at 3:18 AM
From: "Jude DaShiell"
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] emerge-webrsync error
Thanks, if I get to that point I'll remember that number!
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in
Thanks, if I get to that point I'll remember that number!
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that order."
Ed Howdershelt 1940.
On Wed, 22 May 2024, Michael wrote:
> Or, more appropriately if you do not use a desktop
Or, more appropriately if you do not use a desktop then please select profile
No. 21:
[21] default/linux/amd64/23.0 (stable)
On Wednesday, 22 May 2024 16:05:09 BST Michael wrote:
> Ah! OK, this probably explains it.
>
> The latest and now default Gentoo profile is no longer 17.1, but 23.0,
Ah! OK, this probably explains it.
The latest and now default Gentoo profile is no longer 17.1, but 23.0, which
uses a merged /usr directory structure.
Consequently, select profile 23:
[23] default/linux/amd64/23.0/desktop (stable)
On Wednesday, 22 May 2024 15:53:11 BST Jude DaShiell wrote:
I used bash but don't know that there's a problem with bash.
I burnt the whole system to the ground and still have the verified and
validated stage3 file available on my system.
Once stage3 is installed was the tee utility included on stage3? If so I
can capture what's going on. When I ran
You can check while within your chroot, if /dev/fd is a symlink to the
directory /proc/self/fd.
If the above is correct, then there may be a problem with your shell. Check
what you get when you run:
# echo $SHELL
or,
# ps -p $$
Bash should work fine, but from the little I understand about
On Wed, 2024-05-22 at 09:40 -0400, Jude DaShiell wrote:
> Yes, this is during installation.
> I did type:
> mount --rbind /dev /mnt/gentoo/dev
> I was outside of chroot at the time but that's all I did with dev before
> running emerge-webrsync.
>
Ok, that was my one guess. I'm out of ideas,
Yes, this is during installation.
I did type:
mount --rbind /dev /mnt/gentoo/dev
I was outside of chroot at the time but that's all I did with dev before
running emerge-webrsync.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please use in that
Is this during install? Maybe forgot to bind-mount /dev from the real
system into your chroot?
This one is the last two lines of output.
Failed to validate a sane '/dev'.
bash process substitution doesn't work; this may be an indication of a
broken '/dev/fd'.
What did I do wrong?
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
Please
I was doing the emerge-webrsync step in the install instructions for
gentoo and that was to install a gentoo snapshot.
On Fri, 15 Apr 2022, Arve Barsnes wrote:
> On Fri, 15 Apr 2022 at 19:58, Jude DaShiell wrote:
>
> > Found no snapshots on rit.edu and went back from now to March 6, 2022.
> >
On Fri, 15 Apr 2022 at 19:58, Jude DaShiell wrote:
> Found no snapshots on rit.edu and went back from now to March 6, 2022.
> I'm using openrc now. Has gentoo got a site where it shows latest
> available snapshot information for its snapshots?
>
What kind of information are you after?
I
Found no snapshots on rit.edu and went back from now to March 6, 2022.
I'm using openrc now. Has gentoo got a site where it shows latest
available snapshot information for its snapshots?
Hello,
After using emerge-webrsync I got
Updating Portage cache: 100%
*** Completed websync, please now perform a normal rsync if possible.
Update is current as of the of MMDD: 20090219
I am not sure what the message means perform a normal rsync if
possible. I used
On Fri, Feb 20, 2009 at 19:12, de Almeida, Valmor F.
dealmei...@ornl.gov wrote:
Hello,
After using emerge-webrsync I got
Updating Portage cache: 100%
*** Completed websync, please now perform a normal rsync if possible.
Update is current as of the of MMDD: 20090219
I am not
On 8/15/07, kitti jaisong [EMAIL PROTECTED] wrote:
Hi all,
How to check emerge-webrsync is working download ?
Add -v to the command.
emerge-webrsync -v
--
Daniel da Veiga
Computer Operator - RS - Brazil
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++
Hi all,
How to check emerge-webrsync is working download ?
Thanks,
kitti
--
[EMAIL PROTECTED] mailing list
Greetings all.
When running emerge-webrsync I get the following message. Can anyone
help me understand/fix this?
Thanks very much
Adrian
-
Updating Portage cache: 66%Traceback (most recent call last):
File /usr/bin/emerge, line 4049, in ?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Adrian wrote:
File /usr/lib/portage/pym/cache/flat_hash.py, line 47, in _pull
raise cache_errors.CacheCorruption(cpv, e)
cache.cache_errors.CacheCorruption: net-analyzer/etherape-0.9.6-r1 is
corrupt: dictionary update sequence element #2 has
19 matches
Mail list logo
