On Fri, Mar 28, 2003 at 06:34:31AM -0500, Alan DeKok wrote:
Frank Cusack [EMAIL PROTECTED]wrote:
On Fri, Mar 28, 2003 at 11:51:36AM +0300, 3APA3A wrote:
/etc/smbpasswd is really not required and was only for compatibility
(anyway it should be noted in Release Notes for peoples
Dear Alan DeKok,
--Friday, March 28, 2003, 2:34:31 PM, you wrote to [EMAIL PROTECTED]:
AD To put it another way, what is the gain in having rlm_mschap read
AD /etc/smbpasswd?
I agree. Since 0.4 we warn people smbpasswd support in rlm_mschap is
outdated and will be removed in future
3APA3A [EMAIL PROTECTED] wrote:
I agree. Since 0.4 we warn people smbpasswd support in rlm_mschap is
outdated and will be removed in future versions. So it's time to remove
it.
Done. Can you please double-check the module to ensure I didn't
break anything?
I've just re-added the
In mysql table Radgroupreply I have
id GroupName Attribute Value op prio
problem is this what the heck is prio
IT WONT LET ME ENTER DATA WITH OUT SOME THING IN THIS FEILD
and i have know idea what to use...
-
List info/subscribe/unsubscribe? See
unlikely from all variants.
Hi
Thanks for all your help so far. Given then that no authentication schema
is available is this because of a invalid MS-CHAP-Challenge and
MS-CHAP2-Response pair. If so is there any software to manually generate
the pairings so that the server can be tested
Guy Warner [EMAIL PROTECTED] wrote:
Thanks for all your help so far. Given then that no authentication schema
is available is this because of a invalid MS-CHAP-Challenge and
MS-CHAP2-Response pair. If so is there any software to manually generate
the pairings so that the server can
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Guy Warner
Sent: Thursday, March 27, 2003 5:09 PM
To: [EMAIL PROTECTED]
Subject: Re[2]: Help needed with MS Chap v2
At 19:47 26/03/2003 +0300, you wrote:
Dear Guy Warner,
This line simply notifies you
Hi,
I am using radius version 0.7 (stable) with mysql and a CISCO 3640 as NAS.
The configuration work fine but I deal with a problem lately with Timeout
attributes. Here is an examples:
Radius Access-Accept packet attributes:
Port-Limit = 1
Framed-Protocol = PPP
Framed-Pool = 255.255.255.254
/131/8.html
bye
- Original Message -
From: Andrew Kelaidis [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, March 26, 2003 12:27 PM
Subject: Timeout and Cisco 3640.Please help!
Hi,
I am using radius version 0.7 (stable) with mysql and a CISCO 3640 as NAS.
The configuration
On FreeRadius-0.8.1,
What situation will lead to radwho doesn't
show the location info of supplicant ?
In my case, nester martin have their own IP addr.
Regards,
nester
[EMAIL PROTECTED] bin]# ./radwho -r
Login Name What TTY When From Location
Hi All,
I'm trying to get FreeRadius to work with my
wireless Avaya Access Points. Is anyone else doing this? There's very little
documentation from Avaya regarding wireless, and I'm hoping to get any leads at
all!
Thanks
Matt AshfieldNetwork Analyst -
ITSUniversity of New Brunswick(506)
Hi
I am trying to set up a Freeradius 0.8.1 server to authenticate users with
MS Chap v2. The information about each user is obtained from an LDAP server.
The requests for authentication are being received via a proxy server.
The problem is that all requests to authenticate a user result in
Dear Guy Warner,
Authentication fails because of username or password mismatch. It may be
if packet is corrupted, if realm is not stripped from username or
password contains non-ASCII characters.
--Wednesday, March 26, 2003, 7:10:32 PM, you wrote to [EMAIL PROTECTED]:
GW Hi
GW I am
Guy,
Do the LDAP server logs show anything?
josh.
