Dear,
I wonder if the Freeradius to authenticate a client by IP number, without
using login and password, only the IP. If possible, how to do?
thank you
---
Marcelo
-
List info/subscribe/unsubscribe? See
Hi,
Please find below dictionary file for Proxim Wireless (http://www.proxim.com/)
vendor attributes.
Please include it.
=
# Proxim Attributes
VENDOR Proxim 841
BEGIN-VENDORProxim
# SU Management VLAN and
spoke briefly to the folks at Network
RADIUS, they told me that freeRadius includes the required db schema
for mySQL. When I installed mySQL 5.1, there was a db in there that I
didn't recognize, called information_schema, comprised of 28 tables.
Is this it, or is there something special I need
Hi,
I am in the process of setting up freeRADIUS on Mac OSX. We're a small
group looking into becoming a WISP. Can anyone tell me if there is a
RAS that runs on OSX?
The install of freeRADIUS itself seems to have gone smoothly, and I
installed MySQL 5.1 as well, no hitches. I have not, tho,
Don't be *too* helpful, my head may explode.
On Mon, Aug 3, 2009 at 5:25 PM, Ivan Kalikt...@kalik.net wrote:
I am in the process of setting up freeRADIUS on Mac OSX. We're a small
group looking into becoming a WISP. Can anyone tell me if there is a
RAS that runs on OSX?
The install of
Please forgive me as I'm a newbie to Radius. I've been reading FAQs and
archived mail list for three days and haven't seen a problem similar to
mine. ntlm_auth works as expected on the command line, however it does
not work in radius. In radius it ALWAYS returns a status ok and
authenticates
Hello,
We are trying to figure out how to do an auth from one client but not from
another. Let me explain: For our DSL clients we use a separate radius
server and backup server. For everything else (dialup, news) we use
other servers. Our problem comes in that we set all DSL clients
Hi,
no, I didn't have same attributes...
After some trials I have made it... What was the reason - no idea... :(
Anyway, is it possible to set default Fall-Through for Radius with mysql?
I tried adding some things in user.conf, but it didn't work.
Thx,
Best regards,
Comec
On Sat, 24 May
Hey,
one question:
I am working on FreeRadius 2.0.4 with mysql
I have following situation:
I have created 2 groups and I configured parameters for them in
radgroupreply.
Then I added one user, and added him to those 2 groups in radusergroup
table.
When I authenticate with that user, I get
Hi Alan
these are the radius-packages installed on that machine:
[EMAIL PROTECTED] ~]# pkg_info -A |grep -i radius
freeradius-1.1.6RADIUS server implementation
freeradius-ldap-1.1.6 freeradius ldap rlm addon
[EMAIL PROTECTED] ~]#
and these are the ldap-packages installed on it:
[EMAIL
Hi listers
[EMAIL PROTECTED] ~]# uname -a
OpenBSD myhost.mydomain.com 4.2 GENERIC#375 i386
[EMAIL PROTECTED] ~]#
[EMAIL PROTECTED] ~]# pkg_info -A
freeradius-1.1.6RADIUS server implementation
freeradius-ldap-1.1.6 freeradius ldap rlm addon
[EMAIL PROTECTED] ~]#
[EMAIL PROTECTED
Hello,
We are just setting up 2 new FreeRadius boxes to handle DSL radius
authentication. This is nothing new to us. What is new is using a MySql data
base with the FreeRadius.
Anyway we have most everything working as should be. We are running the
MySql databases as master and slave
Hi all.
How can I configure freeradius-1.1.0 with MySQL for authenticating and accounting.
from http://www.frontios.com/freeradius.html, it says that,
authorise {preprocesschapmschap#counter#attr_filter#eapsuffix
sql#files
hi members,
can anyone inform me that what is the source file in freeradius-1.1.0,
in where the mysql quiries for authentication and accounting is executed.
thanks and regards...
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
hi members,
can anyone inform me that what is the source file in freeradius-1.1.0,
in where the mysql quiries for authentication and accounting is executed.
thanks and regards...
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Kevin,
I did run this in debug mode before I posted on the list, and could not
quite figure it out. So here is part of the debug out below.
