie Hazewinkel [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Harrie Hazewinkel [EMAIL PROTECTED]
Sent: Thursday, July 31, 2003 6:10 PM
Subject: Re: Need Help with SNMP
On Tuesday
Harrie Hazewinkel [EMAIL PROTECTED] wrote:
While looking at it to upgrade to net-snmp, I was wondering why
you do a compile test for some include files and not just a
check??
It's part of autoconf. Ask them.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
What Mr. DeKok means is...
He's a giant jerk and thinks he's too important to answer your questions, so he has to
make snide remarks questioning your intelligence to make himself feel all nerdy and
stuff.
Best advice, keep playing till you get something.
You wrote:
Atanu Das [EMAIL
***Wonders who p**sed in Steven's cheerios this morning
At 07:02 AM 7/31/03, you wrote:
What Mr. DeKok means is...
He's a giant jerk and thinks he's too important to answer your questions,
so he has to make snide remarks questioning your intelligence to make
himself feel all nerdy
Subject: Re: Need Help with SNMP
Steven Fries [EMAIL PROTECTED] wrote:
What Mr. DeKok means is...
He's a giant jerk and thinks he's too important to answer your
questions, so
he has to make snide remarks questioning your intelligence to make
himself
feel all nerdy and stuff
Hi there, I'm new to this group and would like to contribute by helping out
with creating the man pages from the rlm* files. I'm gonna start with the
following two if no one else has.
1. rlm_digest
2. rlm_krb5
tia
mike
-
List info/subscribe/unsubscribe? See
On Fri August 1 2003 01:18, [EMAIL PROTECTED] wrote:
Hi there, I'm new to this group and would like to contribute by helping out
with creating the man pages from the rlm* files. I'm gonna start with the
following two if no one else has.
1. rlm_digest
2. rlm_krb5
Cool. Post them to the list
: Thursday, July 31, 2003 6:19 PM
To: [EMAIL PROTECTED]
Subject: RADIUS Help
Hi there, I'm new to this group and would like to contribute by helping out
with creating the man pages from the rlm* files. I'm gonna start with the
following two if no one else has.
1. rlm_digest
2. rlm_krb5
tia
[EMAIL PROTECTED] wrote:
Hi there, I'm new to this group and would like to contribute by helping out
with creating the man pages from the rlm* files. I'm gonna start with the
following two if no one else has.
...
Much thanks...
Please see: http://www.freeradius.org/award.html
for
On Wed, Jul 30, 2003 at 04:15:22PM +0530, Pradeep Rai wrote:
I do not know how to configure accounting information for new users. Does
Tell your NAS to send accounting information.
this require MySQL for it. Is this possible w/o using MySQL. What all files
you can log into detail files.
do
Atanu Das [EMAIL PROTECTED] wrote:
net-snmp-5.0.6-17
FreeRADIUS can't use net-snmp.
This is just a wild guess. But I have the ucd-snmp as well net-snmp
headers in /usr/include/ucd-snmp and /usr/include/net-snmp.
Then get the server to look at *only* ucd-snmp, and ignore net-snmp.
Alan
of net-snmp. This has left me with
no choice :)
Thanks anyway
Regards,
Ats
- Original Message -
From: Alan DeKok [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, July 29, 2003 11:31 PM
Subject: Re: Need Help with SNMP
Atanu Das [EMAIL PROTECTED] wrote:
net-snmp-5.0.6-17
-Original Message-
From: Atanu Das [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 30 July 2003 4:46 AM
To: [EMAIL PROTECTED]
Subject: Re: Need Help with SNMP
Hi Alan,
Thanks for such a prompt reply. I got your point.
I think I will have to install the **OLD** version of ucd-snmp
(ucd-snmp
Hi,
I working under linux mandrake 9.0
I installed RADIUS and OpenLDAP.
I was modified the file radiusd.conf like this:
ldap {
server = localhost
identity = cn=Manager,o=prism,c=fr
password = secret
basedn =
Make sure 'rlm_ldap.so' is in the path specified as your library directory in your
radius.conf file. If it is, you should probably try the newest release of FreeRadius.
Had this problem with rlm_sql but was resolved when I used CVS snapshot version.
Steven
You wrote:
Hi,
I working under
that realm. Below is what I have configured. Any help as to what I am
doing wrong would be greatly appreciated as this is the lastissue I need
to get working before testing in a production environment.
