On Fri, September 15, 2006 8:48 am, Kevin O'Gorman wrote:
My mail queue is chock full of messages that appear to be
error-reports from MAILER_DAEMON to the effect that some piece of mail
is undeliverable. The form of the messages is baffling to me, and I
cannot figure out what the original
I found the error, my fault.
At the beginning I've put into the make.conf an USE=-X -ipv6
at that point I had some packet compiled without the X support, than
after have correct it I try to emerge xorg-x11, and got the error.
After a good night I remember to do an emerge -uDN world, now
On Friday 15 September 2006 07:52, Rumen Yotov wrote:
Just a sidenote here, if knowing you'll have to rebuild after expat
downgrade you could run revdep-rebuild --library libexpat.so.1 before
and save the order/list of packages.
Of course, however, revdep-rebuild still don't have a clue about
On 9/14/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Something isn't working as planned. There were no files produced in
/tmp.
Odd. Where does /usr/libexec/cups/backend/smb point to?
-Richard
--
gentoo-user@gentoo.org mailing list
Has anybody tried updating glibc to the latest stable 2.4-r3, but
without also updating gcc to 4.1.1? Any problems?
From the ebuild, =sys-devel/gcc-3.4.4 should be supported.
I'd like to do the updates separately if possible.
Thanks.
-- Remy
Remove underscore and suffix in reply address for a
On Fri, 15 Sep 2006 12:30:33 +0800 (CST), Stephen Liu wrote:
What DVD/CD burning packages will you recommend to emerge on Gentoo
other than Gnomebaker and K3b. TIA
That depends on the type of discs you want to make. I prefer plain old
kisofs + growisofs for data DVDs and tovid for video DVDs.
Hi,
I'm trying to setup sql-ledger but i'm struck at apache, it gives 500 error to
browser. Logs shows this:
Warning: PHP Startup: Unable to load dynamic
library '/usr/lib64/php5/lib/php/extensions/no-debug-non-zts-20050922/pdo.so' -
On Thursday 14 September 2006 18:46, Dan Johansson wrote:
Today I did the mistake of re-emerging
(emerge --update --deep --verbose --newuse world --pretend
) x11-base/xorg-x11-6.8.2-r8 as a result of a changed USE-flag
(GAPING_SECURITY_HOLE). Now when I try to do a new
emerge --update --deep
Warning: Cannot load module 'pdo_pgsql' because required module 'pdo' is not
loaded in Unknown on line 0
I'm not using pdo, but do you have dev-php5/pecl-pdo installed?
Should be pulled in as a dependency of dev-php5/pecl-pdo-pgsql.
You may also try to rebuild pecl-pdo with postgres flag.
Do
On Fri, 15 Sep 2006 09:11:56 +0100
Neil Bothwick [EMAIL PROTECTED] wrote:
On Fri, 15 Sep 2006 12:30:33 +0800 (CST), Stephen Liu wrote:
What DVD/CD burning packages will you recommend to emerge on Gentoo
other than Gnomebaker and K3b. TIA
That depends on the type of discs you want to
On Fri, 15 Sep 2006 09:27:06 +0200
Bo Ørsted Andresen [EMAIL PROTECTED] wrote:
On Friday 15 September 2006 07:52, Rumen Yotov wrote:
Just a sidenote here, if knowing you'll have to rebuild after expat
downgrade you could run revdep-rebuild --library libexpat.so.1
before and save the
On Friday 15 September 2006 12:23, Alexander Kirillov wrote:
I'm not using pdo, but do you have dev-php5/pecl-pdo installed?
Should be pulled in as a dependency of dev-php5/pecl-pdo-pgsql.
You may also try to rebuild pecl-pdo with postgres flag.
