Hello everyone,
I just upgraded to libxcb 1.4, and the only side effect so far is that
I cannot get gimp to compile.
The build log clearly points to the broken libxcb dependency, although
I followed the Upgrade Guide:
--
/bin/sh ../../libtool --tag=CC
I am experiencing the same problem as you described. Will probably only be
able to further look at it tonight or tomorrow night.
Regards
Dirk
On Wednesday 07 October 2009 06:34:06 alain.didierj...@free.fr wrote:
Thanks all for the help. Finally the problem was solved by re-compiling all
X11 drivers used, and most notably xf86-input-keyboard xf86-input-mouse.
I still think that any package update that breaks a working config
On 06-10-2009, Dirk Uys dirkc...@gmail.com wrote:
I was busy doing a system upgrade which failed halfway (due to the libxcb
upgrade thing). This left my mplayer broken since ffmpeg was upgraded i
guess. No problem, just emerge mplayer again. Tried it, and the emerge got
stuck at Checking for
Denis schrieb:
Hello everyone,
I just upgraded to libxcb 1.4, and the only side effect so far is that
I cannot get gimp to compile.
Because you're using libxcb from unstable you could try to use gimp-2.6.7 also
from unstable -- with that combination i haven't experienced any problems.
On Tue, Oct 6, 2009 at 8:49 PM, Volker Armin Hemmann
volkerar...@googlemail.com wrote:
On Dienstag 06 Oktober 2009, Grant Edwards wrote:
On 2009-10-06, Marco listwo...@gmail.com wrote:
[...]
there is a FAT warning. Maybe people should start reading the warnings and
infos instead of panicing
I
Hi all,
When I use nvidia driver on my Xorg I get this error many times:
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x37) [0x8126e5f]
[mi] mieqEnequeue: out-of-order valuator event; dropping.
[mi] EQ overflowing. The server is probably stuck in an infinite loop.
[mi] mieqEnequeue: out-of-order
On Mittwoch 07 Oktober 2009, Marco wrote:
On Tue, Oct 6, 2009 at 8:49 PM, Volker Armin Hemmann
volkerar...@googlemail.com wrote:
On Dienstag 06 Oktober 2009, Grant Edwards wrote:
On 2009-10-06, Marco listwo...@gmail.com wrote:
[...]
there is a FAT warning. Maybe people should start
Hi,
can i have both VM on gentoo ? For example *)Sun JDK 1.5.0.12 and
*)Sun JDK 1.5.0.20 ?
Thanks,
Kaushal
On Wednesday 07 October 2009 11:13:31 Marco wrote:
On Tue, Oct 6, 2009 at 8:49 PM, Volker Armin Hemmann
volkerar...@googlemail.com wrote:
On Dienstag 06 Oktober 2009, Grant Edwards wrote:
On 2009-10-06, Marco listwo...@gmail.com wrote:
[...]
there is a FAT warning. Maybe people
On Wed, Sep 30, 2009 at 6:45 PM, Momesso Andrea
momesso.and...@gmail.com wrote:
I have mail server running netqmail and vpopmail set up following
http://www.gentoo.org/doc/en/qmail-howto.xml.
I can't find a way to make the server taking care of storing all sent
messages.
Googoling around I
Marco wrote:
Hi all,
after emerge --sync emerge --update world --deep my keyboard (in X)
does not work anymore. Since I am switching to slim after boot, I
cannot even change to a console with Ctrl-Alt-F1. I guess something
went wrong with the Xorg-update.
I am now using a live-CD to be
On Wednesday 07 October 2009 11:37:38 Kaushal Shriyan wrote:
Hi,
can i have both VM on gentoo ? For example *)Sun JDK 1.5.0.12 and
*)Sun JDK 1.5.0.20 ?
Yes, but with a twist
Those versions will be in the same SLOT so portage will not install both. You
can install just one or both manually
dhk writes:
Marco wrote:
Hi all,
after emerge --sync emerge --update world --deep my keyboard (in X)
does not work anymore. Since I am switching to slim after boot, I
cannot even change to a console with Ctrl-Alt-F1. I guess something
went wrong with the Xorg-update.
