directory is: /tmp/tmp.mvQTLnojyc/
Looking in /usr/i686-pc-linux-gnu/ there is no gcc-bin/ directory, hence
the error.
Does anyone have suggestions on how to proceed?
Thanks,
Roger
-install gentoo on a laptop
that had not been updated in a very long time.
Cheers,
Roger
Sebastian Beßler webmas...@darkmetatron.de writes:
Am 14.12.2009 21:39, schrieb Roger Mason:
Hello,
I'm trying to set up a radeon 9600 in an Apple G5 with two monitors.
I've tried both Xinerama and MergedFB.
Hello,
the reason for segfaulting is that you try to use a zaphod style
mix. I learned that the hard way.
You just made my day :)
Zaphod style? What is that?
Cheers,
Roger
you don't get quite the same effect using the Zaphod
from the new movie. Nobody stacks twinview/cinerama like *that*!)
Two headed. Duh! I should have figured it out. I heard HGG on the
radio in the 1970's (?).
Roger
tried MergedFB. That does not crash but i just get two
identical views of my desktop.
Sorry for the long post.
I'd appreciate any help offered.
Thanks,
Roger
Schuster pointed out. It is
small and I have always found that it compiles fine with distcc.
Just passing on a tip I saw in this forum.
Good luck,
Roger
installed.
Roger
should I
change it to? gcc-4.2.4 would only be used for non-portage compiling
so, am I right in thinking that after it is built it would be safe to
revert to -march=core2?
Thanks,
Roger
errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Best wishes,
Roger
:7b,
NAME=eth0
SUBSYSTEM==net, DRIVERS==?*, ATTR{address}==00:10:b5:e0:cc:c8,
NAME=eth1
Yes, that fixed it.
Many thanks,
Roger
not exist
* Please verify hardware or kernel module (driver)
I'd appreciate any help.
Thanks,
Roger
Linux lowalbite 2.6.26-gentoo-r3 #6 Fri Nov 27 14:01:52 NST 2009 i686 Pentium
II (Deschutes) GenuineIntel GNU/Linux
failed.
I don't have totem on my PC
I made a lafilefixer
Thank you for a help
Regards
Roger
.
Perhaps something else?
I tried lafilefixer --justfixit without success.
When we read revdep-rebuild answer we can see
that the broken libs require -lesd
I can't find neither what it means nor what to do...
Roger
edit! Dumb.
Best wishes,
Roger
suggestions or knows for sure that the sound
system on these machines cannot be made to work in Gentoo it would be
useful to find out before I waste more time on it.
Thanks,
Roger
Hello David,
daid kahl daid...@gmail.com writes:
2009/11/6 Roger Mason rma...@mun.ca:
I have an intel iMac Core 2 Duo with an ATI radeon HD 2400 XT video
card. I have not been able to get X working.
I'm also running on an apple machine (macbook), so I might be able to
help. My video
help.
Roger
language so you may be better to read the links than me. ;-)
Thank you Dale for your help.
I'll try to google what you showed me
cheers
Roger
the packages had libltdl.so.3 broken.
I don't know how to make iscan work.
Thank you for help
Roger
.
Roger
... done!
[ebuild R ] media-gfx/iscan-2.11.0
* Now you can remove -p (or --pretend) from arguments and re-run
revdep-rebuild.
Of course, revdep-rebuild iscan failes again!
Isn't anything to do about libsane-epkowa.so.1.0.15 ?
Thank you for your try.
Roger
this is what I wrote in my initial post (I just misspelled it
-python-upgrade -)
OK. Have a nice day.
Roger
Anyway, thanks for helping.
Did you try python-updater?
Regards
Roger
a lot of time searching the web and modifying the
various config files but I can't get the thing to work. Any help will
be much appreciated.
Thanks,
Roger
maybe you're running your own web server?
Maybe the server is chrooted for security purposes?
No nothing to do with a web-server and not chrooted.
Thanks,
Roger
rmason rmason 4096 Nov 4 2003 TrueType
I have tried with and without xfs.
If anyone knows how to get this running please help.