Do you sometimes emerge --update --newuse --deep
I did and I totally screwed up my system. I managed to fix it eventually by booting to a live CD and untaring the quickpkg I made into the / directory.I might have done something wrong to cause this but I'm not sure what it was. Anyways, make sure you do quickpkg before hand, and secondly, don't
On Thu, 14 Sep 2006 23:19:17 +0200 Alexander Skwar [EMAIL PROTECTED] wrote:
That dialog has a lot more options than the dialog shown in Gentoo.
In Gentoo, I do not have Ruhezustand (Hibernate) and the dialog
looks a lot simpler.
What do I have to do, to get the Ubuntu gnome logout dialog in
Hi,
Is it possible to install hardened vserver together?
On mirrors in /experimental/arch/ I can see stages
for both of them, but not together...
The same with kernel: there are vserver-sources
and hardened-sources, but how to put them together?
Is it actually possible???
Jarry
--
Feel free
On Friday 15 September 2006 01:08, David Grant wrote:
Is anyone else getting:
This is an automatically generated Delivery Status Notification.
Delivery to the following recipients failed.
[EMAIL PROTECTED]
every time they send an email to [EMAIL PROTECTED]
David Grant wrote:
I did and I totally screwed up my system. I managed to fix it eventually
by booting to a live CD and untaring the quickpkg I made into the /
directory.
Yes, I saw your posts on bug 125868 [1].
... and secondly, don't
do it until you get some responses back from others who
On Fri, 2006-09-15 at 08:49 +0930, Iain Buchanan wrote:
On Thu, 2006-09-14 at 18:01 +0100, Alex Bennee wrote:
Hi,
When I logout of gnome it no longer asks me if I wish to save the
session and as a result I lose all my session data each time I logout.
Anyone know where this went? Is
Don't mean to hijack this thread, but my situation is probably similar to the
OP.
On Friday 15 September 2006 02:57, Daniel Iliev wrote:
Iain Buchanan wrote:
Finally, if it still doesn't work, post what you see from
tail -f /var/log/messages
or whatever your syslog is, when you press the
On Friday 15 September 2006 11:02, Robert Cernansky wrote:
To add hibernate option you have to set SuspendCommand variable in
/etc/X11/gdm.conf. However I found out that if I set this to hibernate
script, it is not executed.
SuspendCommand=/usr/sbin/hibernate
I'm trying to get it work but
Hi Neil,
Tks for your advice.
That depends on the type of discs you want to make. I prefer plain
old
kisofs + growisofs for data DVDs and tovid for video DVDs.
Mainly for data burning.
Do I need both of them or only either one? Do I need cdrecord as
well?
What will the correct command to
On Friday 15 September 2006 12:47, Mick wrote:
Don't mean to hijack this thread, but my situation is probably similar to
the OP.
On Friday 15 September 2006 02:57, Daniel Iliev wrote:
Iain Buchanan wrote:
Finally, if it still doesn't work, post what you see from
tail -f
Am Freitag, 15. September 2006 12:55 schrieb ext Stephen Liu:
What will the correct command to emerge them?
# emerge -pv kisofs
then
# emerge kisofs
I'd guess this is a little typo: should be mkisofs. This is part of the
famous cdrtools package. Don't know where growisofs comes from.
Hi Rumen,
Check gnome-extra/nautilus-cd-burner don't know if it's included in
gnome-light though.
gnome-light is a very basic desktop with a few packages installed.
Application
Accessories - Terminal
Internet - SeaMonkey
System Tools - Avahi Zeorconf Browser/File Browser/New Login/New Login
Hi, there,
After gcc upgrade to 4.1.1 I've been having a problem with comix. It
complains it needs PyGTK 2.8 or greater to work properly.
However, I have PyGTK 2.8.6 installed.
I have tried reemerging comix a couple of times, even reemerge PyGTK
before reemerging comix and still comix keeps
On Fri, 15 Sep 2006 13:21:34 +0200, Dirk Heinrichs wrote:
# emerge kisofs
I'd guess this is a little typo: should be mkisofs.