Alt-SysRq-R,
Grant emailgrant at gmail.com writes:
Can anyone suggest where to look?
Could be lots of things.
/usr/portage/sys-process
contains some tools like htop and iotop.
bonnie and bonnie++ can benchmark the HDrive.
could be in the installation. Maybe sync and update
a few times to ensure all
Sebastian Beßler webmaster at darkmetatron.de writes:
I don't now since when exactly as I don't use removable media so often,
but now my HAL-daemon crashes after connecting a removable media.
do you have the latest HAL version?
Mine is 0.5.12_rc1-r8 with KDE4 and recently it was
acting
On 10/06/2009 11:53 PM, Denis wrote:
Hello everyone,
I just upgraded to libxcb 1.4, and the only side effect so far is that
I cannot get gimp to compile.
The build log clearly points to the broken libxcb dependency, although
I followed the Upgrade Guide:
/usr/lib/libxcb-xlib.so.0: undefined
On 10/07/2009 02:29 AM, Arnau Bria wrote:
Hi all,
When I use nvidia driver on my Xorg I get this error many times:
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x37) [0x8126e5f]
[mi] mieqEnequeue: out-of-order valuator event; dropping.
I'm on :
[I] x11-base/xorg-server
Installed versions:
You forgot the very last step of the xcb upgrade:
# rm -i /usr/lib/libxcb-xlib.so*
Read the upgrade guide again :o)
Oops, I figured I didn't know what I was doing, but it always makes
sense in the end :-P
Thanks! That got things all fixed up, including a bunch of other
packages
On Wed, 07 Oct 2009 06:53:33 -0700
walt walt wrote:
That's pretty strange. Have you tried fsck'ing your hard disk?
Reinstalling the nvidia driver?
Yep, bith things, and upgraded kernell too.
Also xorg-server was just updated to 1.6 this week, so you are out of
date now. That doesn't
On Tue, Oct 6, 2009 at 23:15, Frank Steinmetzger war...@gmx.de wrote:
Is there a sane way through this update?
Just remove eselect-news. From looking at eselect's ebuild I deduce that its
functionality is taken over by eselect itself.
I had the same thing a while back. The above is correct.
Hello,
I follow the Installation guide of gentoo. I'm in step
9. Installing Necessary System Tools / 9.a. System Logger
When I emerge syslog-ng, it installs glib-2.20.5 and fails with the
following error:
ebuild.sh, line 49: called src_test
environment, line 2867: called die
die message =
On Tue, Oct 6, 2009 at 10:02 PM, Grant emailgr...@gmail.com wrote:
I just finished installing Gentoo on a Dell Vostro 1320 laptop. It
has a 2.2Ghz Core Duo CPU, 3GB RAM, and a 7200RPM hard drive.
Navigating within firefox is pretty slow. It's the response time of
the application, not the
Hello,
It seems the gentoo version of pciutils does not include the
script to update the pci device ids:
http://pci-ids.ucw.cz/
So I looked at the latest available:
http://pci-ids.ucw.cz/v2.2/pci.ids
Date:2009-09-18 03:15:01
The latest version on gentoo available
via
On Wed, Oct 7, 2009 at 12:10, James wirel...@tampabay.rr.com wrote:
Hello,
It seems the gentoo version of pciutils does not include the
script to update the pci device ids:
I have /usr/sbin/update-pciids as part of the package here...
--
Douglas J Hunley, RHCT
doug.hun...@gmail.com :
Dale rdalek1...@gmail.com writes:
I also know the SysReq key trick now. It can take you back to a console.
I'll bite ... what is it?
On 7 Oct 2009, at 10:42, Andrea Momesso wrote:
On Wed, Sep 30, 2009 at 6:45 PM, Momesso Andrea
momesso.and...@gmail.com wrote:
I have mail server running netqmail and vpopmail set up following
http://www.gentoo.org/doc/en/qmail-howto.xml.
I can't find a way to make the server taking care of
On 7 Oct 2009, at 16:29, Vincent De Groote wrote:
...
