eluna wrote:
As you can see the NAS-IP-Address attributes are different, and I need a
method to get the value of the accounting request because when I need to for
example deauthenticate a user, i need to know what access point is is
actually associated to. Any solutions or hints are very much
yagizozen wrote:
All the information of the users that connect and dc, is stored in the
db.daily file I suppose. But I can not open the file with notepad and see
which user had how many seconds of active sessions.
That's not how computers work. Do you open MP3s in Notepad to play them?
I
Hallo,
http://wiki.freeradius.org/ (or faq) returns:
Forbidden
regards Torsten
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Torsten Lehmann wrote:
http://wiki.freeradius.org/ (or faq) returns:
Forbidden
It works for me.
We upgraded the machine, and had a few problems with editing the wiki.
But it should be OK now.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hello,
noone with a hint?
Stefan
On 07.05.2012 11:13, Stefan Winter wrote:
Hi,
at a client's site, I have to some chopping off parts of User-Name,
pretty straightforward, but for some reason it doesn't work (2.1.12):
In inner-tunnel, authenticate, MSCHAPv2 for PEAP:
authenticate {
Hello Alan,
Torsten Lehmann wrote:
http://wiki.freeradius.org/ (or faq) returns:
Forbidden
* Alan DeKok al...@deployingradius.com [2012-05-09 09:44]:
It works for me. We upgraded the machine, and had a few problems with
editing the wiki. But it should be OK now.
for me it does not, I
On Wed, May 9, 2012 at 2:45 PM, Stefan Winter stefan.win...@restena.lu wrote:
Hello,
noone with a hint?
Might not be the direct cause for your problem, but I'm pretty sure
you're not supposed to put unlang blocks inside authenticate section.
Or at least it's not recommended.
Try moving it to
Stefan Winter wrote:
noone with a hint?
Hmm... the default return code for things in the authenticate
section is reject. And the update sections just pass through the
*previous* return code.
You might try this as a hack:
Auth-Type MS-CHAP {
ok
if (..) {
}
On 9 May 2012, at 09:51, Thomas Glanzmann wrote:
Hello Alan,
Torsten Lehmann wrote:
http://wiki.freeradius.org/ (or faq) returns:
Forbidden
* Alan DeKok al...@deployingradius.com [2012-05-09 09:44]:
It works for me. We upgraded the machine, and had a few problems with
editing the
On Wed, May 9, 2012 at 2:51 PM, Thomas Glanzmann tho...@glanzmann.de wrote:
Hello Alan,
Torsten Lehmann wrote:
http://wiki.freeradius.org/ (or faq) returns:
Forbidden
* Alan DeKok al...@deployingradius.com [2012-05-09 09:44]:
It works for me. We upgraded the machine, and had a few
It works for me too.
http://www.downforeveryoneorjustme.com/http://wiki.freeradius.org/
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Works for me..
On 5/9/2012 9:39 AM, Alan DeKok wrote:
Torsten Lehmann wrote:
http://wiki.freeradius.org/ (or faq) returns:
Forbidden
It works for me.
We upgraded the machine, and had a few problems with editing the wiki.
But it should be OK now.
Alan DeKok.
-
List
Hello everyone,
* Thomas Glanzmann tho...@glanzmann.de [2012-05-09 09:58]:
for me it does not, I still have the problem. If you want I can record
the problem for you as flash video. I'm using github to authenticate.
I have problem editing the page, accessing is fine. But Arran seems to
fix
Thank you Alan,
I couldnt find that perl file in my machine. Is there any way to see the
content of db.daily with the use of any program in the windows environment
so that I can copy the file to my windows and use that tool to look inside.
--
View this message in context:
Hi,
yet another subtlety I didn't know of... I'm checking with my client
whether either moving it to authorize or putting the ok in front will
do the trick.
I'll let the list know of the outcome so that the collective list
intelligence a.k.a. archive will have the answer for later.
Thanks,
On Wed, May 9, 2012 at 3:54 PM, yagizozen yagizo...@yahoo.com wrote:
Thank you Alan,
I couldnt find that perl file in my machine. Is there any way to see the
content of db.daily with the use of any program in the windows environment
so that I can copy the file to my windows and use that tool
On Wed, May 9, 2012 at 3:54 PM, yagizozen yagizo...@yahoo.com wrote:
Thank you Alan,
I couldnt find that perl file in my machine.
