On Fri, 2007-07-27 at 08:45 -0500, Albert Hopkins wrote:
On Fri, 2007-07-27 at 14:54 +0200, Jules Colding wrote:
Hi,
I have an ebuild (see below) for a small keyring daemon. I would like
to
kill the daemon process, if it is running, whenever it is emerged
again
to ensure
Hi,
I have an ebuild (see below) for a small keyring daemon. I would like to
kill the daemon process, if it is running, whenever it is emerged again
to ensure that no running daemon process refers to an old install.
Is there a clean and recommended way of doing this in an ebuild or
should I just
Hi,
I'm seeing crap being added to site-gentoo.el whenever it is being
touched by an emerge. My current site-gentoo.el look like:
snip
;;; cedet site-lisp configuration
(load /usr/share/emacs/site-lisp/cedet/common/cedet)
;; If you wish to customize CEDET, you will need to follow the
;;
On Tue, 2007-07-31 at 15:44 +0200, Jules Colding wrote:
Hi,
I'm seeing crap being added to site-gentoo.el whenever it is being
touched by an emerge.
I experimented a bit. I un-merged subversion and removed any lingering
site-gentoo.el crap. I verified that everything was OK and did:
USE
On Wed, 2007-08-01 at 17:41 +0200, Jan Seeger wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Just add 'dev-util/subversion -emacs' to /etc/portage/package.use. That way,
Subversion is installed without emacs support. To get fancy and only disable
the
emacs flag for one version, try
On Thu, 2007-08-02 at 11:02 +0200, Jules Colding wrote:
On Wed, 2007-08-01 at 17:41 +0200, Jan Seeger wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Just add 'dev-util/subversion -emacs' to /etc/portage/package.use. That way,
Subversion is installed without emacs support. To get
On Fri, 2007-10-19 at 11:58 +0200, Bo Ørsted Andresen wrote:
On Friday 19 October 2007 11:22:00 Jules Colding wrote:
I'm trying to emerge memoir but it is blocking its own dependency -
tetex:
##
omc-2 ~ # emerge -va dev-tex/memoir
Hi,
I'm trying to emerge memoir but it is blocking its own dependency -
tetex:
##
omc-2 ~ # emerge -va dev-tex/memoir
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N]
Hi,
My /etc/conf.d/net says:
config_eth0=( dhcp )
fallback_eth0=( 192.168.3.3/24 )
fallback_route_eth0=( default via 192.168.3.1 )
But dhcpcd is ignoring this. Instead it is using
/var/lib/dhcpcd/dhcpcd-eth0.info to set eth0. This looks like the '-E'
option is used, but where? How can I make
Hi Iain,.
On Sat, 2007-10-27 at 21:58 +0930, Iain Buchanan wrote:
On Sat, 2007-10-27 at 13:48 +0200, Jules Colding wrote:
Hi,
My /etc/conf.d/net says:
config_eth0=( dhcp )
fallback_eth0=( 192.168.3.3/24 )
fallback_route_eth0=( default via 192.168.3.1 )
But dhcpcd
Hi,
I've emerged bugzilla-2.22.3(*) on a hardened box(**). The problem is
that while bugzilla can send password reminder mails it doesn't send any
other mails. Changing a bug or adding a new one does not result in a
mail to the default assignee.
Any ideas?
Thanks,
jules
(*)
On Mon, 2007-11-26 at 12:54 -0600, Dan Farrell wrote:
On Sun, 25 Nov 2007 16:07:54 +0100
Jules Colding [EMAIL PROTECTED] wrote:
Hi,
I've emerged bugzilla-2.22.3(*) on a hardened box(**). The problem is
that while bugzilla can send password reminder mails it doesn't send
any other
Hi
I'm trying to configure my postfix server to use TLS, which should be
quite straightforward according to the different guides I have found
using Google.
When I telnet into my postfix installation I get this:
# telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.
Escape character
Hi,
My daily update has run into a blocking package. How do I best resolve
this?
Thanks,
jules
snip ##
omc-2 ~ # emerge -vauDN world
These are the packages that I would merge, in order:
Calculating world dependencies ...done!
[blocks B ]
On Thu, 2005-12-22 at 11:51 +0200, Ryan Viljoen wrote:
On 12/22/05, Jules Colding [EMAIL PROTECTED] wrote:
Hi,
My daily update has run into a blocking package. How do I best resolve
this?
