On 02/25/2012 06:05 AM, Pandu Poluan wrote:
On Feb 25, 2012 10:34 AM, Nilesh Govindrajan cont...@nileshgr.com
mailto:cont...@nileshgr.com wrote:
Hi,
I'm using XFS on /home and facing a strange issue. When I add acl to
the mount options in /etc/fstab, the FS fails to mount during boot
Hello all,
Usually on gentoo when gentoo-sources gets updated, updating the kernel
went as follows:
eselect kernel set {new kernel}
cd /usr/src/linux
make menuconfig
and then there was a totally clean config which I would then customize
for the specific setup.
On one box I am currently
On 02/23/2012 10:25 AM, Mick wrote:
On Thursday 23 Feb 2012 08:10:56 Coert Waagmeester wrote:
Hello all,
Usually on gentoo when gentoo-sources gets updated, updating the kernel
went as follows:
eselect kernel set {new kernel}
cd /usr/src/linux
make menuconfig
and then there was a totally
On 02/23/2012 11:17 AM, Neil Bothwick wrote:
On Thu, 23 Feb 2012 10:51:43 +0200, Coert Waagmeester wrote:
The only thing I can currently think of is maybe the kernel config
files in /boot?
I'd say it's more likely to be getting it from /proc/config.gz.
But why start with a clean config each
On 02/23/2012 01:08 PM, Alan McKinnon wrote:
On Thu, 23 Feb 2012 12:48:35 +0200
Coert Waagmeesterlgro...@waagmeester.co.za wrote:
On 02/23/2012 11:17 AM, Neil Bothwick wrote:
On Thu, 23 Feb 2012 10:51:43 +0200, Coert Waagmeester wrote:
The only thing I can currently think of is maybe
Hello all,
Can amd64 distcc compile for a gentoo x86 setup?
Or do I need a 32bit chroot?
Regards,
Coert Waagmeester
Hello all,
Tried to setup LIRC.
I built my own serial receiver for serial, and it works.
I get a /dev/lirc0 and mode2 generates output on keypresses.
Currently I am using a One for All URC 7130
When I run irrecord it takes me through two phases of pressing keys, and
then it asks me for only the
On 05/22/2011 01:36 PM, Mick wrote:
On Saturday 21 May 2011 23:17:30 walt wrote:
On 05/20/2011 04:22 AM, Coert Waagmeester wrote:
On 05/19/2011 04:12 AM, Valmor de Almeida wrote:
Is SystemRescueCd still a good system rescue tool? The web site has not
been updated for over 1 year. Thanks
On 05/19/2011 04:12 AM, Valmor de Almeida wrote:
Hello,
Is SystemRescueCd still a good system rescue tool? The web site has not
been updated for over 1 year. Thanks for other suggestions.
--
Valmor
+1
I use it for all my gentoo installations as well.
Have even removed windows
On 05/14/2011 08:42 AM, Coert Waagmeester wrote:
Hello all,
Building myself a new media center setup.
I used to have an old xbox with xbmc. But the CPU is to slow for hi-def
video.
Now I have a normal PC with keyboard and mouse in its place.
Normal Gentoo install.
How can I get X
Hello all,
Building myself a new media center setup.
I used to have an old xbox with xbmc. But the CPU is to slow for hi-def
video.
Now I have a normal PC with keyboard and mouse in its place.
Normal Gentoo install.
How can I get X to start up without login straight into XBMC?
Which
On 04/23/2011 02:50 AM, Mark Shields wrote:
On Thu, Apr 21, 2011 at 11:41 AM, Dale rdalek1...@gmail.com
mailto:rdalek1...@gmail.com wrote:
Coert Waagmeester wrote:
Hello Dale,
Managed to fix it.
I downloaded a new portage snapshot, extracted it, and used
Hello all,
Since yesterday, when I try to update my gentoo box, certain ebuilds
give me the following error:
Fetching (15 of 22) media-libs/libsdl-1.2.14-r6
!!! Digest verification failed:
!!! /mnt/data/portage/media-libs/libsdl/libsdl-1.2.14-r6.ebuild
!!! Reason: Filesize does not match
On 04/21/2011 08:26 AM, Dale wrote:
Coert Waagmeester wrote:
Hello all,
Since yesterday, when I try to update my gentoo box, certain ebuilds
give me the following error:
Fetching (15 of 22) media-libs/libsdl-1.2.14-r6
!!! Digest verification failed:
!!! /mnt/data/portage
On 03/28/2011 10:35 AM, Mick wrote:
On Monday 28 March 2011 09:11:51 Coert Waagmeester wrote:
Hello all,
Running a box with 2x1TB software raid disks.
A while back I read up about disk write caching and it's pros/cons.
I then decided to disable it on my box.
Edited /etc/conf.d/hdparm
with libvirt, and I would like to know if
anyone else here uses the combination of kvm and libvirt?
What is the most dynamic way of automatically setting up virtual
networks per VM? Should I use qemu-ifup?
I do not use routed or NATted virtual nets. only bridging.
Kind regards,
Coert Waagmeester
a cron job that checks every 10 minutes and turns it
off if it is enabled. But that feels like a somewhat ugly solution...
Kind regards,
Coert Waagmeester
Hello all,
Only just started playing with hardened gentoo.
I have a few normal gentoo amd64 machines already running.
Can I add those to the distcc config for the hardened box?
Or are there indeed special things with the compiler on hardened gentoo?
Regards,
Coert
Hello all,
I am doing a fresh install for a new machine with the help of distcc.
3 64bit machines with one one them having a no-multilib installation.
It is indeed impossible to compile 32bit binaries on that machine.
Does this matter in my amd64 distcc setup?
Or will the job fail, and distcc
Hello all,
Managed to set my self up with an awesome KDE desktop.
there is only one problem that only happens occasionally.
When I queue a few music videos in vlc and it goes from one to next,
only sometimes it comes with an ALSA error:
ALSA version problem:
VLC failed to re-initialize
Enrico Weigelt wrote:
* Coert Waagmeester lgro...@waagmeester.co.za wrote:
My setup is one 32bit pc with gentoo and another 64bit pc with gentoo
I managed to get this going on the 64bit with a 32-bit chroot, distcc,
and crosstools
Why do you need an 32bit chroot if you're going to use
Hello all,
I see the gns3 overlay link is broken
http://code.gns3.net/gns3-overlay/file/ec6bc595d263/gns3-overlay-docs.txt
Do any of you use gns3? what is the recommended way of installing it on
gentoo?
Regards,
Coert Waagmeester
Neil Bothwick wrote:
On Wed, 10 Nov 2010 11:52:08 +0200, Coert Waagmeester wrote:
My bad, I found it after some more googling in the zugaina overlay.
Eix is able to search overlays, installed and otherwise, for packages. In
this case it shows that sunrise has a newer version that zuigana
Coert Waagmeester wrote:
Hello all,
I see the gns3 overlay link is broken
http://code.gns3.net/gns3-overlay/file/ec6bc595d263/gns3-overlay-docs.txt
Do any of you use gns3? what is the recommended way of installing it on
gentoo?
Regards,
Coert Waagmeester
My bad, I found it after some
:
http://www.gentoo.org/proj/en/base/amd64/howtos/index.xml?part=1chap=2
http://www.gentoo.org/doc/en/cross-compiling-distcc.xml
http://www.gentoo.org/doc/en/distcc.xml
http://www.gentoo.org/proj/en/base/embedded/handbook/index.xml?part=1chap=2
Regards,
Coert Waagmeester
and my
own kernel.
Make sure to change that in your /etc/fstab as well.
Dont know if this is always the case though.
Regards,
Coert Waagmeester
dhk wrote:
On 11/08/2010 05:28 AM, Coert Waagmeester wrote:
Volker Armin Hemmann wrote:
On Thursday 04 November 2010, dhk wrote:
I've always used the genkernel, but now am trying to make a manual one.
I think the kernel is alright since all the default setting seemed
reasonable and the build
Hello all,
Just installed ufed. handy.
I see that ufed places local USE flags with global flags in /etc/make.conf
Is this normal/does it matter?
I always set local flags in /etc/portage/package.use as I read in the
Handbook
Regards,
Coert
-amd64-faq.xml#cflags I can make it:
-O2 -march=core2 -pipe
Is this entirely necessary? Will it cause a big improvement?
If I do change, how do I recompile everything? (like --newuse for USE
changes?)
Thank you,
Coert Waagmeester
Gary Golden wrote:
On 11/02/2010 12:08 PM, Daniel Pielmeier wrote:
2010/11/2 Gary Golden m...@garygolden.me:
Hi, list.
I keep changes of my /etc with git and I would like to include
/var/lib/portage/world file into the repository.
Can I safely do:
mv /var/lib/portage/world /etc/portage
ln -s
Hello all,
Still new to gentoo. I use RHEL a lot.
If I want to set up an x86 distcc solution, do the USE flags need to be
the same on all machines?
Trying to setup/compile all desktop apps on one machine with two
assisting in compilation.
Regards,
Coert Waagmeester
31 matches
Mail list logo
