External Email - Use Caution
I tried on our Linux: Centos Linux 7 (core), ID_like = ‘rhel fedora’ with the
same “segmentation fault (core dumped)” error.
Thanks,
Xiaomin
From: Xiaomin Yue<mailto:yu...@hotmail.com>
Sent: Friday, July 17, 2020 6:07 PM
To: Freesurfer suppor
External Email - Use Caution
Yes. I will try it on a real Linux box and let you know.
Thanks,
Xiaomin
From: Douglas N. Greve<mailto:dgr...@mgh.harvard.edu>
Sent: Friday, July 17, 2020 5:32 PM
To: Xiaomin Yue<mailto:yu...@hotmail.com>; Freesurfer support
list<ma
It will ask you for a user name: use "anonymous" (no quotes)
It will ask you for a password: use "anonymous" (no quotes)
cd transfer/incoming
binary
put subject.tar.gz
Send an email that the file has been and the name of the file.
On 7/15/2020 11:07 AM, Xiaomin Yue wrote:
External Email - Use Caution
Hi All,
Just in case the below poster was missed.
Thanks,
Xiaomin
From: Xiaomin Yue<mailto:yu...@hotmail.com>
Sent: Saturday, July 11, 2020 1:43 PM
To: Freesurfer support list<mailto:freesurfer@nmr.mgh.harvard.edu>
Subject:
External Email - Use Caution
Hi Doug,
I used FS 7.1 under WSL to analyze retinotopy data. Since the ring and wedge
were presented at a different frequency, the data had to be analyzed separately
for each condition. To get the field sign, I had to use the mri_fieldsign
le libraries or graphics card driver.
Ruopeng
On Jul 9, 2020, at 10:38 PM, Xiaomin Yue
mailto:yu...@hotmail.com>> wrote:
External Email - Use Caution
Thanks for your response. Why does freeview 2 work?
Thanks,
Xiaomin
From: fsbuild<mailto:fsbu...@contbay.com>
Sent: Thursda
tem that installed Motif
and/or also maybe changed the X windows distribution libraries (as used by
freeview).
- R.
On Jul 9, 2020, at 12:54, Xiaomin Yue wrote:
External Email - Use Caution
Hi,
Here is the command I used in the freeview 3.0: freeview – f
$SUBJECTS_DIR/LO
External Email - Use Caution
Dear all,
The Freeview (3.0) coming with fs 7.1 can not show any surface brain (inflated,
pial, white) in a solid color. The Freeview is currently running under WSL and
was running without a problem until I updated libXm4. Is there a particular
Hi All,
During the experiment, a wedge was presented clockwise, starting from the low
vertical meridian, and a ring was presented from center to peripheral. The
analysis done successfully with fs5.3 generated values of polar angle and
eccentricity for each voxel. For example, the voxel A has
Hi,
I am running a retinotopy analysis using fsfast 5.3. The design has 15 TR
blank before and after wedge presented for 30 TR with 7 repeats, and ring
presented for 24 TR with 7 repeats. Here is my analysis: mkanalysis -s vz -a
rtoy.self.rh -fsd bold -fwhm 2 -nskip 15 -TR 1.5 -retinotopy 48
matter. 70 is way
too low
On Tue, 19 Apr 2016, Xiaomin Yue wrote:
> The white matter in the anterior temporal lobe is around 70, the gray matter
> is about 30. The number is read from brain.finalsurfs.mgz.
> Xiaomin
>
> > Date: Tue, 19 Apr 2016 09:29:50 -0400
> > From: fi
______
> > Von: freesurfer-boun...@nmr.mgh.harvard.edu
> > [freesurfer-boun...@nmr.mgh.harvard.edu]" im Auftrag von "Xiaomin Yue
> > [yu...@hotmail.com]
> > Gesendet: Dienstag, 19. April 2016 01:13
> > An
tough to make out much from the snapshots, if you upload the entire
subject dir to our ftp site I'll take a lookCheersBruce
On Apr 18, 2016, at 7:13 PM, Xiaomin Yue <yu...@hotmail.com> wrote:
Hi Jon,
Thanks for your answers. There is gray-white contrast in the temporal lobe,
but same as yo
, Xiaomin Yue wrote:
> Hi Bruce,
> I have done the recon-all (fs5.3) with the data collected from a 7T scanner
> using MP2Rage. The recon went well without problem. But the the temporal
> reconstruction looks clearly not correct (see attached). I tried to push
> the pial
hout seeing more detail in your images. Do you
have contrast in the temporal lobe? Frequently it goes away at 7T due to
dielectric effects. I'll cc Jon Polimeni who is our 7T (among other
things!) expert.
cheers
Bruce
On Fri, 15 Apr 2016, Xiaomin Yue wrote:
> Hi Bruce,
> I have don
your voxel size?