It's available on FR source code, as mentioned already by Alan:
http://freeradius.org/download.html
Or read the latest development version directly from github:
yagizozen wrote:
I couldnt find that perl file in my machine.
That's not a good response.
The file is distributed with FreeRADIUS. Go look in the FreeRADIUS
distribution archive for it.
Is there any way to see the
content of db.daily with the use of any program in the windows
On 9 May 2012, at 10:30, Thomas Glanzmann wrote:
Hello everyone,
* Thomas Glanzmann tho...@glanzmann.de [2012-05-09 09:58]:
for me it does not, I still have the problem. If you want I can record
the problem for you as flash video. I'm using github to authenticate.
I have problem editing
Hello,
According to proxy.conf asynchronous configuration is disabled.
I want to manage the realms by setting parameter synchronous or
asynchronous, means that switch the configuration each other. Asynchronous
is needed to queue the accounting packages, retransmission etc.
Do you have any comment
You are right Sir,
I could not find it in my server because it didnt installed I guess when I
install FR with yum install freeradius2 freeradius2-utils
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/Session-Timeout-Monitoring-from-db-daily-tp5693089p5697104.html
Sent
I do not have the modules folder under /usr/src. How can I install the
modules folder to my machine but do not change any other file contents under
/etc or /var/log/radius
--
View this message in context:
mimir wrote:
According to proxy.conf asynchronous configuration is disabled.
I want to manage the realms by setting parameter synchronous or
asynchronous, means that switch the configuration each other. Asynchronous
is needed to queue the accounting packages, retransmission etc.
Do you have
yagizozen wrote:
I do not have the modules folder under /usr/src. How can I install the
modules folder to my machine but do not change any other file contents under
/etc or /var/log/radius
Download the tar file from our FTP site. See http://www.freeradius.org/
Or, read the link that
We want radius support both modes and update realms configuration as
sync/async.
I think in asyncron mode we can send/proxy accounting packets in a period
not instantly. Because of this, we want to use async mode.
--
View this message in context:
On 05/09/2012 07:17 AM, yagizozen wrote:
You are right Sir,
I could not find it in my server because it didnt installed I guess when I
install FR with yum install freeradius2 freeradius2-utils
The reason the rad_counter.pl is only in a source distribution is
because it's not installed via
On Wed, May 9, 2012 at 7:13 PM, mimir
erdem.mimiro...@alcatel-lucent.com wrote:
We want radius support both modes and update realms configuration as
sync/async.
I think in asyncron mode we can send/proxy accounting packets in a period
not instantly. Because of this, we want to use async mode.
Hello,
According to the document, freeradius supports SNMP and can send snmp trap.
But, when I check the MIBs, I could not find event based definitions.
According to my scenario, I want to send trap,
For example
1-) When one of fail-server is dead ( with clear live also)
2-) When one of
John Dennis wrote:
The reason the rad_counter.pl is only in a source distribution is
because it's not installed via the install target in the Makefile. If
rad_counter.pl is meant to be a user utility it should be installed as
part of make install.
That's probably a good idea.
I'll go add
mimir wrote:
We want radius support both modes and update realms configuration as
sync/async.
You already said that. Saying it again doesn't help.
I think in asyncron mode we can send/proxy accounting packets in a period
not instantly.
What does that mean?
Because of this, we want to
mimir wrote:
According to the document, freeradius supports SNMP and can send snmp trap.
Which document?
But, when I check the MIBs, I could not find event based definitions.
See the mibs directory in the git master branch.
According to my scenario, I want to send trap,
For example
Hi,
both methods worked: moving into authorize (but after calling the suffix
module, which sets Stripped-User-Name), and also the ok hack in
authenticate.
We chose to move to authorize, as it's more easily understandable.
Thanks for the help!
Greetings,
Stefan Winter
On 09.05.2012 11:17,
helloo everyone,
I manage to do it finally :)
THANK YOU Very much
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/Session-Timeout-Monitoring-from-db-daily-tp5693089p5697405.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List
Hello,
In general I can accounting packets to multiple servers from one radius
servers.
