Hi Folks,
Is anyone else out there having problems pulling down PSP buckets today?
I'm hitting:
http://www14.software.ibm.com/webapp/set2/psearch/search?domain=psp
I'm getting 503 Service Temporarily Unavailable.
Thanks!
BobL
mailgate3.oppenheimerfunds.com made the following
Hi Kirk,
Ah, the voice of reason.
Off with his Head!!!
:-)
BobL
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Kirk Wolf
Sent: Monday, March 26, 2012 3:29 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: A z/OS Redbook
Of
Bob Rutledge
Sent: Monday, March 19, 2012 5:32 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: DASD Mod9/Mod54
Lester, Bob wrote:
Hi Folks,
With todays' modern disk arrays, is there any reason (z/OS based or
other) that response time for my Mod54s is consistently higher than for my
Mod9s
Of Lester, Bob
Sent: Monday, March 19, 2012 3:57 PM
To: IBM-MAIN@bama.ua.edu
Subject: [IBM-MAIN] DASD Mod9/Mod54
Hi Folks,
With todays' modern disk arrays, is there any reason (z/OS based
or
other)
that response time for my Mod54s is consistently higher than for my Mod9s
@bama.ua.edu
Subject: Re: DASD Mod9/Mod54
Lester, Bob bles...@oppenheimerfunds.com wrote in message
news:8f672be771329649a9eb59c7d9d6a2d9521e8...@den-xmail01.den.ofi.com.
..
Hi Folks,
With todays' modern disk arrays, is there any reason (z/OS based
or other) that response time for my Mod54s
Hi Folks,
With todays' modern disk arrays, is there any reason (z/OS based or other)
that response time for my Mod54s is consistently higher than for my Mod9s?
Assume identical workload against each, single array with multiple LCUs.
RMF says the LCUs are pretty well balanced.
Hi Helio,
This sounds like STROBE. Have you checked the manual on how to stop it?
Thanks!
BobL
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Helio Jose Da Silva
Sent: Monday, January 09, 2012 11:05 AM
To: IBM-MAIN@bama.ua.edu
Hi Folks,
Forgive me if this has been discussed before.
Given a large file - say 2TB or so on the mainframe. Let's say it's a PS
file without any packed fields.
A process on a remote unix machine needs to read this data.
Does anyone know if an NFS mount of the file -
Hi Ken,
Here's the eyecatcher from a DMS (CA-DISK) 12.5 disk archive. It's around
column 4744 on my release.
.DMSRELNOC ..12.5
Hope this helps.
BobL
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Ken Porowski
Sent:
Is that at the beginning of the backup file?
-Original Message-
Lester, Bob
Hi Ken,
Here's the eyecatcher from a DMS (CA-DISK) 12.5 disk archive. It's around
column 4744 on my release.
.DMSRELNOC ..12.5
Hope this helps.
BobL
-Original Message-
Ken Porowski
I have
Hi Folks,
I'll second (or third, or...) that. I've been using it for at least 5
years, and other than some Java version-related issues (what a surprise!), it
works well.
I use it to deploy doc to multiple LPARS (no shared DASD).
Thanks!
BobL
-Original Message-
From: IBM
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Ed Gould
Sent: Wednesday, July 20, 2011 4:56 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: CA-1 TMS QUESTION - IEFTMS9 TMC BACKUP REQUIRED
Frank,
Good info, thanks. One of the issues with the
Hi Folks,
I'm running z/OS 1.11 and EZANS that says it was packaged on February, 4
2011.
Wonderful tool. However, I can't seem to get it to give me any output for
option 91 (CICSsock). I've got multiple regions using CICS sockets and can
see them via EZANS using the ALLCON
, Lester, Bob bles...@oppenheimerfunds.com
wrote:
Hi Folks,
I'm running z/OS 1.11 and EZANS that says it was packaged on February, 4
2011.
Wonderful tool. However, I can't seem to get it to give me any output
for option 91 (CICSsock). I've got multiple regions using CICS sockets
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Burrell, C. Todd (CDC/OCOO/ITSO) (CTR)
Sent: Wednesday, June 15, 2011 3:18 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: An upbeat story
The main thing I have found that makes a good sysprog is
Hi John,
I believe that you're correct on this one. Many z/OS'ers despise z/Unix
for that (among other) reasons.