It is, aybe y '' key has stopped working :)
This is part of the
famous cdrtools package. Don't know where growisofs comes from.
dvd+rw-tools. It does for DVDs
On Fri, 15 Sep 2006 11:50:59 +0100 Mick [EMAIL PROTECTED] wrote:
On Friday 15 September 2006 11:02, Robert Cernansky wrote:
To add hibernate option you have to set SuspendCommand variable in
/etc/X11/gdm.conf. However I found out that if I set this to
hibernate script, it is not
On Wed, 23 Aug 2006, Nick Rout wrote:
I have taken the liberty of emailing Holly directly to ask where she has
got to, cos the guys are missing her. I'll let you know if she
replies...
...Well?
On Tue, 22 Aug 2006 19:49:20 +0100
Uwe Thiem wrote:
On 22 August 2006 19:29, John J. Foster
Hi,
I've emerged spamassassin 3.1.5 (mail-filter/spamassassin-3.1.5 USE=berkdb
ipv6 mysql postgres sqlite ssl -doc -ldap -qmail -tools) but whenever I
try to run it either via procmail or from the command line I get the following
errors
[21312] warn: Use of uninitialized value in numeric ge
Neil Bothwick wrote:
On Fri, 15 Sep 2006 13:21:34 +0200, Dirk Heinrichs wrote:
# emerge kisofs
I'd guess this is a little typo: should be mkisofs.
It is, aybe y '' key has stopped working :)
:-)))
And I almost went to have a look at this new KDE application kisofs
for burning DVDs :-)
Richard Fish [EMAIL PROTECTED] writes:
On 9/14/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Something isn't working as planned. There were no files produced in
/tmp.
Odd. Where does /usr/libexec/cups/backend/smb point to?
I did check that as you suggested, before replacing smbspool.
ls
The minimal USE flag might be nice to have.
james wrote:
Ryan Tandy tarpman at gmail.com writes:
USE= -* hardened pic ncurses ssl acl crypt berkdb tcpd pam perl pcre python
readline bzip2 zlib apm krbr kerberos nptl nptlonly lm_sensors syslog
Try tossing logrotate in there
Hi folks,
As soon as I upgraded my system to new gcc and glibc, I started to get
a very weird problem at boot time. I'm using libnss-mysql to
authenticate users, and my nsswitch.conf is set to check files first,
then mysql.
At boot time, /usr is not yet mounted, and as such, anything that
would
Hi,
(sorry, must have overlooked your last answer...)
On Thu, 14 Sep 2006 01:32:36 -0700 Grant [EMAIL PROTECTED] wrote:
I always seem to get hsync out of range errors trying to go this low.
I guess my card can't go as low as necessary.
Argh, my failure. I must have read 19.5 kHz instead of
Remy Blank [EMAIL PROTECTED] writes:
And I almost went to have a look at this new KDE application kisofs
for burning DVDs :-)
I thought Neil was plonking the OP in verbose mode and simply
miss-pelled `kissoff'.
--
gentoo-user@gentoo.org mailing list
Hi Neil,
Tks for your advice.
dvd+rw-tools. It does for DVDs what cdrecord does for CDs. Despite
the
name, it is for DVD-R(W) as well as DVD+RW
It is the tool for burning both DVD+/-R(W), but not working well on
DVD+R(W)
If you emerge k3b with the dvdr USE flag, it will pull in all of
Hi, I am trying to configure Virtual Mailserver using Postfix, OpenLDAP, and Courier. I am following this site :http://www.crt.realtors.org/projects/email-redir/paper-html/implementation.htmlNow the problem is i have to create another domain under my main domain.My base.ldif file is :--dn:
Hi Dirk,
What will the correct command to emerge them?
# emerge -pv kisofs
then
# emerge kisofs
I'd guess this is a little typo: should be mkisofs. This is part of
the
famous cdrtools package.
Noted with tks.
Would
# emerge cdrtools
including mkisofs?