I follow the Installation guide of gentoo. I'm in step
9. Installing Necessary System Tools / 9.a. System Logger
When I emerge syslog-ng, it installs glib-2.20.5 and fails with the
following error:
ebuild.sh, line 49: called src_test
Zitat von William Hubbs willi...@gentoo.org:
On Tue, Oct 06, 2009 at 09:30:29PM +0200, Dirk Heinrichs wrote:
Then explain why nox alone always works fine when I use it WITHOUT livecd.
If you are using an older version of xinit, it might work, but it also
causes you to have to reboot before
I just finished installing Gentoo on a Dell Vostro 1320 laptop. It
has a 2.2Ghz Core Duo CPU, 3GB RAM, and a 7200RPM hard drive.
Navigating within firefox is pretty slow. It's the response time of
the application, not the network. It's much slower than my previous
laptop which has much
Harry Putnam writes:
Dale rdalek1...@gmail.com writes:
I also know the SysReq key trick now. It can take you back to a
console.
I'll bite ... what is it?
Some magic commands involving the SysRq key allow actions even if the system
hangs and does not respond. Alt-SysRq-R for example
Alan McKinnon ha scritto:
On Wednesday 07 October 2009 06:34:06 alain.didierj...@free.fr wrote:
Thanks all for the help. Finally the problem was solved by re-compiling all
X11 drivers used, and most notably xf86-input-keyboard xf86-input-mouse.
I still think that any package update that
Doug Hunley doug at hunley.homeip.net writes:
I have /usr/sbin/update-pciids as part of the package here...
My bad. It was not in the old version (stable) but it is
in the latest version.
very cool
thx
James
On Wed, Oct 7, 2009 at 12:40, James wirel...@tampabay.rr.com wrote:
I have /usr/sbin/update-pciids as part of the package here...
My bad. It was not in the old version (stable) but it is
in the latest version.
According to the ebuild, it will even create a cronjob in /etc/cron.monthly
Grant wrote:
I just finished installing Gentoo on a Dell Vostro 1320 laptop. It
has a 2.2Ghz Core Duo CPU, 3GB RAM, and a 7200RPM hard drive.
Navigating within firefox is pretty slow. It's the response time of
the application, not the network. It's much slower than my previous
laptop which
On Wednesday 07 October 2009 19:07:36 bn wrote:
Alan McKinnon ha scritto:
On Wednesday 07 October 2009 06:34:06 alain.didierj...@free.fr wrote:
Thanks all for the help. Finally the problem was solved by re-compiling
all X11 drivers used, and most notably xf86-input-keyboard
Hello,
bzflag will not run
I'm using ati-drivers (9.9-r2) on an AMD64 system.
xdriinfo says?
Xlib: extension XFree86-DRI missing on
display :0.0
Screen 0: not direct rendering capable.
Wnen I recompile ati-drivers I get this:
snip
Found sources for kernel version:
On Wednesday 07 October 2009 18:21:21 Stroller wrote:
On 7 Oct 2009, at 10:42, Andrea Momesso wrote:
On Wed, Sep 30, 2009 at 6:45 PM, Momesso Andrea
momesso.and...@gmail.com wrote:
I have mail server running netqmail and vpopmail set up following
I'm using the last I found:
install-x86-minimal-20090915.iso
Thanks for your reply
vdg
2009/10/7 Stroller strol...@stellar.eclipse.co.uk:
On 7 Oct 2009, at 16:29, Vincent De Groote wrote:
...
I follow the Installation guide of gentoo. I'm in step
9. Installing Necessary System Tools /
kashani kashani-list at badapple.net writes:
I just finished installing Gentoo on a Dell Vostro
Now that it's working how do you like the screen, size, etc? That's one
of the laptops I've been considering.
You just have to admire and honest (Dell) company
Poking around the 1720, I
Rohit writes:
I have seen a cable and a box (USB powered only) which used to make
drives of one machine available to the other.
It was available from scan.co.uk - 2 years back.