As someone who's been doing Mainframe sysadmin work for 30+ years, I
certainly understand that attitude - especially in this era of out-sourcing and
down-sizing.
Or Qualys
BobL
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Rob Schramm
Sent: Thursday, May 05, 2011 3:30 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: RIP issue with HMC - security violation?
Port Scanner is my bet.
Rob Schramm
On
Hi All,
This seems like a Friday topic, but...
I call it USS when referring to VTAM, and Z/unix when referring to OE.
Thanks!
BobL
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Don Leahy
Sent: Monday, May 02, 2011 3:36 PM
operand.
I've never done it but it might be easier to use DUMP and RESTORE. DUMP has the
NEWNAMEU operand which *appears* to be more inclusive.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Lester, Bob
Sent: Thursday, April 14, 2011 3:46
Hi Folks,
This may be an easy one, but I can't find the answer.
Copying a dataset with an AIX and path like this works fine:
COPY DATASET( -
INCLUDE(VOFD.CSLGROUP.MFDM0C0G, -(This is the base cluster
name and has an AIX and PATH)
...LOTS MORE
] On Behalf Of
Lester, Bob
Sent: Thursday, April 14, 2011 12:28 PM
To: IBM-MAIN@bama.ua.edu
Subject: DSSCOPY and AIX?
Hi Folks,
This may be an easy one, but I can't find the answer.
Copying a dataset with an AIX and path like this works fine:
COPY DATASET( -
INCLUDE(VOFD.CSLGROUP.MFDM0C0G
Hi,
OK, *trying* to get this back on topic, which of the airports
mentioned - if any - run IBM Mainfames?
:-)
BobL
Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Ted MacNEIL
Sent: Wednesday, February 23, 2011 4:26 PM
To:
: Tuesday, December 21, 2010 1:50 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Dynamic Allocation 1.9 - 1.11?
On Tue, 21 Dec 2010 13:19:31 -0700, Lester, Bob
bles...@oppenheimerfunds.com wrote:
We've uncovered a difference in Dynamic Allocation behavior between
z/OS 1.9 and z/OS 1.11 in our location
? - RESOLVED
On Mon, 27 Dec 2010 07:27:00 -0700, Lester, Bob
bles...@oppenheimerfunds.com wrote:
Hi,
Thanks for all the replies on this one.
It turned out to be a missed USERMOD for LE, and the CBLQDA setting
in particular.
DOH!
Thanks!
Bob Lester
Hi Bob,
I personally hate that option
Hi Folks,
We've uncovered a difference in Dynamic Allocation behavior between
z/OS 1.9 and z/OS 1.11 in our location.
A vendor software package does dynamic allocation from a program -
for an //ERRORS DD in this case. This batch job works fine under under
1.9, but abends under
@bama.ua.edu
Subject: Re: Dynamic Allocation 1.9 - 1.11?
On Tue, 21 Dec 2010 13:19:31 -0700 Lester, Bob
bles...@oppenheimerfunds.com wrote:
:We've uncovered a difference in Dynamic Allocation behavior
between
:z/OS 1.9 and z/OS 1.11 in our location.
:A vendor software package does dynamic
Hi Folks,
I'm on z/OS 1.9, and am receiving the following message when a 3rd
Party Product tries to delete a dataset.
IEC614I SCRATCH FAILED - RC 008, DIAGNOSTIC INFORMATION IS
(0409012C),
DMS,WRK30A,TODT.EXTRACT.MFDE0S0G
I'm not
as if the vendor product may be DMS, in
which case the answer is yes. The vendor should be able to find the
culprit by tracing the save area chain backwards.
Cheers,
Alan
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Lester, Bob
Sent
Hi Folks,
I'm trying to troubleshoot an FTP issue. This is a snippet from the
batch job. This is on z/OS 1.9. This job fails every morning, and when
restarted with no changes, it works! This is not a dial type circuit
.