Thanks,
Ken
On Tue, 24 Jan 2006, Kevin Bonner wrote:
On Monday 23 January 2006 20:37, User for Free Radius mail list wrote:
The result is domain2
I'm sure someone can give me a quick answer to this problem. I have one
radius server that handles request in the form:
username
[EMAIL PROTECTED]
[EMAIL PROTECTED]
We this setup in our proxy.conf file:
realm domain1.com {
type= radius
authhost= LOCAL
I'm sure someone can give me a quick answer to this problem. I have one
radius server that handles request in the form:
username
[EMAIL PROTECTED]
[EMAIL PROTECTED]
We this setup in our proxy.conf file:
realm domain1.com {
type= radius
authhost= LOCAL
Is there any way to throttle the amount of bandwidth a specific user gets via FreeRADIUS? The setup we use is FreeRADIUS on Ubuntu, Chillispot on a DD-wrt. I figured this would be a setting in a router along the way but I wanted to check and make sure there wasn't something I was missing.-
Hello again,I got the DialupAdmin/SQL problem fixed (Thanks) but now I'm running into a problem with FreeRADIUS. I've tried following several different guides I've found on the net for setting up FreeRADIUS and MySQL and each time, I get the same results. Whenever, I enable anything regarding
on the net concerning this error but have not seen anything regarding it. I'm not very proficient in MySQL but I've been using phpmyadmin to view the radius table. If anyone has any solutions to this problem, it would be greatly appreciated. I'm looking to setup a Free WISP in my area and this would
did you just start using mysql with this?
Check in you log location for the IP address of the log information.
I created a sym link off our IPs to write to only one detail file.
- Original Message -
From: [EMAIL PROTECTED]
To: freeradius-users@lists.freeradius.org
Sent: Tuesday,
to the directory our
detail file is in.
I don't have the domain listed in proxy.conf because I was told not to do
that
because the domain is on the same system as the radius server.
Thanks
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
When I run radwho -r to get all the information of a login.
rod,Rodney Rumley,PPP,S406,Tue 17:46,63.215.26.177,4.240.144.66
I need to clean this one out of the list.
I get all this below and have tried several commands but it keeps returning
me to this
with no real reason why it didn't work.
Radius [EMAIL PROTECTED] wrote:
I get all this below and have tried several commands but it keeps
returning
me to this
with no real reason why it didn't work.
You didn't say what you typed in as the command-line for radzap.
Try reading the man pages for radzap radwho.
Alan DeKok.
-
List info
Message -
From: Alan DeKok [EMAIL PROTECTED]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Thursday, December 01, 2005 1:06 PM
Subject: Re: RadZap
Radius [EMAIL PROTECTED] wrote:
I would type
radzap -N 63.215.26.177 S406 secret
Which is wrong. Please
PM
Subject: Re: RadZap
Radius [EMAIL PROTECTED] wrote:
Don't think I'm that stupid about an IP address. That was the port.
So... where did you type in the IP address of the RADIUS server?
The answer is nowhere, which is your mistake.
I guess I'l have to google for someones example.
Uh
[EMAIL PROTECTED]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Thursday, December 01, 2005 1:06 PM
Subject: Re: RadZap
Radius [EMAIL PROTECTED] wrote:
I would type
radzap -N 63.215.26.177 S406 secret
Which is wrong. Please READ the help the man page.
It keeps
-
From: Scott O'Connell [EMAIL PROTECTED]
To: 'FreeRadius users mailing list'
freeradius-users@lists.freeradius.org
Sent: Thursday, December 01, 2005 2:56 PM
Subject: RE: RadZap
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Radius
Sent: Thursday, December
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Radius
Sent: Thursday, December 01, 2005 1:44 PM
To: FreeRadius users mailing list
Subject: Re: RadZap
Your man says this.
radzap [-d raddb_directory] [-N nas_ip_address] [-P
nas_port] [-u user] [-U
user] server[:port
...
radzap -N 63.215.26.177 -P S406 -u rod
XXX.XXX.XXX.XXX:1646 secret
XXX.XXX.XXX.XXX should be your *RADIUS* server IP. Not
NAS, not client and, FWIW, secret should be the
secret configured in your clients.conf.
And I definitely think that -P S406 should just be -P
406
Laker
--- Radius [EMAIL
rod
XXX.XXX.XXX.XXX:1646 secret
XXX.XXX.XXX.XXX should be your *RADIUS* server IP. Not
NAS, not client and, FWIW, secret should be the
secret configured in your clients.conf.