Thanks,
jules
Hey Jules
emerge -C openmotif
and then do you emerge world
Hi,
Todays sync brought me a new openssh but a required library is missing.
My emerge gives this:
###
snip
checking whether system supports SO_PEERCRED getsockopt... yes
checking if openpty correctly handles controlling tty... no
checking whether getpgrp requires zero
Hi,
I can not find any mirror with a pentium4 stage1 file. Does anyone know
of one?
Thanks,
jules
--
Jules Colding
PGP Public Key: 6266E7B7
--
gentoo-user@gentoo.org mailing list
On Wed, 2005-06-01 at 12:10 +0200, Jules Colding wrote:
Hi,
I can not find any mirror with a pentium4 stage1 file. Does anyone know
of one?
Hmm, it occurred to me that the above didn't make any sense. I should
just use the x86 stage1 file right?
--
jules
--
Jules Colding
PGP Public
.
!!! Function econf, Line 485, Exitcode 0
!!! econf failed
!!! If you need support, post the topmost build error, NOT this status message.
--
Jules Colding
PGP Public Key: 6266E7B7
--
gentoo-user@gentoo.org mailing list
On Fri, 2005-06-03 at 13:49 +0200, Remy Blank wrote:
Jules Colding wrote:
USE=-qt -kde gtk2 gtkhtml gnome hal cdr unicode bzip2 doc emacs examples
tetex
Everything went well until dialog was to be emerged. The output is
below. The error went away when ncurses was emerged manually
world dependencies ...done!
[blocks B ] =x11-themes/gnome-themes-2.8.2 (is blocking
x11-themes/gtk-engines-2.6.3)
[blocks B ] app-admin/gnome-system-tools-1.1.91 (is blocking
app-admin/system-tools-backends-1.2.0)
###
Thanks,
jules
--
Jules Colding
PGP Public Key
On Mon, 2005-06-06 at 13:13 +0200, Jules Colding wrote:
--- ACCESS VIOLATION SUMMARY
---
LOG FILE = /tmp/sandbox-mail-client_-_evolution-2.2.1.1-9278.log
open_wr: /var/lib/scrollkeeper/scrollkeeper_docs
open_wr: /var/lib/scrollkeeper
On Mon, 2005-06-06 at 13:38 +0200, Jules Colding wrote:
On Mon, 2005-06-06 at 13:13 +0200, Jules Colding wrote:
--- ACCESS VIOLATION SUMMARY
---
LOG FILE = /tmp/sandbox-mail-client_-_evolution-2.2.1.1-9278.log
open_wr: /var/lib
On Mon, 2005-06-06 at 13:47 +0200, Jules Colding wrote:
On Mon, 2005-06-06 at 12:38 +0100, Peter Ruskin wrote:
FEATURES=-sandbox emerge scrollkeeper
Thanks a lot, you just saved my day! Could you please tell me what
sandbox is?
RTFM: http://bugday.gentoo.org/sandbox.html
--
Jules
On Mon, 2005-06-06 at 13:47 +0200, Jules Colding wrote:
On Mon, 2005-06-06 at 12:38 +0100, Peter Ruskin wrote:
FEATURES=-sandbox emerge scrollkeeper
Thanks a lot, you just saved my day! Could you please tell me what
sandbox is?
Unfortunately I have to retract that. I am still getting
On Mon, 2005-06-06 at 14:13 +0200, Jules Colding wrote:
#
scrollkeeper-update -p /var/lib/scrollkeeper -
o /var/tmp/portage/evolution-2.2.1.1/image//usr/share/omf/evolution
ACCESS DENIED open_wr: /var/lib/scrollkeeper/scrollkeeper_docs
ACCESS DENIED open_wr: /var/lib
in the FEATURES line, so
shouldn't this be effective already?
--
jules
--
Jules Colding
PGP Public Key: 6266E7B7
--
gentoo-user@gentoo.org mailing list
On Mon, 2005-06-06 at 08:51 -0700, Zac Medico wrote:
--- Jules Colding [EMAIL PROTECTED] wrote:
On Mon, 2005-06-06 at 14:54 +0100, Peter Ruskin
wrote:
These sandbox violations happen all too
frequently. You should
raise a bug report at http://bugs.gentoo.org. For
the time
/ebuild.sh: line 716: 'groupadd': command not found.
Can I emerge a package with groupadd and continue with my installation
or should some portage script be fixed first?