Thanks,
Roger
2003 mk_cache
-rw-r--r-- 1 rmason rmason 65076 Apr 19 2003 trebuchet.ttf
-rw-r--r-- 1 rmason rmason 65236 Apr 19 2003 trebuchetb.ttf
-rw-r--r-- 1 rmason rmason 65196 Apr 19 2003 trebuchetbi.ttf
-rw-r--r-- 1 rmason rmason 71248 Apr 19 2003 trebucheti.ttf
Thanks,
Roger
joerg.schill...@fokus.fraunhofer.de (Joerg Schilling) writes:
Roger Mason rma...@mun.ca wrote:
How can I install libtermcap?
if you like a real libtermcap, check for libxtermcap that comes with the
schily
source consolidation:
ftp://ftp.berlios.de/pub/schily/
Many thanks Joerg
Hello,
I'm trying to compile (outside portage) a program that needs
libtermcap. I installed libtermcap-compat-2.0.8-r2 but that seems not
to provide it (I looked with 'find').
How can I install libtermcap?
Thanks,
Roger
switch freely between compiler versions.
Many thanks to you and to all who responded with suggestions.
Cheers,
Roger
Hello Alex,
Alex Schuster wo...@wonkology.org writes:
Roger Mason writes:
If there is something else that I need to do then I did not see it in
the upgrade guide, so please, will someone enlighten me?
No, your steps worked fine for me.
What is your $PATH? (echo $PATH)
I have /usr/i486
Hello again,
Roger Mason rma...@mun.ca writes:
I need gcc 4.3 to compile a specific application. I am hoping that I
can install gcc 4.3 alongside 4.1.1 without suffering some awful
catastrophe.
Can someone confirm that I'll be able to use gcc 4.3 for the specific
application that needs
seen messages on the Root mailing list from people
working with fiscal data. Root is not lightweight, but is _is_ very
powerful. Root is in portage.
I'm sure there are other very capable systems out there, these are two
that I use (or have used).
Cheers,
Roger
Hello,
Roger Mason rma...@mun.ca writes:
I need gcc 4.3 to compile a specific application. I am hoping that I
can install gcc 4.3 alongside 4.1.1 without suffering some awful
catastrophe. This is the output of emerge on the machine in question:
The compilation finally completed. It only
Hi,
Nikos Chantziaras rea...@arcor.de writes:
On 06/28/2009 08:54 PM, Roger Mason wrote:
[...]
I followed the info presented at the end of the installation
Did you read the Gentoo documentation about upgrading GCC? If not,
now's the time :)
This is what it says:
# emerge -uav gcc
(Please
Hello,
James j...@nc.rr.com writes:
Is there a simple, quick way to list all of the packages that have
been emerged in cronological order?
Listing /var/log/portage with appropriate options to ls may work.
Cheers,
Roger
,
Roger
have run into
the same problem.
Roger
Thank you for your help.
Roger
. Try to re-merge those two and then k3b.
I re-emerged kdelibs and it worked :-)
I didn't understand which the second e-build to re-emerge was.
Nevertheless k3b is again working.
Thank you very much for your helpfull answer.
Roger
with this kind of built-in interface, it will also be good.
Have you thought of attaching a drawing tablet to your existing laptop?
I have a wacom tablet that works pretty well. I think there is an
article on the wiki about installation.
Cheers,
Roger
Simon [EMAIL PROTECTED] writes:
I have scp all distcc config files to all hosts,
One possibility is that you forgot to edit each /etc/conf.d/distccd
file to _listen_ on its own IP address.
HTH,
Roger
Roger Mason [EMAIL PROTECTED] writes:
I'm trying to install firefox-bin on a new (to me) machine.
pango-1.20.3 is a depenency that, unfortunately fails to build:
On a hunch I changed CFLAGS from -mtune=pentium4 to -march=i686 and
did emerge -e world.
Now pango compiles without any problem
-directfb -doc -glitz
-opengl -svg -test -xcb 0 kB
Thanks for any help,
Roger
--
gentoo-user@lists.gentoo.org mailing list
Justin Findlay [EMAIL PROTECTED] writes:
On AD 2008 July 04 Friday 01:02:39 PM -0230, Roger Mason wrote:
/usr/lib/libcairo.so: undefined reference to `__sync_fetch_and_add_4'
Did you try revdep-rebuild, or even just remerging cairo?
I rebuilt cairo several times and revdep-rebuild says
, that was not a problem at all.
Thanks to all.
Roger
--
gentoo-user@lists.gentoo.org mailing list
suggest a next step?
Thanks,
Roger
--
gentoo-user@lists.gentoo.org mailing list
, so
far without any problems.
Thanks for you help.