On Wed, 2003-03-26 at 16:10, Guy Warner wrote:
Hi
I am trying to set up a Freeradius 0.8.1 server to authenticate users with
MS Chap v2. The information about each user is obtained from an LDAP server.
The requests for authentication are
PROTECTED]
Sent: Wednesday, March 26, 2003 4:19 PM
Subject: Re: Help needed with MS Chap v2
Dear Guy Warner,
Authentication fails because of username or password mismatch. It may be
if packet is corrupted, if realm is not stripped from username or
password contains non-ASCII characters
Warner
GW - Original Message -
GW From: 3APA3A [EMAIL PROTECTED]
GW To: Guy Warner [EMAIL PROTECTED]
GW Sent: Wednesday, March 26, 2003 4:19 PM
GW Subject: Re: Help needed with MS Chap v2
Dear Guy Warner,
Authentication fails because of username or password mismatch. It may
I have the same problem below as this previous message posted below.
Did this ever get solved? I need help with:
WARNING: Attempt to use unknown xlat function or attribute in string
%{sqlcca3:
as in the original message below.
Ed
original message From Mon, 23 Dec 2002 03:33:47 -0800
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
and there is an interesting
Client card (Sony Ericsson GC79) for EAP-SIM wireless access:
http://news.zdnet.co.uk/story/0,,t298-s2131381,00.html
Is there anyone who can help me?
Thanks!
Davide Beligni
Web Factory
NETikos S.p.A.
Via Matteucci, 34/B
56124 Pisa
Tel.: + 39 050 968609
Mobile: + 39 338 4665419
Fax
help
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hello Sir,
we do have freeradius server in Redhat 6.1 , in
radacct our radius server sending
the multiple user entry because of that we the
billing not works properly and
our log file size increased continuosly... and user
billing going wrong ..so can
u guide us what is the problem , how
://www.ssnetcom.com
- Original Message -
From:
raaj
To: [EMAIL PROTECTED]
Sent: Friday, March 14, 2003 9:38
AM
Subject: radius help
Hello Sir,
we do have freeradius server in Redhat 6.1 , in
radacct our radius server sending
the multiple user entry because
I am so close to getting the monthly time limit working and I just need a
little help. I have looked through the archives and have found things that
have brought me this far, however, I believe I am close. Does anyone have
any idea what I am doing wrong? Basically what I would like to do
On Wed, 5 Mar 2003, Bill Anderson wrote:
I am so close to getting the monthly time limit working and I just need a
little help. I have looked through the archives and have found things that
have brought me this far, however, I believe I am close. Does anyone have
any idea what I am doing
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Kostas
Kalevras
Sent: Wednesday, March 05, 2003 2:23 PM
To: [EMAIL PROTECTED]
Subject: Re: Help Please - Monthly Time Limit
On Wed, 5 Mar 2003, Bill Anderson wrote:
I am so close to getting the monthly time limit working
PROTECTED]
Subject: Re: Help Please - Monthly Time Limit
On Wed, 5 Mar 2003, Bill Anderson wrote:
I am so close to getting the monthly time limit working and I
just need a
little help. I have looked through the archives and have found
things that
have brought me this far, however, I
when i run radiusd -X , as error occurs as follows:
rlm_sql (sql): Driver rlm_sql_oracle (module
rlm_sql_oracle) loaded and linked
rlm_sql (sql): Attempting to connect to
[EMAIL
PROTECTED]:/(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))
rlm_sql
and
proxy.conf
That is how I got mine to work.
-Vic
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Nguyen Nhu Hao
Sent: Saturday, March 01, 2003 9:23 PM
To: [EMAIL PROTECTED]
Subject: Re: help me
Hi Tarvid,
Thank a lot for your kindness.