Thanks,
jules
--
Jules Colding
PGP Public Key: 6266E7B7
--
gentoo-user@gentoo.org mailing list
On Wed, 2005-06-08 at 09:42 +0200, Jules Colding wrote:
Hi,
I just redid my stage1 install. Everything went normal until I got to
the emerge --emptytree world part in the handbook (section 6.d). The
emerge failed when dbus-0.23-rc3 was installed. The ebuild tried to add
the group
On Wed, 2005-06-08 at 11:10 +0200, Jules Colding wrote:
On Wed, 2005-06-08 at 01:35 -0700, Zac Medico wrote:
/usr/lib/portage/bin/ebuild.sh: line 716:
'groupadd': command not found.
Can I emerge a package with groupadd and continue
with my installation
or should some portage
is that libncurses is indeed build at this stage, but
without unicode support. I assume emerge --oneshot ncurses will fix
it, but ncurses should really have been build with unicode support from
the start.
Best regards,
jules
--
Jules Colding
PGP Public Key: 6266E7B7
--
gentoo-user@gentoo.org
On Thu, 2005-06-09 at 08:17 +0200, Jules Colding wrote:
My USE statement includes 'unicode' but the build of dialog-1.0.20050206
failed due to a missing libncursesw library.
The problem is that libncurses is indeed build at this stage, but
without unicode support. I assume emerge --oneshot
build my own stages
with catalyst).
;-) Thanks
Anyways, try USE=-gpm emerge --oneshot ncurses and
that should work around the problem. Note that
emerge --info shows USE=gpm in the profile so you
need to disable it.
Why is gpm a problem here?
Thanks a lot,
jules
--
Jules Colding
PGP
!!! If you need support, post the topmost build error, NOT this status message.
##
Any ideas?
jules
--
Jules Colding
PGP Public Key: 6266E7B7
--
gentoo-user@gentoo.org mailing list
. This seems to
indicate that I only need to re-configure VMware. A complete re-emerge
should not be needed.
Am I correct here?
Thanks,
jules
--
Jules Colding
PGP Public Key: 6266E7B7
--
gentoo-user@gentoo.org mailing list
Hi,
I am now getting:
Unable to change virtual machine power state: Failed to connect to peer
process.
when I try to boot any guest OS. I have added myself to the vmware
group, executed the vmware-config.pl script and even logged out and in
again.
Any ideas?
Thanks,
jules
VMware version:
On Mon, 2005-09-19 at 12:53 +0200, Jules Colding wrote:
Hi,
I am now getting:
Unable to change virtual machine power state: Failed to connect to peer
process.
I found the fix here:
http://software.groupbrowser.com/nextthread51611.html
It seems that /opt/vmware/lib/bin/vmware-vmx must
Hi,
I am trying to emerge alsa-driver-1.0.10_rc2 on amd64. This package is
in /usr/portage/package.mask. Can I emerge it without editing
package.mask?
Thanks,
jules
--
gentoo-user@gentoo.org mailing list
On Fri, 2005-10-28 at 12:08 +, Jules Colding wrote:
Hi,
I am trying to emerge alsa-driver-1.0.10_rc2 on amd64. This package is
in /usr/portage/package.mask. Can I emerge it without editing
package.mask?
I should add that I tried to add it to package.unmask, but that didn't
help
On Fri, 2005-10-28 at 14:17 +0200, Jules Colding wrote:
On Fri, 2005-10-28 at 12:08 +, Jules Colding wrote:
Hi,
I am trying to emerge alsa-driver-1.0.10_rc2 on amd64. This package is
in /usr/portage/package.mask. Can I emerge it without editing
package.mask?
I should add that I
Hi,
Todays emerge -vauDN world failed with gnupg not being emerged. The
reason seems to be that I am emerging a new kernel too. This new kernel
has obviously not been configured/build yet which makes gnupg unable to
find .config in /usr/src/linux/. I expect this problem to go away when
the new
Hi,
nvidia-kernel fails to load in 2.6.14-gentoo-r2. /var/log/messages
below.
Best regards,
jules
Nov 24 13:29:01 omc-2 [ 112.677286] Adding 1004052k swap on /dev/sda3.
Priority:-1 extents:1 across:1004052k
Nov 24 13:29:01 omc-2 [ 115.795192] nvidia: module license 'NVIDIA' taints
On Thu, 2005-11-24 at 14:01 +, Neil Bothwick wrote:
On Thu, 24 Nov 2005 13:48:00 +0100, Jules Colding wrote:
nvidia-kernel fails to load in 2.6.14-gentoo-r2. /var/log/messages
below.
