net-wireless/bluez maybe?
Kyle
On Sep 16, 2010 1:01 PM, Hung Dang hungp...@gmail.com wrote:
Hi all,
I need to use hid2hci for my bluetooth keyboad. However, I could not figure
out how to get the hid2hci command.
Any suggestion would be appreciate?
Thanks in advance
Hung
Except for that, only common scannings for phpMyAdmin, myadmin, pma,
mysql, scripts, etc. Nothing more. Any ideas why apache died?
I noticed you have mod_dav mod_cache and are running 2.2.15, perhaps
it's this?
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1452
--
Kyle
Another idea to help with your forensics would be to bring a netstat and
lsof
binary over to your machine and run them to see which actors are running
and
trying to get out. That could help you detect what is running on that
machine
and google your way from there.
If your kernel has
AddHandler cgi-script cgi py
Thanks, Kyle, you've been getting me closer and closer.
If I'm starting to get the new stuff, AddHandler declares certain
extensions. Up until last month, extensions were not required, and in fact
my CGI programs have never had them. It used to be enough to use
Heyo Kevin,
Directory /hex/hexTest/
AuthUserFile /etc/apache2/kosmanor/passwords
AuthGroupFile /dev/null
AuthName OHex Advanced
AuthType Basic
Require valid-user
Options FollowSymLinks
/Directory
Try adding one of these in there:
AddHandler cgi-script cgi pl
--
* Starting apache2 ...
(98)Address already in use: make_sock: could not bind to address
64.166.164.49:80
no listening sockets available, shutting down
Unable to open
logs [
Strace will probably reveal which log file
* Starting apache2 ...
(98)Address already in use: make_sock: could not bind to address
64.166.164.49:80
no listening sockets available, shutting down
Unable to open
logs [ ok
]
Make sure an interface is listening on that
ebuild PATH TO ebuild file unpack
and then look at /var/tmp/portage//work/
but is there a direct way (or how does portage do this)?
I'm not sure how portage does this but the git directory is likely
bare which is why you don't see any branch files. Try: git clone
Ext4 was very new around 2.6.27,. The kenel is likely refusing to
mount the filesystem because the kernel driver is experimental (old)
and the filesystem was created when a different kernel was loaded (non
experimental ext4). Using the old driver could compromise the
integrity so the kernel
Googling sometimes produces hilarious results.
Seriously, I'm looking for any information/brave
hack on using CEPH fs with Gentoo
The two main things you'll have to do is build a kernel with ceph
support and then create an ebuild for ceph's userland utilities and
put it in your own
Googling sometimes produces hilarious results.
Seriously, I'm looking for any information/brave
hack on using CEPH fs with Gentoo
The two main things you'll have to do is build a kernel with ceph
support and then create an ebuild for ceph's userland utilities and
put it in your own
Maybe you need a powered adapter like the one you need for a classic model m?
Can't think of the brand I've seen offhand :/
On 7/12/10, Mick michaelkintz...@gmail.com wrote:
Hi All,
I have connected a conventional PS/2 mouse to a USB socket using this
adaptor:
Most secured - App i C++ or C.
Programs written in c++/c are not inherently secure, the programmer
must make use of best practices using secure functions, etc.
--
Kyle
Iotop is for io and the kernel support is through netlink. Aside
On 7/7/10, James wirel...@tampabay.rr.com wrote:
Jarry mr.jarry at gmail.com writes:
I would like to see in console current network transfer rate
for given interface, similar as I can see cpu-loading in [%]
with top command.
Misfire. Aside from trafshow and iftop you might look at iptraf
On 7/7/10, Kyle Bader kyle.ba...@gmail.com wrote:
Iotop is for io and the kernel support is through netlink. Aside
On 7/7/10, James wirel...@tampabay.rr.com wrote:
Jarry mr.jarry at gmail.com writes:
I would like to see
Since space is a issue for you, you really only need the kernel sources
for the kernel you are using. One could argue that if you have a well
built kernel and don't plan to change it in the future, you could
remove its sources too. I would save a copy of the config tho.
I'd certainly argue
You generally don't have to restart anything. If your still having
trouble can you post the /etc/resolv.conf file so we can take a look?