From the proxy.conf file: (typically this is the only file we need to
use)
realm someisp.com
Scotty B. Lowe [EMAIL PROTECTED] wrote:
DEFAULT Hint = ISP, Auth-Type = Accept
^^^^^^
== :=
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Alan DeKok wrote:
Scotty B. Lowe [EMAIL PROTECTED] wrote:
DEFAULT Hint = ISP, Auth-Type = Accept
^^^^^^
== :=
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Scotty B. Lowe [EMAIL PROTECTED] wrote:
I tried switching the sytax as you suggested but it still does not
accept it. Any other ideas?
The FAQ?
It does not work is directly addressed.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
}')
Maybe something is wrong.
Please help!!!
It is really URGENT!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi there,
I've this problem solved,
but still follow problem:
When I account only stop packets, I have succesful call records in the
MySQL, where is unsuccessful?
What I need change?
Oleg
Please help urgent!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf
Kent Holloway [EMAIL PROTECTED] wrote:
I thought thats what the preproxy thing was all about??
How, exactly do you plan on doing something in the 'pre-proxy'
stage, if you don't configure a module to do that work?
Am I missing something obvious here?
Yes. The pre-proxy section is a
Message -
From: Kent Holloway [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, July 11, 2003 4:54 PM
Subject: RE: Preproxy help?
Ok I am trying to re-write any username that does not have an @ symbol to be
something new.
Here is my radiusd.conf file and my preproxy_users file.
So in my
.
Thanks in advance for you help
Mohsen
---
Ce mail ne contient pas de virus. This mail is virus free
Scanné par Escan Checked by Escan
-
List info
From: ARC Informatique
Sent: Sunday, 13 July 2003 2:10 AM
I just installed freeradius 0.9 pre1 with postgresql and rlm_ippool.
I have to migrate tonight so this is an urgent request
I have a Cisco AS5300 and here is what I would like to do:
1. Assign public dynamic ip pool say from
10.1.100.1 10.1.101.254
- Original Message -
From: ARC Informatique [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, July 12, 2003 11:09 AM
Subject: URGENT HELP rlm_ippool
Hi,
I just installed freeradius 0.9 pre1 with postgresql and rlm_ippool.
I have to migrate tonight so
Thanks,
you are right. It works by itself. I did a test with radpingtest.
Now I am going to test it on my cisco.
- Original Message -
From: Paul Hampson [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, July 12, 2003 4:27 PM
Subject: RE: URGENT HELP rlm_ippool
From: ARC
]
To: [EMAIL PROTECTED]
Sent: Saturday, July 12, 2003 4:27 PM
Subject: RE: URGENT HELP rlm_ippool
From: ARC Informatique
Sent: Sunday, 13 July 2003 2:10 AM
I just installed freeradius 0.9 pre1 with postgresql and rlm_ippool.
I have to migrate tonight so this is an urgent request
I have a Cisco
Subject: RE: Preproxy help?
Ok I am trying to re-write any username that does not have an @ symbol to
be something new.
Here is my radiusd.conf file and my preproxy_users file.
So in my test case username 'blah' would be re-written to be
'[EMAIL PROTECTED]'
There is very little for examples
/Linux (RedHat 8.0)
Dual Pentium 2 (2 x 233MHz cpu) w/ 512Mb Ram etc etc
-Rob
- Original Message -
From: Peter Nixon [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, July 12, 2003 8:41 PM
Subject: Re: Preproxy help?
Did you let anyone know about this bug? Sounds like it needs
From: ARC Informatique
Sent: Sunday, 13 July 2003 4:22 AM
To: [EMAIL PROTECTED]
Subject: Re: URGENT HELP rlm_ippool
Now after testing on the cisco, do I have to remove the pools defined
in it because ip addresses are still beeing assigned by cisco instead
of freeradius although I have
Kent Holloway [EMAIL PROTECTED] wrote:
I have searched the archives and there is very little info on the
preproxy stuff in Radius.
It was new in 0.8.1.
Does anyone have some working example configs or maybe a little more in
depth info about it?
There's 'raddb/preproxy_users', which is
: Thursday, July 10, 2003 7:25 PM
To: [EMAIL PROTECTED]
Subject: RE: Preproxy help?
Can you tell us exactly what it is you are looking to do? It would help
us in pointing you in the right direction.
Gene
-Original Message-
From: Kent Holloway [mailto:[EMAIL PROTECTED]
Sent: Thursday, July
: Friday, July 11, 2003 10:55 AM
To: [EMAIL PROTECTED]
Subject: RE: Preproxy help?
Ok I am trying to re-write any username that does not have an @ symbol
to be something new. Here is my radiusd.conf file and my preproxy_users
file. So in my test case username 'blah' would be re-written to be
'[EMAIL
]
Sent: Friday, July 11, 2003 3:40 PM
To: [EMAIL PROTECTED]
Subject: RE: Preproxy help?