I followed
a lot for you help [EMAIL PROTECTED]
raddb]# /usr/local/sbin/radiusd -XStarting - reading configuration
files ...reread_config: reading
radiusd.confConfig: including file:
/usr/local/etc/raddb/clients.confConfig: including file:
/usr/local/etc/raddb/sql.conf main: prefix =3D "/usr/local&q
On Saturday 01 March 2003 11:32 pm, Nguyen Nhu Hao wrote:
Hi all,
I am a newbie with radius and unix, I would like to install freeradius =
in RedHat 7.1 and I use a router to authenicate via radius. I installed =
ok, but I could not authenticate success. I configured authentication =
use
Hi Tarvid,
Thank a lot for your kindness.
I followed as you showed me but I could not solve the problem. Could you
help me to find out the bug
I give you my router configuration here
pascal#show run
Building configuration...
Current configuration : 4169 bytes
!
version 12.1
service timestamps
Thx to Simon White for fast answer.
Would You help me with the following:
1) Operational Scheme:
[Cisco AS5300 voip] - [freeradius] - [postgresql]
2) What I need:
a) cisco AS5300 gets incomming call
b) AS 5300 sends to freeradius information about this call
c) freeradius queries postgre
19-Feb-03 at 12:54, lakris ([EMAIL PROTECTED]) wrote :
1) Operational Scheme:
[Cisco AS5300 voip] - [freeradius] - [postgresql]
2) What I need:
a) cisco AS5300 gets incomming call
b) AS 5300 sends to freeradius information about this call
c) freeradius queries postgre for call's
Victor Churchill [EMAIL PROTECTED] wrote:
Does anyone have any sample configurations for
using freeradius with Cisco ??
Look in the 'doc' directory?
Now a login attempt which fails.
Ready to process requests.
rad_recv: Access-Request packet from host
Always when im check, show this
message, How can i do for work?
Above have logs of postmaster, radiusd
and radclient
Log of postmaster
-
DEBUG: database system was shut down
at 2003-02-19 15:33:25 BRT
DEBUG: checkpoint record is at 0/19D420
DEBUG: redo record is at
Zahara wrote:
Hello All
I am analysing a VoIP billing application. I need some info about a
few things. I'd appreciate all the help and details that you could
provide.
Here is what we need to do:
Our customers connect to our gateway/gatekeeper through IP or PSTN
(calling cards
with a
primary key or columns defined as 'unique'.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of leaobicalho
Sent: Wednesday, February 19, 2003 12:52 PM
To: [EMAIL PROTECTED]
Subject: Help-ME...radcheck: Permission denied
Always when im check, show
Hi everyone.
My problem is as follows:
I have a radius sw running on a windows machine with microsoft sql
server for storing the information.
I need to replace this machine with a linux server with freeradius and
ldap.
I was searching for information in the internet to get familiar with
ldap
Stella Korakaki [EMAIL PROTECTED] wrote:
I have a radius sw running on a windows machine with microsoft sql
server for storing the information.
I need to replace this machine with a linux server with freeradius and
ldap.
That's a good choice.
I was searching for information in the
Hello All
I am analysing a VoIP billing application. I
need some info about a few things. I'd appreciate
all the help and details that you could provide.
Here is what we need to do:
Our customers connect to our gateway/gatekeeper
through IP or PSTN (calling cards through IVR system). We
all the help and details that you could provide.
Here is what we need to do:
Our customers connect to our gateway/gatekeeper through IP or PSTN (calling cards
through IVR
system). We have 2 RADIUS servers. I still don't know which RADIUS server they're
going to be
though. We have a web
Chris,
My compiler is now 64 bit (with a bit of work), but I still can't link.
Any ideas? BTW: since I'm not subscribed to the list, can you reply all
so I can see it as well.
thanks,
--ck
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
At 04:28 PM 2/6/2003 -0500, Chayim I. Kirshen wrote:
Chris,
My compiler is now 64 bit (with a bit of work), but I still can't link.
Any ideas? BTW: since I'm not subscribed to the list, can you reply all
so I can see it as well.
Can you reprint the error you are seeing?