### emerge --info #
omc-2 ~ # emerge --info
Portage 2.0.51.22-r3
On Thu, 2005-11-24 at 18:14 +, Neil Bothwick wrote:
On Thu, 24 Nov 2005 15:41:17 +0100, Jules Colding wrote:
But I double-checked anyway and nvidia still has unknown symbols in the
latest kernel. I have attached the emerge output from the nvidia build
and the emerge info from
Hi,
I've now been unable to start gvim for a few months. It is complaining
about missing fontsets (whatever that means). I've pasted the terminal
output here:
[EMAIL PROTECTED] ~/work/src/brutus/idl/products/evolution/2.4 $ gvim
Warning: Missing charsets in String to FontSet conversion
On Tue, 2007-02-27 at 11:48 +0100, Bo Ørsted Andresen wrote:
On Tuesday 27 February 2007 11:22:18 Jules Colding wrote:
I've now been unable to start gvim for a few months. It is complaining
about missing fontsets (whatever that means). I've pasted the terminal
output here:
[EMAIL
Hi,
I've just tried to install nexuiz. Unfortunately it failed with [Errno
28] No space left on device.
I can see that some files was installed. Can portage clean those up by
itself or do I have to do it manually?
Thanks,
jules
--
gentoo-user@gentoo.org mailing list
On Thu, 2007-03-01 at 06:41 -0600, Boyd Stephen Smith Jr. wrote:
On Thursday 01 March 2007, Jules Colding [EMAIL PROTECTED] wrote
about '[gentoo-user] Can portage clean up after a failed installation?':
I've just tried to install nexuiz. Unfortunately it failed with [Errno
28] No space left
On Thu, 2007-03-01 at 14:22 +0100, Bo Ørsted Andresen wrote:
On Thursday 01 March 2007 12:30:59 Jules Colding wrote:
I've just tried to install nexuiz. Unfortunately it failed with [Errno
28] No space left on device.
I can see that some files was installed. Can portage clean those up
Hi,
The question might seem silly, but I'm writing a few lines in my
'configure.in' that should detect which distribution the package is
being build on. This is for making distribution dependent modifications
in the source/build scripts.
So, how do I detect that I'm on gentoo? Anything like
2007 15:36, Jules Colding a écrit :
Hi,
The question might seem silly, but I'm writing a few lines in my
'configure.in' that should detect which distribution the package is
being build on. This is for making distribution dependent modifications
in the source/build scripts.
So, how do
Hi,
I always want to build evolution and evolution-data-server with:
CFLAGS=-march=k8 -O1 -ggdb -pipe
FEATURES=splitdebug
as opposed to other all packages which I want to build with:
CFLAGS=-march=k8 -O2 -pipe
How can I arrange for this to happen without manually
changing /etc/make.conf
On Sat, 2007-04-14 at 14:13 +0200, Bo Ørsted Andresen wrote:
On Saturday 14 April 2007 14:08:58 Bo Ørsted Andresen wrote:
# CAT END /etc/portage/env/mail-client/evolution
Heh, that obviously went out a bit too fast. cat not CAT. :)
I got the idea ;-)
Thanks a lot,
jules
--
[EMAIL
Hi,
My XFS problems continue. Now I got this in my log. Do I have big
hardware problems or is this software? It happened under a fairly big
VMware clone operation.
Any help/advise would be greatly appreciated.
Thanks,
jules
May 30 10:29:27 omc-2 spamd[5932]: prefork: child states: II
May 30
On Wed, 2007-05-30 at 08:24 -0400, Randy Barlow wrote:
Jules Colding wrote:
May 30 10:29:40 omc-2 [10822.156355] sd 0:4:1:0: SCSI error: return code =
0x00040001
May 30 10:29:40 omc-2 [10822.156423] end_request: I/O error, dev sdb,
sector 97564151
May 30 10:29:46 omc-2 [10827.996196
Hi,
Todays emerge --sync emerge -vauDN world made me wonder a lot.
A lot of packages should be updated according to portage, but a lot of
them seems to be wrong with regard to the reported version number.
Take e.g. Evolution of which I have version 2.4.2.1 installed. Portage
is saying that I
On Thu, 2006-03-23 at 10:40 +0100, Jules Colding wrote:
So what exactly is going on here?