It will include any voxel even if only a corner of it has some surface
in it.
On 01/15/2016 12:16 PM, Xiaomin Yue wrote:
> here it is. thanks,
>
>
>
> > To: freesurfer@nmr.mgh.harvard.edu
> > From: gr...@nmr.mgh.harvard.edu
> > Date: Fri, 15 Jan 2016 12:00:02 -0
els with a 1.5mm voxel size.
Not sure what you are asking about in terms of gray matter.
On 01/15/2016 12:27 PM, Xiaomin Yue wrote:
> The voxel size is 1.5mm. Some of voxels in the gray matter are not
> included in the mask as well. Why?
>
> Xiaomin
>
>
>
>
> On Fri, Jan
Thanks.
Xiaomin
On Fri, Jan 15, 2016 at 11:41 AM -0800, "Douglas N Greve"
<gr...@nmr.mgh.harvard.edu> wrote:
or you can add --fillribbon to your surf2vol command (but the label2vol
method is probably better)
On 01/15/2016 12:32 PM, Xiaomin Yue wrote:
> May
en
going to File -> Patch -> LoadPatch and choosing the correct patch.flat file.
These instructions are detailed here:
https://surfer.nmr.mgh.harvard.edu/fswiki/recon-all#Flattening
Best,
Lee
On Thu, 1 Oct 2015, Xiaomin Yue wrote:
> Hi,
> Can the developmental freeview display ?h.cort
Hi,
Can the developmental freeview display ?h.cortex.patch.flat? I can't find
answers in the mail list. If not, is there any way to convert the patch.flat
to a format freeview can display?
Thanks,Xiaomin___
Thanks
Xiaomin
On Tue, Sep 8, 2015 at 2:03 PM -0700, "Douglas N Greve"
<gr...@nmr.mgh.harvard.edu> wrote:
Use "abs" not ""
On 09/04/2015 03:20 PM, Xiaomin Yue wrote:
> Hi,
>
> I got this error when run mri_glmfit-sim: missing name for redirect.
Hi,
I got this error when run mri_glmfit-sim: missing name for redirect. I am
running freesurfer 5.3. the command is: mri_glmfit --glmdir ces.nii --cache 2
--sim-sign . The ces.nii was generated from group level analysis
(isxconcat-sess).
Thanks for your help.
Xiaomin
.
Welcome to fMRI:). I think the reason why the residual does not
equal y - X*beta is that they are whitened. Try it with whitening
turned off and see if you get the same (identical) result.
doug
On 8/9/15 10:50 PM, Xiaomin Yue wrote:
Hi Doug
Hi Doug,
In order to understand my data better, I did the following analysis. First, I
did a full model analysis with all stimuli conditions included in the analysis
using: mkanalysis-sess -fsd bold -paradigm xy_mky_category_eye_weights.par
-event-related -refeventdur 1 -no-inorm -delay 0
The psd window is only really relevant for FIR analyses. You are
assuming a shape to the HRF (a gamma function), and so FSFAST hard
codes the psdwin. If you really want to force it to change, put
-timewindow after -gammafit
On 8/6/15 4:38 PM, Xiaomin Yue
be helpful to have your mkanalysis-sess command
On 08/05/2015 04:17 PM, Xiaomin Yue wrote:
Hi,
I set timewindow to 10 in the mkanalysis-sess. When I loaded Xtmp.mat
in to maltlab, then plot(flac.ev(2).Xirf), the size of the
flac.ev(2).Xirf is 20 points, which is corrected because
/05/2015 04:17 PM, Xiaomin Yue wrote:
Hi,
I set timewindow to 10 in the mkanalysis-sess. When I loaded Xtmp.mat
in to maltlab, then plot(flac.ev(2).Xirf), the size of the
flac.ev(2).Xirf is 20 points, which is corrected because of psdwin is
[0 40 2]. Should the psdwin be [0 10 2
: gr...@nmr.mgh.harvard.edu
To: freesurfer@nmr.mgh.harvard.edu
Subject: Re: [Freesurfer] mkanalysis-sess, timewindow
it would be helpful to have your mkanalysis-sess command
On 08/05/2015 04:17 PM, Xiaomin Yue wrote:
Hi,
I set timewindow to 10 in the mkanalysis-sess. When I loaded
Dear all,
I loaded the t.nii under a contrast directory in freeview, and then loaded the
t.nii to matlab using MRIread. When I checked the t value for a point, such as
32, 38, 32, the value is 3.96. Then I got value from the same point (32, 38,
32) in matlab, I got a different t value. I
] fast_selxavg3.m
To: freesurfer@nmr.mgh.harvard.edu
not sure what to tell you. Is there a critical number that
causes it to
fail? Eg, 400? Or a particular contrast name? I assume that none of the
contrast names have a space in them.
On 07/09/2015 10:06 AM, Xiaomin Yue
Hi,
I am using v5.3 fsfast to analyze a function data. The sexlavg3-sess had this
error: ConList=splitstring('XXX') Error: A matlab string constant is not
terminated properly (where 'XXX represents contrasts generated using
mkcontrast-sess).; | Error: unexpected matlab expression; Error: the
Do you mean by contrasting a condition vs fixation?
Xiaomin
On Mon, May 18, 2015 at 7:07 AM -0700, Douglas Greve
gr...@nmr.mgh.harvard.edu wrote:
Yes, but you have to set up the contrasts, it won't do it automatically
On 5/16/15 10:48 PM, Xiaomin Yue wrote:
Hi,
During the processing
Thanks
Xiaomin
On Mon, May 18, 2015 at 9:15 AM -0700, Douglas Greve
gr...@nmr.mgh.harvard.edu wrote:
yes
On 5/18/15 10:38 AM, Xiaomin Yue wrote:
Do you mean by contrasting a condition vs fixation?
Xiaomin
On Mon, May 18, 2015 at 7:07 AM -0700, Douglas Greve
gr
Hi,
During the processing of functional data, can fsfast generate outputs of the
significants for each beta values modeled in the design matrix?
Thanks,XIaomin___
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu
with -nuisreg filename 1
doug
On 5/3/15 11:17 AM, Xiaomin Yue wrote:
Hi Doug,
Thanks for your response. I want to treat it as a nuisance variable.
If so, should the #3 is best choice?
Xiaomin
Date: Sun, 3 May 2015 11:06:01
part, you can resample with 3 mm (instead of 2 or 1mm).
On Sun, May 3, 2015 at 7:57 PM, Xiaomin Yue yu...@hotmail.com wrote:
Hi,
I hope that I can get some answers for the question that has been asked
previously. I am analyzing a large dataset, which has 28917 time points.
Although our server
, then
create a text file with a value for each time point and put it in the run
folder then run mkanalysis-sess
with -nuisreg filename 1
doug
On 5/3/15 11:17 AM, Xiaomin Yue wrote:
Hi Doug,
Thanks for your response. I want to treat it as a nuisance variable. If so,
should the #3 is best
variable or task? In any
event, I would probably recode it to make fixation=0 and
non-fixation something else
On 5/2/15 5:34 PM, Xiaomin Yue wrote:
Hi,
I have a question related to how
Hi,
I have a question related to how to make an appropriate design
matrix using fs-fast 5.3. Subjects’ eye
movement was collected during an experiment. Then, the data has been
transformed to a continuous
variable with a number for each TR. The
better fixation performance
as the original
functional?
On 4/14/15 10:30 PM, Xiaomin Yue wrote:
yes, that's precisely what I want. the reason is
the following. A subject was scanned multiple times across days
with slightly different slice position for each time. What I
need
Hi Doug,
I like to convert a native functional data into the anatomical space using
mri_vol2vol with --fstal, so that the resample data has same spatial resolution
as the original function data. However, mri_vol2vol give a error: --fstal
unknown. I also tried using --fstalres as suggested in
On 4/14/15 11:36 AM, Xiaomin Yue wrote:
Hi Doug,
I like to convert a native functional data into the
anatomical space using mri_vol2vol with --fstal, so that the
resample data has same spatial resolution as the original
that?
On 4/14/15 8:20 PM, Xiaomin Yue wrote:
Thanks for your response. The command you gave
will generate a new function data with the spatial resolution of
the anatomical data, which in my case is much higher than those
of functional data
Thanks very much.
Xiaomin
On Apr 13, 2015, at 9:43 AM, Douglas Greve gr...@nmr.mgh.harvard.edu wrote:
Use the (undocumented) -trgsubject flag
On 4/6/15 9:10 AM, Xiaomin Yue wrote:
Hi All,
I generated a group averaged surface using make_average_surface
successfully. Currently, I
Hi All,
I generated a group averaged surface using make_average_surface successfully.
Currently, I like to process the fMRI data using this group surface, instead of
fsaverage, using the fs-fast pipeline. For doing so, I need to run
rawfunc2surf-sess with a parameter where I can input this
Thanks
Xiaomin
On Mon, Mar 2, 2015 at 11:51 AM -0800, Douglas N Greve
gr...@nmr.mgh.harvard.edu wrote:
try this
ftp://surfer.nmr.mgh.harvard.edu/transfer/outgoing/flat/greve/lta_convert
On 02/26/2015 12:48 PM, Xiaomin Yue wrote:
Hi,
Is it possible to download lta_convert?
Thanks
Thanks. The new freeview can create correct register file
Xiaomin
On Mon, Mar 2, 2015 at 11:06 AM -0800, Douglas N Greve
gr...@nmr.mgh.harvard.edu wrote:
On 02/18/2015 09:54 PM, Xiaomin Yue wrote:
Hi Doug,
Thanks for your response. I did run bbregister to register the EPI to
T1
it to check the regsitration, but us tkregister
if you need to edit it.
doug
On 2/27/15 10:18 AM, Xiaomin Yue wrote:
Hi All,
After using freeview to manually adjust the registration
between a functional and T1.mgz
Hi All,
After using freeview to manually adjust the registration between a functional
and T1.mgz generated by bbregister, I saved the registration file in freeview
as lta format, which seems the only option. However, the registration file has
same file name for source and target volume. So,
Hi,
Is it possible to download lta_convert?
Thanks,
Xiaomin
On Thu, Feb 26, 2015 at 9:35 AM -0800, David Grayson dgray...@ucdavis.edu
wrote:
ok, great.
so let's say I have a linear transformation or a full warp field to go
between the freesurfer processed image and the unprocessed brain. is
Hi,
I like to transfer a epi file to a T1 space. Is it possible?
Thanks,
Xiaomin
On Tue, Feb 17, 2015 at 1:13 PM -0800, Douglas Greve
gr...@nmr.mgh.harvard.edu wrote:
We don't have anything to do this directly. However, we do have this tool:
http://surfer.nmr.mgh.harvard.edu/fswiki/Xhemi
. It will also resample to the T1 space,
but you can also use mri_vol2vol to do so too.
doug
On 2/18/15 5:43 PM, Xiaomin Yue wrote:
Hi,
I like to transfer a epi file to a T1 space. Is it possible?
Thanks,
Xiaomin
On Tue, Feb 17, 2015 at 1:13 PM -0800, Douglas Greve
gr
Hi All,
The recon-all stopped at the step of mri_normalize. The command is:
mri_normailze -mprage -noconform -aseg aseg.mgz -mask brainmask.mgz norm.mgz
brain.mgz. The error massege: assuming input volume is MGH (Van der Kouwe)
MP-RAGE. not interpolating and embedding volume to be 256^3…
the interior of the ?h.white surface,
then use the aseg to remove non-wm voxels I guess
On Tue, 9 Dec 2014,
Xiaomin Yue wrote:
Thanks very much. Does this create curvature file? Again, is it possible to
generate wm.mgz from those files?
Thanks,
Xiaomin
On Dec 9, 2014, at 4
Yes, lh.pial exists
Xiaomin
On Dec 10, 2014, at 10:33 AM, Bruce Fischl fis...@nmr.mgh.harvard.edu wrote:
it only looks for that if it can't find lh.pial. Does that exist?
On Wed, 10 Dec 2014, Xiaomin Yue wrote:
Hi Bruce,
the mris_thickness was looking for ?h.gray file to run
Yes, lh.pial exists
Xiaomin
On Dec 10, 2014, at 10:33 AM, Bruce Fischl fis...@nmr.mgh.harvard.edu wrote:
it only looks for that if it can't find lh.pial. Does that exist?
On Wed, 10 Dec 2014, Xiaomin Yue wrote:
Hi Bruce,
the mris_thickness was looking for ?h.gray file to run
pial and white
what version of FS do you have? You can try runing it with -pial pial but
I wouldn't think that is needed. Is the lh.pial in
/misc/data41/yuex/recon_test/test_DB48/surf/
and is it readable?
On Wed, 10 Dec 2014, Xiaomin Yue wrote:
Yes, lh.pial exists
Xiaomin
On Dec 10
] thickness from pial and white
the thickness you can generate using mris_thikness. Why do you want to
generate a wm.mgz? I guess you could from the wmparc
On Mon, 8 Dec 2014,
Xiaomin Yue wrote:
Hi All,
Cortical surface reconstructed using caret from a high resolution MRI data
(0.25 mm) has
What I mean by inputs is the default files the mris_thickness will be looking
for to run correctly
Xiaomin
On Dec 9, 2014, at 1:08 PM, Xiaomin Yue yu...@hotmail.com wrote:
Hi Bruce,
Thanks for your response. What's the inputs to the mris_thickness? I need
the wm.mgz to generate
Yue wrote:
What I mean by inputs is the default files the mris_thickness will be
looking for to run correctly
Xiaomin
On Dec 9, 2014, at 1:08 PM, Xiaomin Yue yu...@hotmail.com wrote:
Hi Bruce,
Thanks for your response. What's the inputs to the
mris_thickness? I need
. You
could use mris_fill to generate the interior of the ?h.white surface,
then use the aseg to remove non-wm voxels I guess
On Tue, 9 Dec 2014,
Xiaomin Yue wrote:
Thanks very much. Does this create curvature file? Again, is it possible to
generate wm.mgz from those files?
Thanks,
Xiaomin
Hi All,
Cortical surface reconstructed using caret from a high resolution
MRI data (0.25 mm) has been converted to freesurfer format, and viewed
correctly using freeview. My questions
are whether it is possible to generate 1) a ?h.thickness from the ?h.pial and
?h.white; 2)
. Attached is the
registration log file.
Any suggestions will be appreciated.
Xiaomin Yue Logfile for bbregister
Thu Oct 16 10:54:36 EDT 2014
setenv SUBJECTS_DIR /misc/data41/yuex/human_anat
cd /misc/data41/yuex/humanfMRI/human_curvature/subjdata/field090514
/field090514
bbregister --s field --init-spm --6 --bold --mov bold/template.nii --reg
bold/register.dof6.dat --init-reg-out bold/init.register.dof6.dat
On 10/16/2014 11:14 AM, Xiaomin Yue wrote:
Hi,
When I used preproc-sess processing my data, the registration output
is off
12:04 PM, Xiaomin Yue wrote:
Hi Doug,
Thanks for the promptly response. I do have spm8 and spm12b
installed. Which version should I use? Also, how to change the spm
as the inital registration method in the preproc-sess?
Xiaomin
Date: Thu, 16 Oct 2014 12:00:04 -0400
From
The title has been FedEx for overnight. Please let me know after getting it.
Xiaomin
From: Thomas, Adam (NIH/NIMH) [E]mailto:ad...@nih.gov
Sent: 7/30/2014 6:36 AM
To: freesurfer@nmr.mgh.harvard.edumailto:freesurfer@nmr.mgh.harvard.edu; FSL
- FMRIB's Software
Hi,
I had successfully reconstructed a primate brain using fs5.3. But one part of
left anterior temporal lobe was not correct, even with the accurate wm.mgz.
See attached image for what I mean. Are there parameters to be used to correct
this problem?
Thanks,Xiaomin
Hi,
My edited wm.mgz was saved as wm.edited.mgz, then it copied to wm.mgz. I
re-run the anlysis using recon-all -s cologna -autorecon2-wm. From some
reason, the analysis regenerated wm.mgz from brain.mgz, which of course
replaced my edited wm.mgz. Did I do some wrong here?
. Have you checked?
