FYI: Cisco TAC quickly found my config problem. I took out:
aaa authorization network default if-authenticated
and replaced it with:
aaa authorization network default group radius local
and that did it. Thanks for all of your suggestions! Next up is to start
defining pools and
Hi:
I've used Livingston and Cistron radiusd's in the past with dialup ppp
users and Cisco/Lucent NASes and have been able to do this with no
problems.
Users are currently authenticating fine and getting assigned IPs from the
IP pool as defined in the Cisco NAS. However, I'd like to have
I've used Livingston and Cistron radiusd's in the past with dialup ppp
users and Cisco/Lucent NASes and have been able to do this with no
problems.
Users are currently authenticating fine and getting assigned IPs from the
IP pool as defined in the Cisco NAS. However, I'd like to have a few,
On Tue, 26 May 2009, Ivan Kalik wrote:
I've used Livingston and Cistron radiusd's in the past with dialup ppp
users and Cisco/Lucent NASes and have been able to do this with no
problems.
Users are currently authenticating fine and getting assigned IPs from the
IP pool as defined in the Cisco
Message: 1
Date: Tue, 26 May 2009 18:56:42 +0100 (BST)
From: Ivan Kalik t...@kalik.net
Subject: Re: Assigning IP address from RADIUS to Cisco PPTP users
To: FreeRadius users mailing list
freeradius-users@lists.freeradius.org
Message-ID: 52973.87.194.16.13.1243360602.squir...@webmail.kalik.net
Make Sure Overide is Disabled in the ippool module..
e.g. # override:
# If set, the Framed-IP-Address already in the
# reply (if any) will be discarded, and replaced
# with a Framed-IP-Address assigned here.
override = no
That would be so
On Tue, 26 May 2009, Ivan Kalik wrote:
Make Sure Overide is Disabled in the ippool module..
e.g. # override:
# If set, the Framed-IP-Address already in the
# reply (if any) will be discarded, and replaced
# with a Framed-IP-Address assigned here.
Hi!
On Tue, May 26, 2009 at 11:34:41AM -0400, u...@3.am wrote:
Users are currently authenticating fine and getting assigned IPs from the
IP pool as defined in the Cisco NAS. However, I'd like to have a few,
select users assigned static IPs from outside that pool, but the Cisco
(2811)
On Wed, 27 May 2009, Vadim Ostranitsyn wrote:
Hi!
On Tue, May 26, 2009 at 11:34:41AM -0400, u...@3.am wrote:
Users are currently authenticating fine and getting assigned IPs from the
IP pool as defined in the Cisco NAS. However, I'd like to have a few,
select users assigned static IPs from
9 matches
Mail list logo