Having an SSH session on another machine and forgetting ll about it.
Please forgive my stupidity here.
Sorry,
jules
--
gentoo-user@gentoo.org mailing list
On Thu, 2006-03-23 at 06:26 -0600, Teresa and Dale wrote:
Jules Colding wrote:
On Thu, 2006-03-23 at 10:40 +0100, Jules Colding wrote:
So what exactly is going on here?
Having an SSH session on another machine and forgetting ll about it.
Please forgive my stupidity here
On Thu, 2006-03-23 at 14:36 +0100, Toby 'qubit' Cubitt wrote:
Having an SSH session on another machine and forgetting ll about it.
Please forgive my stupidity here.
Sorry,
jules
I thought only I could do that. Funny ain't it?
Not when you do it in public ;-)
I
Hi,
I have configured gdm to start two X sessions. I choose between these
sessions with CTRL-ALT-f7 and CTRL-ALT-f8. I am simultaneously logged in
as two different users in these X session.
I have previously experienced no problems whatsoever going from one X
session to another but that has
On Mon, 2006-03-27 at 13:08 +0200, Jules Colding wrote:
Hi,
I have configured gdm to start two X sessions. I choose between these
sessions with CTRL-ALT-f7 and CTRL-ALT-f8. I am simultaneously logged in
as two different users in these X session.
I have previously experienced no problems
On Thu, 2006-03-30 at 00:01 -0300, Norberto Bensa wrote:
Kristian Poul Herkild wrote:
Well, I have an old GeForce2 MX400 and I'm using 1.0.8178-r3 with GLX,
though only with X.org6.8
But 1.0.8178 works much better than the older ones. 6629 never worked
for me - the oldest I can use
Hi,
I am having trouble with the latest NVidia drivers:
http://bugs.gentoo.org/show_bug.cgi?id=127824
Are there any way for me to get the maximum amount of debug information
out of the X crash so that I can help the developers fixing it?
Thanks,
jules
--
gentoo-user@gentoo.org mailing
On Mon, 2006-04-10 at 07:49 -0700, Richard Fish wrote:
On 4/10/06, Jules Colding [EMAIL PROTECTED] wrote:
Hi,
I am having trouble with the latest NVidia drivers:
http://bugs.gentoo.org/show_bug.cgi?id=127824
Are there any way for me to get the maximum amount of debug information
Hi,
A few moments ago I tried to emerge slocate but got:
#
omc-2 ~ # emerge -va sys-apps/slocate
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild N] sys-apps/slocate-2.7-r8 0 kB
Total size of downloads: 0 kB
Do you
On Fri, 2006-04-21 at 11:24 -0700, Richard Fish wrote:
On 4/21/06, Johám-Luís Miguéns Vila [EMAIL PROTECTED] wrote:
On 09:09 Fri 21 Apr , Jules Colding wrote:
emerge (1 of 1) sys-apps/slocate-2.7-r8 to /
!!! Files listed in the manifest do not exist!
slocate-3.1.ebuild
files
Hi,
Today I got a blocker when trying to do emerge -vauDN world. The
blocker was pam-login. I un-merged this and repeated the emerge which
completed flawlessly. Then I tried to re-emerge pam-login but now I am
getting:
##
omc-2 ~ # emerge -va
On Wed, 2006-05-31 at 00:38 -0700, Ryan Tandy wrote:
Jules Colding wrote:
##
omc-2 ~ # emerge -va sys-apps/pam-login
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[blocks B ] =sys-apps
Hi,
I can't get hal to rebuild after having upgraded dbus. My revdep-rebuild
failed with this:
if x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I..
-DPACKAGE_DATA_DIR=\/usr/share\ -DPACKAGE_BIN_DIR=\/usr/bin\
-DPACKAGE_LOCALE_DIR=\/usr/share/locale\ -I..
On Mon, 2007-01-22 at 15:20 +0100, Jules Colding wrote:
Hi,
I can't get hal to rebuild after having upgraded dbus. My revdep-rebuild
failed with this:
OK, fixed by the next 'emerge --sync'.
--
jules
--
gentoo-user@gentoo.org mailing list
xvid zlib userland_GNU kernel_linux elibc_glibc
Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY
Any suggestions?