I set a solution with replicate module + one by one proxy configuration. (
because I want to see some logs regarding home servers)
I do not know very well how radius behaves in sync and async mode? But I
Sorry Alan, not document, according to web site native snmp support is
supported. Am I right?
I am not a developer so checking source code is diffiucult/different for me.
I asked if we can send snmp traps to NMS systems if any type of failure,
unsuccessful proxy message etc.
Is it possible or
Hello Alan,
Torsten Lehmann wrote:
http://wiki.freeradius.org/ (or faq) returns:
Forbidden
* Alan DeKok al...@deployingradius.com [2012-05-09 09:44]:
It works for me. We upgraded the machine, and had a few problems with
editing the wiki. But it should be OK now.
for me it
mimir wrote:
Sorry Alan, not document, according to web site native snmp support is
supported. Am I right?
Yes. But you asked about *traps*. Please use consistent terminology.
Traps are not supported in 2.1.12.
I am not a developer so checking source code is diffiucult/different for
mimir wrote:
In general I can accounting packets to multiple servers from one radius
servers.
Stop repeating that. I understand it already.
I set a solution with replicate module + one by one proxy configuration. (
because I want to see some logs regarding home servers)
I do not know
Steven Staples wrote:
I hate to jump on the me too bandwagon, but it is still also down for me,
with a 403 Forbidden code.
As Arran said, he's in the process of fixing it.
Please hold.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi! here is de debug.
FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Jan 5 2010
at 02:49:11
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute
Hi! here is de debug.
FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Jan 5 2010
at 02:49:11
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute
xadow20 wrote:
Hi! here is de debug.
Nope.
It doesn't show the server receiving any packets.
Post the debug output for THAT.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
I can't post all debug
http://freeradius.1045715.n5.nabble.com/file/n5697736/debug2.txt debug2.txt
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/mySQL-user-wifi-authentication-error-on-freeradius-tp5693432p5697736.html
Sent from the FreeRadius - User mailing list
On Wed, May 9, 2012 at 10:39 PM, xadow20 joaofigueired...@gmail.com wrote:
I can't post all debug
http://freeradius.1045715.n5.nabble.com/file/n5697736/debug2.txt debug2.txt
What do you get if you execute this query directly on your db?
SELECT id, username, attribute, value, op FROM
Hi!
With clear-text password it works.
I Thought it work with encripted password too.
Thanks
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/mySQL-user-wifi-authentication-error-on-freeradius-tp5693432p5698103.html
Sent from the FreeRadius - User mailing list archive at
Can anyone provide an answer? I have spent much time trying to make this work,
trying different things so if its not possible please let me know.
On 2012-05-08, at 5:05 PM, Mike lonetravel...@gmail.com wrote:
Hi guys,
I am setting an attribute in the auth section of my config . I am
Just an FYI (sorry if this has already been covered):
If you update FR via yum in CentOS or RedHat, as is usual practice with RPMs,
conf
files that have been modified are not overwritten, so the new version is
installed
with an .rpmnew suffix.
This works great for most of the config files, but
Hi Alan,
thanks for your reply but as far as i know nobody as edited our version of
radclient ?!
It was just a clean install done by one of my colleagues.
And when he installed it the only purpose of freeradius was for authentication.
We didn't even think about using CoA.
When you say edited,
Hi,
Can anyone provide an answer? I have spent much time trying to make this
work, trying different things so if its not possible please let me know.
we all have our day jobs to do i cant seem to find the original email
regarding thishave you looked at the debug log to see what is
Hi,
thanks for your reply but as far as i know nobody as edited our version of
radclient ?!
do yoi have multiple copies ont he server - ie do you have
it installed via an RPM install (for example) of an old verion of
freeradius
what does 'which radclient' tell you and what does eg 'locate
On 05/09/2012 02:53 PM, u...@3.am wrote:
Just an FYI (sorry if this has already been covered):
Ad nauseam, check the archives which also includes suggestions to
mitigate the issue.
If you update FR via yum in CentOS or RedHat, as is usual practice with RPMs,
conf
files that have been
51 matches
Mail list logo