I have a inspiron 8200 with a radeon mobility 9000. I currently have
xorg 6.7.0-r3 installed. Last night I tried to upgrade to 6.8.
Because of blocking issues I had to unmerge xorg and remerge it.
Thank god for quickpkg. Once 6.8 was emerged I started x and things
were ugly. All sorts of
I have a inspiron 8600 with a radeon mobility 9600 and use
xorg-x11-6.8.2-r1 without corruption. It runs at 1920x1200. But there is
no 3D graphic. Here are the relevant parts of my xorg.conf:
Section Module # kdm does not start without this, even if empty
SubSection extmod #
] wrote:
Lucien D. wrote:
Section ServerFlags
Option off time 4
EndSection
I have nothing in ServerFlags. Whats this setting for? monitor off,
or backlight, or what?
From man:xorg.conf:
Option N'34'OffTimeN'34' N'34'timeN'34'
sets the inactivity timeout for the off phase
/05, Richard Fish [EMAIL PROTECTED] wrote:
Lucien D. wrote:
Ok, making progress. I installed 6.8.2-r1, did X -configure and its
working, well mostly. Two problems.
well first, it seems like its running at a really high resolution, I
always ran at 1600 which I thought was the highest
cannot figure out yet how to tune
channels from the command line so hopefully Myth will get that job
done for me tomorrow.
Take care and thanks,
Mark
On 4/22/05, Lucien D. [EMAIL PROTECTED] wrote:
no problem, its nice to be able to answer questions occasionally
instead of just asking them
Make sure the card is recognized in lspci, heres the output from mine
000:00:10.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Flags: bus master, medium devsel, latency 64,
no problem, its nice to be able to answer questions occasionally
instead of just asking them.
On 4/22/05, Mark Knecht [EMAIL PROTECTED] wrote:
On 4/22/05, Nick Rout [EMAIL PROTECTED] wrote:
On Fri, 2005-04-22 at 16:15 -0700, Mark Knecht wrote:
Is that driver required before the
I believe you have to have Load extmod in ur x config. Mine was
there automatically after X -config, but I'm pretty sure thats the
module u need for xvideo.
On 4/23/05, Mark Knecht [EMAIL PROTECTED] wrote:
Hello again,
SHORT FORM: What is 'Xv support' and how do I set it up? xvinfo says
recorded files to mpeg to see how they work.
Take care,
Mark
On 4/24/05, Lucien D. [EMAIL PROTECTED] wrote:
Not a kernel module, its a X windows module. for example, this is the
section from my /etc/X11/xorg.conf
Section Module
Loaddbe # Double buffer extension
127.0.0.1
anywhere).
Lucien
On 4/24/05, Lucien D. [EMAIL PROTECTED] wrote:
Yea, xvideo is definitely effected by graphics drivers and what not.
I know on my laptop I couldn't use xvideo on an external monitor until
this latest version of xorg.
I do use nuvexport. I just started using
.
Lucien
On 4/25/05, Mark Knecht [EMAIL PROTECTED] wrote:
On 4/24/05, Lucien D. [EMAIL PROTECTED] wrote:
This is just a guess, but it looks like that nuvinfo only looks at the
file information, which seem ok, but that nuvexport looks at the sql
db for show names and info, and that would lead
I had the same problem recently, I solved it by manually downloading it
with wget, just do wget --no-check-certificate URL, then copy over to
/usr/portage/distfiles and rerun emerge command.
Lucien
On 17:29 Tue 15 Nov , James wrote:
Hello
I've been trying to emerge (install):
This problem has been irking me for some time now.
Whenever I try to build packages manually i.e. not emerge. They fail
when executing ./configure with the following error:
Invalid configuration `i686-pc-linux-': machine `i686-pc-linux' not
recognized
configure: error: /bin/sh ./config.sub
On 7/27/05, Justin Patrin [EMAIL PROTECTED] wrote:
On 7/27/05, Alexander Skwar [EMAIL PROTECTED] wrote:
Hello.
I finally bought myself a somewhat low end notebook on which I want
to install Gentoo as well. Since this is a low end box and since
my main system is not low end :), I'd like
phaedrus lu # cardmgr
cardmgr[10882]: no device drivers defined
cardmgr[10882]: no cards defined
cardmgr[10882]: no sockets found!
This is my problem, I've been troubleshooting it off and on for a
while now with no luck.
I'm running 2.6.11 gentoo-sources and version 3.2.8-r2 of pcmcia-cs.
Right
09:17, Lucien D. wrote:
phaedrus lu # zgrep CONFIG_PCMCIA /proc/config.gz
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_PROBE=y
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC
16 matches
Mail list logo