EZA1460I Command:
EZA1736I ls
EZA1701I PORT
at this time? Perhaps there are only so many
ports open in the firewall(s)and you ran out.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Lester, Bob
Sent: Thursday, September 30, 2010 11:30 AM
To: IBM-MAIN@bama.ua.edu
Subject: errno2 values
Hi
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Ram Study
Sent: Wednesday, July 07, 2010 10:35 AM
To: IBM-MAIN@bama.ua.edu
Subject: Network Data Mover
Is there any document for NDM.
I have used CF and SS alone.
Any Idea
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of George Rodriguez
Sent: Wednesday, February 24, 2010 8:24 AM
To: IBM-MAIN@bama.ua.edu
Subject: What is FDBMSPLU
Does anyone on the list know what this is:
+FDBRC1211I SYMPTOM
.
Rex
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Lester, Bob
Sent: Monday, February 08, 2010 10:32 AM
To: IBM-MAIN@bama.ua.edu
Subject: SMS error message IGD17051I. Why?
Hi,
I'm sure I'm missing something, but I can't
Hi John,
Yes, I'm seeing that now.
Thanks to you (and RS, Binyamin, Rex, David too!)
Thanks,
Bob Lester
Systems Storage
Oppenheimerfunds
303.768.3504
bles...@oppenheimerfunds.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Hi,
I'm sure I'm missing something, but I can't see it.
Given this DD:
XXFILEOUT DD DSN=PDSN..PGSTRIP.UA.MFDE0S0G,
XX DISP=(,CATLG,DELETE),
XX UNIT=SYSDA,DATACLAS=SMS,
XX DCB=(RECFM=UA,BLKSIZE=182)
IEFC653I SUBSTITUTION JCL -
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Russell Witt
Sent: Tuesday, January 12, 2010 7:47 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Replace VTS with a tape less appliance
Bob,
What you might want to think about instead
. The VTS we're working with just
takes
a VOLSER list from CA-1.
On your second point, we're actively working with our vendor to
provide a 7-day (configurable?) no-scratch period AFTER the VTS gets
these VOLSERS from CA-1. More to come on that.
Regards,
Bob Lester
Bob,
Can't you use
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Pinnacle
Sent: Monday, January 11, 2010 7:51 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Replace VTS with a tape less appliance
Buy lots of excess capacity. As these tapeless systems fill up,
Hi Mark,
Indeed it does. We have a report distribution system on our
mainframe. It creates thousands of very small ESDS files. We were
constantly filling up VTOC, VTOCIX, and extending like crazy on the
VVDS.
We ended up using very large values for these volumes.
INIT UNIT(465E)
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Chris Mason
Sent: Monday, December 21, 2009 9:21 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Portable data centers (was RE: Small Server Mob
Advantage)
Indeed I remember hearing about a 360/30
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Ken Porowski
Sent: Tuesday, December 01, 2009 3:19 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Date / Time simulation?
2010 may be bad enough
Temporary dataset names will begin with SYS10ddd
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Tom Marchant
Sent: Thursday, September 24, 2009 7:24 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: RES: JES3 SDSF
I sometimes still refer to z/OS as MVS.
Tom Marchant
Me too!
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of esmie moo
Sent: Friday, August 07, 2009 9:15 AM
To: IBM-MAIN@bama.ua.edu
Subject: REPORT OF NOSCRATCH GDG DSNS
Gentle Readers,
Is there a way to produce a list of GDG disk dsns
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of esmie moo
Sent: Friday, August 07, 2009 10:18 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: REPORT OF NOSCRATCH GDG DSNS
Bob,
We have CA-DISK. What command should I use? I get the
Hi Folks,
Has anyone out there put up this solution to replace real (3590-1)
tape drives?
If so, I'm wondering how it is configured to work with SMS. Would
anyone be willing to share SMS setup for this beasty? I'm being told
that it doesn't require OAM and that I should define it
CA-DISK
is not in this particular partition, however, the disks are visible
in another partition where CA-DISK is installed. Can I run your
examples from that partition?
--- On Sat, 8/8/09, Lester, Bob bles...@oppenheimerfunds.com
wrote:
Hi Esmie,
I don't think you'd want to run
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of esmie moo
Sent: Friday, August 07, 2009 10:46 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: REPORT OF NOSCRATCH GDG DSNS
I ran the job but received errors which would explain why. Just to
[mailto:ibm-m...@bama.ua.edu] On Behalf Of Lester, Bob
Sent: Friday, August 07, 2009 11:31 AM
To: IBM-MAIN@bama.ua.edu
Subject: Luminex / Data Domain
Hi Folks,
Has anyone out there put up this solution to replace real
(3590-1)
tape drives?