I didn't find it there, but now that I looked for such a thing I think I
found a similar one. Thanks! Linux is not
On 7 Oct 2009, at 18:38, Alex Schuster wrote:
Rohit writes:
I have seen a cable and a box (USB powered only) which used to make
drives of one machine available to the other.
It was available from scan.co.uk - 2 years back.
I didn't find it there, but now that I looked for such a thing I
I did some searching and found that this problem is fairly widespread,
but I wasn't able to find a solution to it.
Basically, ever since I upgraded to libxcb-1.4 yesterday, whenever I
launch an application in Xorg, be that firefox, acroread, gimp, etc, I
get:
Xlib: extension Generic Event
I was not able to reproduce this but you may be able to get around it by
removing test from your FEATURES list.
-a
Alex Schuster wrote:
Harry Putnam writes:
Dale rdalek1...@gmail.com writes:
I also know the SysReq key trick now. It can take you back to a
console.
I'll bite ... what is it?
Some magic commands involving the SysRq key allow actions even if the system
hangs and
On Wed, Oct 07, 2009 at 11:42:15AM +0200, Penguin Lover Andrea Momesso squawked:
On Wed, Sep 30, 2009 at 6:45 PM, Momesso Andrea
momesso.and...@gmail.com wrote:
I have mail server running netqmail and vpopmail set up following
http://www.gentoo.org/doc/en/qmail-howto.xml.
I can't find a
On Mon, Oct 05, 2009 at 08:04:03PM -0500, Penguin Lover David Juhl squawked:
I am trying to find away to access files securely from my home computer.
The network I am on is really strict on email attachments and no usb
drives are allowed, so I possibly thought of a website that uses ssl and
a
On Wed, Sep 30, 2009 at 12:45 PM, Momesso Andrea
momesso.and...@gmail.com wrote:
I have mail server running netqmail and vpopmail set up following
http://www.gentoo.org/doc/en/qmail-howto.xml.
I can't find a way to make the server taking care of storing all sent
messages.
Googoling around I
On 10/07/2009 09:49 AM, James wrote:
Hello,
bash: glxgears: command not found
I can't help with the driver, but glxgears is in the mesa-progs package.
On 10/07/2009 11:14 AM, Denis wrote:
I did some searching and found that this problem is fairly widespread,
but I wasn't able to find a solution to it.
Basically, ever since I upgraded to libxcb-1.4 yesterday, whenever I
launch an application in Xorg, be that firefox, acroread, gimp, etc, I
On Wed, Oct 7, 2009 at 9:49 AM, James wirel...@tampabay.rr.com wrote:
Hello,
bzflag will not run
snip
Any suggestions or clarification are most welcome.
snip
Can you send your /var/log/Xorg.0.log file?
-James
On Wed, 7 Oct 2009 18:39:45 +0200, Alex Schuster wrote:
Others allow to kill processes, sync the filesystem, and such. The
combination Alt-SysRq-R-E-I-S-U-B reboots a hanging PC without file
system corruption.
Usually! Sometimes a system can be locked up to badly that there's not
enough
On Wed, Oct 7, 2009 at 12:48 PM, Neil Bothwick n...@digimed.co.uk wrote:
On Wed, 7 Oct 2009 18:39:45 +0200, Alex Schuster wrote:
Others allow to kill processes, sync the filesystem, and such. The
combination Alt-SysRq-R-E-I-S-U-B reboots a hanging PC without file
system corruption.
Usually!
The xorg-server upgrade and the libxcb upgrade go together as pair.
You need to upgrade the server now -- carefully following the upgrade
guide, please.
Thanks - I will do that. But the upgrade guide doesn't have anything
in it, except how to enable Ctrl-Alt-Bkspc to kill the server...
Zitat von Dirk Heinrichs dirk.heinri...@online.de:
Zitat von William Hubbs willi...@gentoo.org:
On Tue, Oct 06, 2009 at 09:30:29PM +0200, Dirk Heinrichs wrote:
Then explain why nox alone always works fine when I use it WITHOUT livecd.