Don't know where growisofs
On Fri, 15 Sep 2006 23:07:51 +0800 (CST), Stephen Liu wrote:
Whether edit /etc/make.conf
USE=...dvdr
then run;
# emerge --sync emerge -avuDN world
# emerge k3b
The world step is unnecessary unless K3b is already installed.
First do emerge --info to check whether dvdr is already
This morning I discovered my MythTV wasn't working. I tracked the
problem down to ivtv. I was using ivtv-0.4.5 with
kernel-2.6.15-gentoo-r1. I remerged ivtv-0.4.5 and remodprobed ivtv,
but it still didn't work (something about bad module format.) Anyway, I
built a 2.6.17-gentoo-r8 kernel and
(sorry, must have overlooked your last answer...)
On Thu, 14 Sep 2006 01:32:36 -0700 Grant [EMAIL PROTECTED] wrote:
I always seem to get hsync out of range errors trying to go this low.
I guess my card can't go as low as necessary.
Argh, my failure. I must have read 19.5 kHz instead of 15.9
Hello
NFS and SAMBA doesn't mount at boot:
1. NFS
I receive the following message at boot:
Sep 15 14:34:34 [rc-scripts] ERROR: cannot start
nfsmount as net.eth0 could not start
Sep 15 14:34:35 [rc-scripts] ERROR: cannot start
netmount as net.eth0 could not start
/etc/fstab:
On Fri, 2006-09-15 at 10:35 -0500, Michael Sullivan wrote:
This morning I discovered my MythTV wasn't working. I tracked the
problem down to ivtv. I was using ivtv-0.4.5 with
kernel-2.6.15-gentoo-r1. I remerged ivtv-0.4.5 and remodprobed ivtv,
but it still didn't work (something about bad
On 9/15/06, Michael Sullivan [EMAIL PROTECTED] wrote:
SNIP
Total size of downloads: 0 kB
camille ~ # uname -a
Linux camille 2.6.17-gentoo-r8 #1 SMP Fri Sep 15 09:56:25 CDT 2006 i686
Intel(R) Celeron(R) CPU 2.66GHz GNU/Linux
camille ~ #
I cat /dev/video0 temp.mpg and watched it, but there
On 9/15/06, Remy Blank [EMAIL PROTECTED] wrote:
David Grant wrote: I did and I totally screwed up my system. I managed to fix it eventually by booting to a live CD and untaring the quickpkg I made into the / directory.Yes, I saw your posts on bug 125868 [1].
... and secondly, don't do it until
On 9/15/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
ls -l /usr/libexec/cups/backend/smb
lrwxrwxrwx [...] /usr/libexec/cups/backend/smb - /usr/bin/smbspool
Ok. Are you specifying a ServerBin directory in /etc/cups/cupsd.conf?
It should point to /usr/libexec/cups if you are.
Also, I hope
On Fri, 2006-09-15 at 09:38 -0700, Mark Knecht wrote:
On 9/15/06, Michael Sullivan [EMAIL PROTECTED] wrote:
SNIP
Total size of downloads: 0 kB
camille ~ # uname -a
Linux camille 2.6.17-gentoo-r8 #1 SMP Fri Sep 15 09:56:25 CDT 2006 i686
Intel(R) Celeron(R) CPU 2.66GHz GNU/Linux
camille
· Robert Cernansky [EMAIL PROTECTED]:
On Thu, 14 Sep 2006 23:19:17 +0200 Alexander Skwar [EMAIL PROTECTED] wrote:
That dialog has a lot more options than the dialog shown in Gentoo.
In Gentoo, I do not have Ruhezustand (Hibernate) and the dialog
looks a lot simpler.
What do I have to do,
Hi,
Just bought a couple of Gentoo mouse pads from the Gentoo store.
Arrived here on time. Nice enough quality for the price I think. They
look quite nice, although the current design mostly white so I think
they'll probably look sort of dirty before too long.
