Hi,
See in attach naslist, clients.conf and radius -xx log.
you dont have 127.0.0.1 in your clients.conf
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
gosha-necr wrote:
Hi all! I'm setup Samba PDC (3.0.25a) + LDAP and i want that users connect to
the internet throught VPN using their LDAP credentials. I think it will be
MPD + FreeRADIUS. But when i'm try to configure radius work with ldap it get
me error.
I use this HOW-TO:
Thank you for your reply, Mr.DeKok.
Use 1.1.6. It has a NUMBER of bugs fixed over 1.1.0.
ok, I will consider it.
but 1.1.6 crash when it recieve SIGHUP ...
Hmmm...
I think that stopping responding in our site
is similar following reports.
2007-February/060174.html
Hi,
I found a few articles online about dynamically assigning VLAN IDs to
users using RADIUS, this article was the most useful:
http://searchsecurity.techtarget.com/general/0,295582,sid14_gci1169011,00.html
I tried setting up something like this from that page using my mysql
tables in
Hi,
Tunnel-Type=VLAN (13)
Tunnel-Medium-Type=802
Tunnel-Private-Group-ID=VLANID
Tunnel-Medium-Type = IEEE-802
Tunnel-Type = VLAN
Tunnel-Private-Group-Id = XXX
where XXX is your VLAN number ID. NB IEEE-802. thats the proper
specification for that attribute in almost all cases. certainly
in
Hi,
Thank you for your reply, Mr.DeKok.
Use 1.1.6. It has a NUMBER of bugs fixed over 1.1.0.
ok, I will consider it.
but 1.1.6 crash when it recieve SIGHUP ...
Hmmm...
all FR of 1.1.6 and below have issues with SIGHUP - just not
as directly visible. do a stop/start instead. almost
Hi,
attempting to kill a running radsql with ^C doesn't do anything, and kill'ing
it with TERM doesn't impress it either on my system. I had to send KILL to
get rid of it. Is this intentional?
Then, on startup I see it instantiated but only the post-auth query is printed
on startup with -X -
Thanks for answer, but this solution is first what i'm check.
I'm set
chmod -R 444 ./raddb
chmod 555 ./raddb
and nothing changes.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[EMAIL PROTECTED] wrote:
Hi,
Tunnel-Type=VLAN (13)
Tunnel-Medium-Type=802
Tunnel-Private-Group-ID=VLANID
Tunnel-Medium-Type = IEEE-802
Tunnel-Type = VLAN
Tunnel-Private-Group-Id = XXX
where XXX is your VLAN number ID. NB IEEE-802. thats the proper
specification for that
hi,
wats the difference between multilink attempt and double login.
thank you...
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Multilink - combining two or more connectins into a single, faster
connection
Multiple login - for instance, guest account, which several users can use
at the same time, but all these connections are independant
Ivan Kalik
Kalik Informatika ISP
Dana 22/6/2007, Mahalakshmi Vijayakumar [EMAIL
Hi all,
we're using FreeRadius 1.1.6 to give access to our WLAN with EAP-TTLS.
Worked great so far.
No we want to participate in inter University roaming (eduroam) and thus
have to proxy some requests a parent server. Everything works great
except regarding the outer identity.
If it's just
Hi
I have a little problem with authenticate using EAP/TLS on freeradius.
After Access Challenge freeradius not display Reject or Accept, only
going to the begin and repeat the same operation. What`s wrong ?? as NAS
i`m using CISCO catalyst 2950 and client supplicant WinXP.
this is logs from
http://wiki.freeradius.org/index.php/FAQ#PEAP_or_EAP-TLS_Doesn.27t_Work_with_a_Windows_machine
Ivan Kalik
Kalik Informatika ISP
Dana 22/6/2007, stefek143 [EMAIL PROTECTED] piše:
Hi
I have a little problem with authenticate using EAP/TLS on freeradius.
After Access Challenge freeradius not
Hello Andreas,
No we want to participate in inter University roaming (eduroam) and thus
have to proxy some requests a parent server. Everything works great
except regarding the outer identity.
If it's just anonymous everything is ok, but if it's
anonymous@somerealm and somerealm is
hi,
can u give me an instance where multilink is used
thank you
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
RADIUS was *originally* intented to assign IP's. It's been doing that
since at least 1993.
Do you mean radius servers has being doing DHCP since 1993 or IP pool stuff.
What is is the difference?
No i meant exactly what i wrote. RADIUS can assign IP's (that's why we
have the
ISDN
Dana 22/6/2007, Mahalakshmi Vijayakumar [EMAIL PROTECTED] piše:
hi,
can u give me an instance where multilink is used
thank you
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On 6/22/07, Stefan Winter [EMAIL PROTECTED] wrote:
attempting to kill a running radsql with ^C doesn't do anything, and kill'ing
it with TERM doesn't impress it either on my system. I had to send KILL to
get rid of it. Is this intentional?
I remember hitting similar problem, when experimenting
On Fri 22 Jun 2007, Eshun Benjamin wrote:
RADIUS was *originally* intented to assign IP's. It's been doing that
since at least 1993.
Do you mean radius servers has being doing DHCP since 1993 or IP pool
stuff. What is is the difference?
RADIUS has been assigning IPs to users since it's
Stefan Winter wrote:
attempting to kill a running radsql with ^C doesn't do anything, and
kill'ing it with TERM doesn't impress it either on my system. I had to
send KILL to get rid of it. Is this intentional?
The radsqlrelay script doesn't exit immediately. It finishes the
pending queries in
Thanks Arran,
Is packet-src-ip-address is a defined attribute in the huntgroups?
Do you know where I can find more documentation about configurating
huntgroups?
Any thoughts about how freeRADIUS can stop the naughty hosts?
Thanks in advance for your answers.
Vinh
Arran Cudbard-Bell wrote:
I just installed freeradius
Am using with Globalpops
I am getting some duplicate accounting start on logins
Not all the time but on occasions.
I have had GP check their end they are only seeing the one coming from the nas
but say this issue maybe on my end not responding fast
Hello all,
I wasn't able to find an answer to this on the archives. Now, here is
the set up: Freeradius Ver. 1.1.6 on centOS V.5. I am testing a Cisco
2000 Series Wireless LAN Controller and am trying to figure out a way to
put unknown users (via their MAC Address) into a limited access vlan.
25 matches
Mail list logo