If you are using an older version of xinit, it might
Mark Knecht writes:
On Wed, Oct 7, 2009 at 12:48 PM, Neil Bothwick n...@digimed.co.uk wrote:
On Wed, 7 Oct 2009 18:39:45 +0200, Alex Schuster wrote:
Others allow to kill processes, sync the filesystem, and such. The
combination Alt-SysRq-R-E-I-S-U-B reboots a hanging PC without file
As a related question, does the kernel need to be upgraded from
2.6.27-gentoo-r8 (i686) for the xorg-server-1.6 upgrade? I think the
bulletin mentioned upgrade necessary on an alpha, so I just wanted to
check if I will have all functionality without doing kernel upgrade...
Thank you - sorry for
On 10/07/2009 01:34 PM, Denis wrote:
As a related question, does the kernel need to be upgraded from
2.6.27-gentoo-r8 (i686) for the xorg-server-1.6 upgrade? I think the
bulletin mentioned upgrade necessary on an alpha, so I just wanted to
check if I will have all functionality without doing
On Wed, 7 Oct 2009 13:09:00 -0700, Mark Knecht wrote:
I've seen you guys talk about this and I've never had to use it. I'm
curious about the actual key strokes. Is it
Alt-SysRq and then REISUB
or
Alt-SysRq followed by Atl-R, Atl-E, etc.. ?
Hold down Alt-SysRq while pressing REISUB in
Stroller writes:
On 7 Oct 2009, at 18:38, Alex Schuster wrote:
Rohit writes:
I have seen a cable and a box (USB powered only) which used to make
drives of one machine available to the other.
It was available from scan.co.uk - 2 years back.
I didn't find it there, but now that I
On Wed, Oct 7, 2009 at 4:56 PM, walt w41...@gmail.com wrote:
The tricky part is the libxcb upgrade guide. Did you do all the stuff
it says when upgrading libxcb?
Indeed, with your help, my upgrade for libxcb is complete and appears
successful. :-)
Am 07.10.2009 15:40, schrieb James:
do you have the latest HAL version?
I had the latest HAL version sys-apps/hal-0.5.13-r2
I run ~amd64
Mine is 0.5.12_rc1-r8 with KDE4 and recently it was
acting peculilar until the upgrade to 0.5.12_rc1-r8.
I downgraded to 0.5.12_rc1-r8 and now
On Mittwoch 07 Oktober 2009, James wrote:
Any suggestions or clarification are most welcome.
yes, remove that drm stuff from your kernel as you are told in the error
message. Compileinstall kernel, install ati-drivers, reboot.
Geez - the error tells you exactly the problem!
On Wed, Oct 07, 2009 at 10:14:56PM +0200, Dirk Heinrichs wrote:
Interestingly, I just stumbled accross this again, while updating
config files. After reading the code, I'd say the above is not correct
(at least not on ~x86 with bl2/openrc). Here it works like this:
There's
On Wed, Oct 7, 2009 at 4:08 PM, Alex Schuster wo...@wonkology.org wrote:
Stroller writes:
On 7 Oct 2009, at 18:38, Alex Schuster wrote:
Rohit writes:
I have seen a cable and a box (USB powered only) which used to make
drives of one machine available to the other.
It was available from
On 7 Oct 2009, at 22:08, Alex Schuster wrote:
Stroller writes:
On 7 Oct 2009, at 18:38, Alex Schuster wrote:
Rohit writes:
I have seen a cable and a box (USB powered only) which used to make
drives of one machine available to the other.
It was available from scan.co.uk - 2 years back.
I
On Wed, Oct 7, 2009 at 5:00 PM, Stroller strol...@stellar.eclipse.co.uk wrote:
On 7 Oct 2009, at 22:08, Alex Schuster wrote:
Stroller writes:
On 7 Oct 2009, at 18:38, Alex Schuster wrote:
Rohit writes:
I have seen a cable and a box (USB powered only) which used to make
drives of one
What's the best way to reformat a USB stick? It currently shows this in
fdisk:
===
Disk /dev/sda: 1010 MB, 1010826752 bytes
255 heads, 63 sectors/track, 122 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x91f72d24
Device
Mick wrote:
What's the best way to reformat a USB stick? It currently shows this in
fdisk:
===
Disk /dev/sda: 1010 MB, 1010826752 bytes
255 heads, 63 sectors/track, 122 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier:
On October 7, 2009 10:30:23 pm Mick wrote:
What's the best way to reformat a USB stick?