And I definitely think that -P S406 should just be -P
406
Laker
--- Radius [EMAIL PROTECTED] wrote:
S406 is an S
- Original Message -
From: Christopher Carver [EMAIL PROTECTED]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Tuesday, November 29, 2005 11:04 AM
Subject: Re: Configuring RADIUS Users
Madhuraka Godahewa wrote:
Hi All, I installed freeRADIUS 1.0.5
We have recently installed Freeradius 1.0.5 and dialupadmin on CentOS4.2.
We have changed the clean_radacct file so that it will delete the online
user entries that are greater than 4 days old instead of 30 in the
dialupadmin. However, it does not delete out those entries from the
online users
I have tried to hire someone to help with my Radius over the last 6 month's
but have not been able to get it
working correctly.
I seem to be getting answers from my MySql database but when a CHAP request
comes in, it will not authorize and ells us Auth-Type already set. The
database
seems
@lists.freeradius.org
Sent: Monday, November 21, 2005 3:37 PM
Subject: RE: CHAP Problems
There used to be a DEFAULT stanza in the users configuration file that
set Auth-Type := System which tells the RADIUS server to use /etc/passwd
for authentication. This has caused a few issues like this in the past,
though I
in the users configuration file that
set Auth-Type := System which tells the RADIUS server to use /etc/passwd
for authentication. This has caused a few issues like this in the past,
though I thought it had been resolved for 1.0.5.
If is still exists you may have more success if you comment
to hire someone to help with my Radius over the last 6
month's
but have not been able to get it
working correctly.
As much as I would like to take your money, its probably not necessary.
:-) This is usually a very simple thing to get working.
I seem to be getting answers from my MySql database
I have tried to hire someone to help with my Radius over the last 6 month's
but have not been able to get it
working correctly.
I seem to be getting answers from my MySql database but when a CHAP request
comes in, it will not authorize and ells us Auth-Type already set. The
database
seems
]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Monday, November 21, 2005 3:37 PM
Subject: RE: CHAP Problems
There used to be a DEFAULT stanza in the users configuration file that
set Auth-Type := System which tells the RADIUS server to use /etc/passwd
for authentication
stanza in the users configuration file that
set Auth-Type := System which tells the RADIUS server to use /etc/passwd
for authentication. This has caused a few issues like this in the past,
though I thought it had been resolved for 1.0.5.
If is still exists you may have more success if you comment
@lists.freeradius.org
Sent: Monday, November 21, 2005 3:37 PM
Subject: RE: CHAP Problems
There used to be a DEFAULT stanza in the users configuration file that
set Auth-Type := System which tells the RADIUS server to use /etc/passwd
for authentication. This has caused a few issues like this in the past,
though I
- Original Message
Da: Kostas Kalevras [EMAIL PROTECTED]
To: FreeRadius users mailing list
freeradius-users@lists.freeradius.org
Oggetto: Re: question on dialup_admin
Data: 04/10/05 16:36
On Mon, 3 Oct 2005, [EMAIL
Hello!
I have a question on dialup_admin:
I have configured freeradius to authorization by LDAP and authentication by
EAP and it works fine.
Now I want to log the activity of my users with dialup_admin,
it's necessary that I use sql for authentication and authorization? or I can
use EAP and
Defined them in the radgroupreply table and used the += in the op row in
that table and voila ..
Did'nt have to stick them in the users or hints files in the raddb conf dir
...
See example ...
rlm_pap: login attempt by [EMAIL PROTECTED] with password test3
rlm_pap: Using password
Where is your binary?
might be under /etc/rc.d/rc.radiusd start
Or depending where your binary is located
/opt/freeradius/sbin/radiusd
will start it
/opt/freeradius/sbin/radiusd -x or -xx
for debug.
Alan DeKok wrote:
Jamie Chitester [EMAIL PROTECTED] wrote:
If I run
Dusty Doris wrote:
The only part the does not work is the chap authentication all other
authentication works as it should. Our wholesale provider says we are
doing PAP just fine but no chap. They had very old instructions for
Freeradius but decided to start out with a totally clean install.
Dusty Doris wrote:
The only part the does not work is the chap authentication all other
authentication works as it should. Our wholesale provider says we are
doing PAP just fine but no chap. They had very old instructions for
Freeradius but decided to start out with a totally clean install.
and radgroupreply tables and when I auth
against the radius service , I fail to get the correct attributes back upon
authentication BUT the usernames do auth ..
Anyone have any ideas ..
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
OK, so there is nothing you can see why it's not working?