Just curious, I noticed that you are trying to add a realm to the
username and then stripping it back off to do the search. Can you tell
me the point? Are you proxying to different servers based on realm?
Gene
Kent Holloway [EMAIL PROTECTED] wrote:
I want to re-write particular users to a certain realm even though they
don't login with that realm in their username. Basically a way to force
a particular realm by user without having to have the user even use a
realm.
attr_rewrite?
If it doesn't
I thought thats what the preproxy thing was all about??
Am I missing something obvious here?
-Original Message-
From: Alan DeKok
Sent: Friday, July 11, 2003 4:02 PM
Subject: Re: Preproxy help?
Kent Holloway [EMAIL PROTECTED] wrote:
I want to re-write particular users to a certain
Name =
"qwerty123\000isdn.xxx.com"
Acct-Multi-Session-Id = "00BA"
Acct-Link-Count = 2
Framed-IP-Address = 203.x.x.x
NAS-Port = 2 NAS-Port-Type =
Virtual Service-Type =
Framed-User NAS-IP-Address =
203.x.x.x Acct-Delay-Time =
30
From above. Username field is en
-User
NAS-IP-Address = 203.x.x.x
Acct-Delay-Time = 30
From above. Username field is encrypted from @ into \000 then
Authentication fail!.
What should I do? Please help me.
Best regards,
Thassanai Mhuansean
System Engineer Wireless
GMM
part de Robert
Canary
Envoye : jeudi 10 juillet 2003 16:47
A : [EMAIL PROTECTED]
Objet : Re: Please Help me about Freeradius!
If I'm not mistaken...I believe freeradius has some rewrite
capablilities that can be used on the User-Name. I remember someone
posting before with issues of trying
I have searched the archives and there is very little info on the preproxy stuff in
Radius.
Does anyone have some working example configs or maybe a little more in depth info
about it?
Thanks in advance.
P.S. We are using freeradius 0.8.1
-Kent
-
List info/subscribe/unsubscribe? See
Can you tell us exactly what it is you are looking to do? It would help
us in pointing you in the right direction.
Gene
-Original Message-
From: Kent Holloway [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 10, 2003 6:02 PM
To: [EMAIL PROTECTED]
Subject: Preproxy help?
I have searched
the version is less recent than the
freeradius-snapshot-20030708.tar.gz file ...
Could you help me, please ? Maybe i forgot to do something... I need help because I am
a new user of FreeRADIUS and even Linux...
Thank you very much, Greetings.
P.S.: I use the Linux Mandrake 9.1. distribution
]
[mailto:[EMAIL PROTECTED] la part de Idriss
MAMODALY
Envoyé : mercredi 9 juillet 2003 17:27
À : [EMAIL PROTECTED]
Objet : Help to a new FreeRADIUS user
Hello,
I will wish to use the FreeRADIUS (it is within a use in
company). I downloaded the file
freeradius-snapshot-20030708.tar.gz, I
I use freeradius 0.8.1 on a RedHat 7.3 .
I'm using mysql for store password-user and for accounting log.
This is how I do the test:
time /usr/local/freeradius/bin/radclient -q -s -f rad.test x.x.x.x auth
testing
Total approved auths: 55
Total denied auths: 6
real
Hi frds
i m having few questions regarding freeradius
server.
1 when we run ./radiusd without any option
it runs lt-radius that we can see from ps -ef
command.
how to see how much RAM size does it take (run time memory use
of radius server)
i tried #cat /proc/meminfo and also cat
for just authentication and
authorization purpuse (main if We dont want accounting facility)
./configure --help
this lists all the stuff you can and cant do
..the other questions are FAQ/Doc and google :-)
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Roberto Pioli [EMAIL PROTECTED] wrote:
time /usr/local/freeradius/bin/radclient -q -s -f rad.test x.x.x.x auth
testing
Total approved auths: 55
Total denied auths: 6
real0m14.453s
The client is doing a LOT of work unrelated to sending RADIUS
requests.
Pradeep Rai [EMAIL PROTECTED] wrote:
2 how shall we run ./configure to install freeradius for just
authentication and authorization purpuse (main if We dont want
accounting facility)
You don't. If you don't use accounting, it won't take any
resources.
3 which conf or normal text files
Running freeradius-0.8.1/Mysql-3.23.56 and authenticating dialup user's
with radcheck we cannot log sessions in the radacct database.Did we miss a radius/sql
config file entry somewhere or file permission,
IP table rule?My errors are:
Thu Jul 3 08:46:06 2003 : Error: Invalid operator for item
Please, Help me.
I have made everything what the file says to rlm_sql_counter to use the
counter, but when I execute radiusd - X says to me:
ERROR: Cannot find a configuration entry for module sql.