Also, can you show
Well, I solved the rlm_sql_oracle issue (thanks Chris):
Here's what I needed to do:
1. recompile my gcc for 64 bit. This means use a 32 bit gcc to
bootstrap binutils, and then create a 64 bit compiler.
2. export LD_LIBRARY_PATH=/lib:/path-to-compiler/lib
And that was great. Except I've got
At 04:51 PM 2/6/2003 -0500, Chayim I. Kirshen wrote:
Well, I solved the rlm_sql_oracle issue (thanks Chris):
Here's what I needed to do:
1. recompile my gcc for 64 bit. This means use a 32 bit gcc to
bootstrap binutils, and then create a 64 bit compiler.
2. export
-to/as --with-ar=/path-to/ar
3. OHOME=/path-to/oraclehome
LD_LIBRARY_PATH=/lib:/path-to-gcc/lib
export OHOME LD_LIBRARY_PATH
4. build freeradius:
- options are only specific to my install. nothing fancy occurred
5. deploy!
Thanks a tonne for all your help. I hope this list is useful
/tarka/bin/exec-program-wait: ./myperlscript: No such file or
directory
Exec-Program-Wait: value-pairs: Reply-Message += Hello, %u,
Exec-Program: returned: 0
My purpose is to run the perl script, rather than SH. And it seems this
is the only way I can figure out how.
Can any help? Thanks.
Chhai
help? Thanks.
Exec-Program-Wait = '/your/perl/script' ?
@+
--
DouRiX
[MISERICORDE, n. A dagger which in mediaeval warfare was used by the
foot
soldier to remind an unhorsed knight that he was mortal. -- Ambrose
Bierce]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list
Hi there,
I'm trying to compile rlm_sql_oracle for solaris. I've got the oracle9i
client installed and when linking I get an error because of the ELFCLASS
of the file. I've printed the output of the make below. Hopefully,
someone can help me!
Oh, I've got GNU make, the GCC, and am running
At 11:48 AM 2/5/2003 -0500, Chayim I. Kirshen wrote:
Hi there,
I'm trying to compile rlm_sql_oracle for solaris. I've got the oracle9i
client installed and when linking I get an error because of the ELFCLASS
of the file. I've printed the output of the make below. Hopefully,
someone can help
Hi all
Any guy know how can i test a radius whith ldap auth ?
i make a configure, make, make install and configure a radius.conf
hes is started ok
but i donk know how can i test the ldap authentication ...
any can help-me
thanks a lot
Alexandre
.+-wèþ˱Êâmïî˱Êâmäzm§ÿðÃëyêÚv
hi philip
thanks for the point, david probably just has to check the extensions
and other things. however, it seems that the server certificate isn't
accepted, not the client certificate.
something has to be wrong, since in my case, too, it worked fine with
cisco and orinoco equipment, since
David, Artur,
This problem appears to be caused by having the Server Authentication
and
Client Authentication properties set in the certificate. If you disable
all
extended certificate properties except the Client Authentication in the
Client certificate on the XP machine the EAP authentication
).
If it possible that you could not result examples skripts by means
of which it is possible to make the given procedures!
Thenk You for you help !
--
Best regards,
Panchenko Mikhael
Master Sviaz
Sank-Petersburg
+7(812) 346-8101
www.master.ru
-
List info/subscribe/unsubscribe? See http
hi David
ok, it's good news then... if you followed exactly the steps, it should
work fine.
to find the error, just put the same certificate which is available at
the server side on your XP machine and open it using the crypto
extensions (double-click). XP should say you what is missing. the
for you help !
Sank-Petersburg
SankT??? :-)
best wishes
artur
--
Artur Hecker
De'partement Informatique et Re'seaux, ENST Paris
http://www.infres.enst.fr/~hecker
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi All,
I've downloaded freeradius, and installed the
server. I've also brought up an apache web server with the mod_auth_radius
module loaded. Both are compiled and installed.
