[gentoo-user] Problem with ARTEC T1
Hi, when I try to scan channels with dvbscan I get the following : localhost nico # dvbscan fr-Paris scanning fr-Paris using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 47400 0 2 9 3 1 0 0 initial transponder 49800 0 2 9 3 1 0 0 initial transponder 52200 0 2 9 3 1 0 0 initial transponder 56200 0 2 9 3 1 0 0 initial transponder 58600 0 3 9 3 1 2 0 tune to: 47400:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: tuning failed!!! . . . . . . . . . ERROR: initial tuning failed dumping lists (0 services) Done. And here is the output of dmesg when I plug the box : dvb-usb: found a 'Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dibusb-an2235-01.fw' usbcore: registered new driver dvb_usb_dibusb_mb usb 4-1: USB disconnect, address 2 dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. usb 4-1: new full speed USB device using uhci_hcd and address 3 usb 4-1: configuration #1 chosen from 1 choice dvb-usb: found a 'DiBcom USB1.1 DVB-T reference design (MOD3000)' in warm state.dvb-usb: will use the device's hardware PID filter (table count: 16). DVB: registering new adapter (DiBcom USB1.1 DVB-T reference design (MOD3000)). DVB: registering frontend 0 (DiBcom 3000M-B DVB-T)... dibusb: This device has the Thomson Cable onboard. Which is default. input: IR-receiver inside an USB DVB receiver as /class/input/input4 dvb-usb: schedule remote query interval to 150 msecs. dvb-usb: DiBcom USB1.1 DVB-T reference design (MOD3000) successfully initialized and connected. All were all right where the older versions of the kernel (2.6.15), now I'm in 2.6.18-r4. My configuration is the following : Linux localhost 2.6.18-gentoo-r4 #1 SMP Thu Dec 7 22:38:23 CET 2006 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GenuineIntel GNU/Linux I've search on the web but found nothing working. Thanks for your replies. -- Nicolas MARTIN
Re: [gentoo-user] Oracle DB question
Maybe this http://csee.wvu.edu/~ccole/oracle10g-ubuntu.html but you have to adapt it for Gentoo (just a few differences I think). On 4/21/06, pat [EMAIL PROTECTED] wrote: Hi,I want to ask if there's possible to install Oracle DB (9 and higher) onGentoo and if there's a tutorial/howto how to do it.Thanks Pat--gentoo-user@gentoo.org mailing list-- Martin Nicolas Master 2 I2A
Re: [gentoo-user] One host, two NIC's...
Hi Jeff, I think you should try to adjust your /etc/hosts and put in it :192.168.0.39 192.168.1.139 fooYou may also need to adjust your routes : [EMAIL PROTECTED] add default gw 192.168.0.X 192.168.0.39[EMAIL PROTECTED] add default gw 192.168.1.X 192.168.1.139 On 2/5/06, Jeff [EMAIL PROTECTED] wrote: Hey all. Linux question - I have this nice big dual Xeon server, withtwo NIC's. Where, how, when, why, can I configure this beast, not as arouter, but just as a host with two ways to get in.eth0 is 192.168.0.39eth1 is 192.168.1.139I would like to be able to associate both NIC's to the same hostname,'foo' - how is this accomplished?Thanks much!-- gentoo-user@gentoo.org mailing list-- Martin Nicolas Master 2 I2A
Re: [gentoo-user] ipw2200 dmesg error
Maybe you should have a look at : http://bughost.org/bugzilla/show_bug.cgi?id=697http://gentoo-wiki.com/HARDWARE_ipw2200 On 1/15/06, Matthias Bethke [EMAIL PROTECTED] wrote: Hi Rafael,on Sunday, 2006-01-15 at 16:45:29, you wrote: Sorry I did a dmesg and that message shows for me too... but less times [EMAIL PROTECTED] ~ $ dmesg | grep ipw2200 ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.10 ipw2200: Copyright(c) 2003-2005 Intel Corporation ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200: Unknown notification: subtype=40,flags=0xa0,size=40 ipw2200: Firmware error detected.Restarting. I have the same, though I never even noticed. The card works just fine.BTW, Rafael, if you uploaded your key to the keyserver network, signingyour mail would even make sense :)regardsMatthias ipw2200: Sysfs 'error' log captured. ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log already exists. Bye, Rafael Fernández López. -- gentoo-user@gentoo.org mailing list--I prefer encrypted and signed messages. KeyID: FAC37665Fingerprint: 8C16 3F0A A6FC DF0D 19B08DEF 48D9 1700 FAC3 7665 -- Dans la vie il n'y a que 10 sortes de personnesCelles qui comprennent le binaire et les autres.Martin Nicolas Master 2 I2A
Re: [gentoo-user] Re: ipw2200 dmesg error
I've had the same a few ago but I've followed the recommandation of disabled the hwcrypto and now it's ok !to disable hwcrypto follow this link : http://gentoo-wiki.com/HARDWARE_ipw2200#Trouble_with_WPA_and_hwcrypto On 1/15/06, Sven Köhler [EMAIL PROTECTED] wrote: ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log captured. ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log already exists. ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log already exists. ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log already exists. ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log already exists. ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log already exists. ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log already exists. ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log already exists. ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log already exists. ipw2200: Firmware error detected.Restarting. ipw2200: Sysfs 'error' log already exists. Is this a known issue of these drivers? I have the same errors. I use ipw2200-1.0.10 with kernel 2.6.15.The connections breaks, the card is resseting and then the card worksagain. Then connection breaks again, the cards resets again - and so on ... So there is no continuous connection :-(That's not what i call working.-- Dans la vie il n'y a que 10 sortes de personnesCelles qui comprennent le binaire et les autres.Martin Nicolas Master 2 I2A
Re: [gentoo-user] asterisk_nice -5
Hi.
There is a configuration file for this script in /etc/conf.d/ ?
Maybe in this file there is a vrarible that specify the value of ASTERISK_NICEOn 8/5/05, Joseph [EMAIL PROTECTED]
wrote:Can any body give am a helping hand how to modify asterisk startup
script to start it with let say nice -5I think I'll need to modify something in the beginning in this section,but I don't exactly know how.depend() {need netuse zaptel}start() {
local OPTS USER GROUPif [[ -n ${ASTERISK_NICE} ]]; thenif
[[ ${ASTERISK_NICE} -ge -20 ]] \
[[ ${ASTERISK_NICE} -le19 ]]; thenOPTS=--nicelevel
${ASTERISK_NICE}elseeerror
Nice value must be between -20 and 19fiAsterisk run at the same nice level 0 as apache and when the fax comesin sometimes I get a lot of bad lines.So, adjusting nice level to -5 for asterisk might help.
Asterisk intercept faxes and forwards it to a fax extension.--#Joseph--gentoo-user@gentoo.org mailing list
-- Nicolas
Re: [gentoo-user] Programs executed as root cannot connect to X server
Are you using su for beeing root ? In that case have a look at sux (which permit to give access to x for root in sudo mode).On 5/9/05, Sami Samhuri [EMAIL PROTECTED] wrote:* On Sun May-08-2005 at 09:14:15 PM -0500, Hareesh Nagarajan said: Hi All: How do I enable programs which are executed by the root to connect to the X server?I think you might be looking for this command (normal user):% xhost +localhost For more info read 'man xhost'.--Sami Samhuri-- Nicolas