The PAP authenticates work fine. it's CHAP that is failing.
Any other ideas?
Thanks
Bob
Dusty Doris wrote:
DEFAULTSuffix == .ppp, Strip-User-Name = Yes
Hint = PPP,
Service-Type = Framed-User,
Framed-Protocol = PPP
DEFAULT
in 0.9.3
Thanks
Bob
Dusty Doris wrote:
On Thu, 7 Jul 2005, Radius wrote:
OK, so there is nothing you can see why it's not working?
The PAP authenticates work fine. it's CHAP that is failing.
Any other ideas?
Thanks
Bob
Well, the debug output you sent didn't contain a CHAP passwd
Another error is the directory tree.
/home/ceruno/DESARROLLO/RadiusCuentas/radius.install/var//log/radius/radacct
Note the double // after var.
Take out the forward slash you have after the install location in your
config.
Alan DeKok wrote:
Miguel Cabrera [EMAIL PROTECTED] wrote:
Do
We are requesting bids to fix/install radius to work with version 1.0.4.
Since we are not having any luck to get this running and response has
been light and too few, and version 1.0.1 on another server just
recently decided it didn't want to work correctly with slip
when we set up a pass
install of the radius and
put everything in it's /opt directory
The only part the does not work is the chap authentication all other
authentication works as it should. Our wholesale provider says we are
doing PAP just fine but no chap. They had very old instructions for
Freeradius but decided
Thanks Dusty, I'll get all this for you.
It all works fine on an older release is what is really making it
very hard.
Yes, we want it to do both. Chap PAP
Dusty Doris wrote:
The only part the does not work is the chap authentication all other
authentication works as it should. Our
Dusty Doris wrote:
The only part the does not work is the chap authentication all other
authentication works as it should. Our wholesale provider says we are
doing PAP just fine but no chap. They had very old instructions for
Freeradius but decided to start out with a totally clean install.
I'm thinking that part of this below might be that I can only test locally
with radtest. Is there a way to tell radtest to simulate a chap password?
But when our provider was running a couple authentication tests for me
before I put the backup drive in place it would not authenticate chap.
The
Here is part of the message i got, when i MAKE.
Making dynamic in rlm_eap_peap...
gmake[10]: Entering directory
`/root/freeradius/src/modules/rlm_eap/types/rlm_eap_peap'
gmake[10]: Leaving directory
`/root/freeradius/src/modules/rlm_eap/types/rlm_eap_peap'
Making dynamic in rlm_eap_sim...
an entry of someone
not on-line.
/opt/freeradius/bin/radzap -N 63.215.26.209 S19525 [EMAIL PROTECTED]
It still seems to be reading the old files.
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
I re-ran the install as you said below.
I think it's working, I just have to get used
(sql): Reserving sql socket id: 4
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
I re-ran the install as you said below.
I think it's working, I just have to get used to adding /opt/freeradius
in the command lines.
Been watching with the radiusd -x and can even run a radtest
Before I touch anything of these errors, I'm asking here. This shows up
in the logs when
radius is started.
Mon Jul 4 12:15:33 2005 : Error: rlm_attr_filter: Authorize method will be
deprecated.
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
A recent post explained how to fix
I have just found out no chap logins are working since the update to 1.0.4
Here is what they are showing in the radius -x
This is only happening with those that are logging in through our
wholesale service.
Anyone logs in locally with the realm does fine.
Some log errors
Warning: Found 2
I did not see this one hit the list.
No chap logins are working since the 1.0.4 installation
Here is what is showing when I run radius -x
This is only happening with those that are logging in through our
wholesale service.
Anyone logs in locally with the realm does fine.
Some log errors
I should note that it's with mysql. Not in the users file.
I'm still looking but I recall something about Freeradius needing to
know to look in mysql
for chap authentication?
Radius wrote:
I did not see this one hit the list.
No chap logins are working since the 1.0.4 installation
Here
Radius wrote:
I should note that it's with mysql. Not in the users file.
I'm still looking but I recall something about Freeradius needing to
know to look in mysql
for chap authentication?
Radius wrote:
I did not see this one hit the list.
No chap logins are working since the 1.0.4
OK,, I'm confused
$ cp ./raddb/dictionary /etc/raddb/dictionary
I have a directory /etc/raddb/dictonary
Do I also need to create ./raddb/dictonary ?