My problem is I'm a complete newbie to this
software. I've been reading the documentation that came with the
help!
Hi All,
I've downloaded freeradius, and installed the server. I've also brought
up an apache web server with the mod_auth_radius module loaded. Both are
compiled and installed.
My problem is I'm a complete newbie to this software. I've been reading
the documentation that came
January 2003 18:17To:
[EMAIL PROTECTED]Subject: newbie needs
help!
Hi All,
I've downloaded freeradius, and installed the
server. I've also brought up an apache web server with the mod_auth_radius
module loaded. Both are compiled and installed.
My problem is I'm a complete
The problem has been partially solved (or let's say: narrowed).
Somehow the server's certificate is not accepted by the XP-supplicant.
If the Validate server certificate check box is unchecked, the authentication
succeeds. To leave the server's certificate unvalidated is not very desirbale
hi
David Baer wrote:
hi, thanks for looking at the matter, Artur.
in fact, unless you shortened your post, there seems to be two
requests one after another or am i wrong? because radius actually
doesn't do anything about the wrong request. it denies the next
one... well, it's perhaps
with img 2.0.10 installed.
thanks for any help,
david
rad_recv: Access-Request packet from host 10.56.56.201:6001, id=95, length=180
User-Name = Hera
NAS-IP-Address = 10.56.56.201
Called-Station-Id = 00-02-2d-48-6d-89
Calling-Station-Id = 00-05-3c-06-6e-61
NAS
Hi Jeffrey,
Do you work well via md5? I cannot work fine with ap-2000 too? :(
I guess it is AP problem!
I don't think it's an AP problem, because Raymon McKey
(http://www.impossiblereflex.com/8021x/eap-tls-HOWTO.htm) is working with the
same AP. i never tried with md5, did it work with you?
hi
I don't think it's an AP problem, because Raymon McKey
(http://www.impossiblereflex.com/8021x/eap-tls-HOWTO.htm) is working
with the same AP. i never tried with md5, did it work with you?
and you probably can't since you use XP SP1 which does not offer EAP/MD5
for wireless anymore :)
do
hi,
thanks for looking at the matter, Artur.
in fact, unless you shortened your post, there seems to be two requests
one after another or am i wrong? because radius actually doesn't do
anything about the wrong request. it denies the next one... well, it's
perhaps normal.
well strange is (or
.
The thing is that all tls handshake passed and then it seems that the supplicant backs
off...
I'm using Service Pack 1 and a Orinoco 2000 AP with img 2.0.10 installed.
thanks for any help,
david
rad_recv: Access-Request packet from host 10.56.56.201:6001, id=95, length=180
User-Name = Hera
Even though I got the initial accetance from the Freeradius , server doesnt
authenticate, Could certicates cause this problem?
Thanks ...
SECO
+ LD_LIBRARY_PATH=/usr/local/openssl/lib
+ LD_PRELOAD=/usr/local/openssl/lib/libcrypto.so
+ export LD_LIBRARY_PATH LD_PRELOAD
+
chris [EMAIL PROTECTED] wrote:
I've read doc/configurable_failover and gone through a ton of messages in
the archives. Right when I think I understand it, I see another message
that conflicts with it. Seems that alot has changed over the versions.
Nothing has changed in the configurable
all line 319
to humk failed #15
and then I did make and make install (in same dir
/usr/local/src/freeradius ) but
still it says you cant add sql as authentication. so I assume I did not
add patch in correct fashion. if you can please comment on it.
and I am greatful to you for this help
not
having any luck with this and it would probably just be easier to see the
whole thing rather than go back and forth with my config and a working one
section by section. I'll just adapt someone's to my specifics...
Thanks to anyone how can help!
Chris Bunnell
-
List info/subscribe/unsubscribe
If you do not know how to apply the patch, you likely do not need the patch.
Please ask questions on the list.
