Re: [gentoo-user] how to enable glx
On Friday 10 March 2006 03:16, [EMAIL PROTECTED] wrote: I enabled the glx, but it seems the speed is still slow. $ glxinfo | grep rendering direct rendering: Yes The output of glxgears is about 130 FPS. I use intel_agp. As I have stated before I get around 230 FPS when [EMAIL PROTECTED] is running and it jumps to around 1300 FPS when I stop [EMAIL PROTECTED] Nothing else changed. This is an Radeon 9000 Mobility. Make sure you have nothing else running and see if that makes a difference. ~ $ glxgears 1001 frames in 5.0 seconds = 200.200 FPS 1136 frames in 5.0 seconds = 227.200 FPS 1186 frames in 5.0 seconds = 237.200 FPS 1149 frames in 5.0 seconds = 229.800 FPS 1185 frames in 5.0 seconds = 237.000 FPS ~ $ sudo /etc/init.d/foldingathome stop * Stopping [EMAIL PROTECTED] on CPU 1 ... [ ok ] ~ $ glxgears 6299 frames in 5.0 seconds = 1259.800 FPS 6744 frames in 5.0 seconds = 1348.800 FPS 6941 frames in 5.0 seconds = 1388.200 FPS 6897 frames in 5.0 seconds = 1379.400 FPS 6801 frames in 5.0 seconds = 1360.200 FPS -- Bo Andresen -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to enable glx
[EMAIL PROTECTED] wrote: I enabled the glx, but it seems the speed is still slow. $ glxinfo | grep rendering direct rendering: Yes The output of glxgears is about 130 FPS. I use intel_agp. Yes, it's not a particularly powerful card. Since direct rendering is now enabled, that's about as good as it'll get until such time as the drivers improve significantly. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to enable glx
As I have stated before I get around 230 FPS when [EMAIL PROTECTED] is running and it jumps to around 1300 FPS when I stop [EMAIL PROTECTED] Nothing else changed. This is an Radeon 9000 Mobility. Make sure you have nothing else running and see if that makes a difference. The Rage card he's using is far less powerful than any Radeon - not surprisingly, considering that when it was current there *were* no Radeons yet. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to enable glx
I enabled the glx, but it seems the speed is still slow. $ glxinfo | grep rendering direct rendering: Yes The output of glxgears is about 130 FPS. I use intel_agp. $ lsmod mach64 54144 1 drm75672 2 mach64 intel_agp 23324 1 agpgart35016 2 drm,intel_agp $ lspci 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 00:04.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12) 00:06.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 09) 00:06.1 Serial controller: Xircom Unknown device 00d3 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) 00:0c.0 CardBus bridge: Texas Instruments PCI1420 00:0c.1 CardBus bridge: Texas Instruments PCI1420 00:0d.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 Host Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) Did I do it right? -- Wang ShaoChun(王绍春) [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to enable glx
On 3/9/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: I enabled the glx, but it seems the speed is still slow. $ glxinfo | grep rendering direct rendering: Yes The output of glxgears is about 130 FPS. I use intel_agp. $ lsmod mach64 54144 1 drm75672 2 mach64 intel_agp 23324 1 agpgart35016 2 drm,intel_agp $ lspci 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 00:04.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12) 00:06.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 09) 00:06.1 Serial controller: Xircom Unknown device 00d3 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) 00:0c.0 CardBus bridge: Texas Instruments PCI1420 00:0c.1 CardBus bridge: Texas Instruments PCI1420 00:0d.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 Host Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) Did I do it right? You won't get much from this card, the drivers are there but do not give a good result, my radeon gives me 300fps and its a 4x AGP, so I guess yours is kinda correct, there are tips over the net to get more FPS, even a gentoo specific: http://www.gentoo.org/doc/en/dri-howto.xml Check it out... -- Wang ShaoChun(王绍春) [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list -- Daniel da Veiga Computer Operator - RS - Brazil -BEGIN GEEK CODE BLOCK- Version: 3.1 GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V- PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++ --END GEEK CODE BLOCK-- -- gentoo-user@gentoo.org mailing list
[gentoo-user] how to enable glx
I can't enable glx on my video card, the following is output of lspci in my system: 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) My kerenl is linux-2.6.15-suspend2-r6. Any hints about it? Best Regards! -- Wang ShaoChun(王绍春) [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to enable glx
[EMAIL PROTECTED] wrote: I can't enable glx on my video card, the following is output of lspci in my system: 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) My kerenl is linux-2.6.15-suspend2-r6. Any hints about it? Best Regards! I had that card in my old Compaq laptop. You'll need an experimental driver from http://dri.sourceforge.net. HTH. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to enable glx
On Wed, Mar 08, 2006 at 06:19:40PM -0800, Ryan Tandy wrote: [EMAIL PROTECTED] wrote: I can't enable glx on my video card, the following is output of lspci in my system: 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) My kerenl is linux-2.6.15-suspend2-r6. Any hints about it? Best Regards! I had that card in my old Compaq laptop. You'll need an experimental driver from http://dri.sourceforge.net. HTH. -- gentoo-user@gentoo.org mailing list What driver? -- Wang ShaoChun(王绍春) [EMAIL PROTECTED] PH.D Candidate Laboratory of Computer Science, Institute of Software Chinese Academy of Science -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to enable glx
[EMAIL PROTECTED] wrote: On Wed, Mar 08, 2006 at 06:19:40PM -0800, Ryan Tandy wrote: [EMAIL PROTECTED] wrote: I can't enable glx on my video card, the following is output of lspci in my system: 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) My kerenl is linux-2.6.15-suspend2-r6. Any hints about it? Best Regards! I had that card in my old Compaq laptop. You'll need an experimental driver from http://dri.sourceforge.net. HTH. -- gentoo-user@gentoo.org mailing list What driver? The latest mach64 driver from http://dri.freedesktop.org/snapshots/ as well as the 'common' package which includes a script to build and install the module for you. The driver requires DRM support in your kernel. -- gentoo-user@gentoo.org mailing list