Thanks,
jules
--
Jules Colding
PGP Public Key: 6266E7B7
--
gentoo-user@gentoo.org mailing list
On Thu, 2005-07-21 at 19:12 -0700, Zac Medico wrote:
Hi Jules,
Jules Colding wrote:
[snip]
../../config/make-jars.pl: Could not get lockfile
/var/tmp/portage/mozilla-firefox-1.0.5-r1/work/mozilla/dist/bin/chrome/toolkit.lck.
[snip]
MAKEOPTS=-j3
Try it with MAKEOPTS=-j2.
OK, did
--
Jules Colding
PGP Public Key: 6266E7B7
--
gentoo-user@gentoo.org mailing list
On Fri, 2005-07-22 at 09:42 -0700, Zac Medico wrote:
[snip]
+++ making
chrome
/var/tmp/portage/mozilla-firefox-1.0.5-r1/work/mozilla/extensions/cookie =
../../dist/bin/chrome/classic.jar
../../config/make-jars.pl: Could not get
lockfile
On Fri, 2005-07-22 at 10:54 -0700, Zac Medico wrote:
Since you rebuilt from scratch, assuming that most other people can
build successfully with equivalent settings, it seems like something
in the toolchain (see output of emerge --info) is actually is
broken. Maybe it's just make itself
On Fri, 2005-07-22 at 18:28 -0700, Bob Sanders wrote:
On Fri, 22 Jul 2005 18:12:02 +0200
Jules Colding [EMAIL PROTECTED] wrote:
I have the above mentioned sound card installed in my dual 252 Opteron.
I have enabled ALSA and OSS emulation in the kernel and everything is
compiled
On Fri, 2005-07-22 at 18:28 -0700, Bob Sanders wrote:
SB Audigy cards aren't the best sounding cards out there. They are OK, but
if you mainly want music, look elsewhere. If you're mainly interested in
games
they work fine.
BTW: Which AMD64-compliant card do you recommend for music?
Hi,
emerge --sync emerge -vauDN today gave me the following error.
--
jules
## Build Error #
../../dist/bin/xpt_link _xpidlgen/cookie.xpt _xpidlgen/nsIImgManager.xpt
_xpidlgen/nsIPermission.xpt _xpidlgen/nsICookieAcceptDialog.xpt
On Fri, 2005-07-22 at 18:28 -0700, Bob Sanders wrote:
Repeating clicks is usually an indication of empty audio buffers. It means
your system can't keep the sound card supplied with data. You might be
able to get some help by making your kernel preemptible -
Symbol: PREEMPT [=y]
On Sat, 2005-07-23 at 14:50 +0200, Holly Bostick wrote:
Well, since I just (literally, 10 minutes ago) emerged
mozilla-firefox-1.0.6-r2, and had no problems on a 32-bit system, I must
suspect that this is a 64-bit issue.
In that regard, I see at least one thing in your emerge info that has
On Fri, 2005-07-22 at 18:12 +0200, Jules Colding wrote:
Hi,
I have the above mentioned sound card installed in my dual 252 Opteron.
I have enabled ALSA and OSS emulation in the kernel and everything is
compiled in, no alsa modules. The card is correctly detected on boot-up
and apparently
On Sat, 2005-07-23 at 11:51 -0700, Zac Medico wrote:
Jules Colding wrote:
Hi,
emerge --sync emerge -vauDN today gave me the following error.
[snip]
adding: content/cookie/contents.rdf (stored 0%)
+++ making
chrome
/var/tmp/portage/mozilla-firefox-1.0.6-r2/work/mozilla
On Sat, 2005-07-23 at 23:26 +0200, Richard Fish wrote:
Hmm, since others with similar systems cannot duplicate the problem, I
decided to capture all of the build output on my system (P4) and
compare. Jules, there is definitely something not right on your system,
but I don't know what yet.
On Sun, 2005-07-24 at 14:22 +0200, Jules Colding wrote:
On Sat, 2005-07-23 at 11:51 -0700, Zac Medico wrote:
Jules Colding wrote:
Hi,
emerge --sync emerge -vauDN today gave me the following error.
[snip]
adding: content/cookie/contents.rdf (stored 0%)
+++ making
On Sun, 2005-07-24 at 01:02 +0200, Patrick Börjesson wrote:
Although... I would suggest that the OP give a more explicit question,
since I was really not sure if it was a anyone seen this before?, I'm
a n00b, please solve this for me! or a where should I take this to get
it solved? question.