- Original Message -
From: Mohammad Shohab Baig [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 08, 2003 5:25 PM
Subject: adding sql auth patch. please help
hi ..
we have installed FreeRadius 0.8 on Redhat Linux 7.3 with MySQL for radius
AAA.
have been tested and working properly with rlm_counter.
my question is what must i do for disconnecting users in a specify time if
they didn't receive any data byte or didn't receive an IP address from RAS.
or
: Wednesday, January 08, 2003 11:32 PM
Subject: Re: adding sql auth patch. please help
Sorry. I just asked how to apply your patch and if I dont know how to
apply
it, does it make difference. and plus I did ask this question on mailing
list. I thought as you wrote the patch so it will be efficeint to ask
together???Hope you can help me.
you do not use to put the auth type explicitly, it should be put by the
authorize section automatically, depending on the user config e.g. in
the sql data base.
so, in radiusd.conf:
authorize {
sql
}
authenticate {
eap
}
in users:
userAuth-Type
you do not use to put the auth type explicitly, it should be put by the
ahem, i meant: you do not need to put the auth-type
sorry. never write mails in industry meetings :)
ciao
artur
--
_
Artur Hecker
the
answer. Whether MySQL can only be used with 'AUth-Type=PAP' together? What can I do to
use MySQL and EAP authentication together???Hope you can help me.
wanglu
[EMAIL PROTECTED]
2003-01-06
-
List
Hello,
I just started to try the FreeRADIUS with LDAP. Since I am new to LDAP I
have encourted many problems and finaly wanted to consult to the users who
done LDAP+Radius.
Can you send simple one user examples files of:
slapd.conf
ldap.conf
users
radiusd.conf
or just mentioning the required
i need help
table radgroupcheck:
mysql select * from radgroupcheck where
GroupName='35Horas';++---+-+++|
id | GroupName |
Attribute | op |
Value |++---+-+++| 15
| 35horas | Max-Monthly-Session
I'am using the freeradius 0.5 because I have tried 0.8
and cannot manage the ldap module. Now I think my
problem is not so big but I couldn't solve it. Here is
my output from radius -x command. Could anybody help
me to solve this problem. The user 'a' and password
'dWdy' are valid in the ldap
This is strange. I can login locally but I cannot dialup? HELP!
[wisdom@radius wisdom]$ radtest [EMAIL PROTECTED] con10047
localhost 1 testing123
Sending Access-Request of id 145 to 127.0.0.1:1812
User-Name = [EMAIL PROTECTED]
User-Password =
\204=\237\225\337\364\260\326$.\251
On Mon, Dec 16, 2002 at 10:03:26AM +1100, Iq wrote:
Hi everyone,
Need a little help with radrelay. I have two NAS boxes (a
portmaster and Ascend). Both of them authenticate customers from two radius
servers (radius-0.8). One primary and other secondary. I want to run
Hi everyone,
Need a little help with radrelay. I have two NAS boxes (a
portmaster and Ascend). Both of them authenticate customers from two radius
servers (radius-0.8). One primary and other secondary. I want to run
radrelay. My questions are
as it says in doc/radrelay
1
hi !
I'm using freeradius 0.8.1 with mysql-3.23.49-3.
It' s working ok, with authentication and accounting.
but i'd like to add a SQL request in the sql.conf file (
accounting_stop_query )
the original query is :
accounting_stop_query = UPDATE ${acct_table2} SET AcctStopTime = '%S',
At 10:13 AM 12/12/2002 +0100, Genoud Richard wrote:
hi !
I'm using freeradius 0.8.1 with mysql-3.23.49-3.
It' s working ok, with authentication and accounting.
but i'd like to add a SQL request in the sql.conf file (
accounting_stop_query )
the original query is :
accounting_stop_query = UPDATE
Chris Parker a écrit:
Not presently. You can create another instance of an 'sql' module that
executes the second accounting query.