Thanks
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
After updated to 1.04 and making the changes again what you recommend below
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
After updated to 1.04 and making the changes again what you recommend below
and when I try to run radtest I get all kinds of these dup error.
radclient: dict_init:
/usr/local/radius/share/freeradius/dictionary.acc[110]: dict_addvalue
Well, actually it was ver 1.01
But after loading the backup, I now get the same errors.
Well, I guess I just hosed a production server now.
It was all working fine before I tried to make the update.
That will teach me to fix something not broke.
Radius wrote:
Alan DeKok wrote:
Radius
in the system.
I just replaced all the /usr/local /etc directories from the back up
and that crazy
error is still there.
It's saying radtest can't read the radiusd.conf file.
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
After updated to 1.04 and making the changes again what you
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
I have a directory /etc/raddb/dictonary
FreeRADIUS never created that.
It should be a file.
It was a file. I should have been more clear.
See raddb/dictionary in the 1.0.4 source distribution.
it says
Sorry, I take that back
I used ./configure --localstatedir=/var --sysconfdir=/etc
because when I went to 0.93 last year I was using Cistron.
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
I have a directory /etc/raddb/dictonary
FreeRADIUS never created that.
It should
double billing by our provider.
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
I have a directory /etc/raddb/dictonary
FreeRADIUS never created that.
It should be a file.
See raddb/dictionary in the 1.0.4 source distribution.
it says in there that they are at /usr
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
I re-ran the install as you said below.
I think it's working, I just have to get used to adding /opt/freeradius
in the command lines.
Been watching with the radiusd -x and can even run a radtest
Exactly. The problem
=209
Acct-Session-Id = 04c5
User-Name = kj20
NAS-IP-Address = 64.240.76.5
NAS-Port = 17
Acct-Status-Type = Start
Acct-Authentic = RADIUS
USR-Connect-Speed = 4-BPS
USR-Modulation-Type = v90Analog
USR-Simplified-MNP-Levels
These warnings also after what I posted below.
rlm_acct_unique: WARNING: Attribute NAS-Port-Id was not found in
request, unique ID MAY be inconsistent
Radius wrote:
Now it's something different. But it's not telling me where it's at. I
checked the users file and they are all ==
The attrs
I currently run ver.0.9.3
I have MySql database that is used with FreeRadius.
What were are having a problem with is that if the
user logs in with UPPER-NAME or lower-name
either one works.
I have tried lower_user lower_pass before/after/no
and the radius system still authenticates all UPPER
and solved it by changing it in the config.
Nick Marino - IT Solutions
- Original Message - From: Radius [EMAIL PROTECTED]
To: freeradius-users@lists.freeradius.org
Sent: Saturday, July 02, 2005 12:10 PM
Subject: [radius] Freeradius/MySql problem
I currently run ver.0.9.3
I have MySql database
OK, let me try this way, when our wholesale provider receives a realm,
they know where
to send the request.
If the user sends [EMAIL PROTECTED] or [EMAIL PROTECTED]
our radius regardless if I have lower_user before/after/no
They will be authenticated either way.
If we force it lower on our
table settings, and how they
say to change this, but it also says you do one thing wrong
you will corrupt the database. Don't want that.
Nick Marino wrote:
Let me look at my files and find the exact entry.
Nick Marino - IT Solutions
- Original Message - From: Radius [EMAIL PROTECTED
is 'no' (don't lowercase values)
# Valid values = before / after / no
#
lower_user = before
lower_pass = before
Nick Marino - IT Solutions
- Original Message - From: Radius [EMAIL PROTECTED]
To: FreeRadius users mailing list
freeradius-users@lists.freeradius.org
Sent: Saturday, July 02
# db side is *also* lowercase to make this work
#
# Default is 'no' (don't lowercase values)
# Valid values = before / after / no
#
lower_user = before
lower_pass = before
Nick Marino - IT Solutions
- Original Message - From: Radius [EMAIL PROTECTED]
To: FreeRadius users mailing list
They are all lower case.
In all the databases they are lower case.
But when someone logs in on our wholesale service and they put UPPER
case regardless how
I have radius set they still authenticate either way.