No, but I'll try to answer the following
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Steve Comstock
Sent: Friday, July 17, 2009 4:36 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Offload work to zIIP with zPRIME
Eric Chevalier wrote:
On 17 Jul 2009 06:30:15 -0700,
Hi All,
I'm wondering if anyone has run into this.
We back up VSAM files (to DISK) using CA-FAVER 4.3 SP1. The output
disk files get assigned a data class that is extended format
(non-compressed). The block size being set for the output file is
27998, which appears to be bad for
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Gibney, Dave
Sent: Saturday, May 23, 2009 9:41 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: FTP and SMS (and DYNALLOC)
I just read that in detail again. The automount lead me to
Hi Greg,
No joy, I'm afraid. Set it up as documented, but get the same error.
I think I'm getting bit by this statement in the doc.
---snip---
Volumes in dummy storage groups cannot be used when performing
volume allocations. For example, the following DD statement,
where DUMMY1 is a
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Ted MacNEIL
Sent: Saturday, May 23, 2009 7:34 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: FTP and SMS (and DYNALLOC)
No joy, I'm afraid. Set it up as documented, but get the same
Hi Folks,
I'm in the middle of an SMS conversion at z/OS 1.9.
We have an ftp batch job that reaches down to a squatty box and pulls
some data.
The LOCSITE parms are:
LOCSITE LRECL=8996 BLKSIZE=9000 RECFM=VBA +
unit=sysda volume=SYST01 cyl pri=20 sec=30
Hi Dennis,
Nope, I checked that. It appears that the volume specified on the
LOCSITE VOL= parameter must exist? It can't be redirected? Can you
confirm? (Or am I doing something stupid?).
Thanks for the reply.
Thanks!
BobL
-Original Message-
From: IBM Mainframe Discussion
Hi Dennis,
Ah, there's the rub you see. :-)
I'm trying to do this without changing existing control cards.
Thanks!
BobL
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Roach, Dennis (N-GHG)
Sent: Friday, May 22, 2009 1:55 PM
Hi Dave,
Data is pulled via ftp in batch to new DSN:
PFDT.TSREL.OPPLZDCK.PULLOUT.SUN, which matches this DC FILTLIST pattern:
SYST_NEWINCLUDE ( PFDT.** )
The DC ACS does this:
WHEN (ALLVOL NE ''
DSN = SYST_NEW ) DO
SET DATACLAS= 'DCSTAND'
EXIT
Hi Dave,
Well, that makes me feel somewhat better. I'll keep looking, and
thanks for the suggestions.
BobL
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Gibney, Dave
Sent: Friday, May 22, 2009 3:17 PM
To: IBM-MAIN@bama.ua.edu
of volumes
no
longer connected to a system. Dummy storage groups allow existing
JCL to
function without having to be changed.
HTH,
Greg
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Lester, Bob
Sent: Friday, May 22, 2009 4
Hi Folks,
Does anyone out there have anything that will 'mass-change' GDGs from
NOSCRATCH to SCRATCH?
Thanks!
Bob Lester
Systems Storage
Oppenheimerfunds
303.768.3504
bles...@oppenheimerfunds.com
--
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Ulrich Krueger
Sent: Monday, May 18, 2009 11:07 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: GDG tool?
Lester,
I have some old SAS-code that will do the trick.
It reads catalog records
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Fatemi, Reza
Sent: Friday, May 01, 2009 1:09 PM
To: IBM-MAIN@bama.ua.edu
Subject: Anyone Know of a Good Pocket Calculator Like HP with Hex
capabilities
Also it should do Scientific
Hi John,
That's AbendAid/MVS.
BobL
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of John McKown
Sent: Monday, April 06, 2009 9:48 AM
To: IBM-MAIN@bama.ua.edu
Subject: UMID of AAJESTA on z/OS 1.8 JES2
I am applying some
Many thanks! That is it. Now to research what I need to do with
AbendAid.