None the less, if anyone is
· Robert Cernansky [EMAIL PROTECTED]:
On Thu, 14 Sep 2006 23:19:17 +0200 Alexander Skwar [EMAIL PROTECTED] wrote:
That dialog has a lot more options than the dialog shown in Gentoo.
In Gentoo, I do not have Ruhezustand (Hibernate) and the dialog
looks a lot simpler.
What do I have to do,
Im trying to install a 2.6.16-hardened-r11 kernel and
I keep getting this error:
cp: cannot stat 'arch/i386/kernel/bzImage': No such file or
directory
I dld the stage3-x86-hardened-2.6-2006.0.tar.bz2 and
the portage-latest.tar.bz2 files. Ive been following the handbook
instructions
Richard Fish [EMAIL PROTECTED] writes:
On 9/15/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
ls -l /usr/libexec/cups/backend/smb
lrwxrwxrwx [...] /usr/libexec/cups/backend/smb - /usr/bin/smbspool
Ok. Are you specifying a ServerBin directory in /etc/cups/cupsd.conf?
It should point to
On 9/15/06, Michael Sullivan [EMAIL PROTECTED] wrote:
SNIP
OK. I did what you said, and I do get a signal from /dev/video0 now,
That's good...
but mythfrontend still won't show LiveTV.
That's not good...
SNIP
If it's helpful, here's my dmesg info:
camille ~ # dmesg | grep 'ivtv'
On 9/15/06, Steven G Wagner [EMAIL PROTECTED] wrote:
I'm trying to install a 2.6.16-hardened-r11 kernel and I keep getting this
error:
cp: cannot stat 'arch/i386/kernel/bzImage': No such file or directory
Isn't bzImage supposed to be in arch/i386/boot ??
--
Bruno Lustosa [EMAIL PROTECTED]
Is there any downside to enabling USE=hpn for openssh? Description is
here: http://www.psc.edu/networking/projects/hpn-ssh/.
Does anyone know why it isn't enabled by default?
Thanks,
Brian
--
gentoo-user@gentoo.org mailing list
· Brian Davis [EMAIL PROTECTED]:
Is there any downside to enabling USE=hpn for openssh? Description is
here: http://www.psc.edu/networking/projects/hpn-ssh/.
I'm using it and haven't noticed anything bad - which doesn't
mean much, of course.
Does anyone know why it isn't enabled by
That was it, thanks a lot! Thanks a million, I can't believe I overlooked
that in the handbook!
-Original Message-
From: Bruno Lustosa [mailto:[EMAIL PROTECTED]
Sent: Friday, September 15, 2006 11:14 AM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] cp: cannot stat
On Friday 15 September 2006 11:58, Bo Ørsted Andresen wrote:
Perhaps [1] will give you a clue. Otherwise feel free to ask again.
[1]
http://gentoo-wiki.com/HOWTO_Shutdown_headless_server_when_power-button_pre
ssed
Thanks! I hadn't spotted this article. I've tried adding the following two
On Friday 15 September 2006 18:53, Steven G Wagner wrote:
I'm trying to install a 2.6.16-hardened-r11 kernel and I keep getting this
error:
cp: cannot stat 'arch/i386/kernel/bzImage': No such file or directory
If at that moment you typed pwd you would see that you were not in
the
On Friday 15 September 2006 20:14, [EMAIL PROTECTED] wrote:
What simple app, preferably cmdline, do people use to view hdd
temperatures?
app-admin/hddtemp
Latest version available: 0.3_beta15
Latest version installed: 0.3_beta15
Size of downloaded files: 751 kB
Mick schrieb:
On Friday 15 September 2006 18:53, Steven G Wagner wrote:
I'm trying to install a 2.6.16-hardened-r11 kernel and I keep getting this
error:
cp: cannot stat 'arch/i386/kernel/bzImage': No such file or directory
If at that moment you typed pwd you would see that you
On Fri, 15 Sep 2006 21:53:18 +0200, Norman Rieß wrote:
Also my kernel isn´t in arch/i386/kernel/bzImage but in
arch/i386/boot/bzImage.
make install would have copied the kernel without all this hassle.