Since the provider requires chap, we use mysql. On our local number is
PAP, so
After updated to 1.04 and making the changes again what you recommend below
and when I try to run radtest I get all kinds of these dup error.
radclient: dict_init:
/usr/local/radius/share/freeradius/dictionary.acc[110]: dict_addvalue:
Duplicate value name Administrative-reset for attribute Acc
I've changed the following ...
sql_server: 127.0.0.1 ( don't work )
sql_server: 1.2.3.4 ( where it is a substitute for the real ip address )
If I look at the fields below
sql_type: mysql ( is the default ) and if I use that then get this error
when clicking on statistics on the dialup
The problem is its not the sql server that's denying access but the config
of the php and dialup_admin scripts that's not working.
I can connect to the mysql database from anyother other method except via
the web interface.
-
List info/subscribe/unsubscribe? See
I am using Freeradius version 1.04 that comes with its own version of
dialup_admin.
I've successfully got Freeradius to authenticate using MYSQL as a backend.
My problem is in getting dialup_admin to read the database when I access my
radius server on the web.
My admin.conf for dialup_admin
Doug Hardie wrote:
Presuming you don't want to bring it down to run in debug mode which
would answer that question, run ktrace/strace/truss or whichever
equivallent you have have on the running radiusd for a few minutes.
Then look through the output for the open of the logfile. It
Doug Hardie wrote:
On May 29, 2005, at 21:50, Radius wrote:
Presuming you don't want to bring it down to run in debug mode which
would answer that question, run ktrace/strace/truss or whichever
equivallent you have have on the running radiusd for a few minutes.
Then look through
Doug Hardie wrote:
Presuming you don't want to bring it down to run in debug mode which
would answer that question, run ktrace/strace/truss or whichever
equivallent you have have on the running radiusd for a few minutes.
Then look through the output for the open of the logfile. It
I'm sure I missed a setting or something. We changed providers as well
as our IP address's 4 days ago. Ever Since we did, no detail logs are being
created by FreeRadius 9.3 Everyone can get logged in and realms are working
fine, just no detail log. Any Ideas?
Thanks
Bob Ross
-
List
Does anyone have any links or on-line examples that show how to
use FreeRadius to do 802.1x authentication?
Thanks
Bob Ross
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-Address attribute is ALWAYS
# the address of the client which sent us the
# request.
#
# The following line creates a new detail file for
# every radius client (by IP address or hostname).
# In addition
Seferovic Edvin wrote:
Hi,
this is module configuration. Do you also have detail keyword in your
accounting { ... } part in the radiusd.conf?
Regards,
Edvin Seferovic
PS: I recommend you to update free radius to 1.0.2 !
I sent the detail part of the radius.conf, did you want me to send
Everything was working fine until we switched back haul providers.
We changed all the ip address's that we could fine under the raddb/etc
directory.
I'm sure I missed a setting or something. We changed providers as well
as our IP address's 4 days ago. Ever Since we did, no detail logs are being
We are trying to set up a pass through radius to send requests for
another domain to a
different server.
The main server kingmanaz.net and the second server freedomnetusa.com
We want all requests for freedomnetusa.com to be forwarded from the
kingmanaz.net machine when the request
Sure can, Thanks
In clients
65.172.18.3secrete
In hints
otherSuffix = @freedomnetusa.com, Strip-User-Name = No
Hint = PPP,
Service-Type = Framed-User,
Framed-Protocol = PPP
In proxy.conf
realm freedomnetusa.com {
type= radius
authhost= 65.172.18.3:1645
Wow!!!,
A lot of the stuff found on-line about this, must have been outdated.
Thank you so much. I have been trying to get this working for the last
three weeks. Your the 1st to respond since I posted it Tuesday.
Thank you again. This really helps.
Thanks
Bob Ross
Alan DeKok wrote:
Radius [EMAIL
In the freedom radius.log, will it will be normal to have double entries
for every login?
Is there a way to have only one?
Thanks
Bob Ross
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
In hints
otherSuffix = @freedomnetusa.com, Strip-User-Name = No
Delete this entire entry from
2005 : Auth: Login OK: [signup/newone] (from client
kingserv port 55)
Alan DeKok wrote:
Radius [EMAIL PROTECTED] wrote:
A lot of the stuff found on-line about this, must have been outdated.
The documentation that comes with the server is the best source to
use. Outside documentaion
to a remote radius server. Note that
any stripping done in the hints file doesn't have an effect on the
username sent to the remote radius server unless you set the
hints option.
- The remote server replies with ACK or REJECT
Radius wrote:
Sat Mar 12 10:59:25 2005 : Auth: Login OK: [signup/newone
1 - 100 of 139 matches
Mail list logo
