Hello everybody, As a follow up to the thread subj: is harddrive kaput? the cable is fine.
All the smartctl selftests return w/ no error. But #smartctl -l error /dev/hdb Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Error Log Version: 1 Warning: ATA error count 94 inconsistent with error log pointer 5 ATA Error Count: 94 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 94 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours) When the command that caused the error occurred, the device was in an unknown$ After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 f0 08 00:05:07.920 READ DMA c8 00 08 00 00 00 f0 08 00:05:07.840 READ DMA 10 00 3f 00 00 00 f0 08 00:05:07.824 RECALIBRATE [OBS-4] c8 00 08 00 00 00 f0 08 00:05:07.760 READ DMA c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA Error 93 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours) When the command that caused the error occurred, the device was in an unknown$ After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 f0 08 00:05:07.840 READ DMA 10 00 3f 00 00 00 f0 08 00:05:07.824 RECALIBRATE [OBS-4] c8 00 08 00 00 00 f0 08 00:05:07.760 READ DMA c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA Error 92 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours) When the command that caused the error occurred, the device was in an unknown$ After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 f0 08 00:05:07.760 READ DMA c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA 10 00 3f 00 00 00 f0 08 00:05:07.584 RECALIBRATE [OBS-4] 91 00 3f 3f ff 3f ff 08 00:05:07.584 INITIALIZE DEVICE PARAMETERS [OBS-$ Error 91 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours) When the command that caused the error occurred, the device was in an unknown$ After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA 10 00 3f 00 00 00 f0 08 00:05:07.584 RECALIBRATE [OBS-4] 91 00 3f 3f ff 3f ff 08 00:05:07.584 INITIALIZE DEVICE PARAMETERS [OBS-$ ef 03 44 00 00 00 f0 0e 00:05:07.552 SET FEATURES [Set transfer mode] Error 90 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours) When the command that caused the error occurred, the device was in an unknown$ After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA 10 00 3f 00 00 00 f0 08 00:05:07.584 RECALIBRATE [OBS-4] 91 00 3f 3f ff 3f ff 08 00:05:07.584 INITIALIZE DEVICE PARAMETERS [OBS-$ ef 03 44 00 00 00 f0 0e 00:05:07.552 SET FEATURES [Set transfer mode] ef 03 44 00 00 00 f0 0a 00:05:07.552 SET FEATURES [Set transfer mode] Can somebody explain this discrepancy and are there four errors here or just one repeated four times? What's my next move? -mw __________________________________ Yahoo! Music Unlimited Access over 1 million songs. Try it free. http://music.yahoo.com/unlimited/ -- gentoo-user@gentoo.org mailing list