Roger
--
gentoo-user@lists.gentoo.org mailing list
dany2a [EMAIL PROTECTED] writes:
You've got to update portage first, looks like you have an older portage
version, that cannot handle lzma. Had the same prob and updating portage was
the fix (besides installing lzma-utils).
emerge -a1 portage
That was it.
Thanks very much.
Cheers,
Roger
the topmost build error, and the call
!!! stack if relevant.
I looked on bugzilla, where it was suggested to run:
emerge -1 app-arch/lzma-utils
I did that but the error on m4 persists.
If anyone has a workaround, please pass it on.
Thanks,
Roger
--
gentoo-user@lists.gentoo.org mailing list
.
Cheers,
Roger
--
gentoo-user@lists.gentoo.org mailing list
Justin [EMAIL PROTECTED] writes:
!!! ERROR: sys-devel/m4-1.4.11 failed.
I looked on bugzilla, where it was suggested to run:
emerge -1 app-arch/lzma-utils
I did that but the error on m4 persists.
If anyone has a workaround, please pass it on.
Thanks,
Roger
First try to do
rm
Hello,
Dan Farrell [EMAIL PROTECTED] writes:
On Fri, 11 Apr 2008 11:19:11 -0230
Roger Mason [EMAIL PROTECTED] wrote:
Hello,
I'm trying to configure the firewall on a client to allow that client
to mount an nfs directory. The client runs a netfilter firewall, the
server uses tcpwrapper
Hamie [EMAIL PROTECTED] writes:
On Friday 11 April 2008 13:49:11 Roger Mason wrote:
Hello,
I'm trying to configure the firewall on a client to allow that client
to mount an nfs directory. The client runs a netfilter firewall, the
server uses tcpwrapper.
Do you have the option to run
-AP Edition
My /etc/conf.d/net :
config_wlan0=( dhcp )
essid_wlan0=xx
mode_wlan0=managed
channel_wlan0=10
key_xx=32.78 enc open
How can I do to have wifi at boot?
(I hope I gave you enough information!).
Thank you
Roger
--
gentoo-user@lists.gentoo.org mailing list
: trying 134.153.37.5 prog 15 vers 3 prot udp port 32767
mount: mount to NFS server 'beryl.esd.mun.ca' failed: timed out
(retrying).
If I drop the client firewall the mount succeeds.
Can someone help me figure out what must be put in my iptables script
to get this to work?
Thanks,
Roger
CONFIG_HW_RANDOM_VIA=y
Roger
--
gentoo-user@lists.gentoo.org mailing list
Hi,
I'll have soon a new PC with Processor
Intel Core2 Duo E6850
Which cflags do I need for it?
Thank you very much.
Roger
--
gentoo-user@lists.gentoo.org mailing list
Hi,
I think to buy the following printer:
EPSON Stylus Color D120 Ethernet or Wifi
Has anybody an (good) experience with it?
Thank you for your answers
Roger
--
[EMAIL PROTECTED] mailing list
Hello Randy,
Randy Barlow [EMAIL PROTECTED] writes:
Roger Mason wrote:
I have tried both the ipp and lpd devices to no
avail.
Just FYI, IPP is the Internet Printing Protocol and it is used to print
to a device on another machine, so that's why it didn't work for you here :)
Yes, I finally
-php -samba -slp
Thanks for any help.
Roger
--
[EMAIL PROTECTED] mailing list
Hello Billy,
Billy Holmes [EMAIL PROTECTED] writes:
see if this helps
http://www.murrayc.com/blog/permalink/2005/12/24/wheres-my-parport0/
Bingo!.
For the record, I built ppdev and lp as modules, modprobe'd them and
now everything works.
Thanks very much.
Roger
--
[EMAIL PROTECTED
On Mon, 19 Nov 2007 23:39:29 -0600, [EMAIL PROTECTED] wrote:
What are people using and can vouch for that can snag webpages or
parts of web pages to store/save/organize/report on etc etc, as well
as handling clipboard content or the like? Something to collect
disparate pieces of information
. Then:
sshd[6659880]: error: Failed to allocate internet-domain X11 display
socket.
I can't acces the wiki page at the moment so if someone could help
with further troubleshooting I'd be most grateful.
Thanks,
Roger
P.S. openssh-4.7_p1-r1 on both boxes.
--
[EMAIL PROTECTED] mailing list
isdst=1
/etc/localtime Sun Nov 4 02:31:00 2007 UTC = Sat Nov 3 23:01:00
2007 NST isdst=0
There was a thread on this last March: [gentoo-user] Problems after
DST change
Hope this helps,
Roger
--
[EMAIL PROTECTED] mailing list
and
now X forwarding works.