IE:
sql SQL1 {
}
sql SQL2 {
}
accounting {
acct_unique
detail
SQL1
SQL2
}
thank you ! that's a much better idea than mine !
( i
radiusd: FreeRADIUS Version 0.9-pre, for host i686-pc-linux-gnu, built on Dec
10 2002 at 08:24:25
sweet Thankyou!
[EMAIL PROTECTED] wrote:
When i start freeradius i get this message below.
I can authenticate through mysql using -X or -xx and can still
authenticate after calling radiusd.
ULT at 42
Sending Accounting Ack of id 6 to 10.5.108.73 (nas alefalcao)
The Script is working fine, if I run "/usr/lib/cgi-bin/autentica.pl alfspsp" the account is saved.
Is it possible anybody help me?
Alex
[EMAIL PROTECTED] wrote:
When i start freeradius i get this message below.
I can authenticate through mysql using -X or -xx and can still
authenticate after calling radiusd.
...
Grab the CVS snapshot tomorrow. It should have the bug fixed.
Alan DeKok.
-
List info/subscribe/unsubscribe?
of fun try'in to figure this one out
please help
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
06, 2002 4:50 PM
To: [EMAIL PROTECTED]
Subject: RE: God, I need help getting this thing running on Redhat 8.0!
Have you installed all the prerequisite libraries? They are listed on the
web site.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Ken
spamdump [EMAIL PROTECTED] wrote:
I must be dumb. I cannot get this thing (freeradius-0.8) to compile under
Redhat 8.0. I've got a fresh, default, installation. Here is just the output
of ./configure. Now I know kerberos is installed. I know that MySQL is
intalled. I've got to be missing
/home/Ken/freeradius/missing: Unknown `--run' option
Try `/home/Ken/freeradius/missing --help' for more information
configure: warning: `missing' script is too old or missing
cat: ./config.h.in: No such file or directory
configure: warning: the comm_err library isn't found!
configure: warning
Have you installed all the prerequisite libraries? They are listed on the
web site.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Ken Henrich
Sent: Friday, December 06, 2002 3:55 PM
To: [EMAIL PROTECTED]
Subject: God, I need help getting
/home/Ken/freeradius/missing: Unknown `--run' option
Try `/home/Ken/freeradius/missing --help' for more information
configure: warning: `missing' script is too old or missing
cat: ./config.h.in: No such file or directory
configure: warning: the comm_err library isn't found!
configure: warning
I realy apologize for posting this dummy question again to the list, but I
can't find solutions
What kind of info do I need to set in radreply table of MySql to avoid any
error in log file when I do not need to send any reply to the NAS. I act
only as remote proxed server with only user/password
Glomanet Informa - [EMAIL PROTECTED] wrote:
What kind of info do I need to set in radreply table of MySql to avoid any
error in log file when I do not need to send any reply to the NAS. I act
only as remote proxed server with only user/password auth.
You can add a dummy non-protocol
PROTECTED]
[mailto:[EMAIL PROTECTED]]Per conto di Alan DeKok
Inviato: giovedì 5 dicembre 2002 18.03
A: [EMAIL PROTECTED]
Oggetto: Re: radreply - I need help
Glomanet Informa - [EMAIL PROTECTED] wrote:
What kind of info do I need to set in radreply table of MySql to avoid
any
error in log file when I
any idea how to get the radius server to work to accept any IP address ,
private or public.
I did a search in the list for hour`s and on the web and I must admit that I
am a newbie to radius.
Any help would be great and sorry for my bad english
Mike
-
List info/subscribe/unsubscribe? See http
Alan Wong [EMAIL PROTECTED] wrote:
Therefore the question is, are there add on modules that can dynamically add
a user and generate a one time password?
No. Dynamically adding a user is something which is (in general)
not a good idea.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
or program to do that?
Thanks for the help in advance...
Alan Wong
_
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail
-
List info/subscribe/unsubscribe? See http
201 - 300 of 617 matches
Mail list logo