The thing about USB sticks is that if you want to use them to transfer files
cross-platform (Windows Mac as well as Linux) you have to use a common
filesystem. Typically, I use FAT32 for this since I
I suppose I could run it on a cdr and set up a ssh tunnel...
Dave
On Tue, 2009-10-06 at 05:59 -0400, Willie Wong wrote:
On Mon, Oct 05, 2009 at 08:04:03PM -0500, Penguin Lover David Juhl squawked:
I am trying to find away to access files securely from my home computer.
The network I am on
Hi all,
I updated my system yesterday today and find out that the latest
nvidia-drivers requires old glbc version 2.5. I have goggled for a while
and have not found out the solution. Below is the output of emerge command
emerge -pv nvidia-drivers
These are the packages that would be merged, in
On Donnerstag 08 Oktober 2009, Hung Dang wrote:
Hi all,
I updated my system yesterday today and find out that the latest
nvidia-drivers requires old glbc version 2.5. I have goggled for a while
and have not found out the solution. Below is the output of emerge command
emerge -pv
I just finished installing Gentoo on a Dell Vostro
Now that it's working how do you like the screen, size, etc? That's one
of the laptops I've been considering.
You just have to admire and honest (Dell) company
I had a Dell laptop a few years back. It was the reason for maybe 2
Hello,
I follow the Installation guide of gentoo. I'm in step
Does anybody know what should I do ?
The first thing I *always* do when installing a fresh Gentoo system and
hitting a bug:
1) Google and look at the first page
2) Put the failed package version in /etc/portage/package.mask
Hi,
I'm attempting to upgrade KDE 4. As you can see in the subject line, I
have a problem. Here is the boo boo message:
[ 25%] Building CXX object
kresources/CMakeFiles/kresources.dir/configwidget.o
[ 26%] Building CXX object
kresources/CMakeFiles/kresources.dir/configdialog.o
[ 26%]
On Wed, Oct 7, 2009 at 7:17 PM, Dale rdalek1...@gmail.com wrote:
Hi,
I'm attempting to upgrade KDE 4. As you can see in the subject line, I
have a problem. Here is the boo boo message:
[ 25%] Building CXX object
kresources/CMakeFiles/kresources.dir/configwidget.o
[ 26%] Building CXX
James Ausmus wrote:
On Wed, Oct 7, 2009 at 7:17 PM, Dale rdalek1...@gmail.com
mailto:rdalek1...@gmail.com wrote:
Hi,
I'm attempting to upgrade KDE 4. As you can see in the subject
line, I
have a problem. Here is the boo boo message:
[ 25%] Building CXX object
James Ausmus wrote:
On Wed, Oct 7, 2009 at 7:17 PM, Dale rdalek1...@gmail.com
mailto:rdalek1...@gmail.com wrote:
Hi,
I'm attempting to upgrade KDE 4. As you can see in the subject
line, I
have a problem. Here is the boo boo message:
[ 25%] Building CXX object
On Wed, 7 Oct 2009 16:49:41 + (UTC), James wirel...@tampabay.rr.com
wrote:
Hello,
bzflag will not run
I'm using ati-drivers (9.9-r2) on an AMD64 system.
xdriinfo says?
Xlib: extension XFree86-DRI missing on
display :0.0
Screen 0: not direct rendering capable.
Wnen I
On Thursday 08 October 2009 05.33.18 Dale wrote:
James Ausmus wrote:
On Wed, Oct 7, 2009 at 7:17 PM, Dale rdalek1...@gmail.com
[...]
Hmm - looks like maybe the error is further back in the scroll buffer
- can you send the build log?
[...]
[ 26%] Building CXX object
81 matches
Mail list logo
