Subject: Proxim Harmony WiFI PC cards - no joy so far
Date: Thu, 28 Aug 2003 20:29:34 -0400
From: Dan K [EMAIL PROTECTED]
I've not been able to get Proxim Harmony cards to work with 10.2.x (in
a
Lombard) and the opensource driver. So much for my $15/each 'bargain'
WiFI cards. Oh pooh! :-\
It sounds like it might be power line interference or interference from
your monitor. If it's monitor interference, you might try moving the
wires to see if you can reduce it. If it's power supply noise, then
good luck, there's not much you can do about it except spend more money
on better
Re;if you move your book around very much,you may also want a tube of
(loc-tite blue) so as to secure the screws from loss,do not use the
red for this.
What size torque screwdriver is necessary for separating the hard
drive
from
its frame on a Pismo Firewire?
It's a #8
Is this the only
I have recently had the small door on my Pismo (the little door that
covers the partial gap when you have a battery in the right-hand bay) get
detached from its moorings (?). The springs all appear still fastened to
the back of the door (that little 1 to 1.25 long one), but I cannot
figure how
Just a quick Q for you Lombard and Wallstreet users which sets of
video drivers are you guys using for OS 9, and how is the video quality?
(The Oct 2002 drivers from ATi seem to have these glitches... I set my
monitor to Millions, but it looks like it is still dithering down to
Thousands
On Friday, August 29, 2003, at 08:40 PM, tivo wrote:
It sounds like it might be power line interference or interference
from
your monitor. If it's monitor interference, you might try moving the
wires to see if you can reduce it. If it's power supply noise, then
good luck, there's not much you
I'm finally going to take the plunge and upgrade from 9 to X on my Wallstreet II and
have a few pretty basic (I think) questions:
1. Firmware: I stumbled upon an Apple web site that indicates that the older iMacs
(with CRT's) require a firmware upgrade prior to upgrading to X. Same with WS
From: Steve Kerney [EMAIL PROTECTED]
2. Disk Partitioning: I've presently partioned my 40G drive into a just less
than 8 for X (yes the 1st per previous posts on this forum) and 3 others (1
for OS 8, 1 for OS 9 and 1 for Data). A) Will X load on a partion created
by 9 or do I have to