What is this
--
_*Liyuán García Caballero*_
*Consultor Informático*
*ESI, Ciego de Ávila
Yasser Ahmed Hosny [EMAIL PROTECTED] wrote:
I am Freeradius 0.8.1 and I am writing accounting records to an Oracle
DB ver 8i. If the Database is down, the Freeradius give a segmentation
fault error and it dies also. I've tried also to point to another
database as a fail-over option, but the
Sorry about the lateness of this, but perhaps this will be useful to
someone somewhere:
On 21 Apr 2003, Sungwon Ha wrote:
Hi!
I have a question about an access denied message from RADIUS. I was using RADIUS for
EAP-TLS authentication with Window XP (service pack 2). But XP was denied because
that if I am using the same scenario (database
fail-over) with Authentication the Freeradius did not fail.
Can anyone help in this regard?
Regards
Yasser Ahmed Hosny
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
At 10.13 20/06/03 -0500, you wrote:
I don't use rlm_eap but suggest you read src/radiusd/doc/rlm_eap. It
explains exactly what your problem is, (e.g. At least one EAP-Type
sub-stanza should be defined as above, otherwise the server will not know
what type of eap authentication mechanism to be
the newuser
page it is keeping quiet.
can any one help me in making things ok.
mysql is running and raidus is also running fine whihc
i was able to find out by running the radius in
debugging mode using ./radiusd -x
i am really very new to Linux and just started to do
the things...
if any one can help
:
rlm_eap: Unsupported EAP_TYPE 1
but I'm not able to understand it.
Any hint/help? :)))
Thanks in advance.
Bye,
Luca
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
At 09:35 AM 6/20/2003, you wrote:
I'm trying to set up a configuration where the freeradius server
authenticates win 2000 clients in a wireless lan with cisco aironet 350.
(Sorry for this long mex)
My forbidden dream is ldap, but ... for the moment eap is enough.
Here are the main portion of
hi,
First off get teh radius book from o'reilly. Next read all the documentation for
installing and using freeradius. As for which linux, I use FreeBSD
and it runs really well. If you are to use linux I would use Slackware. Key step,
READ, READ, and read some more.
FreeBSD is BSD, its
FreeBSD is BSD, its not Linux. sorry, just really had to say that.
alan
Actually, Alan, I think FreeBSD users would be a little more insulted at the
mere suggestion that they are at all similar to Linux ;-)
It reminds me of the mug from ThinkGeek that was advertised as, My coffee
is more
= No
There is a realm.net entry in the proxy.conf file but again, I don't
want to add a realm there as I want it to proxy using the DNIS.
I know this is quite a big question but I would greatly appreciate any
help all of you could find the time to give.
Thanks in advance
- List info/subscribe/unsubscribe? See
Ossama Suleiman wrote:
you should add your entry not to the users file but to acct_users file:
DEFAULTCalled-Station-Id = 8145550010, Proxy-To-Realm :=
realm.net
hope that helps
regards,
ossama
Thanks a million Ossama.that got it! The only other question I have
is about the
Try: Called-Station-Id =~ 0010$
Or some other nice regex.
You could also use huntgroups, that limits the number of entries in your
users / acct_users files...
Regards,
Chris
On Wed, 2003-06-18 at 20:56, Scotty B. Lowe wrote:
Ossama Suleiman wrote:
you should add your entry not to the
-Station-Id == 8145550010, Proxy-To-Realm := realm.net
Fall-Through = No
There is a realm.net entry in the proxy.conf file but again, I don't
want to add a realm there as I want it to proxy using the DNIS.
I know this is quite a big question but I would greatly appreciate any
help all of you
Title: group_member_query help needed
Hello,
Does anyone know how to use the "group_member_query" section of the sql.conf file?
I would like to group my data into files based on the usergroup's GroupName.
For example, if I have a group called "Boston", I would like a
for dial up
users.
I am completely unaware of RADIUS,LDAP and mysql.
They want to use FREERADIUS,OPENLDAP from netscape and mysql.
What shoud be the starting point. Which favour of Linux will be far suitable
for wirelss applications?
Any help will be much appreciated.
Thanks,
Sagar
-
List info
favour of Linux will be far
suitable
for wirelss applications?
Any help will be much appreciated.
Thanks,
Sagar
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
will be used for Wireless access for dial up
users.
I am completely unaware of RADIUS,LDAP and mysql.
They want to use FREERADIUS,OPENLDAP from netscape and mysql.
What shoud be the starting point. Which favour of Linux will be far suitable
for wirelss applications?
Any help will be much appreciated.