--
Neil Bothwick
Distrust any enterprise that requires new clothes. - Henry David
2006/9/15, Mick [EMAIL PROTECTED]:
On Friday 15 September 2006 11:58, Bo Ørsted Andresen wrote:
Thanks! I hadn't spotted this article. I've tried adding the following two
lines in /etc/acpid/event/default but nothing much happened (as per the log
further down):
event=button[ /]power.*
quoth the Neil Bothwick:
On Fri, 15 Sep 2006 21:53:18 +0200, Norman Rieß wrote:
Also my kernel isn´t in arch/i386/kernel/bzImage but in
arch/i386/boot/bzImage.
make install would have copied the kernel without all this hassle.
Well, not much of a hassle if he had just gotten the path
On Friday 15 September 2006 21:18, Nico Schümann wrote:
Well, my configuration slightly differs from your one.
--- /etc/acpid/events/default
event=.*
action=/etc/acpi/default.sh %e
No it doesn't really. The default entries in mine were as you show above. I
just followed the comments in
Brian Davis wrote:
The minimal USE flag might be nice to have.
Apparently the official position on that one is that it should be used
(pardon the pun ;)) only in /etc/portage/package.use. I know that in my
case, having it turned on globally caused Shorewall not to work
(requires iproute2
On Fri, 15 Sep 2006 15:26:10 -0700, darren kirby wrote:
I seem to recall getting bitten in the past by 'make install'. I think
it overwrote my existing kernel, and insisted on running lilo (I use
grub). I have just moved it manually since.
I just had a look at 'make help':
install
On Wednesday 13 September 2006 13:15, Bo Ørsted Andresen wrote:
You are missing /etc/profile. Only thing this requires is the file is
located in /etc/profile.d, ends on .sh and is readable and sourceable by
the user. Probably just a permissions problem.
I think I am not missing any condition:
On Wednesday 13 September 2006 14:20, Lukasz Pawelczyk wrote:
Just remember that those aliases will stay only in login shell, any
other shell level wont keep them. There should be something like
/etc/shrc.d/ sourced by bashrc for such things.
Probably this is the problem. When I run the
On Fri, 2006-09-15 at 11:04 -0700, Mark Knecht wrote:
On 9/15/06, Michael Sullivan [EMAIL PROTECTED] wrote:
SNIP
OK. I did what you said, and I do get a signal from /dev/video0 now,
That's good...
but mythfrontend still won't show LiveTV.
That's not good...
SNIP
If it's
On 9/15/06, Mick [EMAIL PROTECTED] wrote:
case $group in
button)
case $action in
power)
/sbin/init 0
;;
You need to add a sleep case here to do whatever you want to happen
when you
On 9/15/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
DEVICE_URI=smb://reader:[EMAIL PROTECTED]/chub-print)
And *now* see the problem.
There should absolutely positively *not* be a ')' at the end of this
line. You need to fix printers.conf to remove this. Sigh...so much
work for such a
Thanks, yes, that did fix it. However it's strange b/c I have had PARALLEL
on for years ever since I first learned of it. Only with this new baselayout
did the loading change to this other way of displaying it. Hmm...
DÆVID
-Original Message-
From: Iain Buchanan [mailto:[EMAIL
HI, everyone!
I had a system lock-up during heavy hdd activity. This caused huge file
system problems. I hardly restored the system in order to boot, but
finally I had a successful emerge -e system. Now I have some problems
left and I will appreciate your help to solve them.
I can start my
On Fri, 15 Sep 2006 17:07:21 -0700, Daevid Vincent wrote:
Thanks, yes, that did fix it. However it's strange b/c I have had
PARALLEL on for years ever since I first learned of it. Only with this
new baselayout did the loading change to this other way of displaying
it. Hmm...