On Sat, 2005-07-23 at 12:08 -0700, Bob Sanders wrote:
On Sat, 23 Jul 2005 20:51:53 +0200
Jules Colding [EMAIL PROTECTED] wrote:
Thank you for your advise. I got sound working by disabling ALSA and
using OSS instead. I think this is an ALSA AMD64 issue.
No, it's not. The reason I
On Sat, 2005-07-23 at 11:51 -0700, Zac Medico wrote:
This seems like a continuation of the previous build problems that you
have had with firefox (where we were discussing MAKEOPTS). Assuming
that others cannot reproduce this (sorry, I don't have my amd64 right
now), there's still something
On Sun, 2005-07-24 at 14:48 +0200, Richard Fish wrote:
Well, since world includes system, if you want to rebuild *everything*,
I would think the following should be sufficient
emerge --oneshot gcc binutils
OK. What about glibc or is that just a part of world?
--
jules
--
On Sun, 2005-07-24 at 15:20 +0200, Richard Fish wrote:
Jules Colding wrote:
Hmm... Among my USE flags is nptlonly. Might that be a problem?
Well, nptlonly seems to work for a lot of people, so I don't think that
should be a problem. I've only ever heard of it affecting old
binary-only
On Sun, 2005-07-24 at 16:28 +0300, Rumen Yotov wrote:
Hi,
Don't have any new idea, but could you check if there are some
hardened USE-flags in your /etc/make.conf (like 'pic', 'pie',
'hardened' etc). Using some of them on a normal system may cause problems.
HTH. Rumen
Nope, none.
Thanks,
On Sun, 2005-07-24 at 15:51 +0200, Richard Fish wrote:
Jules Colding wrote:
Hmm... I am seeing (-multilib) when doing the emerge of gcc and
binutils, so multilib is disabled by my profile and shouldn't be enabled
manually, right?
Could you double check the symlink /etc/make.profile
On Sun, 2005-07-24 at 15:58 +0200, Richard Fish wrote:
Richard Fish wrote:
Could you double check the symlink /etc/make.profile. AFAIK, you want
it to point to /usr/portage/profiles/default-linux/amd64/2005.0.
But read this first before changing anything:
On Sun, 2005-07-24 at 17:43 +0300, Rumen Yotov wrote:
No experience with 64-bits, but a USE-flag in () means not supported by
the profile. Have you changed profiles?
No.
Thanks,
jules
--
gentoo-user@gentoo.org mailing list
On Sun, 2005-07-24 at 11:10 -0700, Bob Sanders wrote:
On Sun, 24 Jul 2005 17:06:49 +0200
Richard Fish [EMAIL PROTECTED] wrote:
Argh, I don't get it. /u/p/p/default-linux/amd64/2005.0/use.mask
contains multilib, but with a comment stating it is forced on when
MULTILIB_ABIS is
Hi,
I can't emerge mozilla-1.7.10-r1. I don't know if this is just me or if
anyone else is seeing the same, but here is what I got. Output and info
below.
Regards,
jules
# snip ##
omc-2 ~ # emerge -vauDN world
These are the packages that I would merge, in order:
On Mon, 2005-08-01 at 17:24 -0700, Zac Medico wrote:
Hi Zac,
Hi Jules,
Jules Colding wrote:
Hi,
I can't emerge mozilla-1.7.10-r1. I don't know if this is just me or if
anyone else is seeing the same, but here is what I got. Output and info
below.
snip (lots of text)
What
On Wed, 2005-08-03 at 00:57 -0700, Zac Medico wrote:
Jules Colding wrote:
On Tue, 2005-08-02 at 18:14 +0200, Richard Fish wrote:
Jules Colding wrote:
I would expect other things to fail too if it was bad RAM or memory
timings, right? The only failure scenario is mkdir under high load
Hi,
Just a heads-up. Updating worlds today is not working due to required
ebuilds being masked on amd64.
--
jules
snip #
omc-2 ~ # emerge -vauDN world
These are the packages that I would merge, in order:
Calculating world dependencies |
!!! All ebuilds that could satisfy
Hi,
Evolution is crashing on me on start with the following output:
## snip ##
[EMAIL PROTECTED] ~ $ evolution
es menu class init
adding hook target 'source'
(evolution:8059): camel-WARNING **: Invalid root:
'/home/colding/.evolution/mail/local/Drafts.ibex.index'
1 - 100 of 114 matches
Mail list logo
