question on their support site was only a few months ago.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives
are shutting down a Started Task, say for maintenance.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives
Others have already mentioned 'hardware-based' facilities like PPRC XRC.
One aspect of those options that is sometimes overlooked is they are
chargeable features on the source ( for both facilities ) and target ( for PPRC
only ). The XRC option also would require some 'configuration'
/OS
image usually IPL's on a monthly basis and we have never encountered an
issue with Changeman that required us to IPL.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
the 'long
route'. EMC was very involved during the implementation of our SRDF/S
process in 2004, so I'm a little surprised they couln't find us for you.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access
the beep if the 3270 data stream says a
beep should be performed.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search
, maybe replace,
don't remember, a couple of entires in the VM/CP nucleus 'CNTL' file before the
VM/CP nucleus re-build. When I saw your post, I thought of this VM Magic
product and how it did its 'magic'.
HTH
Glenn Miller
backed off to the previous microcode, but left the upgraded HSC/VTCS
software running on all our z/OS images. We sent SUN/STK the HSC trace
data they requested we activate and we are awaiting their response.
Ideas, thoughts, suggestions, etc.
Thanks,
Glenn Miller
you in advance for any help you can give us.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http
this problem. I'm interested in 'talking' with any
site that is running the same configuration as us.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message
CODE WAS 0
I also received the following messages on each of my z/OS images, which I
normally receive whenever I start a PPRC pair on my system:
IEA494I 3F3E,SO3F3E,PPRC PAIR PENDING,SSID=992F,CCA=3E
IEA494I 3F3E,SO3F3E,PPRC PAIR FULL DUPLEX,SSID=992F,CCA=3E
HTH
Glenn Miller
Hi Ron,
You can contact me off-list at the email address:
[EMAIL PROTECTED]
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
I'm not really clear on how/why/were SUN/STK got involved, unless you
purchased the switches from SUN/STK. That would make sense. If not, then
I'm not sure what the 'connection' issue is.
HTH
Glenn Miller
, however they indicated
they have a two day turnaround for some problems, longer for more complex
issues. I was just wondering.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
. We have extra boxes so if we ever have
a box failure we plan ( haven't had to yet ) to replace the failing box with
another unit. Not a great plan, full of questions but...
HTH
Glenn Miller
--
For IBM-MAIN subscribe
Offload SYSOUT
transmitter ( the OFFn.ST ) instead of DISP=KEEP. I have used DISP=KEEP
before just for testing, and I have found it very difficult to verify that my
OFFLOAD dataset contains what I thought it should.
HTH
Glenn Miller
: WMQTool! from a
company called: Niratul . We don't use this tool however he mentioned that it
because it has a 30 day trial.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL
Use this URL for the Chicago Area VM ( and Linux ) ENthusiasts:
http://cavmen.home.comcast.net
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message
or did you want
to have HSM begin using those 'new' address spaces for the 1st time?
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM
-implementing-ldmf.pdf
We have never used the LDMF product, only the TDMF product so I don't
have any real world experience.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
sites ( almost 40km ). The 9037 says it is supported up to
40km. Who wants to be that close to edge.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED
Hi Steve,
I had the same thought when I read that IBM announcement letter. When I
read the IBM announcement letter: 208-076, that product IBM System
Services Runtime Environment for z/OS seems to fit. We don't have that IBM
TPC for z/OS product.
Glenn Miller
for the PMR
number to be sent to me via Email. No ETA for repair.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search
information for all the 9672 processors. The Sales manual shows the
withdraw from marketing and withdraw from service dates for each of the
model types.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access
created, i.e. within a few minutes
prior to the CDRT 'setup' process ) on the D/R z/OS image? Or do
you 'restore' your z/OS 'system' from non-current VTV's that reside on MVC's
that cannot be added to ( i.e. the MVC is marked 'full' )?
Thank you in advance for your help.
Glenn Miller
. I had a 15
minute outage window, once a month to maintenance the O/S, hardware, etc.
There had been a project to replace the HP/Tandem Base24 system with a
z/OS-based Base24-eps solution. However, that project never really got
going.
HTH
Glenn Miller
capable of running at or very near 24x365.
I would have been very interested to see it run.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM
the INFO APAR: II08927 might apply.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu
reader Spool files that are intended to be
sent to the MVS JES2 NODE?