This is becoming a real PITA. Especially since everything just
works on my
sandbox. Unfortunately the real world is a 2 system sysplex and I
must
first upgrade one, then the other.
--
John
Hi John,
Lesse,
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Barkow, Eileen
Sent: Friday, February 27, 2009 9:27 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: CEECRINI+X'2BC' abend S0C4-10 in CICS/TS 3.2
see if CICS ptf UK40899 is on the system.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of George.William
Sent: Thursday, February 26, 2009 3:35 PM
To: IBM-MAIN@bama.ua.edu
Subject: Extra! emulator - highlight configuration
We use Attachmate's Extra! 3270 emulator client
-Original Message-
From: IBM Mainframe Discussion List
[mailto:ibm-m...@bama.ua.edu] On Behalf Of Marilyn Allmond
Sent: Thursday, January 29, 2009 5:27 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: EKM on Z/os Drive on iSeries
Is aes0001 an alias associated with the tape
Hi All,
I've got a bit of a problem with EKM. We're z/OS 1.9, using EKM with
Java 1.4.2 (sr10). We're using a JCEKS keystore
Library (TS3100 w/ LTO4 drives) is attached to an iSeries 520 with
V5R3.
iSeries SysAdmin can write tapes, but can't read them.
Upon viewing the
Hi Folks,
I've got a product (CA-Allocate) that allows dynamic increasing of
the allocation of System Temporary datasets. This current state.
As I move to SMS, I see that only a STORCLAS is assigned for these.
If I understand correctly, this means that the space coded in the JCL is
Hi Ted,
I do have other SMS-managed data. I'm just doing the conversion a bit
backwards. ;-)
I can see that the issue, in my current environment, is that I tell
VAM (CA-Allocate) to bail out of it's ASR (EXIT CODE(0)) if it sees a
non-null Storage Class. We are hoping to be able to
-Original Message-
From: IBM Mainframe Discussion List
[mailto:ibm-m...@bama.ua.edu] On Behalf Of Gibney, Dave
Sent: Tuesday, January 20, 2009 2:41 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: SMS and System Temporary Datasets
Are you assuming SMS will manage the 'extent
Hi RS,
1.
BobL
--
This e-mail transmission may contain information that is proprietary,
privileged and/or confidential and is intended exclusively for the person(s) to
whom it is addressed. Any use, copying,
-Original Message-
From: IBM Mainframe Discussion List
[mailto:[EMAIL PROTECTED] On Behalf Of Darth Keller
Sent: Wednesday, November 05, 2008 9:57 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Problem Allocating DSN - 5000 CYl
Since your are attempting to allocate a multi-volume
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Joseph H Winterton
Sent: Monday, September 29, 2008 6:16 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Omegamon II MVS V520 on z/OS 1.9
Hi Marc,
We did not build our z/OS 1.9
Hi All,
Is anyone out there using CA-DISK (DMS) and MOD54 DASD as disk
archive volumes?
Any problems?
Thanks!
Bob Lester
Technical Services
Systems and Storage
OppenheimerFunds
--
This
-Original Message-
From: Shmuel Metz [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 03, 2008 1:16 PM
To: Lester, Bob
Subject: Re: Old hardware (Was: Mainframe programming vs the Web)
Offline.
In
[EMAIL PROTECTED], on
05/15/2008
at 04:54 PM, Lester, Bob
EXIT CODE(22)
END
Which is 299 characters (spaces counted).
Is there a way around this so I can produce more lines? Or do I
have to
reduce my content until it is at or below 110 characters?
If it hurts, don't do it. :-)
What's wrong with something like this:
Hi Folks,
Can someone point me to information on what the compression
percentage is for datasets allocated with a data class that specifies
compaction=Y?
Thanks!
Bob Lester
Technical Services
Systems and Storage
OppenheimerFunds
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of [EMAIL PROTECTED]
Sent: Thursday, August 07, 2008 4:17 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: SMS and DFDSS
SAS supports DSNTYPE=LARGE for both libnames and filenames starting
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Scott Barry
Sent: Friday, August 08, 2008 10:01 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: SMS and DFDSS
The DSNTYPE attribute of LARGE is not equivalent.