Because the
On 9/15/06, Michael Sullivan [EMAIL PROTECTED] wrote:
On Fri, 2006-09-15 at 11:04 -0700, Mark Knecht wrote:
SNIP
OK. I installed the 2.6.17-gentoo-r2 kernel and remerged ivtv, then
rebooted. It still doesn't work. Here's the info:
It does look better though. The removal messages are
On Fri, 2006-09-15 at 17:36 -0700, Mark Knecht wrote:
On 9/15/06, Michael Sullivan [EMAIL PROTECTED] wrote:
On Fri, 2006-09-15 at 11:04 -0700, Mark Knecht wrote:
SNIP
OK. I installed the 2.6.17-gentoo-r2 kernel and remerged ivtv, then
rebooted. It still doesn't work. Here's the
I think I am not missing any condition:
$ ls -al /etc/profile.d/aliases.sh
-rw-r--r-- 1 root root 33 2006-09-09 12:56 /etc/profile.d/aliases.sh
Assuming this is supposed to be a shell script try changing the file
so it is rwxr-xr-x (755). ex: chmod 755 /etc/profile.d/aliases.sh
For a script
Ryan Tandy wrote:
rob wrote:
How do you get power pitten to shutdown and power off Gentoo box
rob
# emerge sys-power/acpid
# rc-update add acpid default
# /etc/init.d/acpid start
and you're done! The default configuration for acpid includes a handler
for the power button event.
HTH.
On 9/15/06, Neil Bothwick [EMAIL PROTECTED] wrote:
On Fri, 15 Sep 2006 17:07:21 -0700, Daevid Vincent wrote: Thanks, yes, that did fix it. However it's strange b/c I have had PARALLEL on for years ever since I first learned of it. Only with this
new baselayout did the loading change to this other
Hi,
i already has openssl 0.9.8c installed. OpenSSH worked fine. Then, there
was a new ebuild with had an sse2 useflag. So i installed it, but i
didn't recompile openssh. Now, ssh and sshd do segfault! Do you have the
same issue? I already had this issue on 2 PCs.
I have to recompile OpenSSH.
On 9/15/06, Michael Sullivan [EMAIL PROTECTED] wrote:
SNIP
Can you send me an ls -l of your TV partition so that I can see what the
permissions should be? When I ran mythtv-setup it gave me a message
about not being able to create .test because of some permissions issue.
I found a site online
Chock this one up to a Stupid Mistake On My Part. When I deleted my
capture card in mythtv-setup and recreated it, I forgot to tell
mythtv-setup that it was a PVR-x50. I changed it and it seems to work
fine now, even with the 2.6.17-gentoo-r8 kernel. Thanks for your help!
-Michael Sullivan-
--
I've installed postgres and am trying to get it to work with OpenOffice 2.0.3.
After searching the web, postgres sites, unixODBC site, etc. I still haven't
figured out how to get ODBC and JDBC to see postgres. How do I setup ODBC and
JDBC so that my postgres databases are available? Any docs,
Glad you got it working.
Have a good weekend.
Cheers,
Mark
On 9/15/06, Michael Sullivan [EMAIL PROTECTED] wrote:
Chock this one up to a Stupid Mistake On My Part. When I deleted my
capture card in mythtv-setup and recreated it, I forgot to tell
mythtv-setup that it was a PVR-x50. I changed
On 9/15/06, David Grant [EMAIL PROTECTED] wrote:
Forget it, I gave up on ssmtp as it is the problem. I've now gone to postfix
and it is so much easier. Setting up postfix involed 3 simple steps. Setting
relayhost in /etc/postfix/main.cf and creating .forward files in root and
normal user
quoth the Neil Bothwick:
Yes I can. I believe it runs lilo is lilo is present, because you need to
re-run lilo when installing a new kernel, but I use GRUB so that's not an
issue. The kernel is copied to vmlinuz-version (or vmlinux-version on
PPC, don't ask me why) and symlinked to vmlinuz.
87 matches
Mail list logo