I don't recall the RSCS commands to perform these checks, we haven't had
RSCS since 1999.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access
be an issue.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
( probally sequential reads ).
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm
' increase
from z900 to z990 is being caused by 1) new function support 2) support for
non-disruptive ( no POR ) addition of all engines/books. I would assume that
the z9 is continuing/growing that capability.
Glenn Miller
--
For IBM
recommends that you use record type 30 rather than record types
4, 5, 20, 34, 35, and 40. Use of record type 5 may cause you to
miss key workload indicators.
Therefore, it would seem that using the SMF Type 5 record might be risk.
Glenn
recently ( last couple of weeks ) 'patched together' a similar SNMP interface
between IBM's SA/390 and CA-UNICENTER. We don't have IBM's Tivoli
Enterprise Console ( TEC ) so we had to 'band-aid' a SNMP interface with IBM
SA/390.
Glenn Miller
, technically, any outage outside of the above stated timeframe should be
identified as an un-scheduled outage, depending on your point-of-view.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
AND SYSTEM RESET
CLEAR the CF LPAR that contains the primary checkpoint ( simulates a site
failure at the primary site ). Then IPL z/OS and restart JES2, see what
messages/WTORs JES2 issues.
HTH
Glenn Miller
--
For IBM-MAIN
DFSMS Advanced Copy Services.
All of the above assumes that the reason you need the 'parallel' copy of these
datasets is because you do not want to quiesce the application ( CA7 ) that
owns these datasets.
HTH
Glenn Miller
or approval?
Just wondering.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm
address.
I have found it easier to just specify 2-byte link addresses for all control
units
on my FICON directors. It works and avoids confusion.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions
Also, the 'sunset' warning messages are not being displayed anymore when
you enter each function. I tried to access these functions on Sunday morning
about 02:00 Central Time and they were unavailable(down). The 'sunset'
messages were there indicated the functions were unavailable.
Glenn
of 2
smaller CECs. Alas, that hasn't happened yet.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http
servers ( some
9672s and MP2000/MP3000 ) would not be manageable by that upgraded HMC.
Since the ETS call out function of the STP feature uses the HMC you should
already have the modem/phone line available ( does anyone run all their HMCs
without a modem/phone line, just curious ).
HTH
Glenn
to the 'MVS BTAM Cookbook' which
describes how to 'extract' the BTAM/SP FMID's from an existing SMP/E
environment and how to 'transfer' them to another SMP/E environment.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive
run
in
a STP-only CTN environment, then the ETS call out would be done by your
zSeries HMC. However, the gradual adjustment to the CST ( Coordinated
Server Time ) is done by the Support Element.
HTH
Glenn Miller
--
For IBM
of their TOD clock
of as much as 25 seconds per month, yet they are still 'within spec'. If one
was to experience a mainframe TOD clock drift ( current supported machines,
not 3090s, ES/9000s, etc ) of something much larger than that, I recommend
you place a call with IBM Hardware support.
HTH
Glenn
if you have any questions regarding this info.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http
)
* CAN'T HAVE SYMBOLIC(S) E.G. (OSRES ETC.)
The INFO APAR also has a couple of examples of what does and doesn't work
with LOADxx and System Symbols.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access
Hal,
I had encountered the same problem a few years ago. The response I got
from IBM was that the 'UCB pinning' activity was done for every device listed
in the CONSOLxx member, regardless of whether that device was or ever could
be 'activated' as a MVS console. They indicated the 'UCB
' anything wasn't cool 10 years ago when STK
designed the Iceberg box.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender
( the IBM RVA doesn't count, it was a 'newer' STK ICEBERG
with an IBM label
on the cover of the machine ) the LSA concept to internally store the data.
Glenn Miller
---
This message (including any attachments) is confidential
the 'workbench' tool would not be included. It doesn't appear that this
'workbench' tool is available
as a standalone product. Does anyone know why the 'workbench' tool was not
given to the
open source community?
Glenn Miller
and enter the LINK
command
again.
Operator Response: Contact your system administrator to obtain the
necessary
authorization.
I'll bet somebody changed something in the database of RACF/VM.
Glenn Miller
---
This message
notifications. Generally multiple PTFs are created for an APAR
(for the different releases, platforms, etc.).
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received
in a PDS/PDSE compare
to a 'backlevel' version of the same member?
Please contact me off-list if you have specific questions.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged
to apply the PTF until Thursday night, so I may not be
able to provide
any additional information until Friday or later.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged
,
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender by
return e-mail and delete this message from your system. Any
in the 'background' without a z/OS
image being there
( after the initial Flashcopy or PPRC commands, of course ).
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received
:36:46 HCPCPS6000E The range of device numbers cannot exceed 256.
Ready(06000); T=0.01/0.01 17:36:46
Guess I have an answer.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged
.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender by
return e-mail and delete this message from your system. Any
having last week, IBM LE COBOL Level 2 support
confirmed the above
information as being accurate for z/OS R7.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have
9672, maybe
this applies.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender by
return e-mail and delete this message
have a PMR opened with the TAMBI product's level 2 group to ask why this
is.
Thanks,
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please
to be bigger that 639KB.
I have a PMR with IBMLINK2K support.
Thanks all,
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify
for this
situation. We are working with the application vendor on this issue.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify
document is sent to
the Windows users, that CICS virtual storage also appears to be released.
Lastly, the View Direct Administration task ( a Batch Job in our
environment ) appears to have a very stable, almost consistent use of its
virtual storage area.
HTH
Glenn Miller
is a OPS/MVS REXX exec that looks like:
ARG JOBN
PARM = /LOGON OPSMAIN;DEMAND,JOB=JOBN;/LOGOFF
RC = OPSCA7(PARM)
RETURN RC
I'm guessing you could substitute the Address OSF with a Address OPER
and substitute the OI CA7ID00 P1DM330D
with a(some) MVS command(s).
Glenn Miller
Hi Jim,
You may want to call STK ( Sun ). They have a product called: SVAA (
Shared Virtual Array Administrator ).
According to their website, the supported storage systems are: V-Series
(SVA) or RVA, any model.
HTH
Glenn Miller
the volume level or dataset level )? This support was provided by
LIC 2.4.0 for an IBM ESS and IBM APAR: OA05856 more than a year ago so
I was hoping someone had tried it.
Anyone willing to share their experience and answer a few questions?
Offlist
maybe?
Thanks.
Glenn Miller
was hoping someone had tried it.
Anyone will to share their expierence and answer a few questions? Offlist
maybe?
Thanks.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you
for your help.
Glenn Miller
PS: If you have any non-public questions, please contact me directly.
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please
the XRC SDM system could 'see' them. I never tried to use the ESCON
interface to
Flashcopy a volume from the 'lower' CUADD's ( CUADD '0' thru 'F' ) to the
'upper' CUADD's.
( CUADD '10' thru '1F' ). My guess would be it wouldn't work.
HTH
Glenn Miller
a 'move character
inverse' instruction work really nice.
However, I saw a creative way to use 2 instructions that would reverse the
data in the read buffer. Remember
this code was originally written for a S/360 Model 30 machine. Anyone have
a guess what these instructions
were/are?
Glenn Miller
program seems to have very different logic. I never tested the
PL/1 program. These
may be of some help.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received
running CA-MII in SELECT vs. ALLSYSTEMS
mode. Its dated March 2005, so its a recent document. I received it from
our CA-MIM SysProg, so I don't know if its available on CA's Website.
Thanks to all who responded to my query.
Glenn Miller
the 'SELECT' ENQ Processing mode of CA-MII.
If you have the CA-MII product, which mode do you use, 'SELECT' or
'ALLSYSTEMS?
Thank you for your time.
Glenn Miller
PS: To display your CA-MII ENQ Processing mode, use the following command:
F MIMx,D GDIF INIT
You should see the following
active than my
sandbox system.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender by
return e-mail and delete
(2)
I checked, the z/OS R7 manual still has the value coded incorrectly.
The IBM'er I spoke to ( via an ETR ) indicated he would submit a
Reader's Comment Form to correct the coding error.
Glenn Miller
PS: If you execute the code from the example with the incorrect coding
of the NUMSEG label
, these may not meet your
requirement.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender by
return e-mail and delete
a previous job and that no HFS is left mounted after a
maintenance run.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify
Coupling Facilities: 12
Parallel Channels: 0
Open System Adapters: 8
Fiber Channels: 52
Other Channels: 2
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have
, you are not REQUIRED to convert to z2 mode to
support a z/OS R6 JES2 system.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify
helpful for APAR: OA04069 to have this information.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender by
return e-mail
83 matches
Mail list logo
