Hello everyone,
I'm thinking about using Gentoo as a NAS serve. I know there are some NAS
distributions like FreeNAS that are claimed to be rock solid, but FreeNAS
support for GPU and other things sounds poor to me.
Said that, what could be the effort to turn my Gentoo in a NAS service,
setting u
>>On Wed, Jan 20, 2021 at 5:57 AM bobwxc wrote:
> >>在 2021/1/20 上午8:04, Raphael MD 写道:
> >>
> >> Hello folks!
> >>
> >>
> >> What could be the best approach to a small home server with a 20’s
> >> core Xeon and 32GB of ram?
Hello folks!
What could be the best approach to a small home server with a 20’s core
Xeon and 32GB of ram?
I'm thinking of serving a NAS, a virtual machine to record 2 cameras with
ZoneMider and a DB server/php.
Some configurations I'm guessing are described below.
1) Install FreeNAS, form
Hello everyone,
I’ve booted my system with a gentoo live cd, just to figure out my system
drivers and modules to configure the kernel, because it’s difficult to
realize what drive my intel Ethernet card uses and many others.
Are there some command to extract that list to configure the kernel?
I
I’ve been noted that Systemd is putting hard dependency in things like
Bluetooth, today is difficult rely upon a system without Bluetooth.
Anyone know some systemd manual to quickly put a system to run?
I was guessing could be easy install a systemd, but I’m realizing that
isn’t.
Thanks
--
M.S.
Hello,
I’ve been realizing to update Gentoo is becoming worse every time. My 2018
install, that I’ve recently update because python, was still those days
running like a square wheel.
I was trying to update my KDE profile 17, but was a pain, I’ve suffered a
lot, many blocks, flag problems, circula
On Fri, 1 May 2020 at 18:49 J. Roeleveld wrote:
> On 1 May 2020 21:50:02 CEST, Raphael MD wrote:
> >Hello!
> >
> >Could I turn my Linux swap off.
> >I have 32 GB of RAM memory, I suppose my system don’t need swap,
> >because
> >I’vea lot of RAM, is thi
Hello!
Could I turn my Linux swap off.
I have 32 GB of RAM memory, I suppose my system don’t need swap, because
I’vea lot of RAM, is this true?
Thanks
--
M.S. Raphael Mejias Dias
Nuclear Engineer | Reactors
Secure e-mail: raphael.mejias.d...@protonmail.com
PGP Key for raph...@gmail.com:
https:
Mick 3:41 PM
(...)
>I don't know if your error is related to the gcc version you're using.
Better
>switch to 9.2 and try again.
I've updated GCC to 9.2 and this has solved my problem.
Thanks!
Hello,
I'm trying to update KDE, but the emerge is stopping at qtwebengine-5.12.5
compile process.
Here is the compile log.
https://pastebin.com/wKbJuAAS
dmesg
http://dpaste.com/27D5XHK
emerge --info
http://dpaste.com/2VKVS57
Many Thanks
M.S. Raphael Mejias Dias
Nuclear Engineer | Reactors
Hi,
Emerge is asking to update glibc because old is masked and it'll be removed.
But, how to update glibc?
Gentoo only talk about to update gcc, but my gcc it's up to date.
Thanks
Hi!
After a system update, my printer only print documents from internet like
sites.
When a send .pdf to print, cups return this error: No Pages Found.
Did anyone see this error?
Thanks
On Jul 22, 2017 22:06, "Rich Freeman" wrote:
>
> On Sat, Jul 22, 2017 at 8:43 PM, Raphael MD wrote:
> >
> > KDE Appear to be a nightmare, because every 'emerge --sync' I do to
solve
> > other problems, if KDE base has an updated version issued, and yo
Hi,
KDE Appear to be a nightmare, because every 'emerge --sync' I do to solve
other problems, if KDE base has an updated version issued, and you,
acidentaly, need to install any other KDE packages that you don't have
installed yet, you suffer with a lot of dependency updates problems.
De fato, yo
>Ühel kenal päeval, T, 18.07.2017 kell 17:54, kirjutas Raphael MD:
>On Tue, Jul 18, 2017 at 12:40 AM, Mart Raudsepp
> wrote:
> Please also give a try to USE=native-headset on pulseaudio, I think
> that USE flag setup (packaging-wise) might be a bit suboptimal if that
> makes it
>
On Tue, Jul 18, 2017 at 12:40 AM, Mart Raudsepp wrote:
>
Ühel kenal päeval, E, 17.07.2017 kell 12:10, kirjutas Raphael MD:
>
emerge --info pulseaudio please? Especially the "was built with the
>
following USE flags" part
Here is: https://pastebin.com/64Rbb9t0
On Mon, Jul 17, 2017 at 7:21 PM, Mick wrote:
> On Monday 17 Jul 2017 18:23:02 Raphael MD wrote:
> >
> > I've used Bluedevil under KDE.
> >
> >
> >
> > My headphone is correctly paired, both headphone and PC are connected.
> >
> >
I've used Bluedevil under KDE.
My headphone is correctly paired, both headphone and PC are connected.
But I do not have any sound through headphone.
I've read some Arch forums and they tell about PulseAudio 10 bug, when
Pavucontrol does not detect A2DP sink profile.
The problem is the solution
Hi everyone,
I'm suffering a lot to put sound on my Bluetooth's head phone.
The Bluez5 recognize my bt device.
The pulseaudio is working normally, but A2DP protocol do not appear in
pavucontrol options.
I've followed the gentoo wiki, and looked at arch wiki to.
Anyone have a path to this be dif
Hi,
I've installed kde 5 on my laptop, who have us keyboard.
My Gentoo was installed with pt-BR and en-US L10N and locale.
Despite that fact that I'm running a English system, I need to write in
Portuguese.
The problem is, when I type ~+a, my system writes ~a and not my desired
chapter ã, the s
Thank you all, for the help until now.
I didn't solve my problem yet, but I realised some troubles and mistakes
that I've being made.
First I'll divide those problematic situations I've suffered:
1.I was using Genkernel to configure and build the kernel, but Genkernel’s
menuconfig doesn’t work l
On May 29, 2017 14:51, "Kai Krakow" wrote:
>
> Am Mon, 29 May 2017 08:09:02 -0300
> schrieb Raphael MD :
>
> > I'm trying to install Gentoo in my notebook, but kernel, during the
> > boot, do not find the root partition.
> >
> > I'm u
I'm trying to install Gentoo in my notebook, but kernel, during the boot,
do not find the root partition.
I'm using UEFI boot, I've tried Genkernel, I've checked XFS's support in
kernel's menuconfig and re-cheked GRUB config files, but is a pain, do not
work.
I've installed Funtoo with Debian Ker
Hi,
I've a question about using SATA's SSD over the SAS controller on the
workstation motherboards.
I didn't find any benchmark comparing the CPU/Memory load, for example.
I suppose, that installing a SSD over the SAS controller, my CPU/Memory
load will be lower and I will get better performance
As you talking about KDE 5, tell me something, nowadays is a good moment to
migrate from KDE 4?
I only use mplayer, firefox, wine and simple diary apps.
Is it a reliable choice to migrate?
As you talking about KDE 5, tell me something, nowadays is a good moment to
migrate from KDE 4?
I only use mplayer, firefox, wine and simple diary apps.
Is it a reliable choice to migrate?
Hello.
I've tried to install a Brother DCP-L8400CDN network laser printer on my
Gentoo.
I've followed Gentoo Wiki instructions and have used official Brother's
driver.
The CUPS works fine with my other printer one old HP 2600N, but when I send
any doc to Brother, the printer prints a blank page
27 matches
Mail list logo