I suspect that the CVP is reading the ! as an indicator of a shell script to follow or
some other script and so it or the firewall is rejecting the address. One thing to try
would be to use \ before the !, which should alert the CVP that the ! belongs there.
If that works, at least you'll know
Also, keep in mind if you're running FP3, you probably want to install HFA319 or
greater if you want proper disk space monitoring. I changed my log path a while back
and for some reason the disk space alerting mechanism was still reading from the main
disk, not the dedicated log disk. Turns out
Well, in poking around on the knowledge base for a minute, I found two references to
this error message that you might want to take a look at. Those being: SK8118
SK23642, both make reference to part of the error message you included in your post
(but the part you or what came after it
You can get the R54 version of Smartdashboard from the downloads section of the
checkpoint website, it should be a free download. As far as any of the actual FW1
software, you can probably download it from there as well, but it will only work for
15 days unless you have a valid license.
ok.
The express software and licensing is specifically geared toward organizations with
500 users or less.
All of the datasheets etc are located at:
http://www.checkpoint.com/products/express/index.html
Hi all!
Does anybody know what the difference is between an Express gateway
Assuming that none of your GUI clients can connect, you could be having a problem
with disk space on the SmartCenter Server (See sk23575). You may want to check that
first.
-Steve
Hi,
I have a problem with Provider-1 that I have installed in a Sun E280 with
Solaris 8. The CheckPoint
If I understand you correctly, the VPN device on the other side and the
webserver, which is accessable via HTTP (443) have the same IP. Assuming
that you do not have to pass HTTPS over the VPN tunnel for any other reason
(i.e. to another server) you could also go into the VPN community advanced
The problem you're having is that when you copy the upgrade tools from the
CD/ISO. you need to copy migrate, migrate.conf, upgrade_export and
upgrade_import files. The error you posted shows that the migrate.conf file
is missing.
1) Copy migrate, migrate.conf, upgrade_export and upgrade_import to
Woops, should have said $FWDIR/conf/local.arp. Typing too fast with not
enough coffee! :)
On Sat, Apr 16, 2011 at 11:11 AM, Steve Baker sfb...@gmail.com wrote:
Make sure if you have manual proxy ARP defined that you get the info out of
$FWDIR/local.arp as well and adjust as necessary as well