Thanks
for dial up
users.
I am completely unaware of RADIUS,LDAP and mysql.
They want to use FREERADIUS,OPENLDAP from netscape and mysql.
What shoud be the starting point. Which favour of Linux will be far suitable
for wirelss applications?
Any help will be much appreciated.
Thanks,
Sagar
Go here
see www.freeradius.org read the faq, and subscribe to the list.
att.
Mauricio
- Original Message -
From: Sagar Bikebits [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, June 13, 2003 3:21 AM
Subject: Require Urgent Help
Hi,
I have started a new job in Linux.
I have been
.
They want to use FREERADIUS,OPENLDAP from netscape and mysql.
What shoud be the starting point. Which favour of Linux will be far
suitable
for wirelss applications?
Any help will be much appreciated.
Thanks,
Sagar
-
List info/subscribe/unsubscribe? See http://www.freeradius.org
Dave Mason [EMAIL PROTECTED] wrote:
I briefly asked about WEP keys a while back, and Alan referred me to the
mppe code in rlm_mschap. I was wondering if I could get a quick comment
on how this differs from the mppe code in rlm_eap_tls. That code
appears to use an SSL session, while the
authentication? Thanks
Regards,
Paul Carugati
-Original Message-
From: Oliver Graf [mailto:[EMAIL PROTECTED]
Sent: Monday, June 02, 2003 10:17 AM
To: [EMAIL PROTECTED]
Subject: Re: radtest help
On Mon, Jun 02, 2003 at 07:53:07AM -0500, Carugati Paul-APC050 wrote:
Thank you for this however I
]
-Original Message-From: Robin Garbutt
[mailto:[EMAIL PROTECTED] Sent: Friday, May 30, 2003 4:23
AMTo: [EMAIL PROTECTED]Subject: RE:
radtest help
have
you tried:-
http://www.mastersoft-group.com/products/dialways_std.asp
as a
test client for windows? It proper does
Title: Message
Hi Paul,
Try using the NTRADPING tool from the site www.dialways.com
Regards,
Biswajeet
- Original Message -
From:
Carugati Paul-APC050
To: '[EMAIL PROTECTED]'
Sent: Monday, June 02, 2003 6:23 PM
Subject: RE: radtest help
Thank you
On Mon, Jun 02, 2003 at 07:53:07AM -0500, Carugati Paul-APC050 wrote:
Thank you for this however I am already using this as a Windows RADIUS test
tool. I need a command line version. Any additional information?
Is it possible that you use an old version? cvs radtest does not strip
/ from
Hi,
I need some help building WEP keys (MS-MPPE-Send-Key and
MS-MPPE-Recv-Key). First, from other material I read here on the list,
I understand there are static and dynamic keys. I checked the RFC but
didnt see this mentioned. I assume dynamic keys are re-issued with
every session? I need
Hi, I am presently testing on eap-tls with XP as client and Cisco 340 AP.The FR server breaks down after its sends the Access Challenge message. The TLS Handshake does not start off ? Please help me. I dont know if the problem is with opennsl in establishing a TLS handshake. i'm using the openssl
Title: Message
Is anyone very
knowledgeable about the radtest program? I am trying to use it to test auth to
radius server and when a pass "Domain/username" it always strips out the "/"
character in the packet. Please help!
Thanks,
Paul
Carugati
2003 20:12To:
[EMAIL PROTECTED]Subject: radtest
help
Is anyone very
knowledgeable about the radtest program? I am trying to use it to test auth to
radius server and when a pass "Domain/username" it always strips out the "/"
character in the packet. Please help!
Dear Alan DeKok,
--Thursday, March 27, 2003, 2:39:42 PM, you wrote to [EMAIL PROTECTED]:
AD Try the latest CVS snapshot. I've re-written rlm_mschap to be
AD smaller, simpler, and to have significantly more debug messages.
AD It won't look at /etc/smbpasswd any more, but that's probably a
On Fri, Mar 28, 2003 at 11:51:36AM +0300, 3APA3A wrote:
--Thursday, March 27, 2003, 2:39:42 PM, you wrote to [EMAIL PROTECTED]:
AD Try the latest CVS snapshot. I've re-written rlm_mschap to be
AD smaller, simpler, and to have significantly more debug messages.
AD It won't look at
Frank Cusack [EMAIL PROTECTED]wrote:
On Fri, Mar 28, 2003 at 11:51:36AM +0300, 3APA3A wrote:
/etc/smbpasswd is really not required and was only for compatibility
(anyway it should be noted in Release Notes for peoples who upgrade
their RADIUS versions).
I've done that, and added
101 - 200 of 617 matches
Mail list logo