I am assuming that I failed to set up ipv6 routing or something?
Anyway, the problem is fixed, if not quite solved.
Thanks to everyone who replied.
Roger
--
[EMAIL PROTECTED] mailing list
James [EMAIL PROTECTED] writes:
Any other ideas?
Maybe I need to 'reemerge' something?
timezone-data?
Cheers,
Roger
--
[EMAIL PROTECTED] mailing list
the one specified in the instructions.
tardis tftpboot # ls
lts pxe pxelinux.cfg
Are you using syslinux? I'm not sure but shouldn't there be a
pxelinux.0 file in /tftpboot?
Cheers,
Roger
--
[EMAIL PROTECTED] mailing list
Shawn Haggett [EMAIL PROTECTED] writes:
Roger Mason wrote:
I have passwordless ssh between mymachine and backup_machine and the
rsync command in the crontab runs perfectly from the command line.
Does someone know what else needs to be done to get this (seemingly
simple!) task to work
W.Kenworthy [EMAIL PROTECTED] writes:
Roger Mason wrote:
I have passwordless ssh between mymachine and backup_machine and the
rsync command in the crontab runs perfectly from the command line.
Does someone know what else needs to be done to get this (seemingly
simple!) task to work
the
rmason@ but none worked.
I think I'll try scp and see what happens.
Cheers,
Roger
--
[EMAIL PROTECTED] mailing list
Hi Dirk,
Dirk Heinrichs [EMAIL PROTECTED] writes:
Am Samstag, 3. November 2007 schrieb Roger Mason:
Hello,
I'm trying to use rsync to back up my home directory on mymachine to
another machine (backup_machine) using a cron job.
Which cron?
vixie-cron
This is the crontab entry
Hi Steve,
Steve Dommett [EMAIL PROTECTED] writes:
On Sunday 04 November 2007, Roger Mason wrote:
Thanks for the reply. Unfortunately that did not work, the same error
ocurs.
This may not be applicable, but I run rdiff-backup from cron on many machine
with no problems at all. It uses
/myserver/wwwroot \
-rvtzp --delete --modify-window=1
echo = Closing SSH tunnel
kill $SSL_PID
else
echo ERROR: SSH Connection failed! The backup could not complete
fi
Another responder suggested rdiff-backup. I'll give that a try first.
Thanks,
Roger
--
[EMAIL
=mymachine.esd.mun.ca
user=rmason
I have passwordless ssh between mymachine and backup_machine and the
rsync command in the crontab runs perfectly from the command line.
Does someone know what else needs to be done to get this (seemingly
simple!) task to work?
Many thanks,
Roger
--
[EMAIL
the NFS_* entries in the
respective .congig files: they are identical.
Can someone suggest how I might track this down?
Thanks,
Roger
--
[EMAIL PROTECTED] mailing list
Hi Dan,
Dan Farrell [EMAIL PROTECTED] writes:
On Wed, 03 Oct 2007 08:54:30 -0230
Roger Mason [EMAIL PROTECTED] wrote:
Hello,
I installed a vanilla 2.6.20 kernel in order to (eventually) run
kerrighed. The kernel boots fine but the nfs server won't start and I
see this in the logs
Hello Dan,
Dan Farrell [EMAIL PROTECTED] writes:
On Mon, 01 Oct 2007 12:57:05 -0230
Roger Mason [EMAIL PROTECTED] wrote:
Well, I had it working on Friday but over the weeekend I tinkered some
more with pixegrub and broke it again. Now pxelinux won't work
either.
I've attached my
info and
perhaps someone more knowledgeable will help.
Cheers,
Roger
--
[EMAIL PROTECTED] mailing list
of poor interaction with 3Com cards, which is what I'm using.
Thanks for any help you can offer.
Roger
--
[EMAIL PROTECTED] mailing list
Hello Dan,
Dan Farrell [EMAIL PROTECTED] writes:
On Fri, 28 Sep 2007 14:03:59 -0230
Roger Mason [EMAIL PROTECTED] wrote:
The client boot process hangs, with the following dialog between the
server (192.168.0.2, 00:04:75:77:98:4f) and client (192.168.0.3,
00:01:03:ce:52:a8) repeated three
:98:4f 00:01:03:ce:52:a8, ARP, length 42: arp who-has
192.168.0.3 tell 192.168.0.2
I'm not sure what information is needed to help debug this, but if
anyone is willing to assist I'll provide whatever is required.
