OK, I didn't get anywhere, so I tried this on another PC with a similar config.
Again I used the mint repositories to install freevo 1.8.1 through synaptic and
had similar porblems. I then used standard channels and not frequencies, again
similar problems. Then I uninstalled freevo via synaptic
markus frei wrote:
I have at least 2 issues with freevo 1.8.1 (installed in mint 6 from
repositories and using tvtime with a pinnaclesys tv pro card):
1). Tvtime itself works great, and I'm using frequencies to tune the
channels, as that gives me better quality and I don't have to
On Thu, 15 Jan 2009, markus frei wrote:
When freevo adds it's info to the tvtime stationlist.xml file, it also adds
US Cable to the band identifier. This makes it impossible to actually
tune in to the channel. When I then edit the stationlist.xml file and
change US Cable to Custom, then
On Thu, 15 Jan 2009, markus frei wrote:
2). I can't get any recording from TV to start. I do get a file with the
scheduled recording info, but no recording itself. I tried the instructions
on the following Link where there is a bash script that is run to start
mencoder,
I've changed the tvtime.py file to just return Custom instead of US Cable.
This seems to work for me now, but I guess it isn't the patch you had in mind.
I'll probably also have to repeat the edit when I get system updates.
Original-Nachricht
Datum: Thu, 15 Jan 2009 09:58:48
This is what I have in the local_conf.py file:
VCR_AUDIO = (':adevice=%s' % AUDIO_DEVICE +
':audiorate=32000' + # 44100 for better sound
':forceaudio:forcechan=1:' + # Forced mono for bug in my driver
'buffersize=64') # 64MB capture