Bruce
On Fri, 25 Jul 2014, Xiaomin Yue wrote:
Hi,
My edited wm.mgz was saved as wm.edited.mgz, then it copied to wm.mgz. I
re-run the anlysis using
recon-all -s cologna -autorecon2-wm. From some reason, the analysis
regenerated wm.mgz from brain.mgz,
which
Subject: Re: [Freesurfer] wm.mgz
What version? Check the voxels you erased and see if they were set to 1 instead
of 0
On Jul 25, 2014, at 8:39 PM, Xiaomin Yue yu...@hotmail.com wrote:
Hi Bruce,
Thanks for your response. the editing was done in freeview. I saved the
edited version
they are 1
On Jul 25, 2014, at 9:33 PM, Xiaomin Yue yu...@hotmail.com wrote:
It is 5.3. The voxels erased was set as 0. Is that the problem? If so, I
can try to replace 0 with 1.
Xiaomin
From: Bruce Fischl
Sent: 7/25/2014 9:22 PM
To: Freesurfer support list
Subject: Re: [Freesurfer
] Basename error
what is your command line and terminal output
On 6/19/14 4:36 PM, Xiaomin Yue wrote:
Hi all,
I am analyzing functional data using fsfast 5.3 with the
error: Error using== basename
thread in the above link.
Any suggestions? Thanks,
Xiaomin Yue ___
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu
https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
The information in this e-mail
try to follow the first few steps of the HiresRecon
(http://surfer.nmr.mgh.harvard.edu/fswiki/HiResRecon). The parameters of the
inhomogeneity correction are optimized for 7T data which should help in
reducing errors due to strong bias fields.
Best,Falk
Von: Xiaomin Yue
Gesendet: Mittwoch, 2
?highlight=%28use%5C-mritotal%29
-jon
On Fri, 28 Mar 2014, Xiaomin Yue wrote:
I tried to do surfer reconstruction (version 5.3) collected in SIEMENS
7T, with error: imgreg_4dfp
/opt/freesurfer-530/average/711-2C_as_mni_average_305
/opt/freesurfer-530/average/711
parameter: -use-mritotal. My question is
how the -use-mritotal parameter would affect final surface?
Thanks for providing your input on this.
Xiaomin Yue
___
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu
https
aborted
Any idea what could be the cause?
Thanks,Xiaomin Yue
___
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu
https
conditions in the steps of generating design matrix?
If so, what command should be used?
Thanks,Xiaomin Yue___
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu
https://mail.nmr.mgh.harvard.edu/mailman/listinfo
-0400
From: fis...@nmr.mgh.harvard.edu
To: freesurfer@nmr.mgh.harvard.edu
Subject: Re: [Freesurfer] B1 correction
Hi Xiaomin
can you be more specific? What kind of B1 field map did you collect? Do
you mean B1 transmit or receive?
cheers
Bruce
On Mon, 24 Mar 2014, Xiaomin Yue wrote:
Hi,
B1
thanks.
Xiaomin Yue
Date: Wed, 26 Mar 2014 11:54:58 -0400
From: fis...@nmr.mgh.harvard.edu
To: freesurfer@nmr.mgh.harvard.edu
Subject: Re: [Freesurfer] B1 correction
Hi Xiaomin
do you mean dividing by the Jacobian of the B0 unwarping field? Are you
sure it's not B1? That is by far the more
Subject: Re: [Freesurfer] fsfast question
Sorry, I don't follow what you are asking. FSFAST does not do any drift
removal from the raw data, all of that is in the design matrix
doug
On 03/26/2014 10:45 AM, Xiaomin Yue wrote:
Hi,
The analysis necessary to my study is to run some analysis
, then run selxavg3-sess with -no-con-ok and -svres to
save the residuals.
maybe that solves your problem?
caspar
2014-03-26 14:38 GMT-04:00 Douglas N Greve gr...@nmr.mgh.harvard.edu:
No, sorry
On 03/26/2014 01:54 PM, Xiaomin Yue wrote:
I like to regress out the linear drift, mean
Douglas N Greve gr...@nmr.mgh.harvard.edu:
No, sorry
On 03/26/2014 01:54 PM, Xiaomin Yue wrote:
I like to regress out the linear drift, mean, and head motion
generated by the motion correction step of fsfast from the raw time
course only. Is it possible using fsfast?
Xiaomin
Date: Wed
Hi,
B1 field correction was collected during the scan. My question is how it can
be used in the surface reconstruction?
Thanks,
Xiaomin Yue ___
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu
https
84 matches
Mail list logo