Thanks,
Roger Mason
--
[EMAIL PROTECTED] mailing list
Make an alias for that, and you're all set.
Roger
--
[EMAIL PROTECTED] mailing list
, though.
Roger
--
[EMAIL PROTECTED] mailing list
David Relson [EMAIL PROTECTED] writes:
As I want the latest and greatest version of claws-mail
in /etc/portage/package.keywords I have:
mail-client/claws-mail
Should'nt that be
mail-client/claws-mail ~x86
?
HTH,
Roger
--
[EMAIL PROTECTED] mailing list
Neil Bothwick [EMAIL PROTECTED] writes:
Why assume that everyone runs x86? If you don't specify an arch in
package.keywords, if defaults to ~whatever-arch-you-have-in-make.conf
Thanks, learned something new.
Roger
--
[EMAIL PROTECTED] mailing list
I have hald, hald-runner and hald-addon-acpi
but not hald-addon-stor
This last one appears after mounting a cd, dvd or key-usb.
It remains even after I have cd or key removed.
But it disappears after reboot.
How can I get hald-addon-stor remaining in ps -e?
Thanks for your help.
Roger
--
[EMAIL
-stor remaining in ps -e?
Thanks for your help.
Roger
--
[EMAIL PROTECTED] mailing list
On Tue, 26 Jun 2007 18:08:31 -0300, Daniel da Veiga wrote:
Use mplayer...
Actually, when using mplayer to play flash videos, you may find that some
of them have audio/video out of sync unless you use the -correct-pts
option. Alternatively, use ffplay.
--
[EMAIL PROTECTED] mailing list
is with blender or with
some modification of blender carried out by the ebuild. My next step
is to attempt to build blender outside portage. In the meantime, if
anyone has any advice to offer I'd like to hear it. My emerge --info
is given below.
Thanks,
Roger
garnet ~ $ emerge -pv blender
a newer one. Wish
me luck.
You may already have seen this, in which case sorry for the noise:
http://axion.physics.ubc.ca/ppp-linux.html
A number of years ago I followed the steps listed there to get dial-up
into my (Windows centric) university modem pool.
Cheers,
Roger
--
[EMAIL
, the option you want is 'noapic'. It
is by far the largest complaint relating to non-booting livecds on the amd64
architecture.
Thank you to all who replied: the 'noapic' option was the required
fix.
Roger
--
[EMAIL PROTECTED] mailing list
with nosata and with doscsi but the boot process
always hangs. A 2006.1 x86 minimal CD boots perfectly.
Can anyone offer suggestions as to what may be wrong?
Thanks,
Roger
--
[EMAIL PROTECTED] mailing list
MCP51 Serial ATA Controller (rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller(rev a1)
Thanks,
Roger
--
[EMAIL PROTECTED] mailing list
David Snider [EMAIL PROTECTED] writes:
Roger Mason wrote:
I'm trying to install gentoo on a Dell Dimension C521, which has an
AMD Sempron 3400+ CPU.
I downloaded and buned the AMD64 2006.1 minimal install disk, but when I
try
to boot from the CD it hangs, the last message being:
io
further.
Using the techinique you suggested above I was able to track down the
problem to a script in /etc/profile.d that I was using to start
dbus-session-daemon on login. Removing that file fixed the problem.
Many thanks for your help,
Roger
--
[EMAIL PROTECTED] mailing list
Hello Benno,
Benno Schulenberg [EMAIL PROTECTED] writes:
Roger Mason wrote:
I have a strange problem on my laptop[1] wherein I need
sometimes need to enter keystrokes twice in order for them to
be recognised. For example, I type 'ls' but the 's' needs to
be entered twice
trying memtest86 now.
or another OS or gnu/linux distro?
I've never tried: I hope it does'nt come to that, I much prefer Gentoo
over any of the others that I've tried.
Thanks for the help.
Roger
--
[EMAIL PROTECTED] mailing list
passwords and
pass-phrases.
(3) I have never observed the problem when su'd to root.
(4) I have never seen the problem inside screen.
If anyone has any suggestions as to where I might look I'll be most
grateful.
Thanks,
Roger
[1] Details:
Toshiba Satellite M70 SR6
Gentoo Base System
101 - 200 of 240 matches
Mail list logo