Scott Barry
Hi Folks,
I'm trying to assign a DATACLAS to some existing SMS datasets that
don't have one, so they can extend to multiple volumes.
I've done a logical DFDSS dump of the datasets (all PS).
I've deleted the datasets that were dumped.
I've Updated my DATACLAS ACS routines to
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of John Kington
Sent: Thursday, August 07, 2008 9:40 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: SMS and DFDSS
DSS comes in the recover environment and bypasses the data class acs
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Traylor, Terry
Sent: Thursday, August 07, 2008 2:03 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: SMS and DFDSS
Bob,
I believe you cannot add or change a dataclass to an existing
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of John P Donnelly
Sent: Thursday, May 29, 2008 9:52 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: CA Security Certificate
good morning, we are being greeted with the following trying to
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Rob Schramm
Sent: Tuesday, May 27, 2008 8:37 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Free z/OS webserver
The response was For now, you cannot order IHS Apache without having
a
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Shane
Sent: Friday, May 23, 2008 6:13 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Free z/OS webserver
On Fri, 2008-05-23 at 07:40 -0400, Rob Schramm wrote:
IBM HTTP Server
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Sorensen Henrik (KSFI 442)
Sent: Friday, May 23, 2008 8:26 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Free z/OS webserver
I read the attached .pdf and it *seems* to indicate that
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Rob Schramm
Sent: Friday, May 23, 2008 4:04 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Free z/OS webserver
The Abstract is written in such a way to make it plausible to assume
that
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Rob Schramm
Sent: Tuesday, May 20, 2008 2:59 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Free z/OS webserver
And if you get Jzos (which comes with the JAVA 1.5 and above) then
you
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of William H. Blair
Sent: Thursday, May 15, 2008 7:28 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Old hardware (Was: Mainframe programming vs the Web)
The System/360 Model 75 was not
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Shmuel Metz (Seymour J.)
Sent: Thursday, May 15, 2008 2:13 PM
To: IBM-MAIN@BAMA.UA.EDU
It was DOS/360, on a 360/75, at the University of Waterloo.
Hi Shmuel,
Do you know
Hi All,
Not sure if it's been mentioned but if the original poster has
CA-DISK (or something similar?), it's a breeze with the MOVE function.
Since it's dataset oriented, it's slow, but it works!
Hope this helps.
Bob Lester
Technical Services
Systems and Storage
OppenheimerFunds
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Johnston, Robert E
Sent: Thursday, August 16, 2007 3:35 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: CA to IBM TCP conversion
I don't get much direction here from mgmt. My orders
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Steve Comstock
Sent: Thursday, August 02, 2007 4:14 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: How old are you?
Jeez! I turned 63 in March. I _can't_ be the oldest guy on
the
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Bruce Black
Sent: Thursday, June 14, 2007 8:38 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Patents, Copyrights, Profits, Flex and Hercules
Vary true ... There used to be a product (it may still
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Ted MacNEIL
Sent: Thursday, June 14, 2007 12:32 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Patents, Copyrights, Profits, Flex and Hercules
now Sterling Commerce) that markets NDM (now
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Gregory, Gary G
Sent: Thursday, June 14, 2007 3:54 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Patents, Copyrights, Profits, Flex and Hercules
Steve, I started at Sterling Commerce a few weeks after
Hi Bruce,
Thanks for the info, I'll give it a try!
Bob Lester
Technical Services
OppenheimerFunds
Centennial, CO
USA
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Bruce Black
Sent: Friday, June 08, 2007 11:10 AM
To:
Hi All,
We're in the process of converting off CA-Allocate (VAM to you
Silverbacks) to SMS.
With VAM (Since I AM a Silverback), you can use a DDNAME of VDSDIAGS
to trace the allocation thru the selection routines. This helps to see
why a dataset didn't go where (I thought) it should
Hi All,
I'm converting from CA-Allocate CA-Disk to DFSMS and DFSMSHSM.
We're at z/OS 1.7.
In my CA-Disk environment, I have multiple L1 migration volume pools.
For example, Production data is migrated to L1 DASD that is mirrored to
our DR site, while test/devl data is migrated to
1 - 100 of 137 matches
Mail list logo