On 6/19/10, Jarry mr.ja...@gmail.com wrote:
Hi,
I modified /etc/resolv.conf (added opendns-servers in addition
to my own), but I do not know what I should
CONFIG_BRIDGE :)
On 4/8/10, Joseph syscon...@gmail.com wrote:
On 04/08/10 07:40, Fernando Antunes wrote:
On Thu, Apr 8, 2010 at 1:11 AM, Joseph syscon...@gmail.com wrote:
I've activated Network adapter in VirtualBox (running Windows XP) but I
it
is not working. It works only in NAT mode not
I don't know if this is a hardware issue or not, but I thought that maybe I'd
configured my kernel incorrectly
Did this behavior start after a kernel upgrade? If yes, what was the
previous kernel version and what version are you running now?
--
Kyle
Doesn't help right now but it sounds like an expander cable might be loose.
On 3/26/10, Stefan G. Weichinger li...@xunil.at wrote:
Does anyone know this?
I run 2.6.27-gentoo-r8 on a server, amd64 ..
It has 8 hotswap-bays for hdds and lspci says it uses a ---
Intel Corporation
+1 on zfs w/ solaris for storage, just don't go cheap and get desktop disks.
--
Kyle
li...@xunil.at wrote:
Am 11.03.2010 16:54, schrieb Kyle Bader:
If you use the cfq scheduler (linux default) you might try turning off
low latency mode (introduced in 2.6.32):
Echo 0 /sys/class/block/device name/queue/iosched/low_latency
http://kernelnewbies.org/Linux_2_6_32
That sounded
If you use the cfq scheduler (linux default) you might try turning off
low latency mode (introduced in 2.6.32):
Echo 0 /sys/class/block/device name/queue/iosched/low_latency
http://kernelnewbies.org/Linux_2_6_32
On 3/10/10, Stefan G. Weichinger li...@xunil.at wrote:
Recently I see bad
I opted to reinstall from source that machine, which wasn't exactly a
bad choice anyway. But as always, rtfm is good advice! Thanks (not
sarcastic, except to mock myself).
Another option other than rsync or dd is to use tar:
tar cf - $old_dir | ( cd $new_dir: tar xf - )
tar cf - $old_dir |
tar cf - $old_dir | ( cd $new_dir: tar xf - )
tar cf - $old_dir | ssh $other_host ( cd $new_dir: tar xf - )
^
The ':' separating commands should be a ';'. Using the -C option would be
a little easier, but your method also would work for star.
- be aware of cylinder boundaries when partitioning (thanks to the
recent thread)
+1
- utilizing device labels and/or volume labels instead of hoping
/dev/sda stays /dev/sda always
+1
- initrd - I've never used one, but maybe it's needed if root is on
software RAID?
It's not technically
Has anybody any other tips to offer me for this operation?
tar up /etc.
Make sure the tar can extract on another system. Backups that haven't
been tested are not backups! :D
--
Kyle
4KB physical sectors: KNOW WHAT YOU'RE DOING!
Good article by Theodore T'so, might be helpful:
http://thunk.org/tytso/blog/2009/02/20/aligning-filesystems-to-an-ssds-erase-block-size/
--
Kyle
Most of the wait I would assume is due to the size of the volume and
creating parity. If it was my array I'd probably just sit tight and
wait it out.
On 2/1/10, J. Roeleveld jo...@antarean.org wrote:
Hi All,
I am currently installing a new server and am using Linux software raid to
merge 6 *
It would be interesting to know whether hardware RAID would behave any
differently or allow the sync to perform in the background. I have
only 1.5TB in RAID5 across 4 x 500gb drives at present; IIRC the
expansion from 3 x drives took some hours, but I can't recall the
initial setup.
LSI,
This is rather blunt but...
Find / -name *|xargs touch
On 1/25/10, Mark Knecht markkne...@gmail.com wrote:
Hi,
I've just rebuilt my new machine this morning playing with
different ways to do things. Unfortunately I went sort of fast and
forgot to set date/time/timezone. (Doing too much
Is there a way to install a program that runs on Gentoo on a usb stick?
I would like to be able to booted to the usb stick and run the program
in a Gentoo environment? Basically I would like to make a demo disk
with the program and just enough of the OS so it works.
I think the answer lies
Udev rules
On 1/22/10, Mark Knecht markkne...@gmail.com wrote:
Hi,
I've got a new machine with (for now) 2 NICs in it. How do I
configure networking so that the GigaBit NIC is always eth0 and the
100Mb is eth1? Is there a way to link either a driver to a specific
net.ethX name?
Thanks,
Would it be better to create a local hard drive swap and file system for
certain root dir?
Have writable files on local disk and mount them a la mount --bind
/mnt/local/etc /etc. You should make a separate partition for local
swap if you have a local disk.
--
Kyle
Any change in kernel configuration or did you copy your old config and
run make oldconfig?
On 1/4/10, Helmut Jarausch jarau...@igpm.rwth-aachen.de wrote:
Hi,
I've upgraded the kernel on an old machine to 2.6.32.
Now, I cannot get the ZIP drive (ATAPI) working.
There is a /dev/hdd device and
I'm pretty sure chrooting to 64bit from 32 bit kernel won't work, so
you'll have to reboot into a 64 bit environment.
On 12/24/09, Carlos Moyano Cubillos cmcg...@gmail.com wrote:
Dear friends,
I have a gentoo system running 32bit .. and I have a 30GB partition
available on which I would like
James:
How would I go about taking a LiveCD and packing it into a LiveCD so
that I don't have to set up NFS exports for all the other Linux
distributions?
I assume you mean taking a livecd and packing it into a initramfs. I
would suggest you read this guide:
Ps auxr
On 12/18/09, Paul Hartman paul.hartman+gen...@gmail.com wrote:
On Fri, Dec 18, 2009 at 1:38 PM, Florian Philipp
li...@f_philipp.fastmail.net wrote:
Hi list!
My virtual server seems to have a problem and I don't know how to find it.
Today, while trying to create a new postgresql
I'm on the train so its hard to check the man pages but can't you use
udevtrigger or a similar tool so rebooting isn't required?
On 12/17/09, Nikos Chantziaras rea...@arcor.de wrote:
On 12/17/2009 08:42 PM, Denis wrote:
Hello folks,
Quick question.
My main HD is SATA and gets /dev/sda in
Scsi support maybe?
On 12/17/09, Bruce Hill br...@slackwarebox.com wrote:
On Fri, Dec 18, 2009 at 09:14:48AM +0800, Xi Shen wrote:
ok. but it looks like the gmail web client encourage top post ;)
That doesn't make it easy to read. This is how we see it when you top-post:
A: Because you are
Is it rootdelay or scandelay?
On 12/18/09, Robert Bridge rob...@robbieab.com wrote:
Try passing a rootdelay option to the kernel to allow the kernels USB
probe to complete before it tries to mount the USB device.
e.g. kernel /boot/kernel root=/dev/usbhdd rootdelay=30 in grub
--
Sent from
Is it a common thing, or really easy to do, to redirect the content from a
server to another one?
Change dns records/ip addresses?
Like launching an lil app telling the port to listen and then get all data
travelling there??
tcpdump?
--
Kyle
Thanks dale, adding :)
On 11/9/09, Dale rdalek1...@gmail.com wrote:
Rudmer van Dijk wrote:
Hi,
for all who have problems with their jdk (and don't want to spent half an
hour
finding out why 8-):
after sync, portage wants to install dev-java/icedtea6-bin, although there
is
a jdk
And iirc you can got ext3 - ext2. The same does not hold true for
ext4 - ext3.
On 10/30/09, walt w41...@gmail.com wrote:
On 10/30/2009 10:26 AM, Stroller wrote:
On 30 Oct 2009, at 17:04, Maxim Wexler wrote:
...
Yes I know, ext2 is rather retro, but I was
persuaded to use it by reading the
Avoiding 1, 2, and 3 but thought I'd propose a 4 other than a virtual
machine. Ask the vendor if they can provide a statically compiled
version, that way you don't have to worry about libc. I dunno how
flexible the vendor is but its worth asking :)
On 10/30/09, Duncan Smith
Output from rc-update show ?
On 10/4/09, Mick michaelkintz...@gmail.com wrote:
It must be a year or so now with all different kernels. On boot up kdm
fires
up, but within 5 seconds or so and while the use is busy entering their
passwd on the kdm screen, it suddenly returns to the console.
Apache2, mod_ssl, self signed certificate, htaccess/htpassword via
digest. Done deal :)
On 10/5/09, David Juhl commo_p...@yahoo.com wrote:
I am trying to find away to access files securely from my home computer.
The network I am on is really strict on email attachments and no usb
drives are
Use a MAILTO= in your crontab and notifications will go to any address
you want, leave MAILTO blank and it won't mail at all.
On 9/27/09, Walter Dnes waltd...@waltdnes.org wrote:
On Sun, Sep 27, 2009 at 08:55:42AM +0100, Mick wrote
To complete the diagnosis we may need the version of your
1. Put your host into dyndns and ssh to that name
I'll often do this and then create a subdomain of a domain I own then have
it CNAME to the dyndns domain name. I find that I have a easier time
remembering the names I choose this way.
--
Kyle
Excuse the top post - bb email. You might be able to change the hdd boot
priority in another menu to try usb hdd first then fallback on sata/ide
whatever. Also you might have to add a slowusb kernel boot param if after the
kernel boots you get a unable to sync vfs error when handing off to
I'm about to sign up for a new remote dedicated system and I'm
wondering if I should spring for the 100mbps or 1000mbps uplink
upgrades from 10mbps? Is there a test I can run to find out? I'm
running a lightweight website with maybe 300-400 visitors/day.
I wouldn't think 10mbps would be a
Get killed.
--Original Message--
From: Martin Schrodi
Sender: AGDA
To: gentoo-user
ReplyTo: gentoo-user@lists.gentoo.org
Sent: Apr 28, 2009 3:17 AM
Subject: [gentoo-user] AUTO: Martin Schrodi ist außer Haus.
Ich werde ab 28.04.2009 nicht im Büro sein. Ich kehre zurück am
29.04.2009.
Sorry for top posting my bb is dumb about that. The answer to your question is
yes, you can uses your current pots lines. You want your outside line to be
fxo and lines connecting to your standard phones to be fxs. The digium
wildcard supports 4 pots and you can buy them with a different mix
It is a great book, I used it to help me setup my first voip box. Here's that
link:
http://www.asteriskdocs.org/
Sent via BlackBerry from T-Mobile
-Original Message-
From: John covici cov...@ccs.covici.com
Date: Wed, 22 Apr 2009 16:11:18
To: gentoo-user@lists.gentoo.org
Subject:
Your welcome, also I seem to remember there being a caveat to running asterisk
in a vserver (if your host uses that technology) but its not coming to mind.
Maybe when I'm home infront of a real computer I can find it. Also I really
liked the voiper soft phone, its not in the tree but might
I'm unsure if lilo supports booting by filesystem label/uuid but that's what I
do with grub. Might be woth looking into
Sent via BlackBerry from T-Mobile
-Original Message-
From: Thomas Chef thomas.c...@gmail.com
Date: Thu, 16 Apr 2009 12:07:08
To: gentoo-user@lists.gentoo.org
Does portage use wget over http by default? Can I change a setting to
make it use ftp?
Use a ftp:// mirror ?
(correct me if I'm wrong)
-Kyle
You could use iptables to block all traffic headed to port 80 with
exceptions for the domains you need.
--
kyle.ba...@gmail.com
This is a great method that I utilize:
http://www.mikerubel.org/computers/rsync_snapshots/
On Wed, Dec 17, 2008 at 9:02 AM, Momesso Andrea momesso.and...@gmail.comwrote:
I run on an old laptop a website (Joomla + MediaWiki + Moodle + a couple
of other things).
The site now is offline and
Its a tigon 3 broadcom nic if that helps, I can get the .config line once I
beat traffic
Sent via BlackBerry from T-Mobile
-Original Message-
From: Harry Putnam [EMAIL PROTECTED]
Date: Wed, 10 Dec 2008 14:56:30
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] How to tie
My guess is tha while inside the initrd a kenrel module was loaded and it was
something that you needed to read the boot volume. Are you statically or
modulely including your sata drivers?
Sent via BlackBerry from T-Mobile
-Original Message-
From: Harry Putnam [EMAIL PROTECTED]
You probably need scsi and scsi disk support compiled in as well. Everything
associated with accessing the device and the filesystem it contains has to be
compiled in to the kernel and not be a module. The initrd is loaded into
memory and loads the kernel modules (the ones you need to
Go areca, I have a coworker that raves about his. At my shop we have dozens of
systems using 3ware and they have horrible preformance.
--Original Message--
From: Pintér Tibor
To: gentoo-user@lists.gentoo.org
ReplyTo: gentoo-user@lists.gentoo.org
Sent: Oct 15, 2008 6:41 AM
Subject: Re:
63 matches
Mail